Any OMNIS subscribers had success with iWeb '08?

I followed the instructions from iWeb and spoke to OMNIS and got instructions from them. I've successfully changed the DN to CNAME web.mac.com. I wasn't sure what information to put in the "Content" window. I've tried a few different things. I made these switches three days ago and still when I type in my address it takes me to the OMNIS page. Have I missed something? Anyone else have the same problem? Help. Thanks

Glad to hear that it worked for you. But I am really starting to wonder where I went wrong then, because I did not use third-party anything with iWeb, and I can't update my '06 domain file. iWeb just freezes, shows as "Not responding" and in red in the Force Quit window. I don't believe there's any point in trying to wait that out.
And not only that, but when starting over with a fresh domain file, iWeb '08 crashes or freezes all the time too. I'm a big Apple fan, and I haven't lost anything important because I backed it all up and have a second Mac to rely on, but seriously, this is bad. It's just bad. I can't come up with any excuses for this one (or the stripped-down new iMovie, but I digress). I have a straightforward site -- based on "modern" template -- I don't understand why the new version of iWeb can't read it. I understand even less why iWeb '08 would be crashing with a brand new domain file.
My site is here: http://web.mac.com/mousie/iWeb/Site/Home.html
If anyone can see any reason why I may be having these problems, please let me know. I've tried all the tricks to "get it to work" that I could find on this forum. Thanks.

Similar Messages

Any one here had success with sync of iPad to their Aluminum?

Have seen issues with USB external drives not getting enough power via the PB USB port - what about the iPad?
Also the iPad needs you to have 10.5.8 - can any one comment on the PB speed with 10.5.8 compared to 10.4?

"As for the iPad; I can only speculate, but an iPad is really just a large iPod touch, so I see no reason why it wouldn't sync with a G4 PB."
The Pad has higher voltage requirements than the Pod - hence they use different power adapters (although users report the Pad power works with the Pod but not vice versa).
Thanks for the OS performance input!

Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

For $149 they will do an out-of-warranty replacement.

Complete Success with iWeb 08

Well after reading all the Horror stories here I was mucho frightened! So I of course backed up my Domain document although I knew I have a mirror Cloned using CCC thats in my Tower. The 'conversion' completed without a hitch till after the progress bar was finished. Then it Crashed and asked to reopen. When I reopened it Crashed again, so the next effort I hit close to let the app properly cycle and button itself up.
Next attempt it did reopen and stayed opened. So seeing all those 'Red" folders (6 photo pages) I hit the Publish Button on the bottom of the screen. It proceeded to do its thing, but I noticed that now there was a progress bar instead of the little Pie indicator to the right of the Site name. I simply waited.. Then the Pie progress indicator did Indeed appear, and I saw on my Net Monitor app, that the site was now uploading. It seemed to be finished but the Circle of the indicator was still appearing - So I WAITED some more and after a while the empty Circle disappeared and I got a Dialog Box that told me it was complete!
So there were 2 instances that I thought perhaps the import/conversion process was Done when in fact IT WAS NOT. I could have probably Tanked my entire site had I not waited patiently. So buyer Beware. Allow the procedures to COMPLETE, as I bet many will not, and end up with an incomplete conversion, Hence not working. I thank God I had the good sense or fortune to wait and was relieved to get a Dialog Box that told me it was completed and asked me If I wanted to close or Visit my site. I copied the web address from that Dialog Box and closed the iWeb app, opened Safari pasted the address and my full site was there. ( It opened with placeholders but in a few seconds the pictures all populated) Whew.. YMMV moral, be patient and wait a few minutes when you think its done, it may Not Be.
http://web.mac.com/eugenefields
Message was edited by: mactechconsulting

Glad to hear that it worked for you. But I am really starting to wonder where I went wrong then, because I did not use third-party anything with iWeb, and I can't update my '06 domain file. iWeb just freezes, shows as "Not responding" and in red in the Force Quit window. I don't believe there's any point in trying to wait that out.
And not only that, but when starting over with a fresh domain file, iWeb '08 crashes or freezes all the time too. I'm a big Apple fan, and I haven't lost anything important because I backed it all up and have a second Mac to rely on, but seriously, this is bad. It's just bad. I can't come up with any excuses for this one (or the stripped-down new iMovie, but I digress). I have a straightforward site -- based on "modern" template -- I don't understand why the new version of iWeb can't read it. I understand even less why iWeb '08 would be crashing with a brand new domain file.
My site is here: http://web.mac.com/mousie/iWeb/Site/Home.html
If anyone can see any reason why I may be having these problems, please let me know. I've tried all the tricks to "get it to work" that I could find on this forum. Thanks.

Has anyone had had success with Time Machine and Airport Express 6th gen?

