Any need for malware software with 10.9.2?  Recent fraudulent withdrawals from an account managed on an i-Mac.  Bank suspects malware introduced by the computer.  Is this a possibility?  Using latest version of Mavericks.

I have had a recent fraudulent set of withdrawals from a an account which is managed online via an iMac, using Mavericks 10.9.2.  Bank believes that malware on the iMac may be the source.  Is this a possibility?  Apple experts say it is highly unlikely. 

Unless the bank can PROVE that the unauthorized withdrawals were initiated FROM that Mac... They're blowing smoke up your backside.

Similar Messages

  • Just downloaded Yosemite to my iMac (was using latest version of Maverick) and all I get is white screen.

    I just attempted to download and install Yosemite OS to my iMac (was using Maverick v. 10.9.5)
    After the install and restart, the computer freezes at a white screen and will proceed no further with finalizing the installation.

    Appears that you have a hosed installation. Boot into recovery mode and reinstall the OS. Once back up and running, check to see which OS was installed. If Mavericks, then try another Yosemite installation. Hopefully, you saved a copy of that installer outside of /Applications; otherwise, you'll have to waste time, electricity, and bandwidth downloading the ill-designed installer app which blows itself away as part of its installation process.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Any need for inactive memory with latest SSD drives?

    I have an iMac with a combo drive with 24 gb of RAM. At times my inactive memory exceeds 10 gb and my available memory goes to zero. And Mavericks is slow to give the memory back.  Given the efficiency and speed of the latest SSD drives, does earmaking memory to an inactive state serve any useful purpose when using a SSD drive?.

    I believe there is, as RAM speed is still much better than SSD speed. Most inactive RAM queries stem from the fact that "inactive RAM" is a misnomer. For a pretty full explanation, have a look at my second-last reply at the bottom of page 3 of this discussion:
    https://discussions.apple.com/thread/6058988?start=30&tstart=0
    Hope it helps

  • I have a Macbook Air with Mountain Lion..I upgraded to the latest version called Mavericks OX now it crashes a lot...when I use the shift key especially I now have version 10.9

    I have a Macbook Air with Mountain Lion..I upgraded to the latest version called mavericks ox now it crashes a lot...when I use the shift and Caps keys especially. I now have version 10.9. how can I get mountain lion back and get rid of this update?

    all of my software was current before i upgraded to maverick....i don't know why this is going on...any help?

  • [svn] 640: Removing unnecessary dependencies on ant-contrib; we no longer have any need for it.

    Revision: 640
    Author: [email protected]
    Date: 2008-02-23 16:44:05 -0800 (Sat, 23 Feb 2008)
    Log Message:
    Removing unnecessary dependencies on ant-contrib; we no longer have any need for it.
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/tests/checkinapp/build.xml
    flex/sdk/branches/3.0.x/modules/compiler/build.xml

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • When using time machine with external hardrive to backup, some music items from iTunes and some photos from iPhoto do not transfer to backup hardrive.  What am I ding wrong?  Using latest version of mountain lion.

    When I use time machine with my external harddrive to back up computer, some music from iTunes library, and some photos from iPhoto library are missing when I check backup disk.  I am using latest version of mountain lion.  Am I doing something wrong?

    First, Time Machine doesn't completely back up the iPhoto library while iPhoto is running. Make sure you quit iPhoto after making any changes to allow a backup to take place.
    This simple procedure will clear your Time Machine settings, including both overt and hidden exclusions. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
    Triple-click the line below to select it:
    /Library/Preferences/com.apple.TimeMachine.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a file selected. Copy it to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot, recreate your settings in the Time Machine preference pane, and run a backup to test. If TM now performs as expected, delete the file you copied to the Desktop.

  • Are there any fee for developing software for USB non NI harware?

    We develop applications in LabView for pieces of hardware witch communicate via USB. Are there any fee for developing software for USB non NI harware?

    If you really mean distributing software that you developed, then you and a lawyer might want to review the LabVIEW software license - especially the section on distribution requirements (in my 6.1 version it's section 12). You should also contact NI directly and ask them. This forum is primarily made up of LabVIEW end-users and any legal advice you get here is worth exactly what it costs, in other words, nothing.

  • Any app , for video chat with AIM users???

    please recommend any app for video chat with AIM user???

