Any one using the Lacie d2 Quadra USB 3

I was wondering if anyone was using the Lacie d2 Quadra USB 3 Drive. If so, I was also wondering if the included management software can be deleted and just manage the drive via Disk Utility.
I just bought an OWC Mecury Elite Pro. I like it, except for the fan noise.

I have 4 of models with USB 2.0 which are almost identical. When you connect to the Mac for the first time the Lacie will sense it's connected to OS X and format correctly. After that simply forget about software or re-format the drive (Mac OS Extended (Journaled)) in Disk Utility and that will wipe the drive clean.
Congrat's on getting the drive, I have had mine for 4.5 years with no issues at all.

Similar Messages

  • Any one used the interface /RPM/IF_PFS_ITEM and form /RPM/FORM_PFS_ITEM

    Hi Friends,
    Any one used the above interface and form
    Regards,
    sasidhar

    Hi Karen,
    It seems to me that because the decision point happens before the tabular form is rendered (via the tree right?) you don't really need a "On Change" DA.
    I think you either need find the hms field c030, which could be hidden or visible, as depending on that value go hide or show the hms_info field.
    You'll want to do this either on Page Load or After Refresh or both, it depends on how the tabular form gets refreshed.
    Your DA On Load would be
    Event: Page Load
    Action: Javscript Code
    The code:
    $(".hms").each(function(index) {
      if ($v(this) == 'N') {
      var rowTR = $x_UpTill(this, 'TR');
      $(rowTR).find(".hms_info").hide();
    This code will find ALL your hms fields. if the field has a N then we go up to the TR, find the hms_info and hide it.
    If your page refreshes on every row and the Y/N values don't change after the page loads then you're done!
    What do you think?
    Thanks
    -Jorge
    PS.  This is odd... I thought I was replying to the previous thread.  Weird.
    Message was edited by: jrimblas

  • 1way.dll Has any one used the following

    I want to use a Copy right/evaluation program or dll, to give a limited trial period for an application written in Labview 6.1. Has any body used or has any good ideas for controlling such functions. I was going to try 1way.dll software but don't know how labview will cope with calling this dll. I would like to offer the client the ability to obtain a serial number for continued use.

    I can think of a couple of ways to do this. For small volume applications you could hard code the expiration date into the application prior to the build. At startup you could then check for a valid reistration code (this could be coded into an ini file) and then, if not registered, perform the appropriate task depending on whether the period has expired. You may also want to check during operation (say, for instance, every hour) to prevent continued use of the program by leaving it running. You could put a button on the front panel which is active an visible only if the program is not registered to allow for writing the registration code.
    The second way is to include the start data in the ini file and have the evaluation period hard coded. This method is l
    ess secure, although you could invent an encryption style for the date. Otherwise implementation would be similar.
    I'm not familiar with the 1way.dll software so I can't give you any guidance on how well that approach would work.

  • Has any one used the verizon iPad in Italy with a local data plan?

    I am plannign a trip to Italy. I have a VZ ipad 3rd gen.  I would liek to use a local data SIM for Italy.  VZ is $25 for 100MB.  I think TIM is about 9 eoro for 1GB.

    I can think of a couple of ways to do this. For small volume applications you could hard code the expiration date into the application prior to the build. At startup you could then check for a valid reistration code (this could be coded into an ini file) and then, if not registered, perform the appropriate task depending on whether the period has expired. You may also want to check during operation (say, for instance, every hour) to prevent continued use of the program by leaving it running. You could put a button on the front panel which is active an visible only if the program is not registered to allow for writing the registration code.
    The second way is to include the start data in the ini file and have the evaluation period hard coded. This method is l
    ess secure, although you could invent an encryption style for the date. Otherwise implementation would be similar.
    I'm not familiar with the 1way.dll software so I can't give you any guidance on how well that approach would work.

  • Has any one used the program mac keeper

    Found a program called Mac Keeper but I want to hear from people that are not on their web page if it really works.

