Any new XML features from CS3 to CS4?

Does anyone know if there are XML-related features in ID CS4 that were not in CS3? Not counting IDML. Any details, or tips on resources would be much appreciated!
Thanks!

Actions are in the PS folder, hope you did not toss the CS3 folder.
From the actions pallet fly out menu select Load selections and navigate to the old PS folder / Presets / Actions or Photoshop Actions (depending on the version) and select the set you want to load.
Or drag them from the old folder to the new folder, they should show up at the bottom of the fly out menu.
This and the other presets are a good thing to backup, BTW !

Similar Messages

  • How do I transfer plugins/actions from CS3 to CS4?

    I am working on a newer computer for my wife. Her current computer is Windows XP Pro with Photoshop CS3, her new computer will be Vista Ultimate with CS4, both with default installation locations. I know she has alot of actions/presets/plugins she uses; my question is...
    How do I transfer all of her actions/plugins from CS3 to CS4? Is there a folder I can just copy/paste?
    Any information would be helpful. Thanks!

    For actions it depends how they are saved.
    The best thing is to save them in sets on the old computer in a folder of your choice. They can then be loaded from a copy of that folder on the new computer.
    Third party plug-ins should be installed again because not all will work in 64-bit and you may need to get updates.

  • Getting error after administrator who upgraded from CS3 to CS4

    Hi,
    We have had an administrator who upgraded from CS3 to CS4.
    However, any of our other users still using CS3 now get the
    following error message:
    “The website is being administered with a newer version
    of Contribute. For more information contact this website's
    administrator."
    Do you know any way around this issue?
    Thanks,
    Greg

    quote:
    Originally posted by:
    sdfsdf e3wwre4
    Just wondering if somebody here can clerify the following....
    If I upgrade contribute and then administer a contribute enabled
    website will users of CS3 still be able to edit the site or will
    the be forced to update as well?
    Hi,
    No they don't have to, at least I think so. If your
    administror go to the menubar: Contribute>Administer
    Websites> Choose the site you wish to set the settings for. In
    'Compatibility' choose 'Transition Mode' and klik OK. This should
    allow the other users to keep working in their version of
    Contribute.
    I say 'should'... Read my entry in the general discussion
    forum.
    (a not so happy) Ingrid

  • Migrate actions from CS3 to CS4

    Hi,
    I would like to migrate my actions from CS3 to CS4. The CS4 is a new install on a fresh Windows 7, from the CS3 settings I only have a backup of my disk before the new install. Of this backup I checked the "C:\Users\<username>\AppData\Roaming\Adobe\Adobe Photoshop CS3\Presets\Actions" folder but it is empty. In my CS3 I had many actions, sorted in different folders. The other presets (like for curves or the channel mixer) are there, so I am quite confident that my backup worked correctly.
    Am I missing something here and can I find the actions of CS3 somewhere else or are they gone for good?
    Thanks and regards, Robert

    Different folders as in different action sets in the Actions panel right? did you actually use the Save Actions command from the Actions panel menu? If you didn't save them then try copying this file: C:\Users\<username>\AppData\Roaming\Adobe\Adobe Photoshop CS3\Adobe Photoshop CS3 Settings\Actions Palette.psp to the same location but with CS4 instead of CS3 in the path

  • Copy favorites from CS3 to CS4

    Is there a way to copy favorites, keywords, other settings from CS3 to CS4?
    Thanks,

    Hi Mogur203,
    Sorry, but there is no way to copy your CS3 Favorites over to CS4. However you are able to copy your keywords over if they did not get imported during your first launch.
    1. Launch CS3, Click on the flyout menu in the keyword panel
    2. Select export, Save the text file
    3. Launch CS4, Click on the flyout menu in the keyword panel
    4. Select import, select the text file that you saved from CS3
    This should complete the import of all the keywords from CS3 to CS4.
    Please let me know what other settings you are referring to and I will let you know if you can copy them over or not. Please let me know if you have any other question

  • Help with creating a new XML file from an existing DOM tree!!

