Any possibility to get SYSLOG and SNMP support for the E8350?

Hi,
It would be so nice to get some more basic functionality "OR more advance ones" to be able to se what is happening on the router, what it is doing and how the status of it is!
Couldn't Linksys add support for a syslog server or snmp to the E8350 router, would help alot to determine what's going on!
Or to enable some more / better logging support to a local attached USB stick or similar...
I remember from one of the old watchguard firewalls i had, it was superb in displaying in and outgoing traffic and what was blocked..
So a more advanced live traffic view lor ogging option would be greate!
/J

I think you are at the point where you are asking for advanced tools but even though its a very pricey router, its still considered a home router. Linksys needs to evaluate their business model on this stuff. Prices more in line with SoHo Business equipment but features of a home router. To me it seems like they have crossed a line. Should reconsider their audience at this price point and open up access to more features but that may need to give out better access to the router instead of the GUI. Need to open up telnet or ssh to a shell that has those features available but would still not grant access to files that could brick the router. It couldn't be that hard.

Similar Messages

HT201363 I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Support for the Nikon D750 was introduced in the latest version of LR 5.7 and ACR 8.7 on Novemder 18th 2014.
Further updates to LR 4 were stopped when LR 5 was released on June 9th 2013. No further updates for bug fixes and new camera support.
Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced into the market in September 2014 some 15 months after further development of LR 4 was discontinued.
You can use the Adobe DNG program (free download for the package) to convert the Nef (raw) files from your Nikon D750 to the Adobe DNG format which will permit you to import those into LR 4. This is the crutch provided by Adobe to allow for the processing of raw files with outdated versions of LR and ACR.
You can also update the ACR plugin for PS CS6 to version 8.7 which can also work with the raw files from the D750. For direct support in Lightroom you will need to upgrade (paid) to version 5.7.

;-| Is it possible to get a list of Roles for the EJB Caller?

Hi,
from an EJB I can use isCallerInRole(role), however I would like to get a
list of Roles that the user is in to do DB lookups for each role...
I have an implementation under 'JBoss' which does a JNDI lookup for the
SubjectSecurityManager using java:/jaas/other and then uses that to get at
the roles...
Is there a 'standard' way of doing this?
Is there a 'SubjectSecurityManager' like beast on WebLogic?
Any help would be greatly appreciated!
Kind regards
Lewis

Hi Lewis,
I believe there is not a method for this currently but I believe it has been suggested
to our security team. Watch for this feature in a future release.
It maybe possible to write a method for this if you are using a custom realm.
Kind Regards,
Richard Wallace
Senior Develoepr Relations Engineer
BEA Support.
"Lewis Henderson" <[email protected]> wrote:
Hi,
from an EJB I can use isCallerInRole(role), however I would like to get
a
list of Roles that the user is in to do DB lookups for each role...
I have an implementation under 'JBoss' which does a JNDI lookup for the
SubjectSecurityManager using java:/jaas/other and then uses that to get
at
the roles...
Is there a 'standard' way of doing this?
Is there a 'SubjectSecurityManager' like beast on WebLogic?
Any help would be greatly appreciated!
Kind regards
Lewis

Any idea when Lightroom 4 will have support for the new Canon 5D Mark III?

I have a new Canon 5D Mark III. When can we expect support for this camera in Lightroom 4?

It's already in the DNG converter that's posted along with ACR 6.7 Beta. That indicates probably the next version.

Is it possible to sell books and not applying for the US tax?

My question is: Is it possible to sell Books using itunes connect without applying for EIN, and im not even an american citizen and I'm living in Macau SAR.

