Any other Transaction similar to HUMO for retriving handling units .

Hi SAP GURUS ,
Please accept my thanks for the help rendered so far .
I have a Quary ,Do we have a Transaction parallel to HUMO for retrieving Handling units from stocks .
   similar to HUMO .
Thanks in Advance !!!
Adarsh

Hi ,
Thanks for your reply , but the retrieval of HU's via HUMO is showing LIst of HU's which is otherwise not possible othrewise
The easy option if the report doesnt show up once you execute is ,go for Radioa button Quick search and you will get the report
After havign raised this issue with SAP ,they have suggested us to for varients including combination of plant /material/ and storage location
otherwise ,we can as well archive the very old /unused hU's so that the report retrival through HUMO will be fast
Incidentally there is no other way except HUMO
Thanks for the reply
warm regards,
Adarsh

Similar Messages

  • Can I run F.19 without posting or do you know of any other transaction

    Can I run F.19 without posting or do you know of any other transaction.
    I run F.19 gives me information on GR/IR by PO number but it appears to want to post a batch when I run it.
    Is their another transaction that would let me reconcile GR/IR by PO number and just gives me the report without posting? Can transaction f.13 in test run achieve this.
    Thanks for your help
    AQ

    Hi,
    You can execute F.19 without posting. To do it, go to Posting tab and remove "Create posting" field. it will give you report without posting it.
    instead of Using F.13,  use FBL3N and in GL account give your GR/IR account.
    It will work....
    Regards,
    Vinod
    If helpful, Please assign the points.

  • HT204347 is there any other place that the serial # for a MacBook Pro can be found?

    Is there any other place that the serial # for a MacBook Pro can be found. I purchased this on Ebay and it functioned fine for 6 months and then it comes on with a blank screen.

    On mine at least, it's etched into the bottom cover. It's very tiny and on the screen hinge side of the casing.

  • Need help for multipule handling unit get printed out

    Hi ,
    I have multipule handling unit in case of issuing the output for selected multipule handling unit using output type . I am getting one handling unit to be printed out . Please can u suggest any configuration is recquired to get selected printed out all the select handling assigned to output type
    Any configuration is recquired to get printed out .
    process followed .
    give DO no  for vl02n (tcode)  and then pack from the menu we get handling unit need to be selected  3 or 4 handling unit then go to extra's and select output given here output type and save it .Then in nace i got only one handling unit.

    You can use the t-code VL74 for printing handling unit output.

  • Single Transfer Order for Multiple Handling Units

    I have been researchig the ability to create a single transfer order for multiple handling units.  My assumptions are if it can be done that:
    1) A transfer order can have a single source, so if the source document for the handling unit (delivery) is different, that means different transfer order
    2) A TO can have multiple materials (line items) with different destination bins and quantities per bin
    I looked at the configuration for TO Split, but it's not clear that this will handle my requirement.
    I also saw this http://aq33.com/material-management/Articles-005798.html and it also says that my requirement can't be meant.  I'm just checking before I tell my customer this cannot be done.

    Yes you are right, if Source document is different, you need to go with different TO.
    But you can choose the Handling unit split, while creating a TO itself. i.e., You can quantify the goods for each handling unit.
    Edited by: Ganesh M on Feb 29, 2012 6:20 AM

  • EWM : Confirmation of Warehouse task for a handling unit

    Hi experts,
    In EWM ,we have a requirement of confirming the open warehouse tasks in the backgound for a handling unit.
    Is there a function module that can update the confirmation of the Warehouse task and change the status from open to comfirmed.
    Kindly help us on this.
    Thanks in advance.
    Rashmi.

    Hi koen,
    I tried with the FM that you suggested...
    But somehow with the process type 'stock removal' gives an error...
    Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
    how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
    Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
    Thanks in advance,
    Rashmi.

  • Frozen 30 gb failed reset and restore, any other fix?  Or send for service?

