Any known incompabilities Windows 7 and Premiere Elements 7?

Premiere Elements 7 works really fine in Windows 7, until getting to burning to dvd or to harddrive. It starts prepearing for burning, then shuts down the whole program. Time after time I have tried, but it continues shutting down. Is it a incompability issue?

I have just this week bought the DL version of PrE 8 (after running the trails for a little time). At this point, I have very little experience with PrE (any version), have not installed the purchased version, nor tried to burn to disc with the trial. I have, however, been running Win7 64 bit since it was in beta and am now running Win7U 64 bit RTM.
A few things I would suggest are:
1) Try running in compat mode. You can choose from several modes, including Vista, Vista SP1 & SP2, XP Sp..., etc.
2) If #1 does not help, try running PrE7 as admin.
If none of the above works, you could try uninstalling and reinstalling, but before reinstalling, right click on the setup file and choose a compat mode.
Aside from posting your questions here, you could also post at http://www.sevenforums.com/
MSA

Similar Messages

Windows 8 and premiere elements 10

I have premiere elements 10 on disk. Will not load on my new computer with windows 8. Anyone know what I can do about this. Spent hours looking for an answer, came up empty.

Sandi254
Thanks for the reply.
We can move forward at whatever level you want. The important thing is that we get you moving forward with your Premiere Elements 10 projects on your Windows 8 computer. That Windows 8 computer could be 32 bit or 64 bit system. For now, I will assume 64 bit unless you tell me otherwise.
If you are working from an installation disc, then I am guessing that you purchase Premiere Elements 10 in a boxed version. In that case, you probably have several discs in that packaging. I suspect that you may have selected the wrong disc.
Let us check that out first. If you have Premiere Elements 10 and you want to install that on Windows 8 64 bit system, then you use the disc that should be labelled DISC 2 of 5. Only after you have installed the program, then you use DISC 4 of 5 to install the Content (Instant Movie Themes, Disc Menus, etc).
So, first order of things...
a. Can you confirm that you have 64 bit system for your Windows 8? Yes would help but answer is not necessary if you do not know at this time. We should find the answer moving forward.
b. Can you insert the Premiere Elements 10 DISC 2 of 5 and move forward with the installation of the program? Do you see the serial number included on the case for the discs?
c. After you install the program, can you use DISC 4 of 5 to install the Content?
There are a few pitfalls to watch out for...
a. You probably have discs for Windows or Mac computer. You only want the right one for a Windows operating system.
b. There are disc there for a Windows 32 bit or 64 bit system. You want the one for the 64 bit system.
Please read the information on each of the disc if you have not already.
Please let me know if you are OK with the details just written and if you can work with them.
Thanks.
ATR

Will Adobe Photoshop Elements 10 and Premiere Elements 10 work on Windows 8.1

Will Adobe Photoshop Elements 10 and Premiere Elements 10 work on Windows 8.1

Hi,
Here is my reply:
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
Premiere Elements 12
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
Windows 8.1.
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
Worked in windows 8. No plug-ins added, etc.
•Are you using an account with Administrator Privileges?
Yes
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
Crashes after loading
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
All up to date
•If you are getting error message(s), what is the full text of the error message(s)?
Please log-in with an administrator account to use Premiere Elements
•What other software are you running?
None
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
4gb ram. 30gb free space on internal SSD drive.
•Which version of Quicktime do you have installed?
Latest
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
Radeon HD 3400
What is your exact graphics adapter driver version?
8.970.100.0
Have you gone to the vendor web site to check for a newer driver?
Yes
P.S. Premiere Pro works on my system
Thanks

Is Photoshop elements 10 and Premiere elements 10 compatible with windows 8.1?

Is photoshop elements 10 and premiere elements 10 compatible with windows 8.1? I am upgrading from XP and am trying to determine if I should go to 8.1 or windows 7?

MakoM
Photoshop Elements 10 and Premiere Elements 10 are compatible with Windows 8 or 8.1 64 bit. I have them installed on those operating systems and no problems. My video card is Intel HD Graphics.
But, a major question is what video card will be used? There is a major issue with Premiere Elements 10 users whose computers use a NVIDIA GeForce video card. It is fixed by rolling back the driver to about May 2013. This is a user to user fix. Neither NVIDIA nor Adobe has offered one. Full details are the Announcement at the top of the Premiere Elements Forum
http://forums.adobe.com/community/premiere_elements?view=discussions
Overview of that situation
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please let us know if we can be of assistance in this matter.
Thank you.
ATR

(Photoshop and Premiere Elements 9.0) + (Photoshop cs5 extended) installed all at once any issues?

