Any known problems with FCE-HD and "Capture Now"  or edits

I've been working with FCE for almost two years now. I've had the same problem ever since-- The SPINNING PINWHEEL OF DEATH when: playing back edited video from the timeline and the playhead passes over various edit points, usually cuts. Is it a CAPTURE problem, or camcorder RECORD problem, or something else? I use a SONY DCR-TRV38 with firewire; FCE-HD;
Any thoughts on why I get this problem so often, and what I can do to avoid it in the future? should I just switch to Avid or Premier??
Thanks for any help...
Shawn

Hi Shawn.
I don't think there is a "known problem".
I assume your HDs are not more than 75% full or fragmented?
If you have not already done them, try the old chestnuts of Trashing the Preferences and Re-installing FCE.
1. Make sure you trash all 3 of the Preference Files as detailed in this article:-
http://docs.info.apple.com/article.html?artnum=93690
2. If that does not work then re-install FCE but make sure you delete all the old FCE files first as shown in this link:-
http://docs.info.apple.com/article.html?artnum=301182
Good luck.
Ian.
PS. When you write in with a problem, remember to give all possible APPROPRIATE details eg.
Computer model and external Hard Drive.
Operating System.
FCE version.
Camera type.
Did the problem suddenly occur or has it NEVER worked?
Have you recently loaded new Software or Upgraded ANY programs, Operating Systems etc.
Have you moved or altered your source files?
Have you captured the clips from a DV camera or an A/D Converter etc.?
Is it Standard or High Definition Video?
What type of files are you using?
Also include details of exactly what you were doing before the problem occurred.
Is your film hours long and filled with numerous transitions and effects etc.?
THIS IS A GENERAL LIST. SOME OF THEM WILL NOT APPLY TO YOU.

Similar Messages

  • Any known problems with Gnome 2.28 before I update?

    Hi, I would like know is there any known problems with Gnome 2.28?
    I read that there are a login/logout time increased, something else?
    Thanks in advance!

    when I upgraded to 2.28, icons in the menu appeared and I'm not able to disable them... other than that gnome 2.28 seems fine to me.

  • Any known problems with "Xtreme Game Fatal1ty Professional Series" and Nforc

    Hello,
    i plan to replace my audigy2 with a
    "Xtreme Game Fatalty Professional Series".
    There are known problems with the card itself and with the Nforce2 chipset?
    My board:
    MSI K7N2 Delta-L (nForce 2 Ultra400 chipset)
    thanks
    zivilistMessage Edited by zivilist on 0-3-20060:55 PM

    If you are up for the battle that MIGHT transpire with either one of these cards then your welcome to it. EAX will work on games that nati'vely support EAX and the openAL API. Games that are direct sound only will require the ALchemy program to make them work correctly. You can find a list of openAL nati've games on the openAL site...sorry don't have a link for you right now but google it. You might be able to find the list of Direct SOund games that ALchemy works on by going to the ALchemy site as well.
    For the most part, stuff is working but I would highly advise you do more research before purchasing any sound cards from Creative. Just check the forums and look under the Vista posts as well as here to get a taste of the issues many are having.

  • Are there any known problems with Macs and the mp3 playback in Adobe Connect ?

    One user using an Apple Mac has complained of not being able to hear the mp3 sound playback in a meeting.
    Is this a problem with Apple Mac and mp3 compatibility or is it an individual soundcard issue ?

    I use several Macs with Adobe Connect and I have even created MP3 files for playback in the room. Works fine on all my macs. It's basic Flash. Suggest they clear their browser cache, replace their host-add-in if using one. Run the audio wizard as well to make sure sound is working in Connect.
    All of the Adobe Connect Government engineers use Macs all the time so we've never had an issue with MP3's.

  • Connection problems with FCE HD and a Canon XL1

    I just can not get the system to see the camera so I can capture. I have an external Firewire drive as my scratch disc. Any advice? Thanks!

