Any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor ?

any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor and his card is connected through the DVI cable without problems ?

yup, no problems here! connected to a 19" AGNeovo F-419 TFT LCD, using DVI cable. nice picture!

Similar Messages

K8N NEO MS-7030 with 2x1GB DDR400

what is the preffered combination to use with this motherboard ?
ram on dimm1 and 3 / dimm2 and 3/ dimm 1 and 2 ?
Thx

Quote from: kakarocht on 04-April-06, 09:51:09
If you're going for dual channel then DIMM1 and DIMM2 (Green+Purple). Also up the RAM volt to 2.75-2.8V. Gd luck
There is no dual channel on the 7030. It doesn't hugely matter which slots you choose for the RAM on this board; I have mine in 1&2, and that works fine; I benchmarked with 1&2 vs 1&3 a while back, and it didn't make any significant difference.

K8N Neo MS-7030 Vista drivers

This is my first thread here, and I have a problem with my K8N Neo MS-7030 754 Mobo. I cant get my USB port to work at high speed, Vista won't let me use a Kingston 2GB USB for Readyboost, ( stick is optimized for Readyboost). Also cant use MSI mobo utilities, no driver found. Will there be updates for Vista driver for this board? Running AMD Athlon64 3700+, Nvidia 6800 agp, 2GB Corsair XMS DDR400, 400w Ultra PSU, LG DVD lightscribe, Lite On CD burner, seagate 80GB 7200 rpm HDD, floppy drive, Diamond 7.1 sound card, Vista Home Premium OS. New to system building, this is my first PC, trying to figure the driver issue out. Thanks.......By the way, does anyone know how I can get a MSI USB D-Bracket W/4 led read out, and the accessories for this mobo, like cables, CD, etc.

Quote from: Bas on 19-February-07, 01:52:33
You have to wait for drivers to get released, very few are.
You're not the only one, many people complain about the same problems.
I just bought this board (MSI K8N Neo V2.0 H (MS-7030) NF3-250 Socket 754 ATX Motherboard), and expect it from Fedex any minute. I'd heard (in a thread at Anandtech Forums, where I first heard about this board - http://forums.anandtech.com/messageview.aspx?catid=40&threadid=2019857&f that nVidia was not going to support Vista with this board, and I'd assumed that it was an across the board thing with nforce 3 boards, but I may have been wrong to make that assumption. So, seeing this thread has raised my eyebrows and now I am wondering if I do indeed have to give up the idea of upgrading to Vista with this motherboard. What is the truth here? Has nVidia recently declared their non-support, or did I dream that up?

K8N Neo (MS-7030) problem with Gigabyte 6600

Hi,
I got a problem with my K8N Neo (MS-7030) and Gigabyte 6600 together.
I just tried to upgrade my system with the following components:
PNY 5700LE 128M -> Gigabyte 6600 256M (GV-N66256DP)
Onboard sound -> CreativeLab SB Audigy 2 ZS Gamer
Here is my order of installation:
1. Win XP with SP2
2. Chipset driver 5.10 (5.11 crashed during installation)
3. ForceWare 81.98 (I tried 77.72 from Gigabyte as well)
The system went blank during (3) and never comes back. In the last 3 days, I must repeated the above procedures over 20 times. I tried combinations of diffierent version chipset driver with forceware, but still no luck.
Audigy2 was sitting in the middle PCI before. However, I encounter a few system lockup during the first 10 trials, then I found a post say Audigy 2 should reside in the orange, or the one far away from AGP, PCI slot. Things seems better after this change.
More detail about my system:
MB: K8N Neo (MS-7030) BIOS is the latest version, 1.9.
RAM: Corsair Value 2 x 512MB PC3200
PS: Antec 380W
Video: Gigabyte 6600 256M (GV-N66256DP)
Sound: CreativeLab SB Audigy 2 ZS Gamer
Thanks
Alex

Hi,
My PSU is Antec True3808 (5V/35A 12V/18A 3.3V/28A)
I forgot to mention before. The CPU is AMD Athlon 64 2800+.
Also, I had enough of installation for now. I pulled the new 6600 and put the old 5700LE back in. Now, I installed everything without a problem.
Could it be not compatible? PSU issue? Or something else?
Any suggestion?
I appreciate any help.
Alex

MOVED: K8N Neo MS-7030 754 socket, looking for parts

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=105761.0

this was posted in Other MSI Products area, so i moved to AMD64 Nvidia area for better attention
Quote
I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere.
How to contact MSI.
Quote
Also, any recommendation for a northgate chip cooler for ths board.
Can anyone recommend me a Northbridge fan replacement?

BIOS 2.1 K8N Neo Platinum 7030

What about the latest BIOS 2.1 K8N Neo Platinum (7030) ? Is it safe to upgrade or should i stay at 1.7 (that really works great) ?