    My wife's 30 gb iPod is frozen. Video displays menu, but touchwheel does nothing.
    Plug in to computer, iTunes launches, says that two different files could not be transferred: one "IMGP0114" that "cannot be found" and one "P1010185" that "cannot play on this device". It also says "+7 total problems".
    Tried plugging in, pressing "Menu" and "Select", Apple icon appears dim, then brightens, then returns to menu, still frozen.
    Tried "Play/Pause" and "Menu", nothing happens.
    Tried using the "restore" button in iTunes, it ran for awhile then said "Unable to restore due to unknown error" and a number, I think 1418. I tried running it again to get the number before posting here, "restore" ran for an hour and never stopped so I used Task Manager to stop iTunes.
    In iTunes, under "Help" I ran diagnostics, saved it, and printed it, it is 18 pages, pretty much Greek to me.
    Tried unplugging and replugging to computer, this time it went through a reset, the screen had been frozen on the main menu, now it is frozen on the menu where you choose a language.
    I tried searching this forum and didn't come up with any other ideas, this is the last ditch before sending it off for repair. It is out of warranty, will cost $150 to repair, you can buy a brand new one on eBay for approximately $200 or one from Apple for $250. The request-service page does not say how long it will take.
    I am logged on to my wife's account, she is a technophobe so I'm trying to help her with this.
    To sum up: Anything else to try? Would anything in the diagnostic report be of use? If we send it for repair, what is the typical turnaround time?
    Thanks
    Ross
    Dell Dimension 4550   Windows XP Pro  

    Thanks, I tried all the suggestions at that link but none of them worked. It could be the problem is a mechanical one with the touch wheel, except that it responds to the reboot maneuver of pressing "menu" & "select" simultaneously. Once rebooted, the "select" no longer functions.
    At this point we are sending it off for diagnosis and possible repair.
    Thanks again
    Ross

  • Confirming transfer order for nested handling units (picking and shipping)

    Hi
    My shipping location is HU + WM, I understand we cannot "auto confirm" Transfer Orders during creation from an outbound delivery (LT03) in the case of nested HUs because the system wants to know which exact box HUs ( The TO only specifies the pallet HU...storage unit)
    I have an automatic Pick HU created during TO confirmation but the system still prompts for me to enter  box HUs that need to be shipped/repacked on LT12. This makes logical sense but is slowing down our shipping process. Since we do not put HU labels on our boxes, the picker has to go into HUMO, enter the pallet HU, retrieve the box HUs and finally enter some of those on the TO confirmation screen to match the open quantity. In reality we don't really care what HUs he picks as long as he picks from the right pallet.
    Is there any way to automate this? If the system can pick box HUs sequentially, randomly or create further pick HUs. Anything but doesnt ask the picker to put in the box HU numbers
    OR
    Is there a way to auto confirm TOs during creation
    OR
    Is there any way to putaway box level HUs into the warehouse at the end of the production line so that Storage Unit is the box HU number and not the pallet HU number, that way it wouldn't prompt me for box HUs during picking.
    I would really appreciate your help.

    This is the standard SAP for picking nested handling units.  You can do some more reading on this by accessing the SAP note 829266.
    We had a similar problem with nested handling units - what we ended up doing was writing a BDC program that would take the nested handling unit and pack it back onto that HU instead of the pick HU after TO confirmation was done in the delivery. 
    In order to get your TO to automatically confirm, check the configuration for the storage type that its picking from - look to see if "Storage Type requires confirmation for removal/placement" is checked. 
    You can als ocheck the movement type configuration for Propose Confirmation.

  • FM for reversal handling unit

    Hi All,
    I am using SAP version 4.6c.
    I am using T.code MFHU to declare one handling unit.
    I want function module to reverse the handling unit which is declared using MFHU transaction.
    Thanks in advance.
    points assured.
    Krishna Yerram.

    Please go step by step process of finding a BAPI or a function for a transaction below
    Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this. 
    1. Find out the package of the transaction. 
    Start Va01 go to system --> status. 
    Double click on transaction 
    Package is VA 
    Open this package in SE80 
    Open business engineering-->Business object types 
    Find the BO which sounds the most appropriate 
    I would suggest BUS2032 Sales Order 
    Double click. 
    Open methods. 
    Find the released method with from data or something similar in the name 
    , Createfromdat2 
    Position the cursor in it and click the program button 
    Scroll down to find the bapi used in this method 
    With this way you can also find out programs and FM's 
    2. Start va01 go to system-->status 
    Double click transaction VA01 
    Double click on package 
    Read the application component. (this is SD-SLS Sales) 
    Then open the transaction BAPI 
    Sales and distribution>Sales>sales order 
    createfromdat2

  • Output Determination for Shipping/ Handling Units etc

    Could someone give me the steps to out put determination for outbound deliveries.
    I am trying to get the labels printed for materials and handling units. I do not want a partner function while creating the records, however it does not allow me to proceed without a partner function. I am not sure if i have understood the process right. I have got BA00 working perfect. A response will be appreciated.