    Ian & Tom, First of all thanks for your ideas and quick replies, I really appreciate it.
    I'm using a (Belkin) FW hub but have re-routed things so the camera is going directly to one of the computer's two FW ports. Have tried all suggestions provided in your posts but the best I'm able to get is a message that reads, "Unable to initialize video deck. You may still use Capture Now." When I go to capture mode, however, no controls are usable and it says, "not communicating."
    Tom, I went to System Profiler and am not seeing the Canon. My computer has two FW ports and I'm only seeing the hub (and not the camera plugged into the other port). What's strange is that the hub is showing an "unknown device" but there's not an unaccounted for device plugged into the hub. I've tried the camera in both of the computer's FW ports to no avail. I'm guessing that's the weak link.
    Regarding full system info...
    - PowerMac G4, dual 1.27 GHz PowerPC
    - OS X 10.4.10
    - FCE HD 3.5.1
    - EZ Quest external FW drive
    - Canon XL1 (but my material was shot with a Panasonic DVX 100A, I'm just using the older Canon to capture for editing to save wear on the Panasonic's playback deck -- but the Panasonic connects just fine)
    Any other info needed? You guys totally rock for trying to help me with this -- good karma!

  • Any known problems with 2.6.32.5 kernel, xorg 1.7.3.902 and nvidia 190

    Hi everybody.
    Last update I did was when xorg 1.7.x (where x is between 1 and 3, dont remember), and it broke my xorg, I had some glitches with graphics, and x randomly crashed.
    Now xorg 1.7.3, kernel 2.6.32.5 and nvidia 190.53 is here for pretty long time and as arch suer I feel committed to update
    So i read the forum here a bit, and havent found any particular issues that broke the system, but I want to be safe.
    I got nvidia geforce 6600 agp if it does matter.
    So is there any particular issues that can arise after updating?
    Thanks a lot!

    Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
    I got nvidia geforce 7300.
    Any solution to this besides downgrading?

  • Are there any known problems with firefox4 and yahoo? Ive had problems with yahoo ever since I upgraded. If there are any problems, are there any solutions?

    When I check my yahoo mail, a lot of times emails will disappear, or I will click on one to read, and it will open one that is above it. Also there are times when I am on a page, and a yahoo search page will open saying page could not be found, and it wasnt even something I was doing.

    You have Adware installed. Click the Firefox button, go to Add-ons | Plugins and disable '''My Web Search'''. See http://en.wikipedia.org/wiki/My_web_search
    Also, update Firefox to the latest version which is 4.0.1 by clicking Help | About Firefox | Check For Updates button.
    In addition, update Adobe Flash via http://get.adobe.com/flashplayer/
    Here's the Adobe security advisory for Flash: http://www.adobe.com/support/security/bulletins/apsb11-12.html

  • Any known issues with Premiere CC and imported HDV clips?

    I'm having consistent difficulty with Premiere CC playback of HDV video that originated in FCP 7. This was not an issue in Premiere CS6. The problem is dropout and pixelization which is consistent, pass after pass, and occurs at the same TC location on some clips. It is almost like some clips are corrupted in a consistent manner, while others are not, and don't seem to become corrupted.
    For a variety of reasons, I still shoot HDV on a Z1U, and use an old FCP7 workstation to digitize media. I then import these individual video clip files into CS6. These are clips that play correctly in FCP, Premier CS6, and in the Finder, and Quicktime Pro, but not Premiere CC.
    I have Dropboxed a sample clip to my service contact at AJA, and she is reporting the same issue with Premiere CC. (The technical support at AJA is the best I've experienced in over 30 years of video production).
    The same issue presents itself with HDV clips that were converted to such from .m2v via Clipwrap.
    Any other types of media play correctly within Premiere CC. For example, I have a CS6 project that is nothing but After Effect CS6 anims comiled into a program in Premiere CS6; it plays perfectly. So do any media that Premiere CC puts through its own conversion or import "routine," like AVCHD. Even XDCAM clips that went into FCP via XDCAM Transfer play well.
    Any thoughts?

