Any Logic 8 / EWQLSO users out there?

Hello guys
I am using Logic 8.0.1 on a PPC G5 iMac and I'm getting some weird problems with the East West Quantum Leap Sound Orchestra, apart from the fact that I won't be able to use it when I get an intel mac! My soundcard is an RME Fireface 800.
It all runs smoothly as long as i only use it in certain configurations. You know when you boot the plugin, you get a choice of which configuration you want to use.
These work fine:
Mono
Stereo
16 x mono
5.1
These produce some bizarre digi feedvback / pink noise type sounds:
16 x stereo
1 x 5.1, 15 mono
and all the others in the list basically...
I'm not worried about 5.1 as I don't work with that format but I would like to use 16 x stereo Can anyone explain why this is happening, is it a bug or am I doing something wrong.
Any help much appreciated.
Thanks

I'm experiencing exactly the same problem with the Trilogy wrapper. Spectrasonics support recommends increasing buffer size. I tried (from 128->1056) to no avail. On playback with the wrapper instantiated on a track, my Apogee Ensemble overloads due to an extremely loud click - then, silence - no audio. Unchecking the wrapper in the Logic AU Manager solves the problem. It's obviously a "wrapper-induced" problem which Spectrasonics has difficulty dealing with
Spectrasonics has no apparent solution nor do I. At this point I'll punt on Trilogy. Their support team told me not to expect a new Trilogy until after their STEAM-based Omnisphere is released on September 15, 2008. The universal binary version of Trilogy will also be STEAM-based.

Similar Messages

Any 1st Gen iPod users out there? M8541

All this talk about shiny new iPods has got me all nostalgic over my lovely old 1st gen scroll wheel model (M8541). Alas the hard disk died on that a year ago and it's been gathering dust ever since.
I've been Googling trying to find others in the same predicament, and hopefully some details on how to obtain a new/refurbed hard disk and bring the old timer back to life. Alas, I've not got very far as yet, which either means my searching skills aren't up to much, or it's just way too difficult so no-one's succeeded.
What I'd really like is to find some kind of flash memory with the same ATA-5 interface used by the original disk, so I can have something a bit more durable in there. I'm sure this must be possible and am hoping there might be someone out there who's tried the same or knows enough to convince me I'm wasting my time.
I've found what looks like a viable replacement disk here :
http://www.evertek.com/viewpart.asp?auto=14710
Price is good too, though the part number is MK5002MAL-R where my original doesn't have the -R on the end, so not sure it's a drop-in replacement.
Help, anyone?
Firebook 1.67Ghz Mac OS X (10.4.7) 1st gen iPod and Nano

I have this model too. Is yours a 5 or 10 GB? Also, I you using it on Win or Mac? Mine is Mac but want to use it on Win.....is it possible to reformat it to work? I;ll see if my search skills can help ya find a new HD for yours.
Thanks
Windows XP

I would be ever so grateful to any Indesign Cs5.5 users out there...

I need to convert a CS5.5 file of approx. 6 mbs to an XML mark up language file ASAP. I didn't realize they were incompatible an. d due to some software snafu's created it in 5.5. I now need the file in CS5 and have uninstalled Cs5.5 and am not interested in downloading it again.
If you can help me, please email [email protected] and I will send you the file.
Thank you.

Assuming you mean IDML ("XML mark up" can mean many things), happy to do it.
Replied via e-mail as well.

HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

OT - Ratio of Thunderbird users out there?

What do you suspect is the ratio of Thunderbird (email
client) users out
there? If I need to narrow it down, I'll say North America.
Rough guesstimate is fine..