    Susan,
    For output detrmination type for lets say material labelling output type MALB has acess sequence that links two tables one is related to shipping materail type and other is partner function or may be combination of partner function ship2 party and handling unit or packaging materail.
    If you dont want partner function then remove the tables in the acess sequence make it shiapping materail type as more specific entry in the acess sqeuence amt check as exculsive so that by default it should create record on the basis of shipping material.
    I hope this would not wllow you to have partner function in any of theacesssequence you are using.
    I hope this will work for u
    Thanks
    Saurabh

  • Is there any BAPI or FM to pack Materials into Handling unit in INB Deliver

    HI,
      I would appreciate if any one can throw some light or  FM or BAPI with some sample data to pack material into handling units in a inbound delivery (VL32n).
    Regards
    PRasad

    Try BAPI_HU_CREATE
    SD_DELIVERY_UPDATE_PACKING
    HU_PACKING_DELIVERY
    HU_PACKING_AND_UNPACKING
    HU_PACKING_UPDATE

  • Function Module for UNPACKING Handling Unit from Inbound Delivery

    Hello Experts,
    I am working on a RFID program to Receive goods from vendor...
    One of the steps of the program should CHANGE the quantity inside a received batch.
    To do so, I need to UNPACK the Handling Unit first... then change the quantity.
    I am using the following Function Modules to do so:
    - 'HU_GET_HUS'
    - 'V51P_FILL_GT'
    - 'HU_PACKING_AND_UNPACKING'
    - 'HU_POST'
    First 2 FM works fine...
    But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
    Have anyone done this before??
    Here's the code I've done to do some testing before putting it into my code...
    PLEEEEEEEEEEEASE HELP.
    TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
    DATA: wa_object LIKE hum_object,
          it_object TYPE TABLE OF hum_object.
    DATA: wa_v51vp LIKE v51vp,
          it_v51vp TYPE TABLE OF v51vp.
    DATA: flag LIKE v51p_select_flags.
    DATA: it_venum            TYPE STANDARD TABLE OF hum_venum,
          ef_rcode            LIKE sy-subrc,
          et_vekp             TYPE STANDARD TABLE OF vsep_s_vekp,
          et_vepo             TYPE STANDARD TABLE OF vsep_s_vepo,
          et_vevw             TYPE vsep_t_vevw,
          et_highest_level    TYPE vsep_t_venum,
          et_messages         TYPE huitem_messages_t,
          is_packing_request  TYPE vsep_s_pithu,
          es_p_request        TYPE vsep_s_pithu,
          es_item             LIKE vepovb,
          cs_header           LIKE vekpvb,
          ef_number           TYPE vpobjkey,
          et_header           TYPE STANDARD TABLE OF vekpvb,
          et_items            TYPE STANDARD TABLE OF vepovb,
          et_item_serialno    TYPE vsep_t_rserob,
          et_history          TYPE hum_history_t,
          et_highest_levels   TYPE hum_venum_t.
    DATA: wa_venum            LIKE hum_venum,
          wa_vepo             TYPE vsep_s_vepo,
          wa_vekp             TYPE vsep_s_vekp,
          wa_items            TYPE vepovb,
          wa_header           TYPE vekpvb.
    START-OF-SELECTION.
      wa_venum-venum = p_venum.
      APPEND wa_venum TO it_venum.
      CALL FUNCTION 'HU_GET_HUS'
        EXPORTING
          it_venum          = it_venum
        IMPORTING
          et_header         = et_header
          et_items          = et_items
          et_item_serialno  = et_item_serialno
          et_history        = et_history
          et_highest_levels = et_highest_levels
          et_messages       = et_messages
        EXCEPTIONS
          hus_locked        = 1
          no_hu_found       = 2
          fatal_error       = 3
          OTHERS            = 4.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE et_header INDEX 1 INTO wa_header.
      CALL FUNCTION 'V51P_FILL_GT'
        EXPORTING
          it_venum         = it_venum
        IMPORTING
          ef_rcode         = ef_rcode
          et_vekp          = et_vekp
          et_vepo          = et_vepo
          et_vevw          = et_vevw
          et_highest_level = et_highest_level
          et_messages      = et_messages
        EXCEPTIONS
          hu_locked        = 1
          no_hu_found      = 2
          fatal_error      = 3
          OTHERS           = 4.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE et_vepo INDEX 1 INTO wa_vepo.
      READ TABLE et_vekp INDEX 1 INTO wa_vekp.
      MOVE-CORRESPONDING wa_vepo TO  is_packing_request.
      is_packing_request-belnr    = wa_vepo-vbeln.
      is_packing_request-quantity = wa_vepo-vemng.
      is_packing_request-veanz    = '-1'.
      is_packing_request-meins    = wa_vepo-vemeh.
      is_packing_request-exidv    = wa_vekp-exidv.
      CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
        EXPORTING
          is_packing_request = is_packing_request
        IMPORTING
          ef_rcode           = ef_rcode
          es_p_request       = es_p_request
          es_item            = es_item
        CHANGING
          cs_header          = cs_header
        EXCEPTIONS
          missing_data       = 1
          hu_not_changeable  = 2
          not_possible       = 3
          customizing        = 4
          weight             = 5
          volume             = 6
          serial_nr          = 7
          fatal_error        = 8
          OTHERS             = 9.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'HU_POST'
        EXPORTING
          if_synchron = 'X'
          if_commit   = 'X'
        IMPORTING
          ef_number   = ef_number.
      break nunfx004.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Thanks in advance,
    Fernanda

