Any monitor hoods for 24" LED displays?

I suppose the subject is the question
Anyone here know of any hood for the Apple 24" led's?
Thanks

You might also try:
http://www.integrated-color.com/mm5/merchant.mvc?Screen=PROD&StoreCode=ICC&Product_Code=CDHood&CategoryCode=Display+Calibration

Similar Messages

Autoscale has not been able to read any monitoring data for ...

We´re receiveing an Error Message from the Autoscale functionality for a complete week now. This has happened before when the "Storage incident" happened. But the problem was resoloved when the functionality of the Storage was fixed. But since
the 22th of December it seems that the autoscaling dosn´t work any more. All of the Autoscaled Machines are up while we´re having almost no traffic during the holidays.
Is there someone who has a solution? Or is this one of these "drop all machines and recreate them" issues?
The error message is:
Autoscale has not been able to read any monitoring data for XXX:XXX since 12/22/2014 11:39:01 AM UTC
Autoscale task failed for XXX:XXX due to no metrics available

Hi Marc,
We could view the
latest information from Azure Dashboard
http://azure.microsoft.com/en-us/status/#history
12/22
Storage - East US - Partial Service Interruption
From 10:10 to 11:40 UTC on 22 December, 2014 a limited subset of customers using Storage in East US may have experienced intermittent latency or time out errors when attempting to reach storage resources. This incident has now been mitigated.
Since
Autoscale requires monitoring data to be collected from your VM/role instances in order to scale . While
there have network issue on the storage
accounts that contain your monitoring data, so it will fail to autoscale.
Now, this incident has now been mitigated.I suggest that you could check if
Autoscale work vey well.
In addition,I suggest that you could refer to the link below
for more details regarding Autoscale not working:
https://social.msdn.microsoft.com/Forums/azure/en-US/bc2048c4-8d49-4c54-b150-f263808c4b7a/notification-could-not-automatically-scale-xxx-because-monitoring-data-was-not-found?forum=windowsazuremanagement
Best Regards,
Kevin Shen.

Volume controls stopped working properly for my LED Display

The volume controls stopped working properly for my LED Display (Mac Pro OS-X 10.6.8). The sliders go up and down, and the clicks are audible, but the sound levels remain the same. The internal speaker sound settings/controls are working properly. I tried restarting to no avail.

Resetting NVRAM?
http://support.apple.com/kb/HT1379?viewlocale=en_US

Is the warranty for 27" LED display worldwide/international?

Is the warranty for 27" LED display worldwide/international?
I'm going to by display for my MBP in USA, while living in Ukraine and using it in Ukraine most of the time? Does the warranty cover issues in my country?

will apple Malaysia replace a refurbished macbook under warranty bought in Australia?
You need confirmation directly from Apple about your concerns. Call the tech support center that handles your country Malaysia if there is none in Malaysia.

Is there any monitoring tool for web server and application server ?

experts,
I just want to know that is there any monitoring utility which being used to monitor the web server activities like threads web console session tracking and so on..
I am using Jboss as my application server.If you suggest any monitoring tool for Jboss It would be helpful for me,

You may use jConsole

Color Calibration for 27 " LED Display

I am shoping for a color calibration system for my 27 inch LED Display. I was planing on gettinga ColorMunki Photo but I am not certain it will work with a LED backlit display. What about the Spyder 3 route ?

I got the following response from Datacolor. So I guess the Spyder is an option.
Dear Thomas,
thank you very much for your message and your faith in Datacolor products.
The Spyder3 (Elite, Pro and Express) is fully compatible with latest display technologies, such as LED-Backlight, Wide-Gammut and screens with a glossy surface.
Best regards,

Calibration tool for 24" LED Display

Greetings, I'm currently using the 24" display with my MacBook Pro and am looking for calibration tool recommendations. I went to the Apple store and they sold me the Huey Pro from Pantone. I haven't opened it yet as I saw it had mixed reviews. It also says it's for CRT's and LCD's. Has anyone tried it on the 24" LED monitor? Successes/failures appreciated.
Thanks.

