Any iviews not getting opened from the portal content.

Hi,
Recenlty i found that the any of the iviews of the portal content are not getting opened.When i click on any of the iviews a blank page pops up.But the iviews when dispayed in the top level navigation gets opened there.Even the personalize option in the masthead pops with a blank screen.
Am not able to figure where the problem is exactly.Pls help.
Regards.
Adity.

We are using IE-7 and as per our clients requirements the portal has to be run on IE-7.May be this may be the browser problem but what settings i need to do to make all iviews running fine.This problem was not earlier but i am seeing this since a week.And all iviews pop up with a blank screen.
Regards
Adity

Similar Messages

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Error: Page Metadata could not be obtained from the Portal database.

Hi,
Maybe some one can help me with this.
After my installation (oas portal 10.1.4) I changed my URL in portal and sso.
modplsql : http://<webserver>:<port>/pls/portal/htp.p?cbuf=test --> its working fine. I got test
Parallel Page Engine (PPE) : http://<webserver>:<port>/portal/page --> its working fine. I got PPE is working.
http://login.hostname:port/oiddas --> It`s working fine
http://login.hostname:port/sso --> It`s working fine
http://hostname:port/portal/page/portal/TOPLEVELSITE --> It's not working I got in firefox Error: Page Metadata could not be obtained from the Portal database. In explorer i got HTTP 500 error.
I checked my application.log and I got this:
**portal: id=45342345678,1 ContentFetcher Unexpected Exception Request Failed:oracle.webdb.dispatcher.DispatcherException: I/O Error dispatching request name=content-fetcher19 label=pageMeta url=http://<webserver>:port/portal/pls/portal/!PORTAL.wwpob_page.show/TOPLEVELSITE time=1ms timeout=60000ms process=Dispatching**
Maybe some one can help me to solve this threat.
Thank you.

C@rlitos wrote:Edited by: C@rlitos on Sep 30, 2009 6:14 PM
Hi!!
To register the url in portal I used this doc 434795.1 - 558634.1 from metalink.
http://download-west.oracle.com/docs/cd/B14099_17/core.1012/b13998/variants.htm#CBDBDJHD
I verified and i got this:
LSNR_TOKEN
SITE_TOKEN
SITE_ID
LS_LOGIN_URL
URLCOOKIE_VERSION
ENCRYPTION_KEY
ENCRYPTION_MASK_PRE
ENCRYPTION_MASK_POST
U
oldurl.com:7781
XY776FQWDCY4EFF
8AC54EFF
http://oldurl.com:7780/pls/orasso/orasso.wwsso_app_admin.ls_login
v1.2
2FWERFW768767866
6B4DEERWF87W87897E89WRF897W3FC9
F0FEC6AREW76786WEFWER76F8968695
N
newurl.com
1RG8IYA4F9D2E30A
F9D2E233A
http://newurl.com/pls/orasso/orasso.wwsso_app_admin.ls_login
v1.2
B32852345661513F0
1A5DTR546EYEYEHEHSVSGFB44C
A33RTWERGERGERGREFWERF8
N
I havent create new token values.
Edited by: C@rlitos on Sep 30, 2009 6:14 PMHave you configured your Infra with a new hostname on a different port ?
Unless, you had installed your OAS with custom ports, and have not used the default ports for the components, your lsnr_token for the newurl has a problem. orasso and sso should be configured at 7777, and by default they configure at that port. That means that your newURL should be pointing to http://newurl.com:7777/pls/orasso/orasso.wwsso_app_admin.ls_login for the ls_login_url.
This might have happened due to some error in registering your portal with the SSO. Have you used custom ports for your installations?
Additionally, did you configure your newurl on port 80?

Adobe Form not getting displayed on the portal

Hi,
From the MSS portal when I run the process, the associated adobe form(using HCM) doesn't get displayed on the portal. Initially the problem was with higher version of acrobat reader but now it is solved. Now I am not getting any error or warning but adobe form still not getting displayed.
Please help.

Later

Users details not getting populated in the portal tables..

