Any one configured 2 SAP ROUTERS?

Hi Experts,
I have few questions regarding SAP ROUTER having more than one.
1. I already have one sap router installed. we are installing it for backup. I want to know can I install the latest SAP router as a 2nd router where the old some maybe not the latest one? would I be able to use both of them same time incase if one goes wrong the other can work fine?
2. I was going through sap router guide to download the router software, it took me to support packs. Can you please help me finding the SAP router software?
3. Once I install sap router, I have to install library to encript the data. Once I do that, I would definitely need to have VPN setup. Here is my question, the old sap router already have VPN connection, do I need one more VPN connection for another SAP ROUTER? (the new one) ...
I have never installed SAP ROUTER before, therefore, I would like get my concept clear.
I would appreciate your help!!
it will be very very helpful if i can get step by step?...
Thanks guys,
i will post points def...

follow http://help.sap.com/saphelp_nw70/helpdata/en/4f/992d91446d11d189700000e8322d00/frameset.htm to download and install saprouter.
Cheers,
-Sunil

Similar Messages

Has any one configured Tomcat 4. with SSL?

Has any one configured Tomcat 4. with SSL?
Please I am getting a problem with this.
When I say $tomcat_home/bin>startup,it starts up fine.
When I change to the server.xml to point out to the server
ceritificate I have created using the keytool,and again say
startup,it disappears.
Here is the extract of my server.xml
Can some one please help as to what i am missing?

<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8443" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="100" debug="0" scheme="https" secure="true"
useURIValidationHack="false" disableUploadTimeout="true">
<Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
keystoreFile="C:/AHTTPS_UrlConnect/.keystore"
keystorePass="changeit"
clientAuth="false" protocol="TLS" />
</Connector>

this works for me

<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8443" minProcessors="5" maxProcessors="200"
enableLookups="false"
acceptCount="10" connectionTimeout="60000" debug="0"
scheme="https" secure="true">
<Factory className="org.apache.catalina.net.SSLServerSocketFactory"
clientAuth="false" keystoreFile="c:\jwsdp-1_0-ea2\tomcat_keystore\tomcatks" keystorePass="tomcat" protocol="TLS"/>
</Connector>

Can any one suggest about sapi

hi gurus,
can any one explain,. what is   sapi . what for it used.
regards,
praveen

Hi,
The BI Service API (SAPI) is a technology package in the SAP source system that enables the close integration of data transfer from SAP source systems into a BI system.
The SAPI allows you to
●     make SAP application extractors available as a basis for data transfer into BI
●     carry out generic data extraction
●     use intelligent delta processes
●     access data in the source system directly from BI (VirtualProvider support)
http://help.sap.com/saphelp_nw04s/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
Regards.

Any one worked with SAP Fiori Or Personas

Hi Experts
Can you please let me know if any one of you have used SAP Fiori or Personas.
I have a ABAP Webdynpro application and Client has a question if we can migrate similar things to Fiori or Personas.
More intrested for Fiori as it can be used via mobiles as well.
Thanks in Advance
Rahul
Tags edited by: Michael Appleby

Hi Rahul,
I am not an expert in this matter, but i think i can share some info.
SAP Fiori uses a very different development approach using SAPUI5 (HTML5/Javascript/CSS etc).
I really don't know if there is a way to migrate WDA with your intent, it seems more like a redesign of your applications using the SAPUI5 resources, which can result in a reasonable amount of effort, depending on your WD applications quantity, complexity, size and other several factors.
It has to be sized very carefully, and the new designs must be based on a solid software modelling that suits and leverages the advantages of the SAPUI5 framework.
There is much content to venture into, you can search for SAPUI5 tutorials/info, or add it with Fiori.
Here is an example of interesting content from last year:
What SAPUI5 and Fiori tells us about the future of UI development skills
Hope it helps you, i am also studying these topics, please feel free to correct my mistakes.
Regards,
Renan

Can any one offer advice,,,Wireless routers/base stations ?

