Any Plusnet Users

Since upgrading to the new 2.0 iPhone software 3 weeks ago, I have been unable to send or receive my e-mails via my pop account from 'Plusnet'. I wondered if anyone had the settings they could kindly pass on to me as I am slowly losing the will to live here. Apple have been unable to help, as have Plusnet so far. Thought I'd try here?!?!
Any thoughts appreciated!

Hi. Yes.
I am asking if there are any Pages users using the software Papers.
If you use the software can you add anything?
Thanks.

Similar Messages

  • Any new user creation gets: unable to log into user account error

    Sort of reposting from http://discussions.apple.com/thread.jspa?threadID=2795507&tstart=0 as that initial question was answered.
    Anyway, running an xserve managing all network accounts (only local accounts are a local admin on each system). DNS checks out and all current users can log in fine. However, it seems any new user I create keeps getting this wonderfully ambiguous error. I've tried Guest (but figured it probably interfered with the Guest Account), Student (but thought it might be interfering with a group of the same name), Guest Student, and Temp User.

    Just making sure, you have selected the home location, and then actually pressed the "Create home" button? I have missed it few times and then wondered why it is not working. Then check the home folder location that it is actually there and created successfully.
    Yeah, and then hit Save!
    Message was edited by: VincensoXFIN

  • How to check mass change(vendor) done by any particular user .

    Hi,
    What is a transaction used  to check mass change(vendor) done by any particular user .
    Thanks,
    Dharmesh

    HI
    pls try this table CDHDR
    Thanks & Regards
    Phaneendra

  • Are there any Mac user groups in central Louisiana?

    I was wondering if there are any Mac user groups in central Louisiana.
    I live in Alexandria and would like to meet any fellow Mac or i Mac users in this area.
    Also, does anybody know where to get a power supply for an older i Mac?
    Mine was built/bought new in 2008. It quit one day and will not turn on at all.
    With what help there is around here, it is a Windows area, the problem was traced
    to a dead power supply. The nearest Apple store is about 120 miles from me in
    Baton Rouge. If there is a good online source for parts, please let me know.
    Thanks for any help with either question.
    charlybear

    Here is the tool you need to find MUGs:
    http://appleusergroupresources.com/find-a-group/

  • You do not have access to any End User Layer tables

    Hello Guru's!
    I'm having an issue with connecting/using EULs on Disco 10g - I have already installed 10g Admin and configured 2 EULs and also imported the sample data - they are all owned by DISCO user -
    When I connect to http://discoserver:7778/discoverer/viewer, I get a connection screen - no connections are listed, so I click create connection - I give it a name, put in disco as my user, put my password in, put db_connect_string into the appropriate field, where db_connect_string is my actual connect string - and it gives me this error:
    Error
    Authentication Failed.
    (You do not have access to any End User Layer tables)
    I have access to these, as I'm the EUL owner - I've also tried this tho with other users that I have granted access to in the admin too (I've even granted access to these EULs to public - still no luck) - should I be using the db user and password or are there other places in 10g that I set up disco users?
    If I should be using the db user and pass, why won't it see my EULs?

    Hopefully CupJr got his answer as it's been over 2 years!
    However, if you're having the same problem ...
    1. is this an Apps EUL and you're connecting as a database user (ie: the owner of the EUL)?
    2. have you set the gateway connection info correctly (again if an Apps EUL)? - found at: Tools -> Options -> Connection.
    Russ

  • Is there any FM/User Exit exits in the name "CONVT_NO_NUMBER "

    Hi All,
    Is there any FM/User Exit exits in the name "CONVT_NO_NUMBER " 4.6C and 4.6B version?
    Thanks

    CONVT_NO_NUMBER
    is a runtime error not an FM or exit
    check this
    http://help.sap.com/saphelp_45B/helpdata/en/34/8e73686df74873e10000009b38f9b8/content.htm
    Edited by: Kartik Tarla on Apr 12, 2009 11:17 AM

  • Unable to connect End user layer /You do not have access to any end user Layer tables

    I get the following error message in Disco Admin ver 4.1.33.1.6 :
    1)Unable to connect End user layer
    In disco plus I get the follg error:
    a)You do not have access to any end user Layer tables
    This is despite the fact that my userid/passsword combination@databaseid has acess to all tables in Oracle sqlplus SQL*Plus: Release 8.0.6.0.0 -
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.7.1.0 - 64bit Production
    With the Partitioning option
    JServer Release 8.1.7.1.0 - 64bit Production
    Please reply ASAP if anyone has any ideas
    Thanks
    Gurman
    null

    Have u created a EUL for your user through Administration Edition.
    If not login as a user who has DBA rights and create EUL for your user.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Gurman Sandhu ([email protected]):
    I get the following error message in Disco Admin ver 4.1.33.1.6 :
    1)Unable to connect End user layer
    In disco plus I get the follg error:
    a)You do not have access to any end user Layer tables
    This is despite the fact that my userid/passsword combination@databaseid has acess to all tables in Oracle sqlplus SQL*Plus: Release 8.0.6.0.0 -
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.7.1.0 - 64bit Production
    With the Partitioning option
    JServer Release 8.1.7.1.0 - 64bit Production
    Please reply ASAP if anyone has any ideas
    Thanks
    Gurman
    <HR></BLOCKQUOTE>
    null

  • You don't have access to any End User Layer table

    Hi
    When I created a EUL using Discoverer admin, and also created a business area successfully, then I can't logon using same username in Discoverer desktop, My Discoverer version is 4.1.37. when I logon, I received error message read: You don't have access to any End User Layer table.
    Could someone please give me some instruction, or guide me to do something.
    .