    It sounds like your Mac does not have the correct processor for Lion. There always has to be a cutoff somewhere.
    Is there anything your Mac is not doing for you?
    If it works for you then use it.
    No need to whining and moan to us about it.
    IMHO you should consider yourself extremely luck to have been able to use MacKeeper without any problems.
    I recommment that MacKeeper be avoided at all cost. It charges you to do thing that you can with the operating system for free.
    Allan

  • Does any one use the SPIGEN iphone case? if so, can you tell me the difference between the ultra fit, ultra fit a, ultra fit s, and ultra hybrid? also does this case get in the way of the camera flash? i ask because the camera opening seems so small.

    also if you dont recommend this case please point in the direction of the best slim fit case

    The Ultra Fit A has a cutout on back to display the Apple logo. The Ultra Fit and Ultra Fit S do not. And the Ultra Fit and Ultra Fit A are a soft matte finish all over, while the Ultra Fit S has a brushed finish in its midsection.
    The Ultra Hybrid is a bumper, with back protection. (1) It's made of TPU (for anti-shock) vs. the all polycarbonate (for anti-slip) Ultra Fit/A/S.
    (2) It also has power and volume buttons overlaying Apple's, which the Ultra Fits do not. (3) Lastly, it covers all four sides, whereas the Ultra Fits cover the left and right sides and wrap around the four corners, leaving the top and bottom exposed (which is good if you want to connect some models of headphones or adapters that require more space there).
    They're all properly designed for the 5/5S flash, including the black around that cutout (you don't want to buy a case that doesn't have a black rim there).
    IMO Spigen's slim cases are better made/more durable than other third-party cases (of which I've bought aplenty). I love mine!

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • We are thinking of the Ipad  - any one use one at the beach?

    We are thinking of the Ipad  - any one use one at the beach - any glare from the sun?

    They are not ideal for use in bright sunlight due to the reflectiveness of the glass. An anti-glare cover might help, but if your main use will be to read books on the beach then a dedicated ebook reader would probably be better

  • Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

    Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

    Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

  • Can any one share the Oracle Reports 6i Developer demo table scripts?

    Hi,
    I have to learn the Report 6i for my office project, I have installed the report 6i developer but I could not get the Demo CD, can any one share the Scripts for table (viz. Stock, stock_history , indcat ) creation and also the insert script for data population or provide the URLs where I can find the same.
    thanking you in advance.
    regards,
    Sham.

    Hi Denis,
    Thanks for the reply, I have the setup for forms and reports 6i, what i was looking is the script to create the tables used in the
    Oracle® Reports Developer
    Building Reports
    Release 6i
    January, 2000
    Part No. A73172-01
    the table names are stocks, indcat etc, generally these demo script come along with the demo CD provided by oracle as i don't have the CD i am looking for these table creation script. if you have these scripts kindly share the same with me.
    regards,
    Sham.

  • Any one use java call oracle ERP stored procdure

    Hi,
    Any one use java call oracle ERP stored procdure?
    Example I want ues java call below stored, it can work , but in Oracle ERP have error : "APP-MRP-22130: Cannot connect to database
    Cause: The current routine cannot connect to the database.
    Action: Contact your system administrator or customer support representative.
    CREATE OR REPLACE procedure XXBOM_ITEM_IMPORT
    is
    x number;
    begin
    fnd_global.apps_initialize
    (1070, /*i_user_id*/
    20634, /*i_responsibility_id*/
    401 /*i_application_id*/
    /* import item */
    x := fnd_request.submit_request(
    application => 'INV',
    program => 'INCOIN',
    argument1 => 141,
    argument2 => 1,
    argument3 => 1,
    argument4 => 1,
    argument5 => 1
    end;

    Note 164701.1 in metalink may be relevant.

  • Does any one know the hot key / command to hard delete from an external Drive

    Does any one know the hot key / command to hard delete from an external Drive (i.e. delete direct without having to put in trash first)?

    Nothing happens on a hard drive that doesn't involve the computer.
    Here's a list of all the keyboard shortcuts. I don't see anything such as you have described, so perhaps you once used a keyboard macro or have not described what you mean properly.

  • Filter data on any one of the field in Hirarchical ALV?

    Hi,
    Can any one tell me if I am using Hirarchical ALV for outputting the data, and I have to filter out the output  data on any one of the column in the Hirarchical ALV, Is it possible ?
    Can we filter out the data on the basis of field which is not the key field in the Hirarchical ALV?
    Mrunal

    Try using IT_FILTER...SLIS_T_FILTER_ALV...I guess...
    santhosh

  • Are there any problems using the Ipad while is is plugged into the wall and charging?

    Are there any contraindications using the Ipad while it is plugged into the wall and charging???

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • Is t-mobile contract free iphone6 unlocked or not outside usa?? Is any one using it with other carriers??

    Is t-mobile contract free iphone6 unlocked or not outside usa?? Is any one using it with other carriers??

    i have a contract free t-Mobile iPhone 6 plus which Im using on ATT - i havent yet tried it outside the USA - but last year i bought a contract free T-Mobile 5s and it worked fine outside the US - so im hopeful nothing has changed

Maybe you are looking for