Hi,
We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

Files not getting picked from the FTP site

Dear All,
We are having one File-XI-RFC scenario running in XI-PRD Server. Sometimes what happens is that files available in the FTP site are not getting picked by the File adapter. I have checked in the adapter monitoring and communication channel is active there. Also, there are no errors regarding this in SXMB_MONI. I have configured alerts also but for this case no alerts are getting trigerred. And also when I am reactivating that particular communication channel then that file is getting picked instantaneously.
Can anybody please guide me on what might be the real cause for this as this error is happening randomly.
regards,
N.Jain.

HI,
Have you used per File transfer parameter in FTP Communication channel.
It makes the FTP adapter inactive in ideal time.
So add the poll interval may be for every 30 mins or something like it. It will forcefully activate the FTP port after every 30 mins. You may have the poll interval for every 1 min. Only the files to be picked up are getting logged in in XI monitoring.
So there will be no garbage collection of unwanted messages in Monitoring.
Thanks
Swarup

Chat user is not getting message from the other users

In my application when user [A] initiate the chat with user[B] , I am facing following issues
-          User[B] is not getting initiation notification so that I am unable to open chat pod for user [A] on user[B] application
-          Due to above problem , User[B] not getting any message sent by the User[A]
-          User[A] can send only one message and it is displayed on simple chat pod
when User[A]tries to send more then one message it is not displayed on simple chat pod but on the console I can see the messages
following is sample code
public function connectChat() :void {
_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
public function connectChat() :void{
trace('connectChat');_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
//Creates the nodes if they don't exist
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
/*** Checks if a chat is going to be started with this specific user
protected function onItemReceive(event:CollectionNodeEvent):void {
var item:MessageItem = event.item;
var openChatEvent:OpenChatEvent = OpenChatEvent.ToOpenChatEvent( item.body, OpenChatEvent.OPEN_CHAT );
switch (item.nodeName) {
case START_CHAT_LIST:
trace("Starting Chat Notified");
if( openChatEvent.userId && openChatEvent.userId == this.connectSession.userManager.myUserID ){
this.dispatchEvent( openChatEvent );
if( this._collectionNode.isSynchronized )
this._collectionNode.retractItem( START_CHAT_LIST, openChatEvent.roomId );}
break;}
/*** Publishes a request for someone to join a chat
public function publishChatRequest(notificationEvent : NotificationEvent) :void {
if( this.connectSession.userManager.getUserDescriptor( notificationEvent.userID ) ){
var openChatEvent:OpenChatEvent = new OpenChatEvent( OpenChatEvent.PUBLISH_CHAT,null,notificationEvent.sharedID, notificationEvent.userNotificationList, null, notificationEvent.userID );
if( this.presenceUsers )openChatEvent.descriptors =
this.presenceUsers; _collectionNode.publishItem(
new MessageItem( START_CHAT_LIST, openChatEvent, openChatEvent.roomId ) );}
else{
Alert.show(
"User "+ notificationEvent.userID + " is not logged in.", "Publish Error" );}

A) are these methods copied twice in the code here on purpose?
   connectChat() and onSynchronizationChange is repeated in code due copy paste mistake
B) are both users subscribing to _collectionNode right away? Do each of them
get to onSynchronizationChange?
   Yes , each of them get to onSynchronizationChange
C) If you put a breakpoint in onSynchronizationChange, do you see the node
get created? Do you see it in the dev console?
Yes , it is creating a node
D) Is user B receiving an onItemReceive at all? Is user A?
Yes , it is creating a node
Now both the user getting chat message, have following issue
When user A initiate the chat with user B this action is not opening chat pod / window on user B end which shows user A has initiated chat with user B
But when user B click on user A name to initiate the chat, this action opens a chat window and user B can see message send by user A
Above scenario is not normal chat behavior in which other user gets the notification of chat . what could be the problem

ONLY ONE FIELD DOES NOT GET PREPOPULATED FROM THE DATABASE

I would really, really appreciate if someone can comment or suggest something that would help with the resolution to the issue I am currently experiencing.
Simple sample form that explains the issue can be accessed from the link below.
How to test the form:
Open the form.
Click on the yellow button to add new Task.
The problem is with Additional Product fields ( in blue). You can add as many of them as you want by clicking on the Red button with the +. Add some data and uploade in database. When you download it from the database, data will come back fine for all of them, except for the first one.
Any ideas or help would be greatly appreciated.
https://acrobat.com/#d=2vFWOlm56FmrC4owzpfHew
The code is behind the Red button with the +. Very simple. Perhaps is the indexing issue with the database. I do not know enough about it, to be able to send any suggestion to the DB guy.
According to the DB guy, data uploades without issue. It is the blank field when the form with data is downoloaded.

