Any option is there to find the error record in loop for huge amount of rec

Hi Guru's,
In our production system we got a error. While debugging we found one of our loop getting 1 lakh records. One of the record from the internal table having some wrong values because of that its giving a error message. But we are not getting any proper message.
Now our problem is its very difficult to debug all the records one by one. Even its not possible to give Watchpoint. bze in what situations its giving this error that also not predictable. So how to find the error record?
Kindly suggest.
Ananadhan

Need a lot more info.
To start with is this CR Designer or some other product?
I suspect it's classic SAP products like Business One etc., if so please mark as answered and post your question int the correct forum.
Thank you
Don

Similar Messages

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

Hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

Other than physically looking for it, no. It does not have WiFi.

Is there any options to know what is the particular field that has been changed or updated in AR invoice?

Hi...
Is there any option to know what is the actual field that has been updated / changed in the AR Invoice document.
ADOC and ADO1 Contains the history of the updated documents .....
but i need what is the exact field that has been changed....?
Is there any option.....?

Hi Gopi,
Please check below links.
http://help.sap.com/saphelp_sbo882/helpdata/en/45/06b97f7d720487e10000000a155369/content.htm
Queries off the Change Log
Query for Change Log
In above links, You can Modify Query as per your requirement.
Hope this help
Regards::::
Atul Chakraborty

Is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?

is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?
like in windows a search-funtion?
I have found one VI, it list the data in the directory self (the pfad from the data as string) but not the data in an under-directory. it also has the funktion to list me the under-directory but it do not list the complite data in every directory
can somebody help me pleace
THX

Hallo Chef,
unter LV8.21 befindet sich die beschriebene Funktion in der File-Palette:
Dummerweise gibt es die Funktion in LV8 noch nicht... (Deshalb ist es immer eine gute Idee zu sagen, mit welcher LV-Verson man arbeitet!)
Du kannst aber unter vi.lib/utility/RecursiveDirList.llb nachschauen, wie es gemacht wird
Message Edited by GerdW on 08-17-2007 11:17 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
AdvFileFunc.png ‏10 KB

I have the ipad2 wifi and now want the 3G instead, any options out ther besides the obvious.

I have the ipad2 and now I want the 3G instead. Any options out there besides the obvious??

The iPad itself can't be upgraded. If you want 3G and you don't want to sell yours (or return it if you are within the returns period), then you could use an iPhone as a personalobile hotpost for it, or get a mifi device which act as a mobile hotspot

Not able to find the Error in code !

please help me to find the error in my code. When I Added x1~kondm its not giving anything i.e
*join t178t as x1
*on p1kondm = x1kondm
in the SQL part !
REPORT YINTERACTIVEPROGRAM01.
TABLES:VBAP,
 VBPA,
 VBRP,
 VBRK,
 KNA1,
 ADRC,
 TPAR,
 TVKGG,
 TVM1T,
 TVM2T,
 TVM3T,
 TVM4T,
 VBKD,
 SZA1_D0100,
 T178T.
TYPES:BEGIN OF TY_TAB,
 VBELN LIKE VBAK-VBELN,
 VKORG LIKE VBAK-VKORG,
 ERDAT LIKE VBAK-ERDAT,
 AUGRU LIKE VBAK-AUGRU,
 BSTDK LIKE VBKD-BSTDK,
 BSTDK_E LIKE VBKD-BSTDK_E,
 spart like vbap-spart,
 kondm like vbap-kondm,
 waerk like vbap-waerk,
 netwr like vbap-netwr,
 kwmeng like vbap-kwmeng,
 vkaus like vbap-vkaus,
 land1 like vbpa-land1,
 nrart like tpar-nrart,
 vtext like tpar-vtext,
 parvw like tpar-parvw,
 name1 like adrc-name1,
 name2 like adrc-name2,
 name3 like adrc-name3,
 name4 like adrc-name4,
 ort01 like kna1-ort01,
 pstlz like kna1-pstlz,
 vtext like t178t-vtext,
 END OF TY_TAB.
DATA: ITAB TYPE STANDARD TABLE OF TY_TAB WITH HEADER LINE.
parameters:salesno like itab-vbeln.
select s1~vbeln
 s1~vkorg
 s1~erdat
 s1~augru
 k1~BSTDK
 k1~BSTDK_E
 p1~spart
 p1~kondm
 p1~waerk
 p1~netwr
 p1~kwmeng
 p1~vkaus
 r1~land1
 t1~nrart
 t1~vtext
 t1~parvw
 n1~name1
 n1~name2
 n1~name3
 n1~name4
 c1~ort01
 c1~pstlz
 x1~vtext
into corresponding fields of table itab
from vbak as s1
join VBKD as k1
on s1vbeln = k1VBELN
join vbap as p1
on k1vbeln = p1vbeln
*join t178t as x1
*on p1kondm = x1kondm
join vbpa as r1
on p1vbeln = r1vbeln
join tpar as t1
on r1parvw = t1parvw
join ADRC as n1
on r1adrnr = n1addrnumber
join kna1 as c1
on r1land1 = c1land1
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
loop AT ITAB.
WRITE : /(30)'VBELN: ', ITAB-VBELN,
 /(30)'VKORG: ', ITAB-VKORG,
 /(30)'ERDAT: ', ITAB-ERDAT,
 /(30)'AUGRU: ', ITAB-AUGRU,
 /(30)'BSTDK: ', ITAB-BSTDK,
 /(30)'BSTDK_E:', ITAB-BSTDK_E,
 /(30)'SPART: ', itab-spart,
 /(30)'KONDM: ', itab-kondm,
 /(30)'WAERK: ', itab-waerk,
 /(18)'NETWR: ' , itab-netwr,
 /(18)'KWMENG: ', itab-kwmeng,
 /(10)'VKAUS:', itab-vkaus,
 /(30)'LAND1:', itab-land1,
 /(30)'NRART:', itab-nrart,
 /(30)'PARVW:', itab-parvw,
 /(30)'ADDR1:', itab-name1,
 /(30)'ADDR2:', itab-name2,
 /(30)'ADDR3:', itab-name3,
 /(30)'ADDR4:', itab-name4,
 /(30)'PSTLZ:', itab-pstlz,
 /(30)'ORT01:', itab-ort01,
 /(30)'Compiler desc:', itab-vtext.
 uline.
ENDLOOP.
 if sy-subrc <> 0.
 write : / 'No data found'.
 endif.