    i want to create a new XML file from an existing DOM tree
    i used this code to create a new document:
    static public Document createDocument(String fileName) throws ParserConfigurationException//,IOException,SAXException
              try {
                   DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                   factory.setIgnoringComments(true);
                   factory.setIgnoringElementContentWhitespace(true);
                   factory.setValidating(true);
                   DocumentBuilder builder =factory.newDocumentBuilder();
                   return builder.newDocument();
    //          handle exception creating DocumentBuilder
              catch ( ParserConfigurationException parserError ) {
                        throw new ParserConfigurationException();
              }then i used this code to transform the DOM :
    public void exportDocument(Document document) {
              try {
                   Source xmlSource = new DOMSource( document );
                   Result result = new StreamResult( System.out );
                   TransformerFactory transformerFactory =
                        TransformerFactory.newInstance();
                   Transformer transformer =transformerFactory.newTransformer();
                   transformer.setOutputProperty( "indent", "yes" );
                   transformer.transform( xmlSource, result );
           //then catching the exceptions
    But the file was not created and i didn't find where can i specify the DTD that the XML file should use and where can i enter the name of the XML file itself
    Another questoin can i write a DTD file dynamically during the execution of the program??

    Cross-post: http://forum.java.sun.com/thread.jspa?threadID=784467&messageID=4459240#4459240

  • How do i get new xml back from edited DOM

    i parsed XML to get the DOM and then i edited the dom now how do i get the new XML back from the edited DOM ?????????
    thanx
    sam

    It's not nearly as straight-forward as it should be, but check out the javax.xml.transform package (assuming you're using JDK 1.4).
    I think Xerces has simpler methods for doing this, but I wrote my own serializer class ages ago, and tend to use that.
    RObin

  • Any new discoveries on Photoshop CS3 files opening slow in Windows 7?

    Any new discoveries on Photoshop CS3 files opening slow in Windows 7?

    Extend Dave's advice to also include looking for any network shares that may be mapped (e.g., to a drive letter) but not presently online.
    -Noel

  • Transferring PDF, Print and Preferences from CS3 to CS4

    I have just upgraded from CS3 to CS4 (all in Windows) and wonder if it is possible to transfer the preferences, export-to-PDF and print settings in CS3 to CS4. Just askin.
    potterjazz

    What happens when you try to install the plugins to CS4?

  • Exporting site info from CS3 to CS4

    How do I export my "remote info" under "manage sites" from CS3 to CS4? I have about 30 sites under "manage sites" and would hate to have to dig up all the passwords after the upgrade. I used the "export" button in CS3, but it didn't bring in the remote info.

    1.  In CS3, open Site Manager
    2.  Select the sites you want to Export
    3.  Click Export and select a KNOWN location into which to write the *.ste files
    4.  Open CS4.
    5.  Open Site Manager
    6.  Click IMPORT, browse to and select the site files you just exported and click OK.
    Such fundamental questions as this are always answered in DW's F1 Help.  You'd have been done an hour ago if you had looked there.

  • Taking Site List from CS3 to CS4

    Hi,
    I want to upgrade from CS3 to CS4 but am a little nervous that I will lose all over my sites in my site list.
    Is there a way to carry my sites accross to CS4?
    Thanks

    Click on the first site listed, Shift+Click on the last site listed (so they're all highlighted) then Export.
    Individual .ste files will be created for each defined site.

  • Need help with XML Compatibility between CS3 and CS4

    I'm not a Dreamweaver guru but I am hoping someone will recognize my issue and be able to provide meaningful feedback.
    Background:
    A developer buddy and I are working together to create a new home page for an online retailer that utilizes flash banners.  We're using XML to update the content of the banners.  My buddy is creating the XML file and sending it to me to populate with content (i.e. descriptions, images, image paths, etc.).  He is creating the XML file in CS3 and I am editing in CS4.  Here's the issue:  Whenever he uploads the populated XML file to the server the banners are displayed correctly.  If I take the same file and upload it without editing, it works great.  However, if I open the file, edit and resave before uploading to the web server, the the banners all have extra spaces between each line of content - almost as if it were double spaced.  If you look at the code, the code looks fine.  In fact, the code looks exactly like it did when my buddy sent the file to me.  I believe we have isolated the problem to something weird with my installation of DW.  I have downloaded and installed any and all updates.  Oh yeah he's using a MAC version and I am using the PC version of DW.
    Has anyone seen anything like this before???
    Help...

