Any Known Issues Btwn Au CS6, and Alesis I/O 26/Win7 64 Bit?

Back in '07 when I first purchased my Alesis I/O 26 interface it's driver was still much too buggy for Au 3.0; so I returned my Au 3.0. So, I still have my I/O 26 running on Sonar 8.5 / Win7 64bit very nicely, thank you. However, I want to upgrade my Au 1.5 up to CS6, and I'm trying to research (NOT ACCUSE) if anyone in the Au CS6 community has my same configuration, and if there are any compatibility issues I should know about.
Thanks,
GPL

Way back when, I did indeed uninstall and reinstall my Catalyst drivers, still no luck, still same problem.
Finally today, some 6 months later, I was again dealing with Photoshop Phone tech support for another hour or two, including much hold time, finally having the issue excalated, as all software and drivers seemed up to date, and yet all versions of the gpu sniffer program still could not identify my gpu.
After I got off the phone with them, I went to the AMD site and followed instructions on how to uninstall and reinstall their software. One step I had not thought of or tried was, after uninstalling the Catalyst software, repairing the .Net 4.5.1 framework through the Microsoft site before reinstalling the Catalyst software. It somehow seems that though the Catalyst installer software supposedly installs the .Net 4.5 framework, it cannot, unless the framework is already installed...
Anyway, this does seem to have finally gotten the 64bit Version of Photoshop to finally work on my desktop.

Similar Messages

Any known issues with Premiere CC and imported HDV clips?

I'm having consistent difficulty with Premiere CC playback of HDV video that originated in FCP 7. This was not an issue in Premiere CS6. The problem is dropout and pixelization which is consistent, pass after pass, and occurs at the same TC location on some clips. It is almost like some clips are corrupted in a consistent manner, while others are not, and don't seem to become corrupted.
For a variety of reasons, I still shoot HDV on a Z1U, and use an old FCP7 workstation to digitize media. I then import these individual video clip files into CS6. These are clips that play correctly in FCP, Premier CS6, and in the Finder, and Quicktime Pro, but not Premiere CC.
I have Dropboxed a sample clip to my service contact at AJA, and she is reporting the same issue with Premiere CC. (The technical support at AJA is the best I've experienced in over 30 years of video production).
The same issue presents itself with HDV clips that were converted to such from .m2v via Clipwrap.
Any other types of media play correctly within Premiere CC. For example, I have a CS6 project that is nothing but After Effect CS6 anims comiled into a program in Premiere CS6; it plays perfectly. So do any media that Premiere CC puts through its own conversion or import "routine," like AVCHD. Even XDCAM clips that went into FCP via XDCAM Transfer play well.
Any thoughts?

Tim,
I would assume the clips work fine in FCP7, so you're not totally busted. Maybe try using Compressor or AME, like the other guy said, to export them in another format; I'd recommend Apple ProRes 422. Fallback is to work in FCP7, as the tapes are gone.
When I 1st posted this problem, I left for vacation. I saw briefly that someone suggested a plugin in another reply, but I haven't had a chance to pursue that yet. I'm in northern Michigan (USA) with limited access to email. I'll do some follow up this Monday when I return. Good luck!!
Sent from my iPhone
Phil Mariasy
Allied Media Group
[email protected]
419-297-2730
151 N. Michigan
Ste. 300
Toledo, OH 43604

Any known issues running Forms 10gR2 and 11g DB?

I'm planning to upgrade my DB, but not my Forms. Thanks

Forms 10.1.2 has been certified with v11g of the database. See this document

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

To answer the obvious question. No. None that I've seen. But it may depend on what you mean exactly?
Connecting to file sharing service - None that I've seen
Connecting to Open Directory (assuming proper configuration) - None that I've seen
Using the Server's Mail Service (assuming proper configuration) - None that I've seen
I can say the same about anything else the Server may or may not be offering.

Any known issues with Essbase 64 bit and other components as 32 bit

Hi Everyone,
Are there any known issues with 64 bit Essbase and other components (Planning, EAS, Provider services, EAS, Workspace and Reporting) in 32 bit?
Version is EPM 11.1.1.3
The reason for choosing ESSBASE 64 bit is of course performance. We decided to stick to 32 bit for the web applications due to some known issues and bitter experiences in past in this version with 64 bit web deployments.
OS is Windows 2003 Server (64 bit for the ESSBASE server and 32/64 bit for the application server)
Thanks,
Sayantan

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

Any known issues with Flash player 9 and windows 2003 compatibility?

Hi guys..
Is there any known compatibility problem with running flash
applications
on Windows 2003 Server?
My application runs just so well with Windows XP
yet it throws a 2015 bitmap error
when it is being run on the windows 2003 server.
(Not quite often but often enough. the only difference is the
operating
system)
Is there any known issue about this?
Or could there be any compatibility problem with flash player
and
windows 2003?
Any hints would be deeply appreciated...
Thank you...

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

I have a mac book pro mid 2011 and it overheats is there any known issue with this model

overheating issues
I have a mac book pro mid 2011 and it overheats is there any known issue with this model

Are you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
Clinton

Adobe Audition CS6 and Alesis Multimix 8 Firewire choppy playback

I recorded a whole podcast using both Adobe Audition CS6 and Alesis Multimix 8 Firewire, and I originally played it back it was fine. Now after a week I play it back in Adobe Audition and the dialogue is choppy and repeating itself constantly every second. When I export it in a multitrack mixdown as a WAV file it still does the same choppy repeating thing. Has anyone else run into this problem who has a fix?
Thanks!

