Any plans to fix wireless networking after the 40S51U Firmware Update 2.2.5 broke it?

After the 40S51U Firmware Update 2.2.5 wireless passwords must be re-entered every time the device is powered on. It's been almost 4 months since the untested patch was released – is a fix coming?

You're the only person I can remember having that issue. You should call customer support.
- Peter

Similar Messages

Unable to connect to wireless network after 10.4.8 update

Hi Guys,
I use Macbook which I have just updated to 10.4.8. After doing the update I can no longer connect to my wireless network. On 1st boot Airport asked to update the keychain. I said yes.
Selecting my network, and entering the WPA key results in "Password for this network is incorrect" which is a load of rubbish as I can connect a PC Laptop to it perfectly. I have restarted the router, put in the key in caps and lower case, and still always the same error message.
Has anybody else experienced this? If so, does anyone know how to fix it?
Thanks,
Paul.

I just brought home a new Macbook with the 10.4.8
system software. I had to reconfigure my wireless
router to "open system" - it still required the WEP
key code, but when it was configured as an open
system instead of an automatic system it allowed the
Mac to connect.
My other computers still work fine with the new
router configuration.
Macbook Mac OS X
(10.0.x)
10.4.8 came with your new macbook? or did you update?
the only reason i ask is this was a question from a day or two ago, people were wondering if it were abnormal that new macbooks were still shipping with 10.4.6 even though 10.4.7 was out, and some predicted that once it went to 10.4.8 the shipping software would be updated to the new update

Airport won't renew DHCP on Wireless Networks (After 10.5.6 update?)

I have tested my macbook on two wireless networks (1 belkin, 1 linksys) and it connects fine to the router, but it won't assign a DHCP. When I connect it directly to the router via ethernet or to the cable modem then the internet works fine.
When I connect to a wireless network, I tried going to pref>network>advanced>tcp/ip and selecting "DHCP" and hitting renew. But it doesn't work and automatically kicks back to "DHCP with Manual IP". I have tried assigning it an IP manually on the network, 192.168.5.3 and subnet mask and all that. But that doesn't work either.
I've done power cycles on both my macbook and router. I always keep the firmwares on both routers up-to-date.
I recently updated my Leopard to 10.5.6, which apparently has an Airport update, maybe that's affecting it?

ive found that the firmwire updates screw things up. "if it aint' broke dont fix it"
_i had all kind of trouble with my airport/network settings not saving come to find out i was correct that the airport card.

No wireless Internet after the lastest security update

Everything was working fine,but since i did the latest security update,...i noticed my wireless internet connection was getting weaker and weaker and now i can't connect anymore.
I'm using a Belkin PCcard in my Powerbook G4 Titanium 867 GHZ
Connected to a Belkin Wireless router.My Belkin Card is recognized as airport express in the system profiler.
We also have a Ibook G4 800GHZ with an orginal airport extreme card , same problems too, no connection to our Belkin router.
As i wrote earlier everything was working fine.....
internet works fine with the standard UTP rj45 cable..
What i did , Repaired all the permission, restarted the router, removed the airportkext2 file as suggested on some postings etc etc (later put it back ofcourse)... but no solution...
Must be something with the latest, update I hope Apple solves this issue soon, any help from you Macwizards really appreciated.
Powerbook G4 867GHZ, Ibook G4 800GHZ Mac OS X (10.4.9)

I think the cure is to roll back the Airport kext...
http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
Thread with other links...
http://discussions.apple.com/thread.jspa?messageID=4457204&#4457204

Does Apple have any planes to fix skip count on the itouch?

When I skip a song on my itouch and sync it later, the songs I skipped don't show as being skipped. This makes almost all of my smart playlist useless! I used to buy songs every Tuesday until i noticed my Itouch was playing songs i was tired of and had skipped many times. I hope it gets fixed soon.

