Any patch need for Grid control 10.2.0.5 to install Application management

We already have ORACLE Grid Control 10.2.0.5 (X86 version) on Linux server. Due to we have EBS, We plan to install ORACLE Application Management Pack 3.0 into Grid Control 10.2.0.5.
I heard there have patch need apply to Grid Control 10.20.05 before install Application management pack into it. Anyone know which patch?
Thanks.

when you click on the tab "Application Servers" on the far upper left site of the GridControl (right next to Hosts, Databases, ...) then
you will see of which components the Oracle Application server exists (HTTP-server, OC4J, WebCache, ...). Therefore the HTTP-server is just
part of the application server - and if the application server gets shut down it's meant that all components wil get shut down...
HTH

Similar Messages

Any patch need for OEM10.2.0.5 and R12.1.1 (X86_64)

we plan to install OEM 10.2.0.5 on X86_64 server and work with R12.1.1 EBS.
does anyone know any patch need apply for both?
Thanks.

Hi,
Please see these docs/links.
Note: 812315.1 - Oracle Application Management Pack for Oracle E-Business Suite, Release 3.0
Applications Management and Change Management Packs Certified with Enterprise Manager Grid Control Release 5
http://blogs.oracle.com/stevenChan/2009/06/amp_acmp_certified_with_emgcr5.html
Regards,
Hussein

Database limits for Grid control repository?

Document "Oracle® Database Licensing Information / 10g Release 2 (10.2)" [Part Number B14199-10] discusses the restricted use license of database for grid control repository and rman repository use.
nfrastructure Repository Databases A separate Oracle Database can be installed and used as a Recovery Manager (RMAN) repository without additional license requirements, provided that all the Oracle databases managed in this repository are correctly licensed. This repository database may also be used for the Oracle Enterprise Grid Control repository. It may not be used or deployed for other uses.
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
There is no discussion of licensing requirements for options of the database (RAC, partitioning, etc) when the database stays within these repository use restrictions. Therefore it is unclear whether the Grid Control can be configured to provide appropriate monitoring without additional licenses.

This is the reply I received from release
management:
If they have deployed an EE edition of the database
as an OEM repository, and then want to protect that
with RAC or Data Guard, or make more Secure with ASO
or Database Vault, or indeed get any of the
additional benefits any of the options provide, then
they will need to license the option.
Let me know if that is still not clear, and I'll go
back again.Thanks.
There is a minor inconsistency in their response ... they say "if deployed on EE". However, as far as I know OEM repository required VPD, which is available only on Enterprise Edition (see http://download-east.oracle.com/docs/cd/B16240_01/doc/em.102/e10953/pre-installation_req.htm#CHDGIEAD)
However, it is quite clear that 'they' are telling us that the RAC option is not inherent in the "Special Use Licensing" as described http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#CJAHFHBJ .
The implication (not necessarily a topic for this forum) is that the OEM is not guaranteed to be able to provide basic monitoring and reporting functionality without additional license fees to make OEM more highly available than the targets being monitored.
It would be nice to have the information about which Oracle products (database and app server) have included licenses with a basic Grid Control install and which require additional licenses as part of Chapter 1 of http://download.oracle.com/docs/cd/B19306_01/license.102/b40010/toc.htm (That document goes into excruciating detail about the extra packs, but ignores the basics.)
For that matter, since OEM Grid Control can not be purchased, it would be nice to have a list of products that provide license to install Grid Control, again in Chapter 1 of the Grid Control Licensing document listed above.
I appreciate your time in having dug into this.

JBOSS Plugin for Grid Control 10.2.0.5

Hi,
I have configured two 4.2.2 JBOSS instances in our 10.2.0.5 grid control. In one JBOSS instance the application is deployed as an EAR file and in the second the application is deployed as a WAR file. The JBOSS instance using the EAR file does not show our EAR file under the Applications link in Grid Control, whereas the JBOSS instance with the WAR file correctly shows our WAR file in the applications link.
Are there any restrictions with the JBOSS plugin and EAR files?
Thanks
Mark

If you have DNS to resolve the host name and ip-address of the OMS server from the agent server thats ok. And the same goes for resolving the host name and ip-address of the OMS server from the server where the agent is installed.
You say it works now. So you have DNS working, and the OMS - agent connections work fine? Right? No need to add extra entries in the hosts files.
The note should probably say: if you don't use DNS then you should add the entries in the hosts file.