    Tim,
    I would assume the clips work fine in FCP7, so you're not totally busted. Maybe try using Compressor or AME, like the other guy said, to export them in another format; I'd recommend Apple ProRes 422. Fallback is to work in FCP7, as the tapes are gone.
    When I 1st posted this problem, I left for vacation. I saw briefly that someone suggested a plugin in another reply, but I haven't had a chance to pursue that yet. I'm in northern Michigan (USA) with limited access to email. I'll do some follow up this Monday when I return. Good luck!!
    Sent from my iPhone
    Phil Mariasy
    Allied Media Group
    [email protected]
    419-297-2730
    151 N. Michigan
    Ste. 300
    Toledo, OH 43604

  • Any known problems with Corsair XMS3 1333 3x2Gb in X58 Platinum SLI?

    I am noticing that the recommended memory PDF is very old, and most of those RAMs are not sold anymore. I had some XMS DDR400 and it was solid, easy to work with... So I'm planning on getting some XMS3 for my next build. Can anyone tell me if I'd have any problems? I've heard this board is picky.
    I wish MSI would update it's RAM compat list!

    Quote from: SolidGoldstein on 31-July-09, 15:33:27
    it says Intel XMP-*check* (whatever that means)
    Intel XMP --> http://www.intel.com/Consumer/Game/extreme-memory.htm
    Wiki --> http://en.wikipedia.org/wiki/Serial_Presence_Detect#Extreme_Memory_Profile_.28XMP.29

  • Any known problems with iPod Updater 2006-06-28?

    I was wondering if anyone's had any issues with their iPods since updating with the iPod Updater 2006-06-28.
    Thanks!

    I was a fool. I refrained from updating because I knew better than to try to fix something that isn't broken, but I was hungover and upset about the fact that whenever the headphones cord wiggles my ipod pauses. I was convinced for the split second in between two throbbing beats in my head that perhaps the new update would give me an option of shutting that aspect of the ipod off. Woe is me.
    Now 10 gb of my music is unavailable. The ipod just skips over it. It didn't delete the files, they're all still there, I just can't play them; not on the ipod nor on the computer (not original computer for ipod). In Itunes an exclamation point shows up in the first column whenever I try to play certain songs, but there is no information about what is wrong. If I go to info on these songs there is no entry for Profile: Channel: or Encoded With:, unlike the rest of my songs that still work.
    Any hope of recovery?

  • Any known problems with the 1.2.3 update??

    My iPod is behaving just fine thank you so I'm always a bit leery to install any updates since I really got burned the absolute FIRST time that I tried to install an update less than a week after acquiring my video iPod.
    I've been told by others here to be suspicious of any update that ends in an odd number. Any truth to this?
    Current iPod software version 1.2.2

    I've recently acquired an iPod 30gig w/video and updated it to the 1.2.3 firmware update. It plays but without sound. I've recently learned how to rollback the update, and all said and done, it's without success. I have browsed almost all major sections in this fine forum trying certain techiques, and even got a hold of support and yet without avail. Funny thing is is that I sent it off prior to this while it was on warranty, and they replaced it with this. I am new to iPod, and am wondering if it is something stupidly simple.
    Is there anything that I may have missed in the setup process?? Almost forgot, it worked once, but when I tried putting more on it , well... it didn't work. I am not new to MP3 players, though, but iPod seems to be a bit touchy. Anyways, I'd appreciate it if anybody here has some kind of suggestions. I thank you all in advance. God bless, Scott

  • Any known problems with downloading/updating latest Adobe Reader XI with latest Mavericks OS??

    Error messages telling me that Adobe Reader is running and there is no Adobe Reader on my computer.    HELP!!