I have iMac G5 (Tiger 10.4) I am considering going wireless- but know very little. ( My ISP is Wanadoo) If I look to getting a router from Wanadoo, or separate source, what should I be aware of in terms of any 'extras' needed.
Does expenceof the Airport Extreme Base station offer an easier way (ie is it plug /play) or do you need a degree to install and operate. Your views and advice of how to about this (and possible economic outlets) would be most appreciated....Cheers loons

Oh also on a site note: Normaly if you are behind a router / NAT the IP's you have a private non routable IPs. Something like 192.168.1.xxx or 192.168.2.xxx. There are a few others.
Anyhow your router is configured to run as a DHCP server for your local network. Anyhow nothing stops you from assigning static non routable IPs to your computers. You can even mix and match...
For example in my network every computer with a server role has a static IP in the range from 192.168.2.10 to 192.168.2.49. The router is configured to assign IP addresses to computers that do not have a static one from 192.168.2.50 to 192.168.2.100.
So if my notebook roams arround it uses DHCP, if friends bring their PC for a LAN party they get a dynamic IP for the time they stay while I can access the servers over a static IP.
This of cause has nothing to do with your external IP that you get most likely over DHCP from your ISP and that can change.

Have any one configure transparent caching on ACE module

How to configure transparent caching on ACE module? Please kindly give me a example configure. Thank you very much.

here is a basic config.
The module will intercept traffic coming in on vlan 20 and loadbalance it doing a url hashing to caches in vlan 30.
The mode is transparent so the destination ip address is preserved.
serverfarm host CACHES
transparent
predictor hash url
rserver linux1
inservice
rserver linux1-24
inservice
class-map match-all VIP-TCP80
2 match virtual-address 0.0.0.0 0.0.0.0 tcp eq www
policy-map type loadbalance first-match SF-CACHES
class class-default
serverfarm CACHES
policy-map multi-match SLB-CACHES
class VIP-TCP80
loadbalance vip inservice
loadbalance policy SF-CACHES
interface vlan 20
ip address 192.168.20.123 255.255.255.0
peer ip address 192.168.20.121 255.255.255.0
access-group input PERMIT-ANY
service-policy input ALLOW-ALL
service-policy input SLB-CACHES
no shutdown

Hi could any one tell me if the proxy configuration is a must for file to

hi could any one tell me if the proxy configuration is a must for file to mail scenario

Not needed at all.
Proxy are used when integrating with a SAP system and in the case of a file to mail scenario all you need is a sendr file adapter and receivr mail adapter and a mail server in the same netwrok as you XI server.
Regards
Bhavesh

Need help configuring: 2 wireless routers with 2 different SSID's on one network

Hello everyone:
I've been reading around on the forum trying to find the answer to this question, but have not found any clear cut answer that satisfies all my requirements. A more in-depth explanatiion.
I have 1 IP address coming in via cable modem. I want to configure two wireless routers (one secured with WPA-TKIP, and one unsecured--a "guest network" if you will) each with different SSID's. The secured network would be for my server, home PC's, IP webcams, DynDNS updating; while having an unsecured wireless router that friends and family can access. Ideally, I do not want anyone who accesses the unsecured wireless router to be able to get access into my secured network.
Can someone please tell me if this is possible. I think it is based on some posts I have already seen, but specific details about how to do it would be appreciated. Additionally, my DynDNS has to still be able to update with my ISP's IP so that I can access my server and home webcams.
EQUIPMENT
2 - WRT54G
1 - EZXS55W
1 - WVC200
1 - WVC54GC
(all of my stuff --webcam, server, dyndns, etc -- is working currently on my secured network. I just need to add the unsecured network)
I know this is a lot, but I would appreciate any help. THANKS.
Solved!
Go to Solution.