Hi..
Try FAQ's here > Apple - iTunes - Partner Programs - Sell Your Content

Is there any way to get a replacement Ribbon Cable for the Live!Dr

I had a second Li've! and Li've!Dri've hanging around the house, and gave the spare units to a friend of mine. Unfortunately I have been unable to come across the Ribbon cable. We already tried a standard IDE cable, and while it does fit, it didn't work. Does anyone know of somewhere I can get just a replacement cable? I looked on Ebay and found a card with the dri've and the cable for 0$+ shipping, but I don't need the card or the dri've, so I thought i'd try to see what I could find.
thanks

very easy yes,
Apple Superdrive
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
This one is only $35, I have it and its well made, and works on Mac
http://www.amazon.com/LG-Electronics-Portable-External-GP60NB50/dp/B00C2AMK2M/re f=sr_1_1?ie=UTF8&qid=1385882859&sr=8-1&keywords=lg+external+usb+dvd+drive

Is there any way to get a CD/DVD reader for the MacBook Air?

The only problem with the computer is that it has no way to use a CD or DVD. Is there anything I can do about that? Like getting something to hook up to my laptop or something?

very easy yes,
Apple Superdrive
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
This one is only $35, I have it and its well made, and works on Mac
http://www.amazon.com/LG-Electronics-Portable-External-GP60NB50/dp/B00C2AMK2M/re f=sr_1_1?ie=UTF8&qid=1385882859&sr=8-1&keywords=lg+external+usb+dvd+drive

ACE and ANM, Syslog and SNMP Traps

Hi guys.. another ACE/ANM question.
I configured the ACE devices to send Syslog and SNMP messages to the ANM server. But i got a couple of questions:
Whats the difference between using the:
logging history 4 (this would send logging messages as SNMP traps according to doc)
And:
snmp-server host x.x.x.x traps version 2c public
snmp-server trap-source vlan 1000
This of course I think should do the same..
The funny and weird thing, in the ANM Event viewer, I can only see syslog messages, not one snmp event.
Thanks!
Omar
PS: ACE ver A2.4
ANM Ver 4.2

Hi Omar,
Let's see if I can clarify your questions.
As you mentioned, the "logging history 4" command specifies that, syslog messages of severity 4 and higher will be sent as SNMP traps. After you configure it, you need the "snmp-server host x.x.x.x traps version 2c public" command to specify what will be the destination IP and SNMP community for these traps.
It would only make sense to use the "logging history 4" command if your monitoring application doesn't support receiving syslog messages. However, since ANM is able to get syslog messages from the ACE without issues, I would just configure a destination for syslog message instead (with "logging host x.x.x.x")
I hope this makes this point more clear.
Now, moving on to why you are not seeing any SNMP traps in your ANM, the first things you would need to check are:
-- Did you enable traps? You would use the "ACE(config)# snmp-server enable traps" command for this
-- Are traps being sent? You can use the "show snmp" command and check if the "Trap PDUs" counter increases
-- Is ANM getting these traps? This is the most complicated step. For this, I would recommend getting a traffic capture on the ANM server (if it's installed on linux) or as close as possible to it if it's a ANM appliance
I hope this helps
Daniel

[Consolidation-Locked] RAW support for the Nikon D600?

When will Adobe update RAW support for the Nikon D600?
Message title was edited by: Brett N

Lightroom 4.2 and Camera Raw 7.2 (Elements 11) are currently available and provide support for the Nikon D600.
Go to Help > (Check for) Updates to install.
Please see: http://forums.adobe.com/message/4785056

Last week ive been robbed at the airport. At night when i wanted to check my pics and my radarstatus my iCloud wasnt attached to my iPhone anymore. Is there any possibility to get my pics back?

Last week ive been robbed at the airport. At night when i wanted to check my pics and my radarstatus my iCloud wasnt attached to my iPhone anymore. Is there any possibility to get my pics back?
please please please

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Is it possible to get 15 minute appointment times on the calender without them all bunching up and being unable to follow?

