Any migration tool for postgres to oracle? thanks!

i think sqldeveloper hasn't cover it yet.

Hi,
  You are correct - SQL*Developer does not support migrating Postgres.
If you have access to My Oracle Support have a look at the following note for suggestions -
How To Migrate Non-Oracle Databases For Which a SQL*Developer or Migration Workbench Option Is Not Available (Doc ID 393760.1)
A brief summary is -
- use the DG4ODBC gateway to connect to Postgres and copy tables to Oracle
- load the Postgres data into flat files and put into Oracle using SQL*Loader
- try third-party providers as listed here -
http://www.oracle.com/technetwork/database/migration/third-party-093040.html
- check if there are any third-party tools
- In the 12c documentation there is a migration guide:
Oracle® Database Migration Guide 12c Release 1 (12.1)
http://st-doc.us.oracle.com/12/121/gateways.121/e22508/migr_tools_feat.htm#sthref8
It lists steps as possible solutions how to migrate from a foreign database to Oracle in the section: Other Oracle Products that Enable Migration
Regards,
Mike

Similar Messages

  • Any tool for Postgres to Oracle migration?

    I think sqldeveloper hasn't cover it yet.

    Hi - you posted this twice so see my update in the thread.
    Regards,
    Mike

  • Is there any upragde tools for SAP B1 to SAP ERP?

    Hi,
    I know, SAP B1 and SAP ERP are totally different SAP products.
    In my mind, maybe we should implement the new SAP ERP, and then, migrate the old master data from B1 to ERP...
    So, is there any upragde tools or procedure (or data migration tools)for the project of upgrade SAP B1 to SAP ERP?
    Is there any documentation for this?
    Many thanks in advance.
    BR,
    Randy

    It is not listed on the official roadmaps
    Lumira:
    https://websmp206.sap-ag.de/~sapidb/011000358700000212382013E.pdf
    Analysis Office:
    https://websmp206.sap-ag.de/~sapidb/011000358700000395262012D.pdf
    For Lumira we asked at BI 2014 the other week and they said they were working on it.
    You can register for this ASUG Analysis Office Roadmap and ask SAP on the webcast about it:
    May 12: Analysis Office Roadmap
    Same for Lumira - see these upcoming ASUG webcasts - especially Q&A:
    May 15: Lumira Self Service for Business User
    May 21: SAP Lumira Question and Answer Session

  • Migration tool for migrate MII objects from 11.5 to 12.1

    Hi All,
    We can use any of the tools SP01/02/03/04 for migrate MII objects from 11.5 to 12.0.
    Our requirement is to migrate MII objects from 11.5 to 12.1.
    Can we use the same tool to accomplish our requiremnt ? Or is there any other tool for this?
    Please suggest me on this.Thanks in advance.
    Regards,
    Manisha

    Thanks Jamie.I got it.upgrade guides located at http://service.sap.com/instguides -> SAP Business Suite Applications -> SAP Manufacturing -> SAP MII.
    Thanks,
    Manisha

  • Issue with SQL converter: Query Migration Tool for Microsoft SQL Server to SAP HANA

    Hello,
    I found the following blog : http://scn.sap.com/community/business-one/blog/2013/04/10/how-to-convert-sql-from-ms-sql-server-to-sap-hana
    I am trying out this migration tool for converting my MS SQL queries to HANA.
    I am running into issue while converting certain queries.
    The issue is specific to "set" commands which set local variables inside "create procedure" commands.
    e.g.
    a standalone set command:
    SET @var = (SELECT TOP 1 name FROM mytable ORDER BY name)
    is converted well:
    SELECT (SELECT TOP 1 "name" FROM "mytable" ORDER BY "name") INTO var FROM DUMMY;
    But when the same is part of create procedure:
    CREATE PROCEDURE [dbx].[XXXXX_YYYY_ZZZZ]
    AS
    SET @var = (SELECT TOP 1 name FROM mytable ORDER BY name)
    it fails in converting the same:
    --Statements in the input file contain errors; conversion was canceled
    I would like to understand who can help me here.
    Thanks...

    Hi Mayur,
    that tool cannot convert stored procedures. it is still being developed. For these you have to do it manually.

  • Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

    Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
    I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
    Reference: http://www.securityresearch.at/en/development/fortify/
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Hi Amalaraja Fernando,
    I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
    SharePoint diagnostic manager
    SharePoint enterprise manager
    What is SPCop SharePoint Code Analysis?
    Dmitry
    Lightning Tools Check
    out our SharePoint tools and web parts |
    Lightning Tools Blog | Мой Блог

  • When will OS X Lion be compatible with Avid's Pro Tools 9, or any Pro Tools for that matter?