For the last six months I have attempted to use the Time Machine product to provide first level backup for my two MacBook Airs and iMac. Tryed a number of powered USB drives, tryed all of the current 10.8, 10.9 OSX software. The Time Machine product seems to work for about a month to six weeks and then fails with message about the file integrity or access problems. In all cases I can acess files on the drive and the only application that struugles with the AE usb drive is Time Machine.
You would think that if it works for a month it should work for a year?
I have purchased Carbon Copy Cloner and it seems to function without a problem and I think that I am probably better off with a once a day clone than a Time Machine with data integrity problems.
Has anyone had long term success with Time Machine and AE sixth gen?

You are connecting a USB hard disk to the new 802.11ac AirPort Extreme, not an Express, correct? If so, it works fine with both bus powered and self-powered drive enclosures, and I have no immediate explanation for what's going on.
You would think that if it works for a month it should work for a year?
Yes, besides the passage of time the only thing that is changing is the amount of available space on the backup volume, which could be a factor. Are you using separate drives for each Mac, or are they all being backed up to the same drive? If it's only one drive, is it partitioned or are they all sharing a single partition?
Are you sharing backup volumes with other, non-Time Machine files? That shouldn't cause the problem, but it's not a good idea.
What errors are being logged in system.log? Filter for backupd to find all Time-Machine related entries.

Has anyone had success with importing AVCHD Surround? Any Camera?

The title says it all.
Please give some details and thanks.
Barry

How to try that ? I am using Sony HDR-CX560V

Power Mac G4 - Have you had success with a SATA Drive?

I am replacing a bad SATA drive- have any of you used a SATA drive and had a good experience with it?
the Seagate 1TB I'm replacing is less than a year old. I only want to do this once.
thanks!

Hi-
I've been using WD SATA drives for over 3 years in my G4's, using Firmtek Seritek PCI controllers.
No issues at all.
I have several WD6400AAKS drives, which are very fast and very reasonably priced.
The WD Black drives are excellent as well, with the 2 I have providing reliable eSATA transfer for a couple years.
Performance is shown Here.

Has anyone had success with the VMWare adapter in 5.3.1?

We are trying to use the VMWare adapter to control the powerstate of our VMs.
Issues we are having specific to the adapter:
1. Tried passing a group variable in the Virtual Machines dropdown on the VMWare tab. The job launched, but didn't do anything, so we cancelled it.
2. We then tried to run a shutdown job on one of the VMs, but received the error: "Unable to launch task, because another task is already running on this VM "
3. The only way to get the job to run was to stop and start the adapter connection, which won't be possible in Prod.
4. We were able to run the shutdown job, and the VM shutdown, but the job stayed active until our job event to cancel after max runtime triggered.
5. We then tried running our Power Off job with the "skip if already in expected power state" flag set. The job ran anyway and completed abnormal. We are wanting to run this second step as we have seen instances where gracefully shutting down a VM doesn't work.
Are these issues that other folks have experienced?
Michelle

I worked with Cisco/Tidal to investigate the issues. We were able to "resync" Tidal and the ESX server by making sure no VM jobs were running in Tidal and disabling the connection. We waited 20 minutes and then enabled the connection. We waited until the connection went green and requested the powerstate and Tidal reflected the same state as VCenter. We are not receiving the 'task running' message any longer.
Michelle

Has anyone had success with Messaging Server 5.2 under Windows 2000 Server?

Just to be up front - we MUST use Windows 2000 - they're not giving me a choice to move to Solaris or Sun Hardware. Linux isn't even a choice, nor is WinNT. (I know, it's annoying).
I've managed to get Directory Server 5.1 to run under windows 2000 without active directory installed. I found that I needed to modify the ims_dssetup.pl script that comes with the Messaging Server 5.2 to reference the full path to my ldapsearch and ldapmodify executables. Apparently, this is a win2k specific problem, and is not necessary on WinNT. This made ims_dssetup.pl work and the install of Messaging Server 5.2 work on a windows 2000 machine.
However, at reboot, the job controller and dispatcher do not automatically start. When I try to start the services manually, I get "Error 1067: The Service terminiated unexpectedly".
Any ideas? I'm desperate here - they're gonna make us use exchange if I can't get >>something<< working. Even a 4.x version of messaging server will do.
Thanks

Well, I do understand that.
However, I've installed iMS 5.2 on win2k several times (I admit, w2k pro, not server), and i've never installed AD.
If you can get it installed and working for your default domain, but not for other domains, then most likely it has nothign to do with AD or AD domains. iMS idea of domains is very different from AD's idea of domains. We need to be very clear about such.
for iMS, you have to create additional domains through Delegated Admin, as either "Hosted Domains" or as "Vanity Domains". We do not suggest using "Vanity Domains", and support for such is deprecated.
Once you have created "Hosted Domains" through Delegated Admin, you can add users to those domains, and they should work, just fine.

