Any one with solution ipad 3 not activating

solution to activation error ipad 3 not activating

Howdy petndemi,
It sounds like you are unable to activate your iPad after updating it. I recommend the troubleshooting steps in the followng article, named:
Get help activating your iPhone
If your carrier provided a SIM card, make sure it's in your iPhone.
Restart the iPhone.
Try to reach the activation server another way, then try to activate.
Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
Try connecting to iTunes if you can't activate using Wi-Fi.
Restore the iPhone.
Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

Can't play sound on Mac book air when switched to windows mode any one with solution to that..?

Cant play sounds on my Mac book air when switched to windows mode

Do you have any unknown devices in Windows Device Manager? Are the BC drivers installed?

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )

HT6147 I am not able to create a hotspot form my iphone 4 after upgrading to ios 7 . Do any one have solution for it

I am not able to create a hotspot form my iphone 4 after upgrading to ios 7 . Do any one have solution for it

Verify that your carrier supports Personal Hotspot for your device and that you have Personal Hotspot enabled on your cellular plan:
From Here > http://support.apple.com/kb/HT3574
Trouble Shooting > http://support.apple.com/kb/TS2756

Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer

I m create a new ring tone. i m trying to transfer in my iphone but not copied in iphone.. any one have solution??

i m create a new ring tone. i m trying to transfer in my iphone but not copied in iphone.. any one have solution?

Actually, I've found that I can sync tones I made of up to at least 40 seconds (0:40 minutes). A 50-second tone would not sync, but a 40-second tone would. Voila!

Does any one implemented solution for httpservlet request/response object in IWSDLInterceptor implemented class?

I am trying to handle Producer not available situation in which I am using Interceptor IWSDLInterceptor in WLP 10.3.4. I am able to retrieve exception using onWSDLException but from here if I have to forward my pageURL object I need httpservlet request and response. I tried my own filter class to have its own customize request and also tried it out all other Interceptor to see if any one can handle IOException. I did manage to throw my own Customize exception but that also did not work out as Page does not have any backing file or any supportive Controller class.
Does any one implemented solution for httpservlet request/response object in IWSDLInterceptor implemented class? or do we have any specific documentation in regards to this? As I am not able to find much martial on IWSDLInterceptor except Java API from Oracle and article defining Two way SSL handshake Producer.
Any kind of help is appreciated.
Thanks
PT

Thanks Emmanuel for your response but render behavior is not available for IWSDLRequestContext/IWDSLResponseContext object which IWSDLInterceptor uses for implementation.
Let me put my question in little simpler manner. May be my approach to the problem is not proper.
Problem : Handle Producer Not available (no application exists on server) on consumer side.
So far tried approach : Producer is not running then I am able to handle that TransportException at IInitCookieInterceptor/IHandleEventInterceptor onFault behaviour but in the case of Producer not even exists Consumer try to get WSDL fetch operation and failed with FileNotFoundException.
To handle this exception, I used IWSDLInterceptor which is available under IWSDLInterceptor.OnWSDLException (Oracle Fusion Middleware Java API for Oracle WebLogic Portal)
I am able to catch the exception but problem arise when application needs to forward at specific page/render portlet for this situation. For that it required request/response object but IWSDLInterceptor does not give any kind of instances to redirect request as there is no direct access to HTTPServlet request/response object.
I tried my custom request object to use there. I tried out custom filter object of IWSDLrequestContext. nothing works.
One approach works is to put producer WSDL file at consumer level. But in that, you need to handle different producer files for different environment. Which I don't think its a good approach.
eAny one Let me know if my approach to the problem/scenario is wrong. Or if I am missing out any other supporting interface which also required to handle this scenario. or I am using wrong interface for this scenario.
Thanks for your help in advance.
PT.

Hi, I'm from Viet Nam, my Ipad not actived, why??? S/N: DN*****VGH. Please help me.

hi, I'm from Viet Nam, my Ipad not actived, why??? S/N: DN*******VGH. Please help me.
Ipad 3, 32 GB, Wifi + Cellular. FW my Ipad is 5.1.1
After me reset all setting, my device not actived,
Message was edited by: longcoi32
<Edited by Host>

Ah! Can't say I've ever heard of that screen. However, I did find other similar topics. Try these steps, which worked in one the other discussions I found on these forums.
1. Removed all IPSW files form ~/Library/iTunes/iPad Software Updates.
2. Powered down iPad completely.
3. Opened iTunes.
4. Held down the Home button on the iPad while connecting it to iTune via cable.
5. Had iTunes download the correct IPSW and restore my iPad.
These instructions presume you have a Mac since the ~/Library/... refers to your user account on your Mac. Step 4 assumes you have your iPad connected to your Mac with the provided USB cable.
If you don't have a Mac, try rebooting your router by turning it off, and turning it back on.

Hi! every one ... i mine phone ettings cant be restore its ask passcode am enter mine present mine old all passcode but they cant work . if any one know solution mine problem plz rply . thanks regards

hi! every one ... imine phone settings cant be restore its ask passcode am enter mine present mine old all passcode but they cant work . if any one know solution mine problem plz rply . thanks regards

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

With Firefox open an update window came up; I clicked on Restart Later. When I later clicked on Firefox icon, a message brefly appeared "Firefox is damaged and cannot be opened" and the icon changed to a generic one with the "Do Not" slash across it.

With Firefox open an update window came up; I clicked on Restart Later. When I later clicked on Firefox icon, a message briefly appeared "Firefox is damaged and cannot be opened" and the icon changed to a generic one with the "Do Not" slash across it.

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Is there any charge with my ipad icloud when i use it outside canada just like philippines?

Is there any charge with my ipad icloud when i use it outside canada just like philippines

There have been a few reports of problems, but most users on this forum report no problems.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Can i use fitbit one with an iPad

Can I use FitBit One with my Ipad?

According to the website, It appears you can sync wirelessly to mobile devices like the iPad.
I would read the user guide for it to learn how to do it.
https://desk-customers.s3.amazonaws.com/fitbit/Fitbit%20One%20Product%20Manual%2 0-%20English.pdf
fitbit wrote:
Syncing to an iOS device
Your One can sync directly to supported iOS devices via Bluetooth 4.0. To see if your
iOS device is compatible with your Fitbit One, go to http://www.fitbit.com/devices.
Also iOS is a proper Operating System. Its just different to that of a computer.

Why when any one call me photo not appear on full screen

Why when any one call me photo not appear on full screen

Because Apple changed the way the caller's photo is displayed in iOS 7.1.

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

No problems here.
Edit...
My IOS-7 is on an iPod Touch.

I suddenly cannot connect to any wifi with my ipad 1. In settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal.

I suddenly cannot connect to any wifi with my ipad 1. in settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal. I have reset the Wifi under General. But when I type in my password it still says, "Unable to join the network."

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Any one with solution ipad 3 not activating

Similar Messages

Maybe you are looking for