If 1.7 is working for you I'd suggest staying with it. (Always a good idea even if the new bios is stable).
I had problems overclocking with V2.1 (the ide initialisation hangs) and many others have complained about problems with more than one stick of mem.

K8N Neo-MS-7030+3000 !No boot SPD

Why won't this board boot with SPD timings on CorsairXL=(Low volt/tight SPD timings) ?
Let alone boot over 225HTT--->K8N Neo-MS-7030+3000 !No >225+boot
And there's more than one thread about this, but no solutions being brought forward.

I dunno about you, but my BH5 will definitely not do 225MHz on 2-2-2-11 timings with the voltages available to this board. You need to isolate the memory from the CPU to determine which one is the culprit. Drop the RAM divider to "133MHz" (i.e. 3:2 ratio) and crank up the HTT (don't forget to change the HT multiplier to 3x). Now test your RAM buy lowering the CPU multiplier to 7x, setting RAM to "200MHz" (i.e. 1:1 ratio), and increase HTT.
Oh and if you think your pissy attitude is gonna convince others to help you, think again. Maybe if you tried asking nicely instead of sounding like the world owes you a favour, you might've gotten more replies. Of course, now when you experience the same problem on your new Abit board, I'll expect you to show up at the Abit forums whining and bitching there as well, and just like here they'll ignore you because you can't be bothered to word your posts more carefully and more helpfully (like specifying what settings you've already tried). If you can't even spend the time to give everybody the necessary info, don't expect anyone to help you.
Classic case of PEBKAC.

K8N Neo MS-7030 754 socket, looking for parts

I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere. Also, any recommendation for a northgate chip cooler for ths board. Thanks for you time.

this was posted in Other MSI Products area, so i moved to AMD64 Nvidia area for better attention
Quote
I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere.
How to contact MSI.
Quote
Also, any recommendation for a northgate chip cooler for ths board.
Can anyone recommend me a Northbridge fan replacement?

Could any one give me direction towards creating asset with REST/javascript

could any one give me direction towards creating asset with REST/javascript?

There is a sample bundled with webcenter sites at Misc/articles. You have to implement the proxy controller which serve as proxy for xmlhttp request.
The proxy will redirect the request actual REST resource in the target server

K8N Neo MS-7030 Rev 1 - Promise Ultra133 TX2 Help

I recently installed the MS-7030 board, for some reason if I use my Promise Ultra133 TX2 controllers the board will not POST if the controllers have a HD connected to them. Before upgrading these cards and HD's worked fine so I know these are good. Any ideas as to why this configuration does not work?
Are there any other recommended IDE controllers for the MS-7030 board?
Thanks for the help in advance!

Here are the system specs
MSI K8N Neo Platinum MS-7030
Athlon64 3400+
Samsung CL2.5 DDR PC3200 (x3)
Nvidia MX400 AGP Video
IBM IDE 30GB HD (x2) RAID0
Sony CD-ROM
Dynex 350 Watt Power Supply (Best Buy Brand)
Promise Ultra133 TX2 IDE Controller (x2)
Samsung 120GB HD (x3) software RAID5
1.44 Floppy
At first glance it appreaed as if my power supply might have been underpowered just as you are thinking. So the first thing I did was to swap the 350watt power supply out for a beefier 500watt version. The 500 watt version is a CompUSA brand. I realize it's not an Enermax or Antec but the 500watt power supply has been used before to power a server that had the exact setup above except it had dual athlon mp's plus external HD bays for the RAID5 set. Currently the 500watt power supply powers my gaming rig which consists of:
MSI K8N Neo2 Platinum
Athlon64 3000+
Radeon 9800 XT
Samsung CL2.5 1GB PC3200 (x2)
WD Raptor 36GB (x2) RAID0
Lite-ON DVD ROM
Pioneer 16X DVD+-RW
1.44 Floppy
Judging by the fact that the 500 watt power supply can power the above rig I surmise the issue is not a power supply issue. Also I flashed the bios to the latest and greatest version supplied by MSI which I believe was v1.9. As for the boot order I did check it and it is set to boot correctly from the primary HD. Thanks for the help.