On 01 Dec 2006 in macromedia.dreamweaver, R. Jay wrote:
> What do you suspect is the ratio of Thunderbird (email
client) users
> out there? If I need to narrow it down, I'll say North
America.
>
> Rough guesstimate is fine..
7%. I have 161 messages in my inbox dating back to 2 Oct
2006. Of the
161, 11 show "User-Agent: Thunderbird ..." in the headers.
(10 of
those were 1.5.0.7.) Of the remaining 150, 106 have an
X-Mailer
header, which breaks out like this:
7.0 for Windows sub 123 1
8.0 for Windows sub 6036 2
9.0 for Windows sub 5039 3
9.0 for Windows sub 5060 1
9.0 for Windows sub 5125 1
AOL WebMail 20836 2
AOL WebMail 22250 3
BigSender
http://CraigRichards.com/software
1
Juno 5.0.49 1
Listrak 1
Lotus Notes Release 6.5.5 November 30, 2005 2
MIME::Lite 2.117 (F2.6) 7
Microsoft CDO for Windows 2000 1
Microsoft Office Outlook 11 4
Microsoft Outlook Express 6.00.2800.1106 3
Microsoft Outlook Express 6.00.2900.2180 1
Microsoft Outlook Express 6.00.2900.2869 25
Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) 2
Microsoft Outlook, Build 10.0.3416 6
Novell GroupWise 5.5.5 3
Pegasus Mail for Windows (4.21c) 2
QUALCOMM Windows Eudora Version 7.0.1.0 21
Unknown (No Version) 1
Webmail Version 4.0 12
A lot of the rest are Hotmail. As always, YMMV.
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

Is any Logic 8 (Studio) user able to open STP with audio units plug-ins?

All of my 3rd party audio units plug-ins work with Logic 8: UAD, Powercore, PSP, NomadFactory, and RND.
MainStage and WaveBurner open without any problems.
Soundtrack Pro will only open if all of my AU plug-ins are removed to a "Components (Disabled)" folder.
I tried adding a few AU back into the components folder. Some seem ok, but if STP crashes after more AU's are added, then those that previously passed inspection seem to then cause STP to crash on start up.
I've tried trashing the com.apple.soundtrackpro.plist, EffectsCache.plist with temporary benefit.
I would like to use STP for mastering Logic audio mixes before burning in WaveBurner. Isn't this one of the benefits of purchasing Logic Studio???
What to do???

A little patience pays off...
The problem is...the +_*&^%$#@!!! TC PowerCore plugins!!!
And I'm somebody who actually likes them.
After receiving a suggestion that the TC Assimilator in particular might be problematic, I decided to gradually add everything but TC plugs. STP is now well behaved. I tested the waters by adding TC ClassicVerb and MegaVerb. So far...OK. The TC ClassicVerb is one of the best out there besides the $699 TC VSS3.
I can live without the other TC stuff for right now.
Again, I really appreciated the support.
Best

Not sure if this is the right place...but is there any aggregate data repository/dictionary out there?

And what I mean is...Is there any aggregate data dictionary out there that tells you how long and what type a data column should be?
For example...Medical Provider Name...what is the normal length for something like this? Provider ID? Tax ID? Address Line 1? City? State?...Etc...
Is like EDI X12 considered the Bible of Data Dictionaries? Yet you have to pay for that don't you? Is there anything else I can reference???
Thanks for your review and am hopeful for a reply.
PSULionRP

Provider ID is well defined:
"National Provider Identifier Standard (NPI)
The National Provider Identifier (NPI) is a Health Insurance Portability and Accountability Act (HIPAA) Administrative Simplification Standard. The NPI is a unique identification number for covered health care providers. Covered health care providers and
all health plans and health care clearinghouses must use the NPIs in the administrative and financial transactions adopted under HIPAA. The NPI is a 10-position, intelligence-free numeric identifier (10-digit number). This means that the numbers do not carry
other information about healthcare providers, such as the state in which they live or their medical specialty. The NPI must be used in lieu of legacy provider identifiers in the HIPAA standards transactions."
LINK:
http://www.cms.gov/Regulations-and-Guidance/HIPAA-Administrative-Simplification/NationalProvIdentStand/index.html?redirect=/NationalProvIdentStand/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Any custom quotation screen savers out there?

I'd like to be able to have a random quotation as my screen saver. I've found quote screensavers out there, but none of them let you use your own collection of quotes. Does anyone know of a screen saver I can use to do this?

Hi Jeremy,
Here's a quick search at MacUpdate. I do believe as though I've run across a few others as well. If I can remember where they were I'll post links to those also.
Hope this helps...

Is there a Netscape user out there?

