Any new technology for volume adjustment so all songs sound the same?

It's the age old question about volume adjustment and playback - when all songs sound different. And we all know the sound check feature doesn't work that well - especially when you have songs in different bit rates. I play my iPod over a very large sound system and the differences in volume are shocking.
It doesn't look like anything works, after all these years. Someone recommended putting ALL the songs up to 100% in the volume adjustment ... but that can't possibly work, can it?
Have there been ANY improvements in sound adjustment??? Or am I still stuck adjusting each song myself?

Are you speaking from experience? From what I've seen, it's 30 bucks ... with mixed reviews. I use the iPod for broadcasting over a large sound system - maybe it's not the way to go (as some have recommended NOT using iPods to broadcast over public places) - but is there ANY foolproof method? If iVolume does, indeed, work ..... I have no problem shelling out $30 for it. Or is the human ear still the way to go??? (I currently, painstakingly, adjust each song - one by one!)

Similar Messages

  • I have a credit card with my account first change was a new account, but when you bought any new product for my account is rejection, noting that the credit card was used to my previous account was changed to none

    I have a credit card with my account first change was a new account, but when you bought any new product for my account is rejection, noting that the credit card was used to my previous account was changed to none

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT4436 I have an existing Apple ID that I use for my IPOD Touch.  I just received an Iphone 4S to replace my existing Blackberry that broke.  Can I set up a new ID for my work phone, but still use the same laptop that I use for my Ipod Touch?

    I have an existing Apple ID for my Ipod touch being used via my laptop.  I just received an Iphone 4S as a replacement for my Blackberry Curve that broke, that goes through Verizon.  Do I set up a separate Apple ID for the phone, and will it work with the same laptop? Can one computer work with two ID's and two different devices?

    No need to create a New Apple ID... your Existing one will work fine...
    Apple ID FAQ  >  http://support.apple.com/kb/HE37

  • How can I kepp all songs on the same album?

    Some of my albums that have duets on them will show up as multiple albums when they were ripped from the same CD. Is there a way to make them all under the same album cover. I also have some artists that under an artist search will show up with multiple different headings of the same artist. I'm using the Ipod on a Kenwood car head unit.

    I add it to the title as I've described, i.e. *Title \[Feat. Guest\]*. This means that all the information is still visible when playing the track in iTunes or on the iPod and can also be used when searching.
    To fix things I set my library up in List view with the browser turned on and the columns arranged so that I could see both Artist & Album Artist. I then selected the first album in Album section of the browser to show it's tracks. Pressing the down arrow on the keyboard shows the next album. A brief glance will reveal if some tracks of the album have different artist values, in which case these can be fixed before moving on to the next album. It should take less than a second per album to confirm that it is properly formatted as your eyes will rapidly notice any inconsistency in the artist column. The process is only time consuming when you actually need to make some changes.
    If two different artists have albums with the same album title, e.g. Greatest Hits, this also shows up when working methodically through this list. I've chosen to rename the albums in the form *Album - Artist* as this separates the albums, makes it clear in the browser which album is which and puts them in artist order. Another approach is adding different numbers of trailing spaces for each different album.
    tt2

  • Does anyone know how to keep all songs in the same album when they say featuring someone?

    Each time I load a CD onto Itunes that has an artist who features another artist on that particular song, it puts it in my library as a separate CD even though it will have the same album listed.  For instance Lady Gaga's song just dance features Colby O'Donnis that song is in its own spot while the rest of the cd is together that one song is separate and I don't know how to keep them all together.  Someone help.

    Get the Informations for that song and have a look in the "Sorting" area if there is something different. The data inserted there is just for how iTunes will order the songs.
    If the Interpret in the general informations is "Lady Gaga" and in the sorting area is "Lady Gaga feat. xxxx" than you'll see Lady Gaga as the interpret but it's sort to a second entry "Lady Gaga feat. xxxx".

  • GB saves all songs by the same name.

    I am recording sermons at my church that are made into podcasts and put on our Facebook page. I can save the sermon by the proper name and there is no problem with this task. But, when I share the song to my iTunes library it always saves the sermon by the name of the first sermon I produced. I have to put the name of the sermon in the album title so I can find it and rename it. Then, I uloaded these sermons to the iTunes Store and it picks up the name of the first sermon as well. Where do I go to change the name of each title I save in Garageband?  When I share the sermon to iTunes a form pops up, but there is not a blank to insert the name of the sermon.

    GarageBand will use the filename of the GarageBand project as the name of the song title in iTunes. The general idea is, that you create a new project file for each song. Do you use the same GarageBand project file for each new sermon over and over again? Then rename the project.band file in the Finder to reflect the name of the sermon, before you share the project to iTunes.
    Regards
    Léonie

  • I changed all songs to the same artist by mistake ...help!