    Probably the plugin of the web browser needs updating from http://www.adobe.com/

  • Problem with PC Suite and Windows 7 Home Edition 64-bit

    I installed PC Suite on my desktop with Windows 7 Home Edition 64-bit installed.  I was able to eventually run PC Suite (granted it needed to run in XP SP2 compatibility mode) and sync my calendar on my W518a cell phone with PC Suite via Bluetooth communications.  After I turned off my computer and restarted it, I could no longer open up PC Suite...its icon appears in my system tray with a red X over it as if it can't find the program.
    The SonyEricsson website indicates PC Suite can run with Windows 7.
    What is causing the problem I am having?  How do I get this corrected?

    I have downloaded and reinstalled the PC Suite software.  Although it is not working as well as it should, as long as I have my cell phone on with Bluetooth enabled prior to clicking on the icon to open the application, it seems to work OK.  Otherwise, when it opens, it just hangs and the only way you can close the program is to get into Task Manager and force it closed when its status is showing as "Not Responding".  I also have found that just "closing" the PC Suite window does not close the application...you have to click on the option to "Exit the Application" otherwise you continue to have it in your system tray with a red X over the icon.

  • Any known issues with Flash player 9 and windows 2003 compatibility?

    Hi guys..
    Is there any known compatibility problem with running flash
    applications
    on Windows 2003 Server?
    My application runs just so well with Windows XP
    yet it throws a 2015 bitmap error
    when it is being run on the windows 2003 server.
    (Not quite often but often enough. the only difference is the
    operating
    system)
    Is there any known issue about this?
    Or could there be any compatibility problem with flash player
    and
    windows 2003?
    Any hints would be deeply appreciated...
    Thank you...

    Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

  • Updating eMac from 10.4.0 to 10.4.10: any known problems

    We bought my wife a late-generation eMac from the Apple refurb site about 18 months ago. that came with Tiger 10.4.0. Because it's been so stable (we can't remember a single failure) and my wife is nearly always using her computer, I never applied the OS updates.
    Now she's traveling for two weeks and I'm retired, so I'm considering taking her Tiger installation to the top (we'll wait to see if Leopard in in the budget)
    I know with some older version of OSX, there was a order issue with SW Updates. Example: some Beige G3s had problems if the 10.2.8 Combo Update was run on a system with the base install (10.2.3). They needed "stepping in" (base > 10.2.4 > 10.2.6 Combo > 10.2.8 Combo) to work properly.
    I know to run Repair permissions before and after any SW update. Any known problems with taking a late eMac all the way with the 10.4.10 Combo updater? I'd hate from her to home home to a problematic computer!
    As the computer in my equipment line below is not hers, here are the particulars for her computer:
    eMac ATI graphics 1.42G—512MB RAM—80G HD—combo drive—10.4.zero
    Thanks in advance,
    Allan

    I recently updated my eMac from Panther (10.3.x) to Tiger and let it go ahead and update by downloading the 10.4.10 patch from Apple. It has been some weeks now and so far no issues to report. So it seems ok. And my eMac is a version before yours.
    Patrick

Maybe you are looking for

  • Deleteing exact duplicates more than one at a time?

    I am able to pull up exact duplicates but am I only supposed to delete the extras or all on the list? Is there a way to delete all at once or do I have to do it one by one?

  • Credit memo request with zero net value

    Hello all, when we create a credit memo request (VA01, doc type CR) and put a material quantity into the credit memo request that falls below the scale in VK13, the net value for the material will be zero. We do not want to allow to save the credit m

  • Help in abap program

    hellow i have a table itab with value (ex. error value) and i wont to select some value from tables ( defined below.) and put it in table err_itab my problem is in the loop i dont now how to continued from their i thihk with append to intrernal table

  • No sync \ Vista

    Hello, Vista and iPod shuffle second gen. Itunes will not sync. The iPod is found, iTunes reads sync in process, do not remove, but nothing syncs. Autofill works, I can copy playlists to the device, etc. Trying to sync only checked items. Both iPod a

  • Poor podcast audio on iPhone 3

    Podcasts that sound fine on the computer have a distinct echo when played on my wife's iPhone. The audio sounds as though it was recorded in an echo chamber. Songs, whether purchased via iTunes (on computer or iPhone) or ripped from a cd, sound fine.