Any news on DVD-A drivers for Windows XP x

Love the 64 bit drivers for my Audigy 2 ZS Platinum card. But, my DVD-A's won't play because of lack of drivers. Is this being worked on?
Thanks.

WayneW wrote:
Love the 64 bit drivers for my Audigy 2 ZS Platinum card. But, my DVD-A's won't play because of lack of drivers. Is this being worked on?Thanks.
Isn't it already stated at that the 64bit driver have no support for dvd-a? Maybe that's a limitation on the card on 64bit os.

Similar Messages

DVD-RW drivers for Windows XP64

I am going to buy DVD - RW - TEAC DV-W512G or ASUS DRW-1604P. Please advise if I need special driver for these DVD ROMs when I use Windows XP64 bit edition? In the web sites I can see drivers for Win XP 32 bits only. If so, where can I download them.

How's your money supply? And what are you going to use the array for?
If (a) money is not a limiting factor and/or (b) you want the best raid performance for e.g. A/V editing then there's no contest - there are no other SATA drives that come anywhere near the 74GB WD Raptors. They are blindingly fast (beat the pants off same speed SCSI drives), quiet, reliable. The 36GB's are similar but not quite so quiet since the bearing mechanism is a bit different.
Other than that there are some new Hitachis that have had great reviews especially because they are the biggest you can get (400GB I think), support TCQ or NCQ whatever it is and are fast, reliable & quiet - all of this I've read and not seen myself. Based on my research these would be my second choice.
Next in the pecking order for me is any other decent brand name - WD Caviar, Seagate, Maxtor, etc. You'll read bad reports about Maxtors or others but as far as I'm concerned it's all nonsense since any of these drives can fail (I've had bad Seagates and never had bad Maxtors but others have reported the opposite) and it's often difficult to separate out the blame for failures between the drives & the chipsets. The best protection is knowing you have a good supplier who will not give you grief in the unlikely event you need to RMA them.
As for the floppy, this thread should get you going.
Good luck - I'm building mine this wekend as well.

Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng

Can any one help me with Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng? I'll be very grateful for any answers
This question was solved.
View Solution.

Hi:
You should be able to use the drivers and software from this model on yours...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6936...
When you go to install the graphics you have to install these drivers in this order and reboot after each installation.
1. Intel chipset installation utility.
2. Intel HD graphics driver.
3. Nvidia HD graphics driver.

How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?

Hello everyone,
I am facing a problem with bootcamp on my Macbook pro 15" (Mid 2010, running Mos OS 10.6.6).
I have successfully installed windows 7 via Bootcamp, but I lost the Drivers DVD furnished by Apple.
I tried to download these using Bootcamp (v3.0.4), but bootcamp won't let me save it, i get this error :
"the windows support software could not be saved to the selected folder"
An Apple support article has been made for this problem ( http://support.apple.com/kb/TS3648 ), but it doesn't solve the problem in my case because I lost the furnished DVD.
So here I am, struck on this drivers issue...
So, my question is :
How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?
Thank you for your help !
Regards

Aw, and I forgot, being in Thailand, they do not sell the installation DVD.

New drivers for windows 7

When there will be official drivers for windows 7?

I fully appreciate this is a user discussion forum.
BUT, the announcement about the release of the Win 7 Beta drivers is in a post on this forum, dated May 2010. I seem to think that the "first" release was actually earlier than that.
It is now March 2011 and still the "final release" is nowhere to be seen. I've run the beta for the 0404 (not USB) since it was released; it appears slightly more stable than the previous Vista driver, but quite severe distortion can occur without warning, often to be "corrected" only by stopping and restarting playback of the wanted audio.
It would certainly be appreciated by those of us who run Win 7 and an EMU card to receive some kind of update as to what is actually happening, not merely the stock answer that "Notices about updates will be posted....".