K8N Neo Platinum 7030 Problem

I have a K8N Neo Platinum and as of the past week my computer has been acting really strange. I has had random lockups that at first made me think it was the video card. That wasn't the case. I tried a different power supply and that didnt help. So I decided to take everything out of my computer. I had everything unplugged from the motherboard power, ide cables, etc. I noticed as I was taking everything out that I felt like I was getting shocked by my case but I don't know how because I had no power supply in my computer and all the cards, processor, memory were taken out. When I took the mb out i didn't feel the shock anymore, but when I put the mb back in the case and hooked the power supply back up to it I did. I even vacuumed out the case totally removing all dust and dirt. Am I missing something here? HELP lol

thanks for replying glenn after 2 days of hunting i can now say
90% sure the whining is from the powersupply
using my advanced hearing device i found a flaw in its design. before i would put it near psu but not hear the whine from there. well it occured to me to tilt it ever so slightly (tip from radio broacasting in college) to let the noise in but block any wind from crossing the end of my tube. and ch ching finally from the rear of the psu is where it is loudest.
ive owned 3 enermax and theyve been the best psu ive ever owned. but this weekend im swap it with my other and see if it still happens. it will probably take 2 hours total do it which is why ive put it off this long. ive tried bumping the wires around even though its a full size chieftech with all my watercooling gear its almost impossible to not have the wires overlap each other at least a few times. but with the moving around i did do it didnt help.

Barley any sound from msi k8n neo

just got over my win 64 issue an got my system running ive up dated all drivers
nforce drivers
live updated digicell
amd drivers
utility drivers
updated my graphic drivers
updated my bios to 1.4
but when i hook up my speakers i barely get any sound
i made sure yhe on board was enabled in the bios
checked the obvious volume controls and speaker settings
and no matter what i play or do i barely hear the sound
unhookem and put them on my other pc = very loud
these are just normal non powered speakers up all weekend trying to do this
what gives? this is the only problem i cant fix

:-D)so sorry ive come to realize that i may need powered speakers
oh well heres to a successful k8n neo plat build
flashed w/all the latest bios and drivers
nforce, amd , realtek,
xpprow/sp1
cool and quiet enabled
corecell set to private at
stock cooling
bfg 6800nu
enermax psu , ocz ddr400 3200
lite on combo drive
maxtor sata 120g
in a mutant x case

Any one really use mw to upgrade 11i to R12?

any one is really ising mw to upgrade 11i to R12?

Yes we have many customers using Maintenance Wizard for their upgrades.

HELP! K8n Neo Platinum (7030) 2.10 Bios -- CPU overheating

AAAAAH Someone help me!!
I just downloaded the MSI Liveupdate program, and Updated my Bios from 1.7 to 2.10.
With Bios version 1.7 I was running my AMD 64 3200+ at solid 35-55 degrees (min to max)
Now with this new bios version, my CPU runs at 57-72 degrees (min-max) !!!!!!
HOLY CRAP -- this processor is not even rated to run at temperatures above 70 degrees Celsius!!
I'm in the danger zone as I type out this message to you guys, and I'm worried I'll reduce the shelf life of my processor.
CAN ANYONE HELP ME??? I've tried changing All the settings around in the bios, I've even set the processor down to about 1.8 ghz, and it's still running at temperatures above 55 degrees...
From what I understand there is no way of removing a bios flash, is that correct? Am I stuck with this crappy 2.10 bios flash?
What can I do? Please dear god... help me.

Ok answers to your questions:
My board is a MSI-7030 (K8N Neo Platinum) And Originally I flashed the bios from 1.7 to 2.1 Via Liveupdate (MSI Live Monitor & Live Update 3)
- I read your faq on how to manually rollback the bios, and i rolled back to version 1.9 (which I had never had before)
and that did not seem to work. My temp is still at 68-72 C -- even in the bios.
A few questions I need to ask now:
1) Is the next step is to revert back to 1.8? Then if that doesn't work, back to my original 1.7?
-- also, 2) Who is Syar? Where can I get his version of the bios? --
Finally: 3) What is the CMOS battery? I know what the Jumper is, but I'm not sure what the battery is...
Is that the circular battery that's next to the BIOS Jumper? (maybe a picture would help..)
Thanks for all the responses so far! you guys are saving me from having a major emotional breakdown here.. I thought I was going to have to buy a new mobo.
I'll check back here on the forums in a few hours to see if anyone has responded,
(p.s. TY SO MUCH for caring enough to help a fellow hardware enthusiast!!! )

MSI K8n Neo Platinium ( 7030 NMS ) anb BIOS.

I have a MSI K8n Platinium ( 7030nms )
Recently, I update the bios to the last version, with this BIOS, at more of 220 Mhz to FSB ( A64 3000@2200 Mhz ) system don't start, before the update the system runs perfectly at 2350 Mhz ( 235 FSB ) and unestable at 2400 Mhz ( 240 FSB).
¿ What it's the problem with new bios ?
I tryed flash a old version, the 1.2 or 1.3, but isn't possible, the flash program tell me of a bios protection, and jumper balblabla....
Please help me !

There are plenty of beta verions I'm currently running 1.5B6 very stable.
you can see them on
Syar2003's Bios Link
Quote
What BIOS ver. it's recomended ?
Try this thread to see feedback K8N Neo and Neo2 Bios Collection. *Updated 140 official for Neo2
luck

Any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor ?

Similar Messages

Maybe you are looking for