Any new update on Flash support on iPad

Hi All,
This was a long time question and I am asking this again - Will iPad support Flash > Browser(Safari)
I tried using SkyFire and found it was not as comfortable/similar when it was broswed using a web browser.
Also knowing it very well about the details referring. https://discussions.apple.com/thread/2722456
Can any one help me to answer my client:
1. There are customers who are unaware of all these technoligies stuff and still they think iPad will come with Falsh support - How to answere there questions.
2. The iPad innovation will made every single source of FLASH file to convert them to HTML-5 to support the view in iPad. Which is again a rework and  makes every flash developer to work on conversions.
I am little confused about the above list of items. and
Any answere will help me out.
In near future - hoping apples new ceo will do something on this
iPad 2 | 64 GB | 3G
Thanks,
ROCXY

It is doubtful that flash will ever be supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ (and I doubt that that will change with a new CEO). Also Adobe have apparently given up on trying to create a version that works on iOS devices.
Third-party browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites - but judging by the reviews not all sites.
The iPad supports HTML5 and more websites are either switching to HTML5 or a combination of HTML5 and flash - but it's not an overnight switch/change.

Similar Messages

  • Does photoshop touch have any new updates?

    does photoshop touch have any new updates?

    Does this Forum focus on Photoshop as opposed to the companion apps?
    http://forums.adobe.com/community/creative_cloud_touch_apps/adobe_photoshop_touch

  • After downloading the new update ios 6 for the iPad , I can not find the YouTube app

    After downloading the new update ios 6 for the iPad , I can not find the YouTube app. Is there a way to get the YouTube app back?

    It's now not part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
     Cheers, Tom

  • Software Update/iTunes Update does not show any new updates

    My mac is on a new internet provider and OS X update, and even iTunes update, no longer work properly. The OS update reports no new updates (even though new updates exist: TimeMachine and Airport Update v1.0, Security Update 2008-002 v1.0,...).
    The problem has been isolated to an outgoing IP address: 24.29.138.* (cpe-24-29-138-??.nyc.res.rr.com, where ?? is a range of ip addresses 11 to 96) used or referenced whenever OS Software update or iTunes update is run. Whois reports the IP range as Road Runner, presumable residential services (and not apple). The outgoing service provider has that range of IP addresses blocked.
    Anybody else see this? Anybody know why the mac update services reference *.nyc.res.rr.com? Any solution besides taking my mac to another internet provider service for updates?
    Thanks.

    Kappy,
    Yes, cable modems were switched. Never had RoadRunner/Bright House service (now or then). Went from Cox to Uverse. Believe the MacBook was added after service providers were changed, but nonetheless, have reset the mac at least twice (upgrade from Tiger to Leopard required tech support to get it working, which included several "hard" resets), the modem/router has been reset several times (with several instances of +24 hours between shut-down and restarts). The fiber service has the modem and router combined, so resetting is a single operation.
    From Network Settings, I have valid IP addresses and it is using DHCP.
    I have VirusBarrier installed, along with NetBarrier, which is how I learned about the odd outgoing connection via RoadRunner during mac/iTunes updates. VirusBarrier reported no spy/malware.
    When you run Mac OS Software Update or attempt to download iTunes updates, your system does not connect (or attempt to connect) to any non-apple IP addresses? Just like to confirm if anybody else see this or not?
    Even posting to this discussion board causes an outgoing connection to cpe-24-29-138-65.nyc.res.rr.com TCP Port 54450 and working up to 54537, appears to be an outgoing message every 30 seconds to the next Port in sequence.
    Any ideas what is happening? Booted up the Powerbook G4 on the same network, has the same outgoing connection to nyc.res.rr.com.

  • IMac G5 stops updating at 10.4.10, will not install any newer update/itunes

    My first post, let's make it a good one. I have two macs so I fell behind on updating this iMac due to a poor iternet connection. Now that I have a solid internet connection, I can't update it!
    About my iMac:
    Machine Name: iMac G5
    Machine Model: PowerMac12,1
    CPU Type: PowerPC G5 (3.1)
    Number Of CPUs: 1
    CPU Speed: 2.1 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 512 MB
    Bus Speed: 700 MHz
    Boot ROM Version: 5.2.6f1
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 174.74 GB
    Everything I find just seems to go womp, womp, woommppp in my face. I have verified and repaired both the disk & permissions, cleaned up cache files, validated preference files... all to no avail.
    Please help, what can I do to install 10.4.11? I believe I am behind on updating my airport as well. Probably everything that could be updated. DEFINTELY security updates.

    Hi urboyruru and welcome to the forums!
    The following is a general guide to safe updating, so some of it may be redundant for you, but as we have the same model iMac I feel qualified to speak!
    I would install the 10.4.11 combo updater first, then all the others. Note: just do one update at a time.
    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
    And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    More information on using Software Updater here:
    http://support.apple.com/kb/HT1338
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • New Update: Does flash video work?