Ever since I hooked up my new iMac in May, I have had problems with Netscape 7.2 quitting on me. Should I call Apple or does anyone out there know something I don't?
Thanks,
Lindy

Hi Lindy: I don't use Netscape, but from the little research I've done, I believe that Netscape 7.2 isn't a "Universal application". This could cause some grief and aggravation. I believe it was released in 2004/5, quite old in the browser world. There is a version 9 available now, as well as numerous other browsers for Mac.
Happy Surfing
Stedman

Are there any Blender 3D users out there.... Node editor glitch

I work on a MacBook Pro (Santa Rosa 2.2) with OS X 10.4.11 and have noticed that the "previews" in the node editor have weird lines and visual glitches. See http://entplex.org/node_preview.png and http://entplex.org/node_preview2.png. Note the static in the viewer and comp nodes. This occurs with both 2.44 and 2.45. This occurs with ANY node setup I try and even after reseting user defaults in blender. I have even gone as far as trying to run blender from a clean install of os x on an external hard drive. Has anyone else noticed this or is there something wrong with my system? Can anyone confirm or deny this?

*looks like a graphics card issue.*
*try looking here: http://www.blendernation.com/2008/02/22/blender-problems-on-leopard-solved/*
*Also, that stretching comes from your (output) format ... usually.*
*I'd try moving your output to ntsc (720x486) and deselecting fields (if those are selected)*

Any former Avid users out there....

I am helping a another company gather footage from our library. However, they use Avid (PC version) and we run all Final Cut. Two days ago I gave them a hard drive with all the digitized footage as Quicktime movies using either an HDV codec (HDV 720p30 shot from a JVC GY-HD100) or DV/DVCPRO NTSC codec.
The producer and editor have both told me that they cannot open some of the files and are having problems bringing other files into Avid. So what is the native file format/codec for Avid? Should I give them avi files?
While I have not worked with Avid directly I assumed it was similar to FCP (or maybe FCP is similar to Avid depending on which side of the fence you're on). I figured you could ingest just about anything and while you may have to render it, it should fit on the same timeline.
As a small insight, I talked to the producer yesterday who said that some of the footage was in an odd size. He said it was bigger than the usual 720 by something (these are the producers words paraphrased). I told him it was high definition. He said well let me pass you over to the editor whose cutting the project. The editor gets on the phone and asks, "As part of your normal workflow do you guys normally mix SD and HD in the same project?" Apparently he'd never heard of doing such a thing.
I wasn't sure if this guy had just crawled out from under a rock and realized that much of the Western world was now getting more involved with HD...maybe he just watched the Super Bowl in High Definition. I don't know, but I told him that we do it all the time - upres SD to HD or downconverting HD to SD is a pretty common part of our workflow.
So I am trying to figure out how can I give the footage to them so they can easily ingest it (avi, OMF, Quicktime with a certain codec, etc). I am not getting paid to do their laundry so I am trying to make it as simple as possible to get this footage to them. Any ideas?

You might have an incompatibly formatted drive. Some of your files are accessible in that file structure, others are not. Seen it happen. No clue.
Or, of course, you could send them a tape or two, then let them recapture.
<
This is the best possible solution unless you are prepared to work on the least common denominator which is likely to be an extreme choice: the lossless and hugely prolific Animation codec. (There must be other inter-platform codecs, I've never used Avid, so I dunno)
You can get additional help by posting a similar question on an Avid forum. Try creativecow.net and try not to take the elitists personally over there. They think anything that isn't purple is a threat unto their livelihoods and are likely to be rather, umm, snippy. Not like us at all.
Suggest you couch it like this: "I had to give up my favorite and ultracool Avid to go to work at a shop that is all, get this, Final Cut. I used to be able to exchange my QT files with my old Avid Macintosh chums easily but some of my old Avid chums have been forced to switch from their Macs to PC versions (can you IMAGINE?) and they need media from me. I use these formats on FCP (list here). What's the no-brainer pathway for us to exchange media freely and openly since we're all brothers and sisters working together on the same creative team and want to be able to work together without any finger-pointing since none of our editing platform decisions were our own."
bogiesan

Any RH 9 HTML Link to Word users out there?

