Any Pentax K-7 Users Yet?

The mac OS does not yet support the K-7 PEFs, but DNG support is there.
Hope we see PEF support soon.

LawsonStone wrote:
The mac OS does not yet support the K-7 PEFs, but DNG support is there.
Hope we see PEF support soon.
What advantage do you see in using PEF?
I've been happily using the DNG format since I got my K20D

Similar Messages

Do you have any plans to add user polygon (boundary) creation ability to your great Excel Power Map program ?

Hi Microsoft Excel Power Map program team!
I looked @ your Excel Power Map program add on, and it’s great.
However everyone is looking for the ability for the user to create polygon (boundary) maps.
It should not be that hard to add this functionality onto such a great map program you already have.
For example: let’s say one has 10 latitude & longitude coordinates and he wants to see the polygon (boundary) of them on your great map. One should be able to just put those 10 latitude & longitude coordinates in an Excel sheet, fire up your Power
Map, select that it should be plotted as a polygon (boundary) and it will display on the map.
Does Microsoft have any plans to add user polygon (boundary) map creation ability to your great Excel Power Map program?
I would also like to see Excel Power map have USA census tracts built into it just like is has USA zip codes built into it. Census data is also very important as thousands and thousands of people need to display polygon (boundary) for census tracts.
Please let me know if Microsoft has any plans to add user polygon (boundary) creation ability to its great Excel Power Map program?
Thank you very much!

Hi,
Thanks for your feedback, based on your feature required, I'll move your thread to Power Map forum, there might be give us some light.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powermap&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Does Captivate 8 have any facility to allow users to see a word definition upon clicking/hovering over text in a Captivate project?

Does Captivate 8 have any facility to allow users to see a word definition upon clicking/hovering over text in a Captivate project?

You can have both clicking and hovering. But you need to add the definition manually for every such word.
Sreekanth

Are there any BI Publisher JDE users in the UK?

Hello
Are there any BI Publisher JDE users in the UK who would be willing to share their experience of using BI Publisher?
We currently run Formscape to produce all our customer facing documentation and some internal reports, that are generated via JDE and we are looking to migrate to BI Publisher.
We are currently running JDE Enterprise One 8.11 SP1 Update 2 with tools release 8.97.3.2. and looking to upgrade to tools release 8.98.4.5.
Thanks in advance
Andy

There should be no problem in the UK. You will need a plug adapter for the charger.

I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff

I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff I don't use. Any advice on what to buy?

Well, there is a whole world of free or affordable software out there like GIMP, PDPaint and similar. Otherwise if you want to stick with Adobe stuff signing up for the CC photography program would be the most cost-efficient way...
Mylenium

Any impact on Discoverer user when upgrade o oracle 8 to 10g

Does it has any impact on Discoverer user when database upgrade from 8 to 10g?

No, there is no impact on your users.
Best wishes
Michael

Is there any way to forse user to put at least 5 characters when using LOV?

Hi gurus,
I have a question.
Is there any way to force user to put at least 5 characters when using LOV?
I want user to put at least 4 characters before/when using LOV.
Is there any way to do that?
Thank you for your answers.
Nerijus

Hello,
i've tested it both on 6i and 10g and also set the lov name at runtime.
All i can say is, it does what it is supposed to do.
So you should give it one more try:
- leave the item properties NULL ( LOV name ) and NO ( Validate_From_List )
- add following code in the WVI - Trigger
IF :AUFTRAG_NEU.PN IS NOT NULL AND LENGTH ( :AUFTRAG_NEU.PN ) < 5 THEN
Show_Message ( 'Bitte 5 Zeichen eingeben' );
RAISE FORM_TRIGGER_FAILURE;
ELSIF :AUFTRAG_NEU.PN IS NULL THEN
NULL;
ELSE
SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', LOV_NAME, 'LOV_PN_PROJEKT' );
SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', VALIDATE_FROM_LIST, PROPERTY_TRUE );
IF SHOW_LOV THEN
NULL;
END IF;
SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', VALIDATE_FROM_LIST, PROPERTY_FALSE );
SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', LOV_NAME, '' );By the way, what exactly doesn't work?
Bernd

Is their any way to restrict user from overriding the graphs in SAP APO?

Dear All,
As we know, we can copy the graphs to other users using /n/sapapo/sdp_graph. But is their any way to restrict user from overriding the graph to particular user.
Scenarios:
In a project we have super user and semi-super user, whenever super user uses above t-code to copy graph to all users (he has included semi-super user id to target user list) but semi-super user does not want to override his graph by super user.
Do we have such function in APO to restrict?
Hope it is clear to understand.
Regards,
Pravin Tikar

Hi Amol,
thanks,
I have checked SP Note 400434 - Authorizations in APO demand planning Also.
Will check the authorization and will update the same.
regards,
Pravin Tikar

Do you know any other CRM where users can do this in interface?