It might be related to http://forum.java.sun.com/thread.jspa?threadID=583466&messageID=2988344

One socket and two ports, not getting response from the server

Hi everyone,
I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port. My problem is that i can't create another socket using this port and therefore not getting the response from the device.
Can you people tell me how to handle such socket communication in java ?
Thanks in advance.

I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.Are you sure? That's not usual. It would be usual for it to use the same port for listening, reading, and writing.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port.I would try just reading from the same socket you are sending on. I suggest you have misunderstood how the device works.

When creating new webpart page not getting logo from the masterpage

Hi
when I am going to creating new page.aspx then it inheriting the logo from the master page
BUT i AM GOING TO CREATING NEW WEB PART PAGE.ASPX THAT IS NOT GETTING THE LOGO FROM THE MASTER PAGE HOW CAN I SOLVE THIS PROBLEM

In a Publishing environment there are two master pages. One is used for all the pages stored in the pages document library. Those pages use the Site Master master page. Other pages, like web part pages, use the System Master page. If
you go to the Site Settings you will see a link called Master Pages in the Look and Feel section. When you click on that link you will see a page where you can choose which master page to use for the Site Master and the System master. I suspect
you are using a custom master with a logo for the Site master and a different master for the System master. You can try setting the System master to be the same as the site master or make sure that your logo is also included on the System master.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Descriptor properties not getting updated from the BPEL console.

Hi,
I am facing issues with updating the descriptor properties, like path for the rejectedMessageHandlers for file adapter, from the BPEL console. The issue is indeterministic in nature, meaning sometimes it happens and sometimes it doesn't, but majority of the times it does.
I tried this putting the BPEL process in the turned off sate as well, but no good.
The BPEL PM version is 10.1.2.0.2
Thanks,
Prem.

Hi Clemens,
Could you please update me on this issue, if this is a bug.
Thanks & Regards,
Prem.

Not able to display the Portal Contents

Hi
I created new user and assigned only one role called "Content Administrator"
When i loggned using that user then i am not able to see the contents under the browse tab.
Please let me know what to do if i want get the contents under the browser tab;
Thanks
mmukesh

Is your laptop's Internet explorer version is IE 7.0? If thats the case then it might be the issue. Portal doesnt work well with IE 7.0 and you get some problems like these a lot of times. You can correct this to include IE 7.0 also but that you have to configure via the Visual Admin. For now to confirm this - just try checking IE version - and if its 7.0 try installing IE 6.0 to see whether you are still getting the error.
You can see note number 991449 to find out how you can include IE 7.0 also to your portal setting to eradicate this error. Well - if at all thats the cause. Please verify that before doing anything.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh

Document not getting opened from portal

Dear Team,
We have a CRM role, in which we have created a BSP application (crm_bsp_frame) for Account Management.
There we have a Attachments tab, from which we are attaching documents. We are able to attach the documents but when we click on the attached doc, it's not opening neither it's throwing any errors.
We want to view the attached doc, so how to open it ?
Kindly please help me in this scenario.
Regards,
Nikesh Shah

Hi,
Have you set your SMTP server in portal.
Sysadmin->SysConfig->UM Configuration->Notification E-Mails-
Thanks & Regards

Personalize settings not getting saved in the portal

Hi all,
In the SRM portal, I need to personalise the settings according to my needs.
In the list of Shopping carts displayed in the POWL i dont want all the columns to be displayed, so I selected the columns that I wanted and saved the layout. But on logging off and logging in again the newly created and saved layout is not present.
Please help.
Regards,
Catherine

Hi there
can you tell me the OSS note number please?
Thanks
Vikki

Any iviews not getting opened from the portal content.

Similar Messages

Maybe you are looking for