Hello,
1. I have Photoshop and Premiere Elements 9.0 currently installed. I would like to download and try Photoshop cs5 extended. I know they have different Camera Raw versions and other items different. Will they conflict with each other in any way? Will the newer camera raw support for Photoshop cs5 extended break the older camera raw support in Photoshop and Premiere Elements 9.0?
2. Was also thinking about downloading and checking out Lightroom trial, would the organizer in Photoshop and Premiere Elements 9.0 conflict at all with the bridge or whatever is used in Lightroom?
3. I love the quick touch ups and teeth whitening etc I can do in Photoshop Elements 9.0, is there a comparable tool in Photoshop cs5 extended or Lightroom? I mean I am sure you can do anything in Photoshop if you're good enough at it. But I like that in Photoshop Elements 9.0, it has the dummy version where I simply point highlight and click.
Thank you for your time,
J

Thank you Barbara B.,
Do you know if there is a basic reference somewhere on adobe for performing tasks on both pieces of software? Thanks to you I know how to replace the teeth whitening function, but what about for instance the "slimming" tool, or the eye lash darkening tool etc? I know I can google each tool I am sure. But is there a single "bible" like reference for the various commands or tool functions shared between the two? Are there any books you recommend etc?
Thank you for your time,
J

I accidentally purchased Adobe Photoshop and Premiere Elements for Windows, but I need it for Mac. Please advise.

I accidentally purchased Adobe Photoshop and Premiere Elements for Windows, but I need it for Mac. Please advise.

Return, cancel, or exchange an Adobe order

Hi, I have bought Photoshop and Premiere Elements for windows, but I now have a iMac and would like to deactivate on the PC and transfer the programs to the iMac. Is that possible even do I bought it for Windows?

Hi, I have bought Photoshop and Premiere Elements for windows, but I now have a iMac and would like to deactivate on the PC and transfer the programs to the iMac. Is that possible even do I bought it for Windows?

Normally an Elements purchase is good for both platforms. You should only need to download and install the Mac versions of the programs and install and activate them using the serial number you have from the opriginal purchase.

Installing photoshope elements 12 and premiere elements 12 on Mac/windows

I own a Mac with bootcamp installed. so I have a mac and windows 7 (one computer)
I have installed photoshop elements 12 and premiere elements 12 on mac
and want to install it on the window side.
On the windows 7 side I do have photoshop elements 7 installed but, what to uninstall and
put in 12.
12 has been registered
and so has 7

All versions of Elements can coexist, so you don't need to uninstall v7. Also note Barbara's reply in your other discussion concerning licensing.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Can i load elements 5 and premiere elements onto window 8.1

can I load photoshop elements 5 and premiere elements 7 onto window 8.1

Valdav27 you are welcome to try if you have the installation files. Photoshop Elements 5 and Premiere Elements 7 were never designed to function under Windows 8.1.
If you have the installation media then you can copy the files to a USB drive and attempt to install on your new Windows 8.1 computer.

Is there any "simple" documentation on the steps to download and install Photoshop and Premiere Elements V13? The downloads seems to work but there's nothing clear on what do you do next.

I've been messing with computers since 1958 and I've never seen such a mess as trying to download and install the recently purchased copies of Photoshop and Premiere Elements Version 13. Slow downloads? Sure, but I can live with that. But once downloaded, what next? Look for a xxx.exe file somewhere in the pile? Read the "ReadMe" file? All I seem to get is unzipping some files with nothing leading me into the proper steps. I can't even seem to get off the ground. Everything I touch unzips and just lies there. I hate to think I've gone dumb after all of these years, but "user friendly" this is not. My "Your order confirmation" sheet gives me "Follow the instructions below to start using it today" and the first three steps work as you'd expect. Step 4 states "After you have completed the download process, your serial number will be displayed in the download center." Step 5 is "You can log back into 'Adobe Account Management' in the future to re-download your product or retrieve your serial number. ...." I have no problem with my serial number but there seems to be a lot missing between Steps 4 and 5. It would be nice to have this information as pretty standard "stuff. Computers are supposed to do super stuff without a lot of time-consuming problems with a simple process like installing the software. I'm feeling a bit hostile about this but it is a time-consuming, frustrating process.

Justin created a guide to using Favorites. It will help you a lot with what you seek. He has a link to it in this thread.
http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/Exploiting-FiOS-TV-Favorites/m-p/9935

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an email with the serial number once the product was registered - But I never received this email. If anyone is able to help me with this issue - that would be great. the registration number is: PEPEP6-5578-6450-8871-9107 I am using a windows based system

If I were you I would first make sure CS6 was deactivated or signed-out. Then download Adobe's cleaner and remove cc, CS6 and any other creative application installed including Creative Cloud desktop application. Then install CS6 and use your CS6 serial number during the install to activate CS6 standard or extended which ever the serial number is for. CS6 Version 13.0 should the be activated. That level of CS6 is extremely bug ridden so be sure to the use CS6 menu Help>Updates to get CS6 updates. Windows should update to version 13.0.1.3 Mac to version 13.0.6. Not Subscription CS6 version 13.1.2...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Error Code: U44M1I200 when installing Photoshop Elements and Premiere Elements 12.1 update

I use Adobe Photoshop Elements 12 and Premiere Elements 12 on a Windows 8 computer. I just tried to install the 12.1 update and got an error code: U44M1I200. I would appreciate any help in why I got this error code and how I should proceed. Thank you.