Anyone else had success with Kodak 5100 printing from Time Capsule?

So I recently bought a Time Capsule and until now have been happily printing from USB port on PC and now on Mac.
We were going to buy a wireless printer but found out that the Time Capsule supports that capability by connecting a printer to the USB on the Time Capsule.
So, set it all up, connected my Kodak 5100 and it appears to see it and lists the printer in the print utility on my Mac as location "Time Capsule".
Printer is on, paper in, ink levels ok.... print a test page and my Mac thinks it's printing but the Kodak 5100 Easyshare (!!) is doing nothing!
Having searched the blogs for a while, and mindful that the Kodak 5100 is a couple of years old now, I eventually found a solution that appears to work!!
You can download an older software for the 5100 here http://www.userdrivers.com/Printer/Kodak-All-in-One-Printer-Software-3-5-for-Mac -OS-X/download/
I have to thank someone else for suggesting this back in 2009 on another post on this forum but I can't find the post so thank you whomever it is, this still works! When you set up the driver, you need to select that you are connecting to the printer through another Mac - I think the only other option I had was to select USB connection. Once you are in, you'll notice that the software is not as user friendly as the latest versions but if you can print wirelessly from your Mac, then I'd like to think you won't care about the UI of the printer software!
I've only just done this and tested with a colour excel from MS Excel for Mac so will let you know if anything else doesn't work!

I've tried using an ethernet connection. It does work faster and I seem to get more files over, but it STILL eventually hangs. I've given up with Time Capsule and now backup to a Lacie 1Tb disk. It would nice to know what is going wrong you Apple guys!

TS2690 Has anyone had success with this in a domain environment?

I work for a school system, windows 7 64bit machines and there seems to be no fix. A reimage of the machine only fixes it for a short time.

I worked with Cisco/Tidal to investigate the issues. We were able to "resync" Tidal and the ESX server by making sure no VM jobs were running in Tidal and disabling the connection. We waited 20 minutes and then enabled the connection. We waited until the connection went green and requested the powerstate and Tidal reflected the same state as VCenter. We are not receiving the 'task running' message any longer.
Michelle

Have any of you had trouble with calls since updating to iOS 4.3.3?

Hi there everyone,
I recently updated my iPhone 4 (from ATT) to iOS 4.3.3 and suddenly I am having trouble making and receiving calls--I am not receiving a great majority of my calls and apparently it goes straight to voicemail. When I try to make a phone call, there is terrible reception and the call eventually drops --but the screen continues as if I am still talking to the person. I know it really isnt a problem with the network becuase a) I have full bars whereever I go, and b) Ive been using this phone for the past 9 months in the same area with no problem!!
Are any of you having this problem, and if so what is your remedy (if you have found one). Should I just take it to the apple store and see what they have to say?
Thanks!

Did you get this resolved? I am having the same problem.

Anybody Had Success with Hype Tape-to-MP3 converter and Mac Mini?

I bought this Hype thing to upload all my cassettes to my Mac Mini, and be able to burn CDs. Downloaded the Mac App for it, but haven't been able to make sense of the directions. Many complicated things on the window when I open it. I do what the booklet says, but get nothing. Anyone else have one, with success? Please let me know? Thanks.

Sorry.
I bought it many years ago. But here's where I bought it and this looks exactly like what I have.
http://www.martelelectronics.com/91.html
It's a Martel HGM-1 High Gain Mic.

Anyone had success with default install of 8.1 on brand new rmbp?

Im about to try and install a full version, non upgrade, non OEM , of windows 8.1 Pro.
I have a brand new 15 " rmbp with dedivated NVIDIA gfx card.
It seesm everyone is having issues with this and there are multiple non standard ways of installalliong windows 8.1.
Has anyone been able to install it in teh usual manner suggested by Apple using boot camp?
Im not sure I want to do a work around and am wondering if I should wait until there is an updated version of boot camp. I do need to use win 8 pretty bad for wortk
cheers

Solution posted
https://discussions.apple.com/message/23545484#23545484

Have you had success with offbrand ram?

I just got off the phone w/ 1800 4 memory because the ram I bought (1 gig to max out my computer to 2 gigs) is faulty. They suggested that it might be apple trying to keep people from using third party ram. He suggested I pay more for the samsung ram (that is what originally came with my computer).
I opted to receive another stick and see how that works. Has off brand ram been a problem for MBP's?

Most all RAM comes from the same manufactures. There are just a few, and they get together like the oil industry, cut back production, and drive prices up like you seen this summer/fall.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Any OMNIS subscribers had success with iWeb '08?

Similar Messages

Maybe you are looking for