Drivers for Windows Vista 64-bit on Satellite L300-1AM

When I can get drivers for Windows Vista 64-bit? Or I need to intall 32-bit drivers on my 64-bit Vista operating system?
Please links ;)

[Toshiba - Download Drivers|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
In the Drivers Search Page (the link above) select these filters:
_Product type:_ +Notebook+
_Family:_ +Satellite+
_Product Series:_ +Satellite A Series+ (don't try the L series if you want to find anything useful)
_Operating System:_ +Windows Vista 64 Bit+
_Country:_ +World Wide+ (you have to select this in order to get rid of those multiple country options available for the modem)
_Language:_ +English+ (obviously)
Don't modify any other filter. The results will be about 100 (maybe more, but the site is set to show up to 100 results).
Advices:
1. Download the latest versions only (there's no point in downloading multiple versions of the same driver, yet they will be shown in the search results area)
2. Download what's specific to your laptop only (network - RealTek, both wired and wireless; chipset and graphics - Intel; modem - Toshiba; webcam - Chicony; there's no point in downloading anything from otehr vendors - except maybe the touchpad, but Windows can handle it properly without aditional drivers)
3. Don't download any BIOS or Firmware file; they might not be for your notebook, and installing the wrong ones is a sure path to screwing up your notebook (and losing the warranty); if you need them upgraded, go to the download page for your specific model, Windows XP or Windows Vista 32 Bit drivers (since they are OS independent anyway)
Toshiba utilities (DVD Player, ConfigFree, etc.) should be OK too (again, download the latest version only).
BTW, I own 2 Toshiba notebooks (L300-1AM and L300-1AN; quite similar, the differences are in HDD and CPU only) and I had the same problem: no 64-bit drivers (and the same "support"). Quite strange the idea that Toshiba is testing these 64-bit drivers before releasing them (according to a previous post), since the same drivers, for the very same chipsets - but installed on other models - are available. Windows Vista 64-bit is out on the market for nearly 2 years now, the production of these models has already been stopped (and I assume they have not been produced during one night only :) ), yet they had no time to test the drivers... High-class support from Toshiba!

Are there any new All-in-one printers for sale that use the CLI-221 cartridges?

We have a MX870 Printer that needs to be replaced but new cartridges were just purchased from Canon. Are there any new All-in-one printers for sale that use the CLI-221 cartridges?
Thanks,
Margaret

The MX922 (known as the MX926 in Australia) is supported by 10.10 and Windows 7. Whatever site you were looking at may not have updated their details. Here is a link from the Canon Australia web site showing the drivers and applications for this model for 10.10.

Audigy 2 sound card drivers for windows 7

hello,
Audigy 2 sound card drivers for windows 7.
I bought the card from a friend no longer used. funtion perfectly on Win XP, but I have a system equipped to win 7 / 32 bit. unable to install a driver to work, the soundcard is recognized, but the properties says "This device can not start. (Code 10)". All software is installed. But I think the driver is the problem, I downloaded the package from the site, they also have a software autoupdate, but everything ends with error.
SB0240 Audigy2
Some help pls.

back,
my operating sistem seems to be the problem.
i instaled a new clean win 7/64 and the driver is ok.
now, my currently operating sistem works verry fine and i don't want to format.
i have many software programs instaled in a period time and it took me some time to instaled again.
what sollution is in this moment?
my sistem (win ultimate 7/32 actualy) is daily updated.
is there any possibility to remove all audio drivers, including montherboard and audigy and reinstal all?
thank you.

NB500-10F - Drivers for Windows XP

Dear friends
I have Toshiba NB500-10F (PLL50E) and I install Windows XP on it but I can't find the drivers for the LAN,WLAN and VGA that work with XP.
Can any one help me?

Hi mostafaalsaddy,
You will not find any drivers for Windows XP on NB500 because this old Windows version is not supported. Everything what you can download on Toshiba website are drivers for Windows 7 but Windows XP is not supported.
If you cant believe it check the page yourself:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Maybe you can find on external pages some 3rd party drivers but there is no official support for XP. You should install new and better Windows 7 on this great netbook ;)

AirPort Extreme Drivers for Windows XP???