Problem Load Balancing connections for Grid Control Console on port 80!

I have two OMS and I'm balancing connections for Grid Control Console using a Software Load Balancer according with "Oracle Enterprise Manager Advanced Configuration". I have success where the load balancer is listening on port different to 80. When I configure Load Balancer to listen on port 80(architecture requirement) and distribute load between the two OMS(Port 7779), when login to Enterprise Manager Console the URL on the web browser changes to the port configured for HTTP server (port 7780) wich produces an "unable to connect" error message; and this behaviour also happends in some of the internal links of Grid Control Console too. Any ideas?
Thanks in advance!
Message was edited by:
user463224

I got it working, changing the "Port" directive to 80 on httpd.conf on HTTP Server

What is Hardware/O.S. Recommendations for Grid Control server

I understand both Linux and Window servers are supported for Grid Control Installation.
However, since we are running Exadata database and cells, what would be your recommendation when we choose which O.S. we should run G.C. on?
Since the entire Exadata environment is running Linux, so, personally I'd prefer to use Linux server. But, what is your preference, and please detail your reasons.
Thank you!
Edited by: 943714 on Jul 12, 2012 9:37 AM

Grid Control (OEMGC 11g) for Windows is only available (certified) for 32 bit Windows. So you can run into memory limitations, dependeing on the number of agents/targets you will be monitoring. Second you have to install Cygwin on your Windows server if you want (or need) to be able to SSH to a Linux/Unix server. Installing Cygwin is very problematic to say the least.
If you would use OEMCC (12c), and I don't know why you wouldn't, you can install the 64 bit version for Windows however you still have to install Cygwin.
So in your case I would go for the Linux version.
Eric

A possible bug for Grid control?

Hi, Dear all,
We installed Grid control 10.2.0.1 on Redhat Linux R3 with existing database(10.2.0.4).
During the installation, we succeeded for repository creating but failed at OMS Configuration.
When I start oms in cmd line, I got the following error: the repository database can not be connected.
The description for the environment:
1. OMS server and repository database are installed on the same server, on which HA is used.
2. There are two floating IP on this machine,
IP | server name | used for |
xx.xx.xx.124 | cnsz030318 | oms server |
xx.xx.xx.80 | oem.db.paci.com.cn | repository database |
3.When we installed the oms with OUI, the repository server we input is oem.db.paci.com.cn
The problem we found:
During the installation, the repository was created successfully. But it failed at OMS configuration.
The error we got: the repository database can not be connected.
there are two lines in emoms.properities which seems strange:
oracle.sysman.eml.mntr.emdRepServer=oem.db.paic.com.cn
oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=cnsz030318.db.paic.com.cn)(PORT\=1535)))(CONNECT_DATA\=(SID\=oem10g)))
The emdRepServer is what we have input on OUI:oem.db.paic.com.cn. But for the connectDescriptor, it is changed to "cnsz030318.db.paic.com.cn", which does not exist at all!.
Now, we have worked around this problem by adding "cnsz030318.db.paic.com.cn" in the /etc/hosts.
But my question is, why the connectDescriptor set the HOST\ as cnsz030318.db.paic.com.cn? Why does it not use the name we input in OUI (oem.db.paic.com.cn)?
Maybe it is a bug for Grid control?

Did you install with "Use existing database" or "Use new database"?
I recommend that you use fully qualified domain names only!
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 7, 2009 2:24 PM

Are there any patches available for Dev 21

Hi,
We've been working with Forms50 and Reports 25 under win95 for
quite a while and have noticed occasional problems:
- A program abort due to page fault protection under win95.For
example, R30DES32 : R30LIB.dll.
- You issue compile all and get and error that forms is not
able to go to (goto error button).
- A compile error that requires login in and out and
recompile to fix.
I wonder if
- there are any patches available for Dev 21,
- i have a memory shortage problem,
- these are (especially case 1) win95 problems.
Please help will be welcomed ................!
null