    When will OS X Lion be compatible with Avid's Pro Tools 9, or any Pro Tools for that matter?

    There's less money to be made from compatibility than there is from "forced upgrades."  Why would AVID be concerned with their older product working with the new OS when they can release another version for people to pay $250+ for?  Free bug-fix download vs. latest software upgrade?  You've got two companies with virtual monopolies on the pro audio market.  It's a win-win for them.
    So what does that say to me about the handful that do not?  The incompatibility is a marketing decision, not a shortcoming.
    Am I close?

  • Is there any monitoring tool for web server and application server ?

    experts,
    I just want to know that is there any monitoring utility which being used to monitor the web server activities like threads web console session tracking and so on..
    I am using Jboss as my application server.If you suggest any monitoring tool for Jboss It would be helpful for me,

    You may use jConsole

  • Is there a Migration tool for migrating Oracle forms 5 to Java

    Hi,
    I would like to know if there are any oracle tools available for migrating Oracle forms to j2ee.I read that " Oracle JHeadstart 10g" migrates the forms 6i to java/html.Does Oracle JHeadstart 10g also migrate forms 5 to j2ee.I am new to both oracle forms and j2ee and any information about this would be a great help.
    Thanks,
    Kevin

    Kevin,
    there are a couple of migration partners that offer their migration tool and many are listed on the otn page for Forms (otn.oracle.com/products/forms). You may want to make yourself a picture of how efficient such a migration coul dbecome
    Frank

  • Oracle 9i Migration Tool for PL/SQL

    i tried to migrate the plsql code of my 6i forms to 9i via the oracle migration tool ifplsqlconv90 and always get the following error:
    "subclassed module could not be found....."
    although I have put the forms, that have been subclassed from, in the same directory.
    is it the case, that the tool does not work at all for forms that have subclassed items?
    thanks for your answer
    bernhard

    You can use the latest version.

  • Migration Tool for Oracle 8i

    Hi Friends !
    I want to migrate Sql Server 7 database to Oracle 8i. For this I have downloaded Oracle Migration Workbench from OTN. Bt when I tried to install it I got message "The Oracle Migration Workbench 2.0.2.0.0 must be installed into an Oracle 9.0.1 Home"
    I think the tool provided on OTN is for Oracle 9i. Where can I get the tool that will help me to migrate the databases to 8i ?
    Thanks in advance.
    Abhi

    812294 wrote:
    Can anyone tell me where i can download tool for Oracle reports developer for Oracle 10g? can you give me exact link?
    Thanks muchI am not clear what software you desire.
    http://otn.oracle.com
    Edited by: sb92075 on Sep 17, 2011 12:37 PM

  • Are there any recovery tools for optical media?

