Any one have a Line 6 TonePort UX2?

Any one have a Line 6 TonePort UX2? Maybe not as it's pretty new. It looks like a great thing for we guitarists. I'm thinking of acquiring it instead of the Presonus Firebox (on loan right now from a friend) because of all the Line 6 guitar amp models included for less than the Presonus. It would be cool to have those as well as GTR Amp Pro in Logic. The Line 6 also has vocal preamp modeling.
See it here: http://line6.com/toneport/overview.html
Dual 1.8 GHz PowerPC G5   Mac OS X (10.4.3)   1 GB RAM, 1972 Gibson LP, Martin HD-35, Alembic Solidbody Electric 12 string

I have a UX2. I've tried a number of soundcards (mbox, maudio firewire 410 and firebox) and found this to be comparable with the best of these on sound quality (great preamps and A/D converters) , and superior to all three on effects, price and useability. It just has that X factor - 'It makes you want to record". Mine has worked seamlessly with Garageband, Ableton Live and Final Cut Pro where the others have all had various conflicts with my software. The Vocal amp models have turned my SE2200A mic into a much classier sounding beast and the Guitar and bass amps are great too. For the money, you can't get better.

Similar Messages

  • MacBook Pro 13" Line 6 Toneport UX2 Problem

    So here is my problem...
    I have a Line 6 Toneport UX2 hooked up to my Macbook Pro (13' 2.4GHz 2010) and I use it to record music in Logic. When I hook up my MXL 990 condenser mic to the Toneport and turn phantom power on, I get no sound except for static in the Output and Headphones. I'm thinking the USB port on my Macbook Pro cannot handle 48v of phantom power. Can someone confirm this? And if that is the case, would the USB on a 2009 Mac Mini give enough power?

    Does the Toneport have its own AC power supply?
    Have you tried powered USB hub?

  • "Line 6 TonePort UX2" vs "M-Audio FireWire Solo" vs "FIREPOD" with GB3

    Hello Folks,
    I just purchased GarageBand 3 and I want to get some hardware to be able to play and record my songs with good recording quality. I will be using my voice, a guitar, GaragaBand 3, and a music keyboard.
    Has any of the PRO's here tried the "Line 6 TonePort UX2" and "M-Audio FireWire Solo"? They cost about the same.
    I am also looking at the PreSonus FIREPOD.
    1. What are the pros and cons of each with GB3?
    2. Which one will allow me to make good quality recording of my voice and instruments?
    Any comments and/or recommendations?
    Thank you in advance for your time.
    Cheers!

    Your FireWire drive didn't stop working because of an OS upgrade. It may have died, but the OS change didn't "Stop supporting it" (I have 8 FireWire drives online, all the time, 2 of which are from about 6 years ago)
    Everyone's needs are different, so only you can make the final decision, but like Schneb said, those are probably all good choices.
    From my readings here I shy away from M-Audio because their driver updates have lagged behind OS updates. They DO update them, but sometimes people have been stuck because they updated their System without checking if there were new drivers yet, and then found they weren't available yet.
    My opinion (IOW, if I were buying right now) would be one of the PreSonus products, neither of which require drivers (though the Inspire does have a software control panel, this is not necessary for the operation of the interface itself)
    Once that decision was made, it would be a time to figure out future needs. If you think you might like to be able to record 8 tracks at a time, hands down, the FirePod would be my choice. If not, then the Inspire would be a fine choice.

  • Does any one have good idea about the backup and recovery georaster table?

    Does any one have good idea about the backup and recovery georaster table?
    Best Regards,
    Lin
    Edited by: ylin on 2009-10-10 上午2:07

    for backup and recovery, please follow the standard procedure of general database backup and recovery. you need to backup both the georaster table and all related RDT tables.

  • My iPhone 6 wont come on when home button is pressed and screen pixels out and fades.  Any one have fix or same problem?

    My iPhone 6 wont come on when home button is pressed and screen pixels out and fades.  Any one have fix or same problem?
    When I press the home page the screen activates but stays black.  I have to press the side button to turn if off then may have to repeat several times to get my phone to come on.  Sometimes while using the phone the screen will become pixelly and start to fade away leaving a white screen with vertical line on it.  I have to use the close button to make it go away.

    If one of the two major buttons of your phone is broken, it is unfair to expect normal operation to be available. The first resolution to any problem involves a usable Home button, as does the second option for resolving any problem.  Get your Home button fixed.

  • I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

    I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

    iTunes 11 is compatible with
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    Try:
    Trouble installing iTunes or QuickTime for Windows

  • Does any one have a solution to a blank disk not being read and unresponive to the eject button?

    does any one have a solution to a blank disk not being read and unresponive to the eject button?

     
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive
    The Stuck CD/DVD Thread

  • I am running an Apple imac G-5 with OS 10.5.8. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

    I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM.  I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

    Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.

  • HT4623 I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to  11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestion

    I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to  11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestions?

    I had the same problem. My phone wasn't finding it so I tried plugging it into my laptop and it said I needed the latest iTunes which I already had.... I unplugged my phone from my laptop and did a soft reset to my phone (hold down the lock button and home button at the same time until your phone turns off) once it turns back on you should find the update... Click general... Software update. Worked for me!