Do you know? In CRM where you can link one record with the other based on the same value of the
field (e.g. you can use Sugar for email, but email is not linked to contacts). This is possible by doing some hacking in the database. Do you know any other CRM where users can do this in interface?

Hi Amanda,
    It could be that DSO_X is a write optimized DSO. Since a Write optimised DSO does not require any activation, it is capable of loading data much faster. Once the data is in BW, you have an exact copy of the R/3 data, so you dont need the PSA and they can be deleted on a regular basis. You have a definite performance improvement in this case.
   As you said a backup is also possible if you have a DSO. Helps in the case of LIS loads, since you already have a copy of the data in BW, you would not need to perform setup activties if you need to do so minor changes.
   It could also be that different transformations are happening at each level of DSO. You would need to check for start and update routines for exactly what changes are being made. for eg. If I need to change some records, i do it in DSO_X, if i need to change these records based on the changes made in DSO_X, i change them while loading to DSO. Further changes can be done while loading to the cube.
Hope this helps,
Regards.

I changed emails. My user ID will not let me get into my phone to do any updates, but the user id is associated with an email address that no longer exists

I changed emails. My user ID will not let me get into my phone to do any updates, but the user id is associated with an email address that no longer exists

What a mess the Apple ID, and associating emails, ID etc has got itself in
I have a new iPad but after 2 days of trying all sorts still can't sync it because it is says it is associated to the other via the iCloud
I can't use my alternate email address to setup a new Apple ID account as it says it's already used or associated, but I haven't knowingly done anything
One message says "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
I am at a complete loss on what to do

Configure CA Wily Introscope - No connection user yet defined. Select one

Hi,
Can you please assist with this one.
The basic configuration step is showing the following issue.
"No connection user yet defined. Select one"
Screen shot below. The next screen 3.1 also shows a similar error message.
Regards
Tariq

Hi Tariq,
It looks like the connection user for Wily EM in the solman_setup is missing.
Please follow the steps below :
Select a CA Wily Introscope Enterprise Manager.
Choose the User Management button. A dialog box appears.
Assign the user which is to be used to connect the CA Wily Introscope Enterprise Manager to SAP Solution Manager, For example : Admin
Enter the password of the administration user.
Choose OK.
Make sure that the above settings are saved.
Hope this helps.
Thanks & Regards,
Nisha

HT5312 This advice above is useless, as I don't get an option to send an email to my rescue address (it is verified) to reset security questions. Any suggestions fellow mac users?

This advice given above to reset security questions is useless, as I don't get the option to send an email to my rescue address (which is verified) to reset my security questions.
Any suggestions fellow mac users?

You are sure that you have a rescue email address, and not an alternate email address ? They are different addressess and settings.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

Any way to list users' roles and teams in the advanced fine list?

Hello,
Is there any way to list user's Roles and Teams in the advanced find list?
In general, I am looking for a technique to list the related entities of the main entity in the advanced find.
Thank you,

Unfortunately not. Advanced Find can only display records of one type - i.e. you can't show an entity, along with its related entities.
Also, the underlying entities that store the team membership and role membership are not available for output in Advanced Find.
Instead, you could create a report to display this data
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

I-Expenses Module. Has there been any reports created for users to query?

hi all.
Just wondering if anybody has come across any standard i-Expenses reports that have been shipped with related modules that would save us creating some ad-hoc and ORACLE reports. For example, a report that would tell us how many outstanding expense reports that have not yet been approved.
Ive found you can export data from 'Internet Expenses Auditor' but thats just for us Admin types..
thanks
Steven

Thanks for the suggestions.
The reports are to remind users of their Expense Reports rather than them remembering themselves and finding out whats to do with any outstanding ones. I think I'm going to just stick with running SQL queries periodically and emailing the users.
thanks again
Steven

Is there any way to change user operations on multiple tracks at once?

I have a complex project (99 tracks, dozens of menus and scripts). I need to make one version of this DVD for the end client (teenagers at health clinics) who will be forced to view it in a specified way, and another version for educators (staff at the clinics) who will be allowed to fast-forward and have access to a menu from which they can jump to different points in the DVD.
I have different menus to serve as "first play" for these different versions so that I can easily switch between versions when burning disc images, and I have set up GPRMs to make navigation different for the two versions automatically. My problem now is that I want to disable forward scan, next program, root menu, and title menu for the client version. As far as I can tell, I have to do that independently for every single track and menu. Bleah. This is especially annoying since the DVD is still in development, so I am continuing to change small things and will need to keep both versions up to date as I do.
Is there any way to select multiple tracks/menus and change user operations on all of them? Or any other work-around or script that could do it? I thought this would be a perfect task for the automator, but I'm not very familiar with that application and don't know how (or if it's possible) to create new actions other than the ones that are available.
Any ideas?
thanks!
Julie

Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.

Any Pentax K-7 Users Yet?

Similar Messages

Maybe you are looking for