Any mid size companies for SAP HR to help to get a job as a fresher

hi all,
any mid size companies to get a job in sap hr

check the dates of ur holiday calendar ESG DWS and PWS
here 2 is ur ESG
40 is ur DWS Sub Grouping
WSR is ur WS Rule
u will ge this error while generating the DWS manually

Similar Messages

I need mid size companies... to get the job as SAP HR fresher...

hi to all,
i need some companies which can encourge the SAP HR freshers..
which r mid size companies..............
weathe it may be a contract position also...
bye
ravi

Hi Vidan
First of all try to learn the business process and try to understand the business scenarios.Forget about entering into any Organization and try to explore the max and update your self. Then only think of any Organization.Cause though you are a fresher in any Organization, you have to work from day one and hardly you will get help from others.My suggestion is get addicted to SAP and then on a parallel ground start search.
Comming to freshers, there are many Organizations who are looking for freshers. Once you are confident enough then we have our Guru's available in this forum who are always ready to help .
Dont think of a small size or a big size of the Organization , Just explore and if get a chance get into it.
All the best..
Regards,
Sri..

If any professional degree need for SAP HANA 1.0 Certification learning?

Dear All
I am Janakiraman and interest in SAP Hana learning and Certification...i am not Professional graduate...i have technical diplomo only..any professional degree must for SAP HANA 1.0 Certification learning?

Hi
Yes, if you are planning to install new system(BW 7.3). No need for migration or use oracle DB.
BW 7.3 on HANA, where HANA will work as DB for your BW 7.3.
Hope you already have advantages of using BW on HANA.
Regards,
Venkatesh

How to get a job being a fresher in SAP HCM

Hi.
Can anyone guide me.How can I get the job into SAP HCM Profile.
I am an MBA in Human resource. Along with 8 years of experience into the same HR functions. I have completed SAP HCM training from a local institute in the month of Jan this year. They were suggesting me to go for a fake experience letter to get the job into SAP. Which I refused to take.Coz I dint find ethically right to go for such thing. I have also uploaded my profile into job portals,where every job demands at least one end to end implementation should have done.
I am getting very impatient as am not getting any relevant job calls as per my profile . Can any one guide me How will I get the job in SAP HCM Profile.
Thanks
Deeksha

Deeksha,
While more difficult, I applaud you and your integrity to be ethical in the process of looking for that first job. You are rare, and that should be commended.
This may not be what you are looking for, but do you have any opportunities to take an internship (sometimes at no pay, sometimes at lower pay, and often only for a season)? This will allow you to get some experience and also get your foot in the door with a company. From there, you will have an easier time selling yourself.
You have 8 years of experience in HR. Were you using SAP systems during that time? Would you be able to start off as a functional analyst or possibly a business analyst while looking for opportunities to take on tasks in the system to get professional experience with SAP HCM, as part of your transition?
These are just some thoughts that might help you.
I wish you well in your endeavors! Stay strong and keep your integrity!!
Jeff

Is any Programming knowledge require for SAP MDM people ??

Hi,
My name is Balu completed Mechanical Engineering. Am Interesting to learn SAP MDM. Is there any Programming Knowledge require for to learn SAP MDM. Please reply my Question.
Thanks In Advance,
Best Regards,
Balu

My name is Balu completed Mechanical Engineering. Am Interesting to learn SAP MDM. Is there any Programming Knowledge require for to learn SAP MDM. Please reply my Question.
Thanks In Advance,
Best Regards,
Balu
Hi Balu,
It all depends on the kind of role you aim at or how you want to sell yourself.
I dont think programming knowledge is required for core SAP MDM related work but it all depends on the role in hand,project requirement,landscape,customization etc.
I will like to add that SAP NetWeaver Master Data Management (SAP NetWeaver MDM) can provide a single version of master data for supplier, product, customer, or user-defined data objects in heterogeneous environments.
It is not only a tool but a part of strategy.It has to interact various SAP as well as legacy systems for data related operations.
SAP provides its users with set of APIs which one can use to achieve customization as per their requirement.
There are ABAP,JAVA and .NET APIs provided by SAP for this purpose.
In all,having a coding experience in any of the above languages would certainly be a plus.
Hope it help!
Thanks,
Ravi

Hi All,Can any provide an example for SAP MEMORY AND ABAP memory

Hi All,
Can any provide me an example for SAP MEMORY AND ABAP memory.
thanks&regards.
Bharat.