Brightness and Contrast settings are both dictated by ambient light in the room. There is no set point, and so day and night modes are used for this reason. For this properly setup, you need to use a test pattern which shows the greyscale detail and increments from black to white. Typically "pluge" or blinking patterns are used as well.
After setting those up, you DO NOT want ambient light present when using your meter. Meter's don't have peripheral vision like we do to compensate for room lighting tones... therefore, either work in the dark, or drape something over the sensor & screen.
Here is a free download to get some patterns:
http://spectracal.com/download_HTPC.html
Good luck.

I need to know if there is any monitoring softwear for my teenager's phone

Is there a program I can install on my teenager's iphone so I can monitor their activity, chats, texts, etc?

Not in any global way, no. You can set up Messages on your own iPhone (or a Mac) to your teen's Apple ID (or whatever settings he/she is using) which would allow you to monitor anything sent via iMessages, but that won't allow you to see SMS/MMS messages. For that you'd have to contact the cell carrier and ask if they have any sort of parental monitoring option. As to web surfing, in iOS 7 there's some limited ways of seeing web browser history, or you could lock off Safari and force the teen to use a third-party web browser that might offer better monitoring (MobiCIP and the McGruff browser come to mind as possibilities). There's nothing that would allow you to monitor the apps the teen is using.
Regards.

Using the LED display as a heater!

Hello,
I'm living in a student dorm in UK and it's pretty cold in the night.
My central heater is not always turning on and I always have a trouble complaining to the accommodation office.
Now I have a 24" LED cinema display and my problem is gone. I can feel strong background heat in my room after having the display turned on about 1 hour.
So it's a buy-1-get-1-free: Display and a room heater in one prize. Cool, isn't it? (Well, I mean, hot...)
Back to serious thing. I would like to know if it is a normal for a LED display. Since I never had a display before, only had a laptop.
I touched everywhere of the screen, back and front, and feel the same heat dispersed all over its body. There is especially heat coming out from the bottom mesh, where I always put a cup of tea there and keep it warm.
Overall, no problem for me, but I don't know if it will cause any damage to the display in the long run. I have no AppleCare for this display because I did not purchase the same time as my laptop, and purchase a new protection plan is expensive though.

Mine gets very warm also. Remember the power source is now inside of the display. Its vented at the bottom, and helps to keep my hands warm while typing. But its perfectly normal. If you check the LED displays at the Apple stores, they too generate a lot of heat. Even my 40" Sony XBR LCD TV gets warm, so I think that is normal.

Monitor Recommendations for Use with Captivate

Anyone have any monitor recommendations for use with Captivate? Size and resolution?

The formal adobe recommendation is as posted 1024x768 is fine.
But, monitors are not that expensive, so for productivity and better work environment I recommend at least one wide screen 22" with resolution 1600X1200 or more and that supports 1080 for video.
You need the wide screen ( or two monitors) so you can work with all the tools in one view.

Monitoring scripts for AlwaysOn Availability Group

Does anyone have any any monitoring scripts for AlwaysOn AG using Transact SQL or stored procedures? I'm not a strong coder and don't know Powershell at all. But if there are some Powershell scripts we may be able to use them. I've
seen the dashboard but that's only good if you're logged onto it.
I'm looking for things like monitoring when a database is suspended, send an alert to us but also tries to do the resume.
Thanks for any info.

Start with this list
http://technet.microsoft.com/en-us/library/ff877954.aspx
Automating the issue resolution has to conform to your operational standards. For example, if you use a file share witness for your quorum configuration and your monitoring tells you that it is offline, do you automate bringing it online or do you escalate
to your infrastructure team so that they can look into it? If the database is suspended or the Availability Group in offline state, do you just bring it online or do you check other dependencies like the quorum configuration and instead perform a forced quorum?
I'm a big fan of automation but make sure you define your process first so that you don't cause more issues as a result.
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Autoscale has not been able to read any monitoring data

I keep getting daily warnings that Autoscale cannot read metric or metric data is not available.
message is;
"Autoscale has not been able to read any monitoring data for centaur-ex since 3/4/2014 10:03:06 AM UTC"
what is the issue here?