    Hi ,
    Check this code.
    Pack componet HU to Overpack HU. *
        l_packing_req-venum = g_ovrp_venum.                  "Overpack Internal HU
        l_packing_req-exidv = g_ovrp_exidv.                  "Overpack External HU
        l_packing_req-veanz = '1'.                     "PACK Constant
        l_packing_req-sub_hu_venum = l_int_venum.
        l_packing_req-sub_hu_exidv = l_int_exidv.       "Componet External HU
        l_packing_req-velin = '3'.                      "HU Type Constant
        l_packing_req-quantity = '1.000'.
    call function 'HU_PACKING_AND_UNPACKING'
          exporting
            is_packing_request = l_packing_req
          exceptions
            missing_data       = 1
            hu_not_changeable  = 2
            not_possible       = 3
            customizing        = 4
            weight             = 5
            volume             = 6
            serial_nr          = 7
            fatal_error        = 8
            others             = 9.
        if sy-subrc <> 0.
    error
          clear: v_msgv1, v_msgv2, v_msgv3.
          v_msgv1 = text-031.
       PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
          leave to screen sy-dynnr.
        endif.
    No Errors --> POST HU
        call function 'HU_POST'
          exporting
            if_synchron = 'X'
            if_commit   = 'X'.
    plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
    Regards
    Mohinder Singh Chauhan

  • Transaction similar to MDVP, for Production Orders

    Hello.
    I have used transaction MDVP to perform a collective availability check on Planned Orders. Do you know of a similar one that gives me the same information on Production Orders?
    I have used CO24 to get a report of Missing parts, but I feel that MDVP shows information in a better way, so I'm looking for the equivalent of MDVP for Production Orders.
    Thank you!

    Hi,
    Use  code COHV
    Vishal

  • I can get into a bank's website, but i cannot do any other transactions

    i do not get any error messages. I send a message using their website, but they do not get it. I can click on the tabs, but i cannot open an account for example. It works with IE. Any suggestions please?

    Such a "add to shopping cart" button usually involves to create a cookie to store the ordered articles.<br />
    If that doesn't work then make sure that you are allowing cookies for that website (they may be using multiple domains).
    *http://kb.mozillazine.org/Cookies
    *http://kb.mozillazine.org/Websites_report_cookies_are_disabled
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Any other way to learn configuration for FICO

    Dear all gurus, I am FICO 1st level support in my company and not granted to access SPRO. I want to learn setting and configuration. Is there any standalone program or stimulator that provide the chance to access into
    SPRO? Please help and thousand thanks in advance.

    Hi,try to find  *.sim  files,wich you can open with the help of SAP tutor... It's like instruction and simulates work in system...

Maybe you are looking for