NO, I'm not talking about the play count. The play count works fine. I use a smart playlist that says don't play songs i have skipped in the last year. When I skip a song on my itouch then sync the itouch to my itunes playlist no songs show that they have been skipped. If i skip a song in itunes it shows that it has been skipped. I've tried skipping songs on my itouch from 1sec to 45 sec and not once does it show that a song has been skipped.
This feature has worked for years, but stoped sometime last year and hasn't worked on any of the 3 ipods that I currently own. It must be an software issue. I have seen others complain about it, but no response from Apple about it.

I fixed my 3G after the dreadful Software Update.

I did a restore phone as new ... and I started from scratch.. I think the secret is to keep your phone as empty as you can (even though thats RIDICULOUS to have to do that) but I deleted a lot of my music and the phone runs pretty fast. Not as fast as it did before the update but its SO much faster than it was. So, if you are desperate for a fast phone and can loose some of your stuff (music, etc).. I recommend it .

tell Apple: http://www.apple.com/feedback/macosx.html

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

Not Able To Print w/ Lexmark X2600 After Recent Airport Firmware Update

Hi,
So, after the recent firmware update for the Airport Extreme (802.11n), I can no longer print to my printer share. The device is recognized in Bonjour, and I use the correct driver as I did before, but when I send something to the printer, it just reads:
"Connecting to MyNetwork.local...
There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
Now, if I connect the printer directly to my computer and set it up with the same drivers over USB, it works just fine. Can I get some support on this?

Hi,
Have you tried this?
To change the printer’s network settings:
1. Open the printer's embedded Web server.
2. Click the Networking tab. For wireless settings, click Wireless. For IP settings, click IP
Configuration.
3. Change the printer's settings to match the settings of the network, then click Finish.
4. Close the printer's EWS, then disconnect the Ethernet cable from the printer.
5. The control panel lights will cycle.
The previous procedure is from the Wireless Printer User Guide for your printer.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

HT1595 My apple TV disconnects the wireless network after it logs on

My apple TV disconnects the wireless network after it logs on

Welcome to the Apple community.
Do you actually see a weak signal shown on the Apple TV when it is connected to your network. The problem may not be a weak signal, it may be interference from other networks or electrical devices.

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

Airport Express (1st generation) does not reconnect to wireless network after router is cycled on/off

Operating System: os x 10.9.1
Airport Utility 6.3.2
Airport Express 802.11n (1st generation)
Linkus router: Model WRT310Nv2, Firmware Version 2.0.01
Motorola Cable Modem: Model 2210-02, Firmware 7.7.3r5
The Airport Express (AE) is setup to join my wireless network using Airport Utility. A printer is connected to the AE with a USB cable. After the setup the AE light is green and the printer can be accessed over the wireless network.
The problem starts if the router is cycled off/on. Now the AE will not rejoin the wireless network and there is a non-flashing amber light. If the power to the AE is cycled off/on the AE reconnects to the wireless network.
This is about as handy as a screen door on a submarine.
Is it possible to see the setting of the AE the same way the modem and router settings can be accessed? Can this issue be fixed?

If they send you a replacement printer it will have ink tanks with it. You can store the ink tanks from your current printer and use them later on you "new" printer if you wish. Store them nozzle-up so they do not leak.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my messages on his phone, how can i fix this?

my fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my text messages that I type on his phone, how can i fix this? I don't see any of his, just the other way around. The icloud account is in my name.
also, would this affect being able to facetime each other?
Thanks!!

we do what your doing... we use the same ID for "Icloud".
We do NOT use the same ID for: Face time and Imessage

MacBook fails to connect to wireless network after sleep mode

My MacBook fails to reconnect to my wireless network after waking up.
After turning on my MacBook it establishes a decent connection to whatever wireless network I choose (mostly at home). When I close the lid and open it again the network connection is lost and is only reestablished after reboot.
Hopefully someone has a solution as this is very annoying.

Instead of a reboot go to your Wireless Menu icon and select "Turn Airport Off".
Wait a second and "Turn Airport On."
For me this has been a problem for about 2 years. This is much faster than a reboot!
Also see this thread - http://discussions.apple.com/thread.jspa?threadID=2383405&tstart=0
It's the same issue.

Any plans to fix wireless networking after the 40S51U Firmware Update 2.2.5 broke it?

Similar Messages

Maybe you are looking for