Sorry to throw another one other here, but I'm currently testing a trial version of RH9 and I'm struggling with the new linking enhancements.
Here's the "what's new in RH9" lingo:
While importing or linking a document, you can modify the character and paragraph styles defined in the document. In the case of linked documents, style properties modified from within Microsoft Word or FrameMaker and modified from within RoboHelp can now co-exist. In other words, you can modify the style properties that you want to override in RoboHelp and allow other style properties to be modified in Microsoft Word or FrameMaker.
RoboHelp 9 maintains two styles sheets to manage the styles of a linked document. A [topic].css file stores the styles defined in the source document. The global CSS file, by default named RHStyleMapping.css, stores the details of modifications and mapped RoboHelp styles.
RoboHelp stores each modified style with the style name WD_[original_style_name] (in the case of Microsoft Word) or FM_[original_style_name] (in the case of FrameMaker) in RHStyleMapping.css.
Note: RoboHelp hides the [topic].css files from the workspace to ensure that source styles are preserved in this file.
Can anyone provide a few steps so I could test this out? Or else explain the benefit of this if all of my styles and formatting will be done in Word?
I appreciate it!

Hello,
This is a tricky situation, I would say, Peter has referred to a very good post explaining the process, nicely.
If you would like to include your topics from RHx5 HTML to RH9 HTML, I would advise you to got to your RH9 HTML project--
Select File> Import> HTML/XHTML File and Select All the ".HTM" topic files from you source RoboHelp Project. You would regain all the Topics in your Project Files list
Similarly you can either import the TOC, Index, Glossary files, individually or use RoboHelp's Auto-Generate wizard to recreate them afresh.
This is a workaround, and there is a possibility that some of your objects might not migrate as expected, as there has been a lot of change in the architecture/design of project elements from version 5 to 9.Hence, a sequential Upgarde in project is always recommended.
Thanks,
Anjaneai Srivastava

Any UK/European users out there?

Does anyone have any insight into the practicalities of iPad use between countries? In my case, I live in UK (and can buy an iPad here) ... but I also spend time in Italy, where I would like to use it to access the Internet and e-mail. How do I do that?
I'm trying to avoid paying the roaming charges, by having two accounts and two sim cards , so that , if possible I am charged the respective rates for whichever country I am in. Anyone know if this is feasible?

Brought my IPad 3G which was purchased in the USA to the UK and went to the Apple Store in Cambridge for help on changing from AT&T to a UK sim card provider. Their genius offered no help. Went to the O2 store and they had a mini sim card and account for the IPad however when the sim card was inserted it would not bring up the account set up portal View Account so there was no way to set up the account on my IPad. Fortunately the manager of the store had a IPad 3G which he purchased in the UK and he was able to set up my O2 sim card account on his IPad and then move it to my IPad. This round about worked and I was able to use 3G which is very spotty in the UK during my visit. However, there was NO View Account setting to cancel the the account and I had to go back to the store and have the same manager put the sim card into his IPad to cancel the account prior to leaving. This experience would negate that you can easily travel and use mini sim cards from other countries in your IPad. Is this a glitch with Apple software that does not allow you to open multiple sim card accounts? Regardless, it needs to be addressed and corrected by Apple as many people like myself purchased the 3G model believing the marketing that they could easily use it with multiple sim card accounts while traveling abroad. I appreciate any comments...especially from Apple.

Any westcoast Canada users out there?

I have a hard time setting up pop mail in mail 3.3, not matter what I do, I can only send but cannot receive email. I have talked to both my work and home isp, no luck with that. Is there anybody using Shaw or Telus can answer my question? Thanks Alex

Like I said, I'm using IMAP, so my settings won't help you if you are wanting to configure POP. They will only help you if you switch to IMAP.
It only takes a minute or two to visit Telus' customer website and switch to IMAP. Do you still want me to share my IMAP settings with you?

Any IMAC Reason user out there (music heads)

I just purchased 20inch Imac 3weeks + bought Reasons 3.0..... It ask me to install the 3.0.5 for intel MACS.
which I did ......
Problem installing Reason ... The error message "can not locate Reason Audio engine".
My exec partner has a 17inch IMAC..its about 6mos old.. It installed smoothly
I'm not sure if maybe Intel/MAC has a conversion duo update that allow programs to install
or Do i need to disable something ? or a folder..
Please help
Thanks
I mac 20 inch Mac OS X (10.4.9) Reasons / Protools (MBOX2)

Propellehead has an article on that problem here, but not having an account with them (and not wishing to set one up), I can't read it and so be sure it will address your issue. Worth checking out, though.

Any Logic 8 / EWQLSO users out there?

Similar Messages

Maybe you are looking for