    I've had a couple of DVD's  turned in to coasters recently and I was hoping that Linux could come to my rescue with some awesome 'raw-read' / recovery tools for optical media?
    I burnt the discs in Windows 7 using InfraRecorder on a brand new Plextor drive (a 'PX-891SA') and these are my first attempts to burn discs with it so I'm a bit worried it could be a hardware fault!
    I started off trying to back up some files to clear some space on my hard-drive, burning them to a dual-layer dvd, but the software kept failing to even start the burn process -- that was until I realised that I needed to run the program "as Administrator" (in Windows). It did then manage to burn the disc (I was using "Session-at-Once" mode) however when it came to the end of the burn process / the start of the 'verify data' phase it threw an error saying the write process had failed! Windows couldn't access the disc / data and (I think) still thought the disk was empty. So I restarted the burning application and used a function to just 'close' the whole disc. This seemed to work because Windows was then able to recognise the disc and read the data, although accessing the disc was slow and sounded 'stutter' ish.
    I then tried to write a single layer dvd to finish off the last couple of gig I had to back up, but again the software completed the burn phase only to report a 'fail' error right at the end (I'm assuming) before finalising the disc. Although this time I'd tried to create a multi-session disc by using the '2XXA' (or something) 'Multi-Session' iso9660 format. The result was that Windows couldn't read the disc and still thought it was empty, even after trying a forced 'close disc' operation! -- Linux however could read the disc and see that the data had in fact been burnt to the disc (although I've not yet tried copying it in Linux!).
    Finally I needed to burn a load of archives to a couple of discs (totaling ~9GiB) -- starting with a dual-layer dvd first everything seemed to be working fine, the burn process started okay and the write buffer was full etc., until at what I assume was the layer change-over it all came to a grinding halt and threw another 'write operation failed' error, only this time I can't even mount the disk in Linux....see 'dmesg | tail' output below:
    [ 5758.353005] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 5758.353015] ISOFS: Interleaved files not (yet) supported.
    [ 5758.353016] ISOFS: File unit size != 0 for ISO file (1472).
    [ 5758.353019] ISOFS: changing to secondary root
    [ 5758.353035] ISOFS: Interleaved files not (yet) supported.
    [ 5758.353036] ISOFS: File unit size != 0 for ISO file (1536).
    [ 5758.353037] isofs_fill_super: root inode is not a directory. Corrupted media?
    Does anyone have any thought or suggestions that might help?
    - Is it likely to be a hardware fault? (I bought a Plextor because I thought they were one of the best!)
    Maybe even if I could just close the session all would not be lost?
    -- Thanks in advance --
    >>>> UPDATE >>>>
    I tried to use ddrescue....it was fine until it got to the end of the disk and then it sounded like the drive was chewing on a bag of pork scratchings
    $ sudo ddrescue -v /dev/sr0 /mnt/odd/ddr.file ~/ddr.log
    GNU ddrescue 1.16
    About to copy 4029 MBytes from /dev/sr0 to /mnt/odd/ddr.file
    Starting positions: infile = 0 B, outfile = 0 B
    Copy block size: 128 sectors Initial skip size: 128 sectors
    Sector size: 512 Bytes
    Press Ctrl-C to interrupt
    rescued: 4028 MB, errsize: 983 kB, current rate: 0 B/s
    ipos: 4028 MB, errors: 1, average rate: 3310 kB/s
    opos: 4028 MB, time since last successful read: 10.8 m
    Splitting failed blocks...
    Interrupted by user
    ...it was taking forever and getting nowhere so I just pressed 'ctrl+c'.....here's the log file:
    # Rescue Logfile. Created by GNU ddrescue version 1.16
    # Command line: ddrescue -v /dev/sr0 /mnt/odd/ddr.file /home/shodan/ddr.log
    # current_pos current_status
    0xF0213000 /
    # pos size status
    0x00000000 0xF0208000 +
    0xF0208000 0x0000B000 -
    0xF0213000 0x0000D000 /
    0xF0220000 0x00000400 -
    0xF0220400 0x0001FE00 /
    0xF0240200 0x00000400 -
    0xF0240600 0x0003FE00 /
    0xF0280400 0x00000400 -
    0xF0280800 0x00077600 /
    0xF02F7E00 0x00000200 -
    When I tried to mount the output file using $ sudo mount -ro loop /mnt/odd/ddr.file /mnt/vodd I got the same error as with the actual disc (natch)...
    mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    missing codepage or helper program, or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so
    Last edited by wwgfd (2012-12-14 13:18:41)

    @chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
    I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
    The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
    However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
    ...the other folders did copy okay though!
    It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
    @ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
    @alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
    Thanks for the help!
    (pre-post) UPDATE >>> I've just mounted my Windows partition  in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

  • Migration tool for migrating Outlooksoft 4.2 to BPC 7.0 MS.

    Hi,
    We are planning to do the migration from Outlooksoft 4.2 to BPC 7.0 MS version. We donu2019t have the migration tool with us, to do the migration. I have already registered with http://www.planningandconsolidationupgrade.com.
    Can someone let me know the path to download the migration tool. It will be very much useful for me.
    Thanks in advance.
    Regards,
    JP.

    Hi JP,
    The migration tool is provided only to persons certified.
    In US and also in EMEA is already a certification program.
    I think it was already done a first workshop regarding the Migration tool in US having at the end an exam for certification.
    In EMEA the first workshop will be done next week between 11-13 May.
    Regards
    Sorin Radulescu

  • Role migration tool for EP6

    I beleive that there is a tool for migrating roles from Workplace 2.11 to EP5, does anybody know if there is the same tool available in EP6?
    I cannot find any documentation on this.

    Hi,
    yes there is indeed a tool in EP 6.0 for role migration from WP 2.11 or other SAP systems to EP6. You can find it in the portal under System Administration -> Transport -> Role Upload.
    The documentation can be found under:
    http://help.sap.com/saphelp_nw04/helpdata/en/41/5e4d40ecf00272e10000000a155106/frameset.htm
    The tool is also available for SP2 Patch4+, the documentation is the same.
    Please contact me, if you need further assistance.
    Kind Regards,
    Stefan Batzdorf

  • Any similar tool for MAC?

    Hi everyone:
    Anybody knows similar tool for MAC tiger?
    This one is for PC:
    http://www.seriousmagic.com/products/ultra/
    Thanks,
    Ferooz

    There's this:
    http://www.dvgarage.com/prod/prod.php?prod=dvmattefcp
    or these:
    http://www.borisfx.com/products/RED/index_3gl.php
    http://www.borisfx.com/products/CONTINUUM_COMPLETE
    Not used any though. You might get more of a response in the FCP forum if you are looking to spend a lot of money on a keyer.

Maybe you are looking for