HI Bharat
A simple example of ABAP memory is using the EXPORT/IMPORT statements.
Here in this program, I get the data, export it to memory,
clear out the internal table in my progam, then reimport the data into it and write out the data.
You probably wounldn't do this in a normal program,
but this is how you can pass data from program a to program b when A Submits program B.
report zxy_0002 .
data: it001 type table of t001 with header line.
select * into table it001 from t001.
export it001 = it001 to memory id 'ZXY_TEST'.
clear it001. refresh it001.
import it001 = it001 from memory id 'ZXY_TEST'.
loop at it001.
write:/ it001-bukrs, it001-butxt.
endloop.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access.
You can use SAP memory either to pass data from one program to another within a session,
or to pass data from one session to another.
Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters).
These parameters can be set either for a particular user
or for a particular program using the SET PARAMETER statement.
Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement.
The most frequent use of SPA/GPA parameters is to fill input fields on screens
ABAP/4 Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access
using the EXPORT and IMPORT statements.
Data within this area remains intact during a whole sequence of program calls. To pass data
to a program which you are calling,
the data needs to be placed in ABAP memory before the call is made.
The internal session of the called program then replaces that of the calling program.
The program called can then read from the ABAP memory.
If control is then returned to the program which made the initial call, the same process operates in reverse.
SAP memory
The SAP memory, otherwise known as the global memory,
is available to a user during the entire duration of a terminal session.
Its contents are retained across transaction boundaries as well as external and internal sessions.
The SET PARAMETER and GET PARAMETER statements allow you to write to, or read from, the SAP memory.
ABAP/4 memory
The contents of the ABAP/4 memory are retained only during the lifetime of an external session
(see also Organization of Modularization Units).
You can retain or pass data across internal sessions.
The EXPORT TO MEMORY and IMPORT FROM MEMORY statements allow you to write data to, or read data from, the ABAP memory.
ABAP Memmory & SAP Memmory
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Set
http://www.geocities.com/SiliconValley/Campus/6345/set_para.htm
GET
http://www.geocities.com/SiliconValley/Campus/6345/get_para.htm
EXPORT
http://www.geocities.com/SiliconValley/Campus/6345/export01.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3bc4358411d1829f0000e829fbfe/frameset.htm
Other Imp Help
http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
Regards Rk

BO Edge SAP integration for mid size companies

Hi
Refer http://www.intelligententerprise.com/showArticle.jhtml?articleID=216403200.
It says here Edge integrates with SAP. Does anyone know if you still required BI NW for this? I've only found that you still need SAP BI NW for this, otherwise you'll only be able to use Crystal reports directly off SAP ERP. Is my logic right, or has SAP come up with Edge integration directly to ERP with Edge serving as it's own data warehouse.

Hi,
not sure where you received the information that Web Intelligence will talk to the ERP system by Enhancement Package 04 but I think you are mixing up things here. Part of Enhancement Package 05 for the BusinessSuite (Q4 2009) is an option to expose ERP data to the BI system without any data modelling which then can be used via a BW query.
Ingo

Midi adaptor cables for 1212 . Where could i get them?

Ive moved house and left these behind me. Wont be able to get them for a while. Is there anywhere I can buy them? Live around london so gonna try a few audio stores but dont fancy my chances. ITs the 5 pin mini to standard midi. ITs a bit annoying.

Hi,
You might want to contact Customer Support to see if they can help you with this.

28 failed attempts for restricted password need help to get in my settings

Forgot my password in settings restricted failed 28 times how do I fix it

If the restrictions passcode has been forgotten, restore the device as new. There is no way to reset or recover the passcode.

Looking for SAP HCM jobs

Hi All
This is anand from chennai. I wanna start my carreer into SAP HCM. I have 2 years of experience in recruitment field and my graduation is engineering with MBA.
If you know any opening across southern region you can refer me.
Thanks in advance
Anand M

Hi Jisul,
as you are in NCR, and have worked already 6 yrs. , so just ask to your concerns about the company name where SAP HCM has been implemented, please understand one thing that getting a job as an fresher is to tough, so you have to struggle hard in achieving it.
Please update your resume in all leading job portal on regular basis, and send your resume to all local consultancies firm too, because many mid size company hires only through local consultancies.

Oracle AS Adapter for SAP R/3

Hello everyone.
I have some questions abuot the Oracle AS Adabter for SAP.
I have to get values out of miniSAP and integrate them in a BPEL Process. In SAP there is a function to generate a Webservice out of a BAPI for example! This Web Service I want to include in a bpel process. This is the way I try it till now!!!!
Now I read an article about the Adapter.
Is the task i explained abouve possible to do it with the adapter?
If yes, Can I include every BAPI in a bpel process with the adapter?
What are the prerequisites I need for the adapter? I have installed an Infrastructure, a Middle Tier (Portal) and the BPEL process manager.
Thanks a lot

Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

Crystal Report doesn't prompt for SAP credentials / errors out on refresh

2 Environments tested with same results:

BOE XI 3.1 SP2 & BOE XI 3.1 SP2 FP2.5 
SAP Intg Kit on mirrored SP/FP levels in each environment.