Is it possible to get 15 minute appointment times on the calender without them all bunching up and being unable to follow?
I am wanting to replace all my PC's with Macs, ipads and iphones for my business.
I love the whole system but as a small Physio business, I need to be able to add 15min & 20min appointments to the callendar and share with my colleagues.
The problem I have is that they just bunch up and overlap and it becomes impossible to follow. There is no way of telling if you have any appointment spaces as it no longer shows the gaps. Also, are you able to set a default time for the appointments as it currently defaults to 1 hour (small pain in the arse but thought i'd ask while i'm here)
If there is a way to do this or if there is any other apps out there, I'm sure it would become a very useful business tool and many more small businesses would invest in Apple systems, I've talked it through with friends with other businesses and they agree.
Anybody have any solutions, or do Apple fancy making some simple upgrades to the software?
Thanks
Mark

Yep, that's basically what I'm trying to to detect JJ; which layers overlap the blue area would be the ideal result. Which objects overlap the blue layer's bounds is an ok method, but not 100% accurate (as demonstrated by your example). The bounds method does narrow down what layers I need to check it against, but it still returns 2 layers I need to then take extra time to check against for the actual overlap, which wouldn't be necessary if we can get the check more detailed.
Since a more detailed way of getting the overlaps is still being looked into, I'm thinking of using EnsilZah's and/or c.pfaffenbichler's suggestions in tandem with some code they helped me with previously (here: http://forums.adobe.com/message/6256651#6256651 ) to get the actual overlaps by process of elimination on a narrowed return result using current suggestions; at least until a better/more efficient solution comes along. I am still open to other ideas, on this topic, though.

I forgot my restriction number. Is there any possibility to get in the programm?

I forgot my restriction number! Is there any possibility to get in the program?

Hey rashad35,
Thanks for the question. Unfortunately, if you have forgotten the restrictions passcode on your device, you’ll need to restore it to factory settings:
Note: If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
via iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213
Thanks,
Matt M.

Any possibility of getting records have been updated by another user

is there any possibility of getting the error
--records have been updated by another user.please requery to see the changes.
i am getting this error when no other user connected to same data base and only one session is opened.
i am getting this error under below case.
there are 3 fields in a multiple record block.
field 1 will have the total amount.in field 2 i user can enter the percentage.and field 3 will be populated
as field 1 * field 2 /100. if user changes field 3 it back update the field 2 as field3 * 100/field 1.
there is a POST in when-new-record-instance.
the above error comes when i navigate to second record
and try to come bk and change the values in 1st record.
if any one faced this problem or have any idea of it
please let me know.

thank u all
the round option solved my problem. But still i am not clear with why it is giving when i am in the same session. Is there any link where i can get more info. on this perticular issue.steve i am not fully convinced with what u have said. can u give more details on this.
once again i thank u all.

Any possibility of getting automatic alerts for Bdocs?

Hi all,
Any possibility of getting automatic alerts for Bdocs Instead of doing manual bdoc monitoring using SMW02/SMW01.
For example Sales order is created in CRM, transferred to R/3. bcoz of some problems order is not posted successfully in R/3 . Any possibility of getting automatic alerts for Bdocs Instead of doing manual (checking) bdoc monitoring using SMW02/SMW01.
If yes, Plz let me know how to procees automatic alerts for Bdocs .
Thanks in advance,
P.V

Hi,
This is very much possible and though a very simple transaction:
Tcode: SMW00 Error Handler
Select 'Error Action for a Specific BDoc Type'
Press Execute
Press Maintain Configuration button or press F9
In the next screen, you can specify what BDOC types you want the alert to come for, what status of BDOc should the alert come for, the error action can be set as Workflow or Mail
Select 'Mail'
Select the Typr of reciopient (e.g. B Sap User)
Enter the recipient (User name)
Check Express for an alert to popup
Cehck always Process
SAVE and Execute
These settings will help you get an email and an alert popup whenever a BDOc fails
Thsi must work for you
Kindly reward with points in case helpful
Sharif

Any possibility to get SYSLOG and SNMP support for the E8350?

Similar Messages

Maybe you are looking for