    Thank you for your response.
    The code is listed below and to tell you the truth the following code is both good and bad.  As I mentioned before, if my buddy sends me this xml file and I upload it to the server, it works fine.  If I open the file and immediately save it without making any changes then upload it, I experience the previously described promblem.  It's very strange.  The code in both files is identical.
    To get a clearer picture of what I am describing, go to http://www.everythingministry.com/beta3.htm.  The book descriptions appear correctly under the "New and Recommended" tab.  However, whenever I edit any one of the six xml files that control the content for each of these tabs it ends up looking like what you currently see under the "New Music" tab.  I have actually tried to update from 2 different machines running DW CS4.
    Below are the xml files for the two tabs I referenced in the paragraph above:
    ts_new.xml
    <items>
      <config
      Milliseconds="5000"
      Distance="3"
      BorderColor="0xffffff"
      TargetLink="_top"
      TextYPosition="200"
      MaxDisplayContent="6"
      ContentWidth="148"
      ContentHeight="300"
      TransitionSpeed="0.8"
      TransitionType="0"
      ShowMouseOver="0"
      ShowBorder="1"
      ShowGlass="1"
      />
       <content>
        <image>images/crazylove.jpg</image>
        <description><![CDATA[Crazy Love
    by Chan Francis
    Price: $11.99
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/crazylove.aspx</link>
      </content>
    <content>
        <image>images/underthesheets.jpg</image>
        <description><![CDATA[Under the Sheets
    by Dr. Kevin Leman
    Price: $9.99
    You Save: 29 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/underthesheetsthesecretstohotsexinyourmarriage.aspx</link>
      </content>
    <content>
        <image>images/outliveyourlife.jpg</image>
        <description><![CDATA[Outlive Your Life
    by Max Lucado
    Price: $19.99
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/outliveyourlifebymaxlucadohardcover.aspx</link>
      </content>
    <content>
        <image>images/lovedare.jpg</image>
        <description><![CDATA[Love Dare Day By Day
    Wedding Edition
    Price: $16.79
    You Save: 27 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/lovedaredaybyday-weddingedition.aspx</link>
      </content>
         <content>
        <image>images/lifeinterrupted.jpg</image>
        <description><![CDATA[Life Interrupted
    by Priscilla Shirer
    Price: $11.99
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/lifeinterruptednavigatingtheunexpected.aspx</link>
      </content>
    <content>
        <image>images/faithfulfasting.jpg</image>
        <description><![CDATA[Faithful Fasting
    by Errica L. Williams
    Price: $8.79
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/faithfulfasting.aspx</link>
      </content>
      <content>
        <image>images/whencouples.jpg</image>
        <description><![CDATA[When Couples Walk Together
    Price: $9.59
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/whencoupleswalktogetherjan2011-paperback.aspx</link>
      </content>
    </items>
    ts_music.xml
    <items>
      <config
      Milliseconds="5000"
      Distance="3"
      BorderColor="0xffffff"
      TargetLink="_top"
      TextYPosition="200"
      MaxDisplayContent="6"
      ContentWidth="148"
      ContentHeight="300"
      TransitionSpeed="0.8"
      TransitionType="0"
      ShowMouseOver="0"
      ShowBorder="1"
      ShowGlass="1"
      />
       <content>
        <image>images/untilthewholeworldhearscd.jpg</image>
        <description><![CDATA[Until the Whole
    World Hears
    Price: $12.76
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/untilthewholeworldhearscd.aspx</link>
      </content>
    <content>
        <image>images/move.jpg</image>
        <description><![CDATA[Move
    by Thirda Day
    Price: $11.19
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/move.aspx</link>
      </content>
    <content>
        <image>images/andifourgodisforus.jpg</image>
        <description><![CDATA[And If Our God
    Is For Us
    Price: $11.19
    You Save: 20 %
    <img src="images/addtocart.jpg" width="146" height="17">]]></description>
        <link>http://www.everythingministry.com/andifourgodisforuscd.aspx</link>
      </content>
    </items>

  • Why should my clients who use contribute 3 suffer because I upgrade from cs3 to cs4?