    I accidently changed all my 712 songs to have the same artist. Is there a way to fix them back without manually typing in each artist?
    My son says i can use idump to put the songs from my ipod (which are correct) into a file, then load them into itunes.
    Thanks.
    Mike

    My son says i can use idump to put the songs from my ipod (which are correct) into a file, then load them into itunes
    Yes.
    Were these songs RIP'd from CD using iTunes?
    If so, select them, then menu Advanced -> Get CD track names.

  • I got a new iPhone for my cousin and she is using the same the Apple ID as mine and now when I send her text messages to her number, it's sending it to myself and not her. What do I do?

    I am also receiving random text messages from some of her contacts, and she is not getting them. 

    If it's just a text message and not iMessage that is a problem with the service provider.  You should take the iPhone back to the store and explain to them what is going on. 

  • I would like to know how to insure that all track from a CD I rip into i-tunes all go into the same file regardless of the artist on the CD. I was recdently importing an All Time Low CD into i-Tunes for my daughter and because one track featured a guest a

    i would like to be able to insure that when i import a CD into i-Tunes that all tracks from that CD go into a single file for that album in their proper order regardless of whether or not there is a featured artist on one or two tracks or whatever. i recentl;y imported an All Time Low CD into i-Tunes for my daughter and because one song featured a guest artist i-Tunes placed that song in a seperate folder and so when i synced my daughters i-Pod Touch that one track is not with the rest of the tracks form the album and has to be listened to seperately. The song is from the same album and should be where it belongs with the rest of that album so she can listen to the entire album with the tracks in the proper order. I am sure that this can be done i just don't know how.

    Edit the Name of the problem song to Name [Feat. Guest]
    Change the Artist of that song to All Time Low
    marley2012 wrote:
    ... and i want to make sure that from now on all songs from any CD I import into i-tunes all go into the same album file if they are on that album originally. i do not want i-tunes seperating songs from my CD's for any reason. hopefully this is more clear.
    What you want cannot be done. iTunes has its quirks, and the above is the kind of workaround needed to make the media display sensibly on any device. The article I pointed you to has others that you may find useful in future.
    tt2

  • I have a problem with syncing my calander with outlook 2007 for iPhone 5s, ipad 1st and 3rd generation. Contacts work find, and new and changed enteries in outlook all go to the devices. Device Cal changes do not appear in Outlook

    Over the past year or so, I have been unable to fully sync my iPads with outlook 2007 calander. Now I have an iPhone 5s, and really need the calander fixed. Contacts seem to sync in both directions, and any new or changed cal enteries in outlook appear on the device. The problem is that any new or changed calander enteries do not make ip back to outlook 2007, so there is only one-way syncing (down to the device) but no return, for calander entries.
    I am now using the latest itunes, which I followed the recommendation delete all apple stuff, and then reinstall, I have used scanpst, built new PSts, etc, am I am stuck.
    Not using icloud either.
    Not using wi-fi, purely USB cabale sync
    Running on Windows XP, SP3
    Now IOS 7.0.2 on iPhone and 1 iPad (3rd gen)

    Kept searching, found this: https://discussions.apple.com/message/23321067#23321067
    Bottom line: if you follow the recommendation to delte all itunes software and re-install, it don't work (at least for me and many others).
    However, purge the data (certain data) and the data syncs.
    I think the folder is Apple Computer\Preferences and it needs to be purged.
    To be sure, maybe someone can rename the folder on their system, then run itunes and see if it syncs ok.
    The idea is to figure out the least minimum stuff that needs to be touched in order to get a working solution than having to purge all Apple software and then rebuild it all over again.
    I had purged other files out of inpatience, but did not want to purge entire folders because I had Safari, and Quicktime software, and did not want to wipe that out, Plus there were software downloads and device backups in some of those folders. But I really believe it is the preferences folder, and I would like someone with the same problem to try it and verify it.
    Once the preferences folder is removed/renamed (taken out of the picture) pluggin in the device and go to the INFO (I think that is the iTunes tab) page where you select calanders, contacts, email accounts, etc. They will all be unchecked (because you wiped out the preferences) and you need to reselect them. Then run your sync.
    What I had done in testing was create something on the device, and modify something else on the device looking to see what got up to Outlook. I got the good news that something good was happening when I got the conflict message from iTunes, and it showed both Outlook and iPhone, showing the calander entry I changed on the iPhone. Never got that before. After the sync, everything looked good the few test entries were uploaded to outlook.
    Now, My Cal is 10L+ enteries, and I am doing 100% sync (I don't select the option to ignore enteries over x days). I also have 1400+ contacts. Before this change, the sync of contacts & calanders took a couple of hours (and only operated ONE-WAY, now the syn is taking less than 5 minutes for this one step.
    I am a Windows XP Professional user, x32 bit system, using Outlook 2007, iTunes 11.1.1.11, I am standalone (no exchange server) and have about 10 email accounts (mainly POP) defined. I am using only one calander in outlook, but I have Outlook and 2 gmail calanders in the iPhone.
    I am running iPhone 5s and iPad 3rd Gen both with IOS 7.0.2 and a 1st generation iPad with the latest version of IOS 5.x.
    If anyone else has success, I'd like to hear, along with your experience.