    Havent had a chance to download the new update but was wondering if it does anything to solve the flash video problem (being able to watch videos online that are in flash)?

    No flash support.
    Adobe is going to program a version after the SDK release in Feb.

  • Will you guys PLEASE fix the issues with the new update; it keeps crashing my ipad 2

    Guys, the new update is driving me crazy! I can't even delete and reinstall apps because it keeps crashing when I hit the install button. DO SOMETHING!!

    We here are not employees or representatives of Apple. We are all users like yourself.
    Two things that might help. Reset all your settings and reset the phone.  Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings  Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.
    You might also let us know the specific problems you have, what you've done to correct them and what, if any error messages you have received. With that info someone here might be able to help you.

  • Any New Updates for Lumia 800 after 7.8 ??

    Hello everyone !!!
    Any New Software Updates for Lumia 800 after the 7.8 ??

    Nokia or Microsoft has yet to announce anything so at the moment the answer is no.

  • Any news on Fuji x10 support?

    Any news or workarounds for Fuji x10 RAW images?
    Thanks!
    Steve

    Interesting. He evidently has access to beta versions that the rest of us don't.
    http://blogs.adobe.com/lightroomjournal/2011/11/lightroom-3-6-and-camera-raw-6-6-available -on-adobe-labsoe.html
    If Sean Reid is telling the truth, then the odds of x10 support being in the final 3.6 version just went up a bit.
    Hal

  • I can't add any new calendar or date in iCal (iPad, iOS5)

    I can't add any new calendar or date in iCal since running iOS5. The corresponding buttons doesn't appear on the interface. I have restore one time and it changes anything.
    Thanks for help.

    Assuming you activated iCloud, try going to Settings>iCloud and make sure Calendars and Contacts are set to ON.

  • The new update dose not support moving files

    In the new update when moving files to folders the program shuts down

    Hi,
    Sorry for the inconvinience caused due to move bug. We have fixed the issue and are waiting for apple to review/approve it.
    Thanks for your patience.
    Regards,
    Ankit
    Adobe Reader Team

  • Any new updates after version 20 for the n97?

    Hi
    Just wondering if any new firmware has been released for the n97 post v20?
    cheers

    I've heard that v.21 is back in development but thats all.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • Is there any way to view flash sites on Ipad?

    I was wondering of there is any third party application on Ipad which i can install to view sites wtitten in flash? I know that safari does not support but os there another browser to do the job?
    Thanks,
    Spiridon
    Nanos Fireworks

    At this point, Flash is not supported within a browser on iOS devices.

  • Any news on Closed Captioning support?

    A new software version makes me hopeful knowing that almost all other Apple products now support CC. But I didn't see anything specific on their websie about it. Anyone have any update on this?

    No updates or news or anything that I've seen. With the new rentals I might think about getting an Apple TV *IF* there were closed captions.
    <Edited by Moderator>

  • How do I take screen shots with the new update iOS 5 on my iPad and iPhone?

    When I try to take screen shots on both my iPad and iPhone they both come up with the screen to shut down the devices. I've updated both with iOS 5. Any clues on how to take a screen shot with iOS 5?

    As with the previous iOS versions.
    Press and hold the Home button and use the on/off or sleep/wake button as a camera shutter button for the screen shot.
    Or while pressing and holding the on/off or sleep/wake button before the slide to power of appears, use the Home button as a camera shutter button - this must be done before the slide to power off appears.

Maybe you are looking for

  • Issues with Deploying Struts application on Weblogic Server 10.3.3

    We are trying to deploy a web application on Weblogic 10.3 server domain. The configuration is we have 2 physical boxes with one box running an Admin Server and one managed Server and the other box running only a Managed server. Both these servers ar

  • Problem with Business Package / IAC

    Dear Gurus: We just installed one business package (the one for employee self service). I went to portal content, and navigate to the pages installed by this package. For example the one named "Address". It contains one iview named the same. I asume

  • CS3 file will not open in CS3 after editing in CS6?!?

    Pardon the exclamations but we're creative folks not techies. After editing a CS3 file in CS6 we are unable to open it in CS3. Looks like CS6 will only save back to CS4? So once edited in CS6 then I can no longer use CS3 to work with the files? Can a

  • Excise duty & VAT need to print  seperately in PO printing

    We are able to print Value of ED & VAT combinly but the client requires it seperated. Any solution pls.

  • Selection of 0CURTYPE in a copa datasource

    Hi everybody, I'm being asked to give a hand to a colleague of mine.... he has a problem with the copa datasource...Unfortunately i've always worked on extraction from modules sd and mm... and I don't know how copa exctraction works... I've found a l