hi,
u failed to check relationship between tables and as well as mandatory fields need to be checked, i noticed following
from vbak as s1
join VBKD as k1
on s1vbeln = k1VBELN
join vbap as p1
on k1vbeln = p1vbeln and k1posnr = p1posnr
*join t178t as x1
*on p1kondm = x1kondm
join vbpa as r1
on p1vbeln = r1vbeln and p1posnt = r1posnr join tpar as t1
on r1parvw = t1parvw
join ADRC as n1
on r1adrnr = n1addrnumber * No relation between these two tables/b]
join kna1 as c1
on r1land1 = c1land1 and r1kunnr = c1kunnr 'here u need to check mandatory fields also
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
anyway, in performance point of view, writeing code with this much joins is not acceptable.
comeback if you need any further help
regards,
pavan
Message was edited by:
 pavan kumar pisipati

I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

Jdbc scenario .. where to find the error msg

Hi,
I am working on a scenario,
abap proxy->jdbc adapter->MsSql server.
Whle testing,
i sent the payload xml from the sproxy test sceen.
After that, i checked the "Monitor for processed xml messages" screen (SXI_MONITOR).
There it shows the status "Processed successfully" for the message that i sent.
But when i checked the sqlserver database, the record is not inserted.
Where can i find, if anything gone wrong at Jdbc adapter, or there after.
Thanks in advance,
Ganesh

Hi
apart from this communication channel you can see the message in adapter engine
to do this take the id of the message fromSXI_MONITOR
then go to transaction sxmb_ifr
inside this go to message Monitoring
under drop down select adapter engine and inside the window give the iD of your message which you have taken from MONI
if you are not getting the filter for message ID then click on additional filter and give the iD
after this you can see your message
select the radio butten inside your message and click on details
here you will get the log of each and every step which have been followed in processing the message and you can find the error exactly
regards
sandeep
If helpful reward points

Is there any way in FDQM to validate the source records against the essbase

hi everyone
i want to know is there any way that FDQM can validate the source records against essbase. say for example i have a a ud dimension member coming from the source i want to compare this member with essbase member in the outline and pass/fail the validation. can we do this?
thanks
tm

Hi
Are you processing through the web client or as a batch process?
If you are loading manually through the web then it is standard functionality to highlight any source metadata imported that does not get mapped to a target, you then get the opportunity to correct those members at the Validate stage. If you are setting up mapping tables with specific target members then these have to be valid members in the Essbase outline (although I guess there is a risk that those members change over time and do you mappings stay in sync), it also doesn't do that validation if you upload your maps from template files (.xls / .tra / .trn) or if you have a * to * like mapping.
If you are processing in batch then if there are any members that do not have a vliad target member after import (remember mapping is applied during the import stage) then the batch fails. You can use the AutoMapCorrect feature to overcome this and map to a default 'suspense' type member if that gives you an issue.
Ultimately if you get to the load stage and the combination of members is not valid then FDM produces a load error file, this will contain all of the records exported from FDM that have failed to load to Essbase. What this doesn't easily give you is the source metadata that makes up those failed records.
Can you provide any more info as to your current process and then we might be able to provide a few more pointers.
Hope this helps
Stuart

What table where i can find the errors in Sales Order

hi,
what table where i can find the errors in Sales Order. here's my situations, I need to create a abap report of CRM sales order not replicated to R/3 and show what's the error. I can't find the actual error in CRMD_ORDDERADM_H and CRMD_ORDERADM_I. I also tried calling program "CRM_ORDER_READ" but the program doesn't display/returns error's on header and item level.
please help.
earl g. faren

hi,
what i need is a table where i can find the sales transaction errors. I'm doing a abap report to list down sales transactions with error(s). I checked the table CRMD_ORDERADM_H and CRMD_ORDERADM_I but there's no field for transaction errors.
please help me find a table where I can link the tables above to get the specific errors for a sales transactions.
thanks alot.

Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

You're welcome.
There are a couple of issues connected to it:
http://www.vektorgarten.de/problems-align-to-pixel-grid.html
I don't think that list is complete

Ipad2 shut off after down the battery but when connect the charger my ipad2 is not storing the power in the battery and i also not finding the error code ???

ipad2 shut off after down the battery but when i connect the charger with my ipad2, its not storing the power in the battery and i also not finding the error code ???

If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options.

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Any option is there to find the error record in loop for huge amount of rec

Similar Messages

Maybe you are looking for