You must have the main WRT54G router connected to the modem. Set up the secured wireless network on the main router. Connect all your wireless computers or devices to the main secured wireless network.
Let's consider the IP address of the main router is 192.168.1.1.
Now connect only one computer to the Port 1 on second wireless router.
Open the setup page of the second wireless router. Change the wireless settings, SSID, unsecured.
Change the IP address of the second router to 192.168.2.1. Save the settings.
Connect the cable from the Ethernet port on the main router to the Internet port on second wireless router.
Power cycle the second wireless router.
Now the guest computers connected to the second wireless unsecured wireless network will be able to access the Internet only. They will not able to see the computers or devices connected to the first wireless router.

Can any one send me step by step UWL configuration guide.

Hi,
Can any one send me step by step UWL configuration guide.
Regards,
Gurprit

Hi...
Refer these too..
Personalizing UWL
[http://help.sap.com/saphelp_nw04/helpdata/en/50/f5b3e1ad524c54a94fa768a648e232/frameset.htm]
Administration/Configuring of UWL
[http://help.sap.com/saphelp_nw04s/helpdata/en/69/002903c91546aebc3197daff3d5b36/frameset.htm]
Thanks....

Can any one help me in configuring internet on E220R

Hi All,
I am trying to configure internet on E220R and on Solaris 8.
I am having a Linksys router and default IP for my router is 192.169.15.1
I am using Roadrunner High speed broad band connection.
Subnet mask : 255.255.255.0
Default Gateway : 192.168.15.1
DHCP Server : 192.168.15.1
DNS Server: 192.168.15.1
I have not configured and domain name server here. Then what will be my domain name to add in the reslov.conf.
With these details can any one help me. Your apprciate your help.
Thanks
Raj.

PChandran wrote:
Thank you Jerry. Are you aware of any program that does plot Value vs. Label other than Excel, or does Numbers do it as well?
Chandran
Chandran,
Yes, Numbers does it well, with two value axes and one category axis. When you Insert the Chart from the Insert menu, it's called 2-Axis. When you use the icon on the Toolbar it's the last choice in the list.
Jerry

Hi gurus, can any one explain me about patches in SAP?

Hi gurus,
Can any one explain me about patches in SAP?
Regards
Raghu

Hi Raghu,
If you do bit of googleing you will get information.
http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm
http://help.sap.com/saphelp_smehp1/helpdata/en/57/4e0eb0eae6457ea69b509813048989/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/a8/02784278b66255e10000000a155106/content.htm
http://www.saptechies.com/support-package-stack-guide-sap-netweaver-70/
http://www.sapdev.co.uk/upgrade/sap-patching.htm
http://www.erpgreat.com/basis/sap-patch-administration.htm
Regards,
Deepanshu Sharma

Can any one explain me consolidation topic in sap bpc ?

hi
please explain me consolidation
can any one explain me consolidation topic in sap bpc
thank you .......
suresh

Hi Sures,
It's like can you explain BPC ?
Do search on scn.
Refer below links, may be helpful,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7070134c-1b04-2d10-f29d-bbb35abfa119?QuickLink=index&…
BPC Step by Step Scenario Document
SAP BPC 10 DOCUMENTS
Shrikant

Can any one tell me how to deactivate vendors in sap whom we have not done business for last 18 Month

Can any one tell me how to deactivate vendors in sap whom we have not done business for last 18 Month>

Hi Jahanzaib,
You can go to transaction FK05 and block the vendor if you want to deactivate the vendors.
Thanks,
Ameet

Any one prepar integration test cases in SAP XI

Hi,
any one help me ,how to prepare integration Test cases in SAP XI
bye
suresh

Hi All,
This is my Scenario,here java system(sapphire) and sap system ,in this one example is
Whenever inspection lot is created, the inspection lot data should go to the receiver that is sapphire through XI. This User exit is tested to see whether IDOC Function module is populated or not and to check whether Idoc is populated.
In this scenario,we r using File to IDOC
for this scenario we are writting a integration teat cases.
bye
suresh

Can any one please send me study material on ADOBE forms (used in SAP)

Can any one please send me study material on ADOBE forms (used in SAP).

Hi,
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/bwp_interactive_forms_adobe.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm

Any one configured 2 SAP ROUTERS?

Similar Messages

Maybe you are looking for