    I developed a template that can be used by a number of chapters of a charitable organization. The chapters who subscribe to my template all purchased contribute cs3 and it works well for them.  I may have made the mistake of buying the CS4 upgrade, as any new keys that I send using Dreamweaver cs4 to new users can not be used by users with contribute cs3. Most of these chapter already using contribute 3, do not have the funds to upgrade to contribute 4.
    The code of my template has not changed, only the tool that I use to administer it has, why should they have to upgrade because I have?
    This also makes it so that older users of my template will not be able to beneifit from the new version of the template. Do I have to reinstall CS3 and keep using CS3 to administer their network or do I have to force them to purchase the upgrade because I chose to upgrade to Dreamweaver CS4? There had to be a way I can send a contribute 3 user a new key because the user has changed names without forcing them to upgrade. Otherwise I have to develop my template so that changes can be made by users using other wisiwig programs.

    Thanks for that.
    Yes I had the notion I may have been duped into buying a counterfeit CS3. I got it from Amazon and though Adobe seem to think that the serial number is OK they could not trace it on their system. However, if ths is a fake copy, what can Adobe do to help? How did they help you? I can't see them giving me a free CS3 in exchange - so I'm stuck!
    Kind regards
    I had exactly the same problem and I am sorry to say that you may have a counterfeit version of CS3. Contact Adobe they helped me to sort out the problem.
    >

  • Annoying window maximize change from cs3 to cs4/5

    When I hit the maximize button on an image window, it goes to full screen and I lose my top menu bar and side tool bar. Why the heck did they do this..who the hell wants this - why change the behaviour of the tab key?!! Its so annoying! Is there a way to get it back how it was? I want it to maximie to the available space inside the PS window, not the entire screen. I dont want a windowed or tabbed view in the available space.
    I've tried:
    CTRL-0
    double clicking the hand tool
    hitting "f" then "Tab"
    ..and they kind of get me there none of these ways are perfect. I'm a user since Version BETA, and this is hard to get used to. HELP! This is almost as annoying when they changed the key mappings and didnt provide a way to change it back. I sitll cant remembwe what key brush is.

    Thanks for the replies. I have used the arrange windows feature. So lets say I was compiling elements from two psd files.. I'd tile them, or likely just have one next to each other. Then when I want to blow one up to maximize the available window space, I would normally just hit the maximize button on the window and start working, but when I do that now, I lose the menu bar and tool bar. I do have two 24" monitors and keep the layers and other sub tools and properties windows off to the right window. But I need the main tool bar on the left side - like its been for the last 14 years. I also need the menu bar.
    So this is where it gets annoying. Why isn’t there an option to just maximize the window to the available space like it used to be? I either have to grab the window and drag it up to make it a tab.. or hit maximize button, hit F, then hit Tab, which sort of gets me there, but then I'm in a weird mode I have to back out of later when I want to see that other window in the background. They've added more clicks and user effort for what I can see as little gain. I'm changing between these modes all the time!
    It’s cool they use tabs because well, hey Google and Mozilla introduced it so why not, but in the context of web browsing tabs may make sense, but for Photoshop its just annoying. I shouldn’t have to modify my deeply ingrained workflow to suit the needs of a new program feature. I hate when Adobe does this!! !'m considering uninstalling and going back to cs3.

  • Convert. Files from CS3 to CS4

    When I open files created in CS3 within CS4 all the text and graphics are gone. I'm left with grid lines. Any ideas?

    Thanks Peter. The uninstall & reinstall did not help. Based on your suggestion I have also tried replacing preferences (Ctrl+Shift+Alt) when launching InDesign CS4. Did not help. I've found I can't even create a new document without getting "InDesign.exe has encountered a problem and needs to close" and the icons for my tools panel are not shown - all I see are the tool tips when hovering. Adobe Tech Support pointed me to KB404723 for further trouble shooting.

Maybe you are looking for