This may be a very silly question, but I've got a new Mac Pro that will be arriving in two days and I couldn't help but wonder, "How will the AirPort Extreme WiFi card be able to connect to the Internet when I'm running Windows XP from a separate hard drive using Boot Camp?
The Internet connection in my apartment is wireless only (coming from a router upstairs in my landlord's part of the house). Are there any AirPort Extreme drivers for Windows XP? If so, I have not been able to find anything online.
Any suggestions on how to do this?
Thanks,
~Greg

Thanks for the info Stefan,
However, I don't think that the Macintosh driver CD will do me any good in this case because I am not planning on running the 32 bit version of Windows XP. I will be installing XP64 tomorrow once my CD arrives in the mail.
I've heard of quite a few people who are currently running XP64 on their Mac Pro's, but I'm also pretty sure that the driver CD created by Boot Camp will only work in Windows XP 32-bit.
If ANYONE knows of a work around for installing macintosh drivers for my super drive and airport extreme, PLEASE let me know, because I will most certainly need to be able to use my wireless card and keyboard (especially for the CD tray)
Thanks,
Greg

Cannot get Boot Camp drivers (for Windows XP) installed

I've partitioned my Time Machine HD for the 32GB/FAT format of Windows XP/Home Edition w/SP2. The installation of Windows proceeded OK. However, after installing Windows, ejecting the W-Install disc, and inserting my MAC OS X Leopard disc, the "setup.exe" file does not open. If I start up in Windows, I cannot open the Opt. Disc drawer since the BC drivers are not installed; if I insert the OS X disc in the drawer, then restart in Windows, the "setup.exe." file does not open.
Where do I go from here to install the Boot Camp drivers for Windows? These drivers are needed for 'normal' Windows operation, and are required in order to install the Boot Camp update. Any suggestions would be appreciated.

Hi David,
while you are in Windows and have the Leopard DVD inserted, can you access the content of it using the Windows Explorer ?
or maybe this hint on MacOSXHints can help you access the Windows Content of your Leopard DVD while in OSX http://www.macosxhints.com/article.php?story=20080708145453136
If so, you can try to copy the Windows Content onto a USB Memory Stick and use it to install the drivers.
Good Luck
Stefan

Re: HP 15-d053sr drivers for Windows 7 x64 not installed

Hello!
I have the same problem!!!
Notebook HP 15-d053sr, Product No. F7R72EA#ACB, Serial No. [edited by Moderator], Bios Version F.11
On clean install Windows 7 x64, Can't install all Chipsets, USB 3.0 and Video drivers! Error message: "This computer does not meet the minimum requirements for installing the software"
On clean install Windows 8.1 x64 Can't install "IMEI" (sp64344) driver and maybe more!
HP Support Assistant find only 4 drivers (Atheros Bluetooth, Wireless LAN, Synaptics TouchPad and Realtek Audio drivers)...
Need working, supported, compatible drivers for Windows 7 x64!
Please HELP!!!

Hi @Ainars_LV ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

My hp M6 k015dx drivers for windows 10

My hp M6 k015dx all drivers for windows 10....

VvEaKy_VvaQaR wrote:
My hp M6 k015dx all drivers for windows 10....
Hi,
Too early to ask, they may come one day. HP people are testing new Windows 10 like you and me and they will anounce a list of machines which support Windows 10, similar to Windows 7, 8 and 8.1 (note: not all machines will support Windows 10).
Please use Windows 10 updates, it's very good on my machine, only 1 driver missing and I won't bother to find it now because it MAY come at a later date (or it may not come at all. That's life).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP DesignJet 9300 drivers for Windows 8

As it seems, there haven't been released any drivers for Windows 7, so I am wondering, if anyone knows, is it to expect that they will be developed for Windows 8.
It is preety anoying to have such a good and reliable A3 printer and still depend on Windows XP OS.
Thank you.

Hi,
The good chance is NO, no support for Windows 7 will be translated to no support on Windows 8. It is not on the following list:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N1754
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem

I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!

Suhail wrote:
I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!Which PSC 1400 are you using? There a few different models: HP PSC 1402 All-in-One PrinterHP PSC 1410v All-in-One PrinterHP PSC 1410xi All-in-One PrinterHP PSC 1417 All-in-One PrinterLet me know which one so I can get you the proper download.Thanks,Sean

Any news on DVD-A drivers for Windows XP x

Similar Messages

Maybe you are looking for