We've been successfully creating Crystal Reports against BEx queries in BW for months now as well as ECC master data. We've also built universes and have WebI reports actively working against similar BEx queries in the same. However, we're getting some curious behavior when we refresh the Crystal Reports against BEx queries in BW. Verified all necessary transports and authorizations have been provided for both authoring, as well as refreshing/viewing on demand, etc.

We've setup all the Crystal Reports we're testing to:

a) Use custom database logon information specified here. 
b) Specify a custom driver, leveraging the crdb_bwmdx driver 
c) Prompt the user for database login

We have not enabled SNC as of yet.

1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.

2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected

However:

3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:

Interactive Viewer: "Error in File %reportname%: Encapsulating Page Failed" 
Java Viewer: "Error in File %reportname%: Database Connection Error"

Nothing glaring in the event logs on the BO servers or in the Crystal logs that I can see, however just because it isn't spitting a specific error in the crystal logs doesn't mean I'm not missing something because I don't know what to look for behavior wise. To reduce the liklihood that it has to do with the way the report was built, we've tried against the same query by building a report using standard methods, as well as the SAP Toolbar using a very plain jane report. Same behavior.

Thoughts?
Edited by: Jay Riddle on Mar 1, 2010 8:55 PM

Hi,
1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.
>> Which authentication are you using to logon to InfoView ? Whats the configuration in the Universe Connection for Authentication ?
2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected
>> The user is using which authentication ? and against which system does he log on ?
However:
3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:
>> The user is using which authentication ? and against which system does he log on ?
>> You mentioned security restrictions and I assume we talk about BI authorizations in form of data level security. If so - does the BW query include the authorization variables ?
Ingo

Post Installation for SAP PI 7.0

I have done installation and post installation for SAP XI 3.0. Now I am trying to do the same with SAP PI 7.0. I am done with the installation. Presently working on Postinstallation. I believe this is not similar to SAP XI 3.0 ? Please let me know what are the difference in the Postinstallation between these two and also any links or documents for SAP PI 7.0 will be appreciated. Thank you.

Hello Akella,
You can view the Post Installation steps involved in PI 7.0 in the template installer under
http://servername:50xx0/nwa
Also refer this
PI(XI 7.0) configuration guides
Regarding SAP PI 7.0 Configuration
Just Installed PI
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
regards,
Anandh

License Key Request from SOLMAN VS SMP for SAP ECC 6.0 EPH4 IDES install

Hi, SDN fellows.
I have some doubt on the right way/options to request License Key for SAP ECC 6.0 EPH4 IDES.
Previously, I read that the only way to get license key is to generate it through SAP Solution Manager. If this is the only way, we will have to install Solution Manager just to generate the license key (we are currently don't have SolMan running in our landscape).
I also read that I can request license key through http://service.sap.com/licensekey. I checked the link and see that we have the 10 digits installation number for Product: SAP ERP.. Currently there is no system defined for this installation number.
I went through the first two screens, seems like they have options for SAP ERP 6 --> IDES.
If I can get a license key from http://service.sap.com/licensekey, do I still need to install Sol. Man. to generate the license key?
What are the difference the license key generated from Sol. Man. VS the one we request from SMP?
Thanks,
KC

Hi, Vishnu.
So, now I understand I need two keys: Solution Key and also License key.
I should obtain Solman key before I start installation , as the SAPinst will ask to enter Solman key before it can proceed to install SAP ECC IDES.
You said I can obtain Solman key through OSS note. I went in to SMP just now. Navigated to Help& Support --> Report a Product Error --> New Problem Solving Request.
I selected Customer Number, Product, Instillation # , and enter * for System ID. The search result returned no system found. The problem here is we don't really have any system ID defined for SAP ERP IDES since we haven't start installing the system.
Is that true that I will only see the System ID in OSS Message interface when I submit the System ID for the license key?
I thought this is a post-installation step to apply for a license key. If I can to do it before the installation, how can I get the 11 character hardware key before installation (assuming I cannot run the SLICENSE TCode and saplikey u2013get command)?
OR how can I create OSS message to request SolMan key when I don't have a system ID (that already registered for license key) in SMP?
OR I should just go ahead to install Solution Manager to generate Solman key (during pre-installation), and request for license key in SMP in post-installation?
Thanks for advise,
KC

Third Party tool for sap neteraver Java/EP administration

Hi Experts,
Do we have any third Party tool for SAP Neteweave -java or Portal administration like Wily?
I am looking any tool that can generate graphical reports for System health cheack and all like Wily Interscope.
Thanks
Narpal

Hi,
I hope links like this are allowed with the new SDN rules. We use something called [Click Stream|http://www.sweetlets.com/click_stream.html].
Quite nifty little tool and not even expensive.
Regards,
Andi

Any mid size companies for SAP HR to help to get a job as a fresher

Similar Messages

Maybe you are looking for