Where can I find them?
thanks in advance,
Xiaolin
Jason Judge (guest) wrote:
: There are patches for the 32bit v2.1 Windows environments
dated:
: 24 June 98
: 5 August 98
: 16 September 98
: 21 Octomer 98
: 21 February 99
: and I believe a new one is just out.
: Take your pick!
: JJ
: Luis Medina (guest) wrote:
: : Hi,
: : We've been working with Forms50 and Reports 25 under win95
for
: : quite a while and have noticed occasional problems:
: : - A program abort due to page fault protection under
: win95.For
: : example, R30DES32 : R30LIB.dll.
: : - You issue compile all and get and error that forms is not
: : able to go to (goto error button).
: : - A compile error that requires login in and out and
: : recompile to fix.
: : I wonder if
: : - there are any patches available for Dev 21,
: : - i have a memory shortage problem,
: : - these are (especially case 1) win95 problems.
: : Please help will be welcomed ................!
null

Urgent-- Do we have 10.2.0.2 s/w for grid control on solairs environment

Hi,
Do we have 10.2.0.2 software for grid control management server on a sun solaris sparc environment? I see we have one for agent but we are not seeing anything w.r.t to OMS ?
Your help is appreciated!
Sravanthi.

The error we are getting is (from .err file ) :
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:243)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4494)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4443)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

Can any tag in app.xml control no-auto-startup after completing install?

InstallFolder in app.xml can work. And can any tag in app.xml controls no-auto-startup after completing install?

No, there isn't any tag to control no-auto-startup.
you will have to Uncheck the option "start application after installation" in the installation dilaog itself.

Installing Application Manager for Adobe Acrobat Pro CS5

I can't use my CS5 Acrobat Pro anymore because I am told to install Application Manager. I tried to install this but it won't work. I found only Application Manager for CS6, but not for CS5. Please help.

The error message says to install Adobe Application Manager. It says to get Application Manager and to install it.
I did that installation, but I still get the same message when I try to open Adobe Acrobat Pro.
The OS is Mac OS X 10.8.2
Acrobat Pro 10.1.2 worked before.

Installing application manager for Mac

Hi, I am trying to install application manager for Mac in order to download indesign but I keep getting the following message 'a valid installer could not be found'.
Can you please help?

Resolved it myself..
Everything now installed but Indesign won't open... Can anyone help? Thanks

Do I need license to patch agent through grid control deployment wizard

In grid control, we have license to use database diagnostics pack and database tuning pack.
I know wihtout license for provision pack, I cannot patch database homes using grid control deployment tab. But I'm wondering if I can patch grid control agent through deployment page without license for the prvision pack.
thanks

There is no management pack license needed for patching the agent. You can get clear details what link needs what packs when you click on '+' symbol (Show Management Pack Information) right to the "About Oracle Enterprise Manager" at the extreme down on OEM screen.
When you click on "Show Management Pack Information", it will show what pack needed next to every link in paranthesis. If there is no pack information mentioned next to link means, there is no license needed for that link.

Do I need Enterprise Edition license for Grid Control

We are planning on installing Oracle 10g Grid Control onto a server that does not currently have Oracle on at all. It is a 2 processor server. Using this we will be monitoring Oracle databases on 2 other servers, each of which also have 2 processors.
My question is do I need Enterprise Edition or will Standard Edition be ok? We will be using the diagnostics pack in Grid Control, and also rman on the same server. Do I definitely need Enterprise Edition?
Many thanks,
Paula.

Licence questions should be always addressed to an authorized Oracle sales representative, no one in this forum can give you an official and committed answer, you can rely on.
At least documentation shows all Management Packs require the Enterprise Edition:
http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHGFIAF
Werner

Need architecture/config details for GRID Control

Hi All,
I have scoured the Oracle documentation, but I am still interested in the details of the architecture and configuration of OEM Grid Control. I have installed version 10.2.. I want to know more about the various components, how they interact, how information flows in the configuration, how discovery and data collection works etc...
Can you point me to some resources, or maybe a person I can do on offline email conversation with???
catharine

Did you take a look at the Grid Control documentation? The links are under http://www.oracle.com/pls/db102/portal.portal_db?selected=21 and the doco for the different platforms are there.

Any patch need for Grid control 10.2.0.5 to install Application management

Similar Messages

Maybe you are looking for