Hi Dean,
Please refer the following link as it might provide you more information regarding Autoscale not working:
https://social.msdn.microsoft.com/Forums/azure/en-US/bc2048c4-8d49-4c54-b150-f263808c4b7a/notification-could-not-automatically-scale-xxx-because-monitoring-data-was-not-found?forum=windowsazuremanagement
Regards,
Manu Rekhar

MacBook Pro 15" LED display

Hi
I am wondering if the problem of flickering displays will ever be properly eliminated by future updates by apple.
I already returned my first LED MacBoo Pro for the yellow screen tint, and have a new one wich tends to flicker on the uper third of the display even after all the software and firmware updates.
Is this a long-term problem, or do I just hope that the right update will come soon?
Thanks
Martin

You can buy a VESA Mount Adapter Kit for 24" LED Display and then connect an Ergotron MX Desk Mount to the display so then you can have a display that is able to move freely above your desk, and essentially have your Macbook Pro beneath it. This is the set up I plan to have for my dorm desk in a few weeks.
Ergotron MX Desk Mount:
http://store.apple.com/us/product/TV273LL/A?fnode=MTY1NDA5OQ&mco=MTA4NjQ3MTA&p=1 &s=topSellers
VESA Mount Adapter Kit for 24" LED Display:
http://store.apple.com/us/product/MC434ZM/A?fnode=MTY1NDA5OQ&mco=MTUzNDc4NDg

Best stand for MacBook Pro and Apple LED Display

I am buying a MacBook Pro and Apple LED Display tomorrow. I want to have a two display setup, similar to what I have seen in the Apple Store. I believe they used a Griffin Elevator. I want to make sure of two things: that the stand is sturdy enough so that my laptop won't slide off of it and that I can adjust the stand/monitor so that the tops are level (so that moving my mouse from the laptop to monitor and back is smooth - i.e. the cursor doesn't jump up or down.
I like the fact that I can use this setup to go mobile very quickly, but what about my direct Ethernet connection. I wish there were a stand/dock such that I could hook everything up to it and then just undock the entire machine.

How did you solve the problem of closing the Macbook Pro when it was connected to the display and preventing it from going to sleep?
I am thinking about buying one. When I went to the local Apple Store the tech guys told me that it would be necessary to keep the laptop open slightly when connecting it to the display. They said it was something to do with cooling. It didn't sound right to me. I'm sure that Apple didn't solely intend for the Cinema Displays to be used by Mac Pro and Mac Mini users.
There must be a simple way to "dock" or connect a Mac laptop (Macbook Pro or Macbook) to an Apple Cinema display or any other display with DVI input while keeping the laptop closed with an external keyboard and mouse connected and still be able to use the SuperDrive.
I'm very curious about how you handled this.
All the best for now,
Ambrose

Any workaround for bad vertical display?

See what Acrobat does on a vertical monitor...
Just encountered this with a new monitor.
The dark grey border indicated the separation between an Apple 30" Cinema Display on the right, and a 24" Dell Ultrasharp on the left.
The Dell monitor on the left is rotated 90° for a vertical display. All apps work great with these except Acrobat Pro 9.0.0. Seems Acrobat just throws the pixel ration way out of whack when a document is moved to the vertical display.
I don't see any aspect ratio settings in Acrobat.
I've already filed this as a bug, but I'm curious if anyone has any insight to a possible correction - preference, setting, anything?
Thanks

Thanks, this has been driving me nuts for weeks. Every time I dragged a PDF to one of my vertically rotated monitors the aspect ratio got totally whacked out.
It seems like the solution is simply to not use the “System Default” resolution option. Any custom setting, even manually setting it to 93 pixels/inch (the exact same resolution as the System Default) corrects the distorted aspect ratio problem.
Adobe should fix this bug. It’s been around for several updates.

Any monitor hoods for 24" LED displays?

Similar Messages

Maybe you are looking for