Big HW a écrit:
I use Adobe Photoshop Elements 12 and Premiere Elements 12 on a Windows 8 computer. I just tried to install the 12.1 update and got an error code: U44M1I200. I would appreciate any help in why I got this error code and how I should proceed. Thank you.
http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html

Which files need installation for Photoshop and Premiere Elements 9

In the list of files for download for the Photoshop and Premiere Elements 9 Plus package that I just purchased,
(Windows 7) there is a single "Premiere Content ALL" file of ~4.2GB. There are also 6 files called "Premiere
Content 1" (and 2 2nd 3), and "Premiere Content 1 HD" (and 2 and 3).
After smooth installs of the PSE and PRE programs proper, in doing the install of the "Premiere Content ALL"
file, it seems like the "Content 1-3 and 1-3 HD" files were included in it (judging by the file nmes flashing on
the screen during the install, and in poking around in the install directory).
What I would like to know is: are the 6 Content 1-3 and 1-3 HD file included in the Content ALL file, and if so,
are they at the same revision level as what's in the Content ALL file.
I don't want to just try installing the individual Content files over the ALL file install, as that might well screw
something or other up.
I tried getting an answer to this on the phone with Adobe support, but could not get an unambiguous answer
from either of the two support people I spoke to.
Any help would be appreciated.
Thanks ...
/kim

Thanks for the reply.   The real question though was/is are ALL the files contained in the 6 separate content archive files
(Content 1, Content 2, Content 3, Content HD 1, Content HD 2, and Content HD 3) also contained in the single archive
file called Content ALL?
Since I was unable to get a definitive answer to that question, I went ahead and downloaded all 7 of the Content archive
files, extracted all of the archived files in the *.7z files and compared the timestamps and sizes of the files in the 6 individual archives to the timestamps and sizes of the files from the "ALL" archive.   The files within the 6 archives matched those
in the ALL archive.
And since the sizes of all 7 *.exe files are identical, I suspect they are all the same and simply invoke an unarchiver
for their respective 7z file, using their own filename as the argument to the builtin program.
The overall result is that I have verified to my own satisfaction that the contents of the 6 individual Content XX files
*are* contained within the single Content ALL file.
It would have been NICE if Adobe had bothered to TELL their customers that, so they wouldn't spend twice the time in
downloading 6 unnecessary files which in reality just duplicate the ALL file.   Plus in my case, spending an hour or
two verifying that the contents of the 6 files were also in the ALL file.   Sheesh.
C'est la vie ...

Unable to open Adobe Photoshop Elements and Premiere Elements

Yesterday I installed Adobe Photoshop Elements 9 and 11 and Premiere Elements 11 on my Computer (Windows 7, 64-bit) and first everything was alright.
But after a few hours I was not able to open one of them again. All I get is an error message to re-install the program again because of configuration error, "error:1".
I had that problem before and i tried about three times to re-install them correctly. Last time I used the compability mode to install and that was the only time they opened at least once.
Any ideas?

Adobe hasn't said whether it officially supports PSE 7 on Windows 7. But reports are starting to trickle in that PSE 7 works fine on Windows 7 for most people, though a couple people have reported crashes. My PSE 7 seems to work fine, though I primarily use PSE 8 now. This is all very preliminary, and we'll learn more as more people post here.

Cannot activate Photoshop and Premiere Elements 13 on Mac

my hard disk crash and I have to reinstall Mac OSX on my system. After new Yosemite OS installed, I restore all user apps and data from Time Machine. After entire, Elements Organizer 13 started to behave abnormally. The app open with a help request dialog window in the middle of the screen, and I cannot close it.
so I proceeded to uninstall Photoshop and Premiere elements 13 and a,so Elements a Organizer using built in Uninstaller
aafter uninstalled, I proceed to reinstall both app using the original app files ai download d when the apps were purchased.
it ask for serial number, I enter the serial correctoh but both app refuse to activate, stated that the serial cannot be validate and ask me to contact support
i do so and have chat with Adobe support for more than 30 minutes, no solution Offered which is so frustrating. I ask the tech support to provide me instruction an new serial key or method to solve this problem by mail. But there is no follow up at all.
what on Earth can I do to reinstall and activate both apps?
help pleaese. Adobe support is so disappointing.

I'm sorry to have to inform you that I am completely dumb! Therefore, any communication will be via e-mail. You can use <removed>, which is also my Adobe account.
Aggiornamento di Photoshop Camera Raw 9.0
Si è verificato un errore durante l'installazione di questo aggiornamento. Chiudete e riprovate più tardi. Codice errore: U44M1I210
Photoshop Camera Raw 9.0 update
It was an error during installation of this update. Close and try again later. Error Code: U44M1I210 "
Thanks for the assistance. My best regards.
Paolo

Any known incompabilities Windows 7 and Premiere Elements 7?

Similar Messages

Maybe you are looking for