    Hi
    The latest version of AIM (called Triton) doesn't work with iChat. Have you tried version 5.9 of the AIM application on the PC?
    If that doesn't work for you, you could try Trillian, which has a better picture than AIM (The AIM video window is very small and not resizeable). The Trillian Pro version, required for video, costs $25 but you can try it free for 14 days.
    Dave

  • There's no agree button on the new iTunes terms and conditions, so I can't buy any apps for my iPhone5, with iOS7. Any suggestions? Three E-mail exchanges with Apple didn't help,can you?

    There's no agree button on the new iTunes terms and conditions, so I can't buy any apps for my iPhone5, with iOS7. Any suggestions? Three E-mail exchanges with Apple didn't help,can you?

    Yes me too, tried re setting and enabling changes but no agree button anywhere?

  • What Kind of microcontr​oller is needed for alarm system with PIR sensors

    Hi ! I'm student at Technical University Varna , 
    Bulgaria . I'm interessted to create my own alarm system with Labview,
    but I'm not sure what kind of controller i need and what kind of PIR
    sensors.                  Thank You

    This is duplicate post:
    What Kind of microcontroller is needed for alarm system with PIR sensors

  • Is there an alternative method to sync Safari bookmarks without using iCloud? I am running the latest versions of Mavericks, iOS and iTunes.

    Is there a method to sync Safari bookmarks from my Mac to my iPhone WITHOUT using iCloud?
    I am running the latest versions of Mavericks, iTunes and iOS.

    Hi Mary ..
    Afraid not but if you decide to use iCloud and you're iPhone is running iOS 8, (according to your profile), hold off until you can upgrade your Mac to Yosemite.
    Please read >  http://www.macrumors.com/2014/09/29/reset-all-settings-icloud-drive-bug/
    Apple - iCloud - Learn how to set up iCloud on all your devices.

  • Hi i want to buy External hard disk which supports mac os latest versions upto mavericks, please suggest me which one is best.

    Hi i want to buy External hard disk which supports mac os latest versions upto mavericks, please suggest me which one is best.

    Check out something like this, I have a couple and they have great. Get the amount of storage that you will need.
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  • [32282.000367] firefox:2114 freeing invalid memtype c02f2000-c0302000 I get this from system log using latest version of Firefox: What kind of problem is this?

    I get this from system log using latest version of Firefox:
    [32282.000367] firefox:2114 freeing invalid memtype c02f2000-c0302000
    What kind of problem is this?
    Anyway Firefox seem to be working correct. I would like to be sure that it'snt a security problem.

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • Massive memory usage when using latest version of final cut, 10 minutes after restart.

    Hey I am really struggling with using Final Cut Pro X and I suspect there is some software issue.
    I am editing a one minute video clip, the video files are 1080 h264. I restart my computer and only open final cut. After 10 minutes of editing I cant barely navigate my computer anymore as it is going so slow, until eventually I have to force reboot my computer. I can scarcly export anything out of final cut, when I do my computer feels like its about to die and if it exports I seem to get broken frames and/or missing media.
    I reinstalled my mac only about 2 months ago.
    System specs.
    Mac book pro.
    13-inch, Late 2011
    Processor  2.4 GHz Intel Core i5
    Memory  4 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 384 MB
    On my previous mac book pro (early 2010, 4 gm ram), running snow leopard and previous versions of final cut I was able to edit 3, 1 hour documentaries with very little problem, but now I cant even manage a one minute clip.
    Not sure what to do. Here is a screen shot of my memory usage. Im getting massive swap memory and lots of inactive memory. It seems very strange. Especially after only 10 minutes running only final cut.

    FCP is only using 409 MBs of memory out of your 4 GBs. But whatever else you have open is using up virtually all the physical RAM you have. This is forcing the memory manager to page memory out to the disk-based VM file. That's a major reason for major slowdowns.
    You have 4 GBs of RAM. How many applications are you running concurrently? If you look at Page outs: you will note the positive number in parentheses. That means your computer is hitting the hard drive a lot because the memory demands are too high. If possible cut down on how many concurrent applications you run or put more RAM into the computer, if that's possible.
    About OS X Memory Management and Usage
    Using Activity Monitor to read System Memory & determine how much RAM is used
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent.  It will improve the performance of applications that run mostly in RAM or when loading programs.

  • How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

    The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
    I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4).  Everytime I open the airport utility I get the following message: "
    This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
    I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
    One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
    I'm getting the exact same message on my other computer, a Mac Air.
    So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
    Thanks!

    See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Maybe you are looking for