I don't use any Alesis products but have heard rumours in another forum that they're having some driver issues.
Maybe as an experiment you could export to a wave file and try playing that through your internal sound card rather than the Multimix. If playback is clean when not involving the Multimix that may suggest the problem lies in the Alesis gear. If the skipping is still there then something is likely going on within Audition.

Are there any known issues with focus stacking or auto align causing PS to stop responding?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Are there any known issues when using PSE 13 after installing Apple's recent 10.10.3 Combo update for Yosemite?

I've had Yosemite for some time and bought/installed PSE 13 afterwards.
In the last few days I upgraded to Yosemite 10.10.3.
As a PSE 13 novice I've been working my way through "Adobe Photoshop Elements 13 - Classroom in a Book". Working through the exercises I've found my iMac is sometimes taking longer to process the functions I'm using than prior ro the 10.10.3 upgrade. E.g., using the Healing Brush tools, Straighten Tool etc.
I've struggled with Apple's upgrade and had to re-install my machine from a previous Time Machine Backup and so I was wondering:-
Are there any known issues with PSE 13 post 10.10.3 upgrade?
Are there things I should be concerned about in the future before accepting an OS X upgrade?
Thanks,
Andy

No, no known issues. However it's a good idea to always delete preferences after OS X system updates.

Known Issues with Session Vars and non-IE browsers?

Are there any known issues with non-Internet Explorer
browsers storing or reading session variables. Or loops and
ListGetAt functions? I'm using CF 5.
The code works fine in IE, but not in FireFox or Netscape.
Thanks,
Josh

This testing will not really address any cross domain issues, due to the content being hosted by ScormCloud.
What I found interesting, is that in ScormCloud, using the links below, my results were opposite those that I obtained through my LMS.
In LMS, Captivate 5 worked, Captivate 6 did not in IE8, both worked in FF
In ScormCloud, Captivate 5 did not work in IE8, but worked in FF, and Captivate 6 did work in FF and IE8.
Here are the links:
captivate 5 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=3c04f298-d0db-4d10-ab6 3-80b9aaf2890b
captivate 6 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=e2b05753-2f03-421a-87d 9-62b92ad199af
Thanks for your attention, every bit of information that I can get will help.
Thanks,
SL

Any known issue about running Swing application in WTS?

*{color:#0000ff}Is there any known issue about running Swing Application in Windows Terminal Server?{color}*
It is started using JWS from internet (I mean, it checks if there is an avaiable update and updates or just fun).
_*{color:#800000}+The problem is that just one machine can open the application at the same time+*_
_*{color}*_
*{color:#666699}Is there any config in java or jws to run properly several instances of the application (terminal clients)?{color}*
Edited by: Franzisk on Sep 24, 2007 6:16 PM

876587 wrote:
... and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
Different environments mean just that. So something could be causing it outside java.
Additionally if anything at all is different in the execution data, such as even a name having a different size, then it would change the execution path.
Which would cause a problem in the JNI code to manifest itself on only one box. Probably isn't a pointer bug but all sorts of odd behavior can result from that.

Migrate SQL Server 7.0 to Oracle 8i - Any known issues??

Hi,
I am in the process of migrating SQL Server database to Oracle 8i for testing purpose. When I do migrate SQL Server database to Oracle 8i, am I doing any harm to the exiting SQL Server database? Would the users be able to use SQL Server database as usual?? Are there any known issues in this regard?
Please reply.
Thanks.
Ramesh

The Migration Workbench copys the information it requires from the source database and stores it in the Migration Workbench Repository, which is separate from the Source database. So, to answer your question, yes, the users can continue to use the SQL Server database. The data move may cause some system performance degradation. It may also be an idea to replicate the SQL Server database, in case any complication should arise.
Hope this helps
Dan

Is there any known issue about mutex lock used in JNI on Solaris 10?

Dear Oracle,
I'm facing a strange behavior when running a JNI application that use the mutex lock. The application hanged after running for a while on one of our Solaris 10 machines. After investigating the stack trace of the application, it shows that one of all the application's threads that access the JNI hold the mutex lock forever, and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
The mutex function I used as show below:
mutex_lock(&mutex)
The application hanged at this line:
0xff2cc940 ___lwp_mutex_timedlock + 0x8
The Kernel version is SunOS 5.10 Generic_142900-14
Since this issue occurrs on only one Solaris 10 machine in our environment, we are wondering if there is any known issue regarding the mutex lock used in JNI on Solaris 10. We tried to search the Internet and the Java Bug database but found nothing related to this issue.
Best regards,
Krit K.

876587 wrote:
... and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
Different environments mean just that. So something could be causing it outside java.
Additionally if anything at all is different in the execution data, such as even a name having a different size, then it would change the execution path.
Which would cause a problem in the JNI code to manifest itself on only one box. Probably isn't a pointer bug but all sorts of odd behavior can result from that.

Any Known Issues Btwn Au CS6, and Alesis I/O 26/Win7 64 Bit?

Similar Messages

Maybe you are looking for