  • The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    Just re-set the App -
    Open the App
    Hold down the power button until the slider appears
    Hold down the home button (Don't use the slider) Until the App Closes
    You might lose your place, but shouldnt be too hard to find it again...

  • Any one have any information about Security Group to send it to me

    any one have any information about Security Group to send it to me
    what is it and how can we use it in our work

    Have a look in the general R12 MOAC and FA concepts.
    With security groups, you can defined a set of organizations with a shared access.
    E.g. you defined one Secruity groups and assigned in these group 5 organizations.
    The security group is assign to a responsibility.
    You have access to these 5 organizations over one responsibility, you must not change the responsibility, if you will enter transactions for a other organization.

  • HAI IF ANY ONE HAVE FAQS ON ABAP-HR

    HELLO ,
    IAM  TRYING FOR JOB ON SAP-ABAPHR SO ANY ONE HAVE  FAQ'S WITH ANS PLZ SEND ME. ANY OPENING PLZ SEND THE INFORMATION.
    THANKS IN ADV

    http://www.sap-img.com/human/hr-faq.htm
    http://www.sapgenie.com/faq/hr.htm
    these links will help you for good questions.
    Just checkout the below sites.
    www.KnowledgeStorm.com
    www.onestopsap.com/interview-Question/hr/
    Check these.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
    http://www.atomhr.com/training/Technical_Topics_in_HR.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    you can see some Standard Program examples in this one..
    http://www.sapdevelopment.co.uk/programs/programshr.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
    These are the FAQ's that might helps you
    http://www.sap-img.com/human/hr-faq.htm
    http://www.sapgenie.com/faq/hr.htm
    http://www.erpgenie.com/faq/hr.htm.
    www.sap-img.com
    http://www.planetsap.com/hr_abap_main_page.htm
    http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
    HR
    http://www.sapfans.com/forums/viewtopic.php?p=498530&sid=d7ec5866e3fb26880da129de45ce79de
    http://www.sapcookbook.com/preview_hr_questions.htm
    http://www.atomhr.com/library_full.htm
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    http://www.planetsap.com/hr_abap_main_page.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983590,00.html
    Plz go through this links.......................
    http://www.allsaplinks.com/HRmaterial.html
    http://www.allsaplinks.com/timemanagement.html
    http://www.allsaplinks.com/payrollcompletefunctional.html

  • Does any one have same problem that can't text on iPhone 4 but can ring ?

    Hi there does any one have same problem just brought iPhone 4
    And I put SIM card in and finally get service but I can ring people
    But can't text as well been told to reboot phone through iTunes
    To make it back to a new iPhone settings been told by Vodafone
    To do it, but will it work?

    RCC0040 wrote:
    Hi,
    Today I tried to send a normal text message to 2 non iPhones today having sent messages successfully to these 2 phones on nye but neither would send.
    So far today I have tried:
    1. Calling, receiving calls and receiving texts from these phones works fine, even today
    2. Checking the send/ receive has my number in both sections. I have also tried a variety of setting combinations here of imessage on off etc
    3. The same with the phone section and my number
    4. Installed latest IOS update
    5. Restored network settings
    6. Turned off and on again
    7. Taken sim card out and cleaned it
    I would be very grateful of any further suggestions because I'm not sure at all why this isn't working today after not having knowingly changed anything since nye.
    Thank you!
    Ask your cell phone provider SMS is a carrier feature.

  • HT5935 Does any one have problem in FaceTime after updating to iOS 7

    Does any one have problem in FaceTime after updating to iOS 7

    No, none whatsoever. If you would describe your issue, someone may be able to assist.

  • When i connect my ipad2 64 gb to power its getting restarted again and again any one have any solutions???

    when i connect my ipad2 64 gb to power its getting restarted again and again any one have any solutions???

    You only need to post one time.

Maybe you are looking for

  • Error while adding Region

    Hi, I am trying to add a new region to a seeded page. I created a new Region (stackLayout) and added a submit button under it. I then personalize the seeded page and add a Flexible Layout, Flexible Content. But when I try to extend the FlexContent wi

  • Where do I deploy common EJB helper and utility classes

    Hi, I have a number of EJBs that each use a common set interfaces, exceptions and Value beans. If I deploy using the iasdeploy command line, then I must package up all these common classes within each of the EJB modules - leading to a lot of duplicat

  • 5520 to 5525 all access rules being ignored.

    I copied my config from my old 5520 to our new 5525 and when I cut over to it from the inside out I could get to the internet no problem but from the outside in none of our access rules were working.  Could someone take a look at our config and maybe

  • TS4526 I am trying to buy movie from Apple TV but it keep saying that I need to verify my payment information

    Hi, Please help me. Because when I try to buy movie from Apple TV, it says that I need to verify my payment information. I have tried every possible way but nothing works.

  • Need correct syntax for global.ini for FC storage connector API

    for a scale out solution of 3 node HANA with master , worker and standby . this is my global.ini.  I am seeing an error when hana installer is trying to use the storage adapter to access the LUNs from specifications in global.ini. has anyone experien