    Hi Prathima
    You should not be able to connect to an Apps mode EUL as an end user in the end user tools.
    As for administration, you need to log in as the owner of the EUL, a database user, and then assign admin rights to an Apps account. Many companies use the SYSADMIN Apps account for this purpose. After you have assigned an Apps user to have admin rights don't forget to grant that user admin privileges over each of your business areas.,
    With this done you should then manage your Discoverer administration using the Apps account.
    Page 14 to 20 of the document called Setting up an Apps mode EUL may help. This document is available for free from my website here: http://ascbi.com/downloads/downloads.htm
    Best wishes
    Michael

  • Are there any german user? They can help me in german?

    Are there any german user? They can help me in german?

    As Linc Davis weist darauf hin:
    "Stellen Sie eine Frage in deutscher Sprache. Wenn Sie eine Antwort in Englisch (oder eine andere Sprache) und bekommen es nicht verstehen, verwenden Sie Google Translate."

  • Urgency Restrict No. of session for any particular user

    Hi All.
    Can we restrict any particular user no of session that if his nos. of session exceeded from 3 then all of his session should be killed.

    Thanks for reply.
    Currently I have a default profile for all users and resources of this profile are as follows:
    Resource Name Type Limit
    COMPOSITE_LIMIT     KERNEL     UNLIMITED
    FAILED_LOGIN_ATTEMPTS     PASSWORD     UNLIMITED
    SESSIONS_PER_USER     KERNEL     UNLIMITED
    PASSWORD_LIFE_TIME     PASSWORD     UNLIMITED
    CPU_PER_SESSION     KERNEL     UNLIMITED
    PASSWORD_REUSE_TIME     PASSWORD     UNLIMITED
    CPU_PER_CALL     KERNEL     UNLIMITED
    PASSWORD_REUSE_MAX     PASSWORD     UNLIMITED
    LOGICAL_READS_PER_SESSION KERNEL     UNLIMITED
    PASSWORD_VERIFY_FUNCTION PASSWORD     NULL
    LOGICAL_READS_PER_CALL     KERNEL     UNLIMITED
    PASSWORD_LOCK_TIME     PASSWORD     UNLIMITED
    IDLE_TIME     KERNEL     UNLIMITED
    PASSWORD_GRACE_TIME     PASSWORD     UNLIMITED
    CONNECT_TIME     KERNEL     UNLIMITED
    PRIVATE_SGA     KERNEL     UNLIMITED
    resource_limit parameter in initprod.ora file is set to FALSE.
    Now first of all I need to alter resource_limit paratmeter to TRUE with scope=both.
    Then need to create a new profile and define sessions_per_user 3.
    My question is that whether I have to define all default profile resources in the new profile or not?
    Do I need to grant create_session priviliges to every user after assigning new profile?
    Can I assign both profile to a single user?
    Brgs.
    Hassan

  • Have personal Apple ID account which allows me to download apple apps but when I go to update the apps Apple ID pops up thats not mine and cannot log in to update apps.  Brand new IPAD never any other user

    Have personal Apple ID account which allows me to download apple apps but when I go to update the apps Apple ID pops up thats not mine and cannot log in to update apps.  Brand new IPAD never any other user

    Is the AppleID listed in Settings --> Store and Settings --> iCloud the same?
    If it is a totally different ID and not a slight variation of yours, I would definitely take it back to the store. You may have bought a returned item that had been setup previously.

  • Last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion without being able to perform a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls (via i

    My last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion (via internet) without  performing a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls ?

    Reinstalling OS X doesn't affect user data, provided nothing goes wrong. But it would be very unwise to assume that nothing will go wrong, especially if you're having (unspecified) system issues. You should try to back up all data before you reinstall or do anything else. There are ways to do that, even if you're unable to boot.
    If your backups include only user files, you won't be able to access them in Setup Assistant.

  • How to get session vars of another or any current user

    We all should know that the syntax session.varname will get or set a session variable for the one user currently making the request.
    But can we write a method to get the session structure for ANY given user, when provided with a valid identifier like sessionID?
    Don't everybody all yell at once now.

    Ah HA! I knew there was a way, it was just a matter of not knowing the magic phrase to search for (kinda like learning ActionScript).
    Plain web service calls work just fine, but when my Flex app makes a Remote Object call to a cfc, my ColdFusion API always triggers onSessionStart, and has no apparent knowledge of the session variables that are already there for this Flex user (like the ones authorizing access to the API).
    I figured the fix was to provide the sessionID in my initial LogIn method, keep that on the Flex side, then pass it back in the RO call - where sessionTracker could dig up the needed info?
    Or my RO setup is just missconfigured?

  • Any ThinkTel users in Edmonton or Calgary?

    Megan for ThinkTel wrote:
    Hey Shayne - Just wanted to let you know that I'm here to answer any Qs for you as well! Happy to help get you set up on a quick demo too :) Let me know if I can help!will do... thanks Megan!

    Any ThinkTel users in Edmonton or Calgary who have time to answer some questions or maybe give a fellow spicehead a quick tour of its capabilities?
    This topic first appeared in the Spiceworks Community

  • Any WavePad users?

    Hi.
    Recently I downloaded WavePad to tidy up a few tracks by giving them a fade out instead of then ending abruptly. However, it seems I can't export them back into iTunes in the native m4a format once they've been edited. By labelling them mp3 everything works okay and iTunes accepts them.
    It is then possible to convert the mp3 files back to ACC with the button in the iTunes Advanced menu, but it all seems so cumbersome.
    My questions are:
    1. Is it me, or is there no way to get iTunes to accept the m4a format directly from WavePad, and
    2. Does it matter anyway? Is there any difference in quality between m4a and mp3 quality?
    Hope the above makes sense to a fellow WavePad user.

    Hi. Yes.
    I am asking if there are any Pages users using the software Papers.
    If you use the software can you add anything?
    Thanks.

Maybe you are looking for