  • My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    Hi cindy,
    If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
    Here's what I mean:
    If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
    However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
    You would need to authorize the computer for each of the new Apple IDs.
    Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
    So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
    The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
    Hope that helps,
    GB

  • Software Update doesn't have any new software for your computer at this time

    HI
    I manged to get all my updates downlaoded and on my server, i have currently enabled 133 of 400 updates.
    I have changed my snow leopard machine to point to the internal update server
    But then after a while of checking this displays software Update doesn't have any new software for your computer at this time
    Which is a Lie, because i know there are updates on the server that the computer needs to have.
    Any Ideas
    Many Thanks

    Oh i forgot to say in consol (from the client) i get can't instantiate distribution from server address  error Domain=NSXMLParserErrorDomain code=70 etc
    Any ideas anyone?

  • New nano - music is loaded, nano is charged, volume settings are all on but the music does not play thru the earphones?

    New nano (7th generation) - music is loaded, nano is charged, volume setting are all on but the music does not play thru the earbuds,  Checked with a different pair with same results...I'm sure I must have something not turned on that should be but not sure - help!

    Hi deb253,
    If you are having sound issues with your new iPod Nano, you may find the following article helpful (it is aimed at the 6th Gen, but the steps should be similar for the 7th):
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Regards,
    - Brenden

  • I wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support

    i wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support?

    basically I’m doing a project were I wanted to find out if there are recent technology  out that provides technical support for example they do it with remote access but is they any new ways that  they can support us and just wanted to find out if icloud gives technical support then how?

  • Is it Possible in JSF? Can anyone recommend any java Technology for this?

    I am doing Post Graduate Degree in Computer Science. This is my final semester and doing project work.
    Any body having idea about my requirment, help and guide to me
    My description and questions are as follows:
    Current Approach:
    PHP has been used to achieve the flexibility of creating custom images on-the-fly. Using this approach we were able to create a web-interface similar to the application client, where we could display links and get the exact look and feel of the application client.
    Drawback:
    This approach forces us to use two different technologies Java and PHP, since our system uses 'Java' accessing all the API's from PHP becomes a problem. while PHP provides a way to invoke any java method. It comes with a draw back, the method calls are little slow. This delay's are loading of web-page.
    Requirment:
    1. Creating custom images on various locations of the screen
    2. The Exact look and feel of the application map should be achieved
    3. Place elements and links correctly as in application-client reflect any changes
    4. Generation events on the Links and Elements
    5. Setting Backgroud images for different maps
    Questions:
    1. is it possible in JavaServer Faces (BETA)?
    2. If it is possible is JavaServer Faces(BETA) How to create custom images and create interfaces among them?
    3.Can anyone recommend any java Technology for doing this?
    Anybody having idea, help and guide me for doing my project

    hi,
    I think you can use JSF
    cheers
    Trajano

Maybe you are looking for

  • Error while running adlnkoh.sh. Please check logfile

    Hi All, i got this error while cloning i ran perl adcfgclone.pl dbTechStack on db tier Starting ORACLE_HOME relinking... Instantiating adlnkoh.sh Starting relink of ORACLE_HOME - RDBMS Adding execute permission to : /erpapp/prod/proddb/10.2.0/appsuti

  • Availability check issue in SD

    Hello everyone I am currently having some issues during the ATP in Sales Order in SD. We are using Check Group 02 - A (Sales Order) with the following settings: Stock Overview --- *all are unchecked* Relenishment Lead Time -- *"Check without RLT" is

  • Column p3 (id#/block#) in v$session_wait/v$active_session_history

    The environment is 10.2.0.3 in AIX 5.3.0.0 in a two node cluster. In v$session_wait/v$active_session_history, the column p3 is reffered as For gc buffer busy waits - id# and For buffer busy waits - Class# (1)Could somebody please explain what exactly

  • MacMini and Leopard

    Well! I recently bought a MacMini because the motherboard on my eMac allegedly croaked. The replacement cost wasn't much more than a new mini so I figured, "what the heck." Then, I upgraded to Mac OS 10.5 the day after it became available. Since inst

  • Ending a process chain with abap program

    Hello friends. Can anyone help me please? I have a problem with a process chain in BW. The process chain is triggered by the MF BP_EVENT_RAISE in an custom MF. While the process chain works, the custom MF is monitoring the chain´s log. This process c