Any possibility to restore Public Folders when priv1.edb priv1.stm and pub1.edb pub1.stm files was moved?

Hello, good people
(I am sorry for my english)
introduction:
MS Server 2003, Exchange 2003, Eset Endpoint Protection.
We ned some free space on hdd.
taken steps:
1. Dismounted public and private stores
2. priv1.edb priv1.stm pub1.edb pub1.stm files moved to Z:\post (Z: - network drive on NAS)
3. was created new private an public sores.
4. mounted
results:
1. Some strange behavior in email flow - messages stucks in local delivey queue, does not reaches recipients,ect.
2. Lost folder "tree" in Public folders - i mean, now there is only one folder - Internet Newsgroup
Question:
Is there any possbility to "restore" public folder ?
thanks a lot.

Hi I agree with Belinda if the issue is used size on the server perform an offline defrag on all the original DB.
Have a look here for how to:
https://social.technet.microsoft.com/Forums/en-US/7bc0be32-584a-4940-a3ad-b56aa01a6b1f/exchange-2003-reclaim-white-space?forum=exchangesvrgenerallegacy
You should maybe talk to your storage guy to see if your NAS is compliant with exchange:
http://support.microsoft.com/kb/317173
http://support.microsoft.com/kb/839687
(careful:
Supportability
If you use Exchange 2003 incorrectly with a network-attached storage product, you may experience data loss, including a total loss of the Exchange database files.

Similar Messages

Ignoring "Public Folders" when listing folders on an Exchange account?

hi-
i downloaded javamail 1.4.2 and ran the demo example "folderlist" against an exchange account i have using the "imap" protocol.
it listed all my folders correctly, including "Public Folders" and its subfolders.
i'd like to not list "Public Folders" though, and so was wondering if there is a programmatic way of ignoring this folder and any
other public folders.
when i run "folderlist" in verbose mode, i get for the "Public Folders":
Name: Public Folders
Full Name: Public Folders
URL: imap://exchange-user@exchange-host/Public Folders
Not Subscribed
Is Directory
IMAP Attributes:
\Noselect
is it appropriate to intrepret "\Noselect" as folders i don't want to include in my folder list?

Use the Store.get*Namespaces methods. You probably only want to list the personal namespaces.

If you have any possible with in the itemrender have one is label control and onther one is datagrid

Hi Friends,
                If you have any possible with in the itemrender have one is label control and onther one is data grid control.
In my application i was using list control.The list control have item renderer. In my case if i click list control of label name, the corresponding releated data of data grid need to display and list control label also.
<mx:List width="750" id="Lst_userlist" verticalScrollPolicy="off" horizontalScrollPolicy="off" rowCount="20"
labelField="sec_user_first_name+sec_user_last_name" labelFunction="BindUserName" buttonMode="true" itemClick="Click_UserList(event)" >
<mx:itemRenderer>
<fx:Component>
   <mx:VBox horizontalScrollPolicy="off" verticalScrollPolicy="off" >
     <s:Label id="lbl_userhead" name="{data.sec_user_first_name+data.sec_user_last_name}" buttonMode="true" color="#000000"/>
          <mx:DataGrid height="100%" id="membershipGrid" alternatingItemColors="[#DCDCDC,#F8F8FF]" paddingLeft="5" horizontalScrollPolicy="off" color="black"
      horizontalGridLines="false" verticalScrollPolicy="auto" verticalGridLines="false"   rowCount="{membershipArrColl.length}" rowHeight="25"
            borderSkin="{null}" showHeaders="true" borderVisible="false" dataProvider="{membershipArrColl}" width="750" visible="false" includeInLayout="false">
<mx:columns>
<mx:DataGridColumn width="180" headerText="Name" minWidth="150" sortable="true" wordWrap="true" >
   <mx:itemRenderer>
    <fx:Component>
     <mx:HBox horizontalScrollPolicy="off"   >
      <fx:Script>
       <![CDATA[
       override public function set data(value:Object):void{
       super.data = value;
       if(data.home_sec_organization_id==data.sec_organization_id)
        fileimg.load("/ist_shared/ist_images/ist_icons/Modern/gif/16/hot/user _favorites_16_hot.gif");
       else
        fileimg.load("/ist_shared/ist_images/ist_icons/Modern/gif/16/dis/user _remove_16_dis.gif");
       lbl_Gridcloumn_name.text=data.sec_user_first_name+" "+data.sec_user_last_name;
       ]]>
      </fx:Script>
      <mx:Image id="fileimg"    buttonMode="true" toolTip="This is the User's Home Organization"/>
      <s:Label id="lbl_Gridcloumn_name" width="200" buttonMode="true" textDecoration="underline" toolTip="User Menu [{data.sec_user_name}]" click="outerDocument.Click_Name(event);"    />
     </mx:HBox>
    </fx:Component>
   </mx:itemRenderer>
</mx:DataGridColumn>
<mx:DataGridColumn width="120" minWidth="110" headerText="UserName" sortable="true" dataField="sec_user_name" />
<mx:DataGridColumn width="100" minWidth="80" headerText="OrgName" dataField="sec_org_name">
</mx:columns>
</mx:DataGrid>
   </mx:VBox>
</fx:Component>
</mx:itemRenderer>
</mx:List>
Please Any One Help to me...
Thanks,
Magesh R.

Hi Friend,
The list values are display Even if i click perticular data list value ,the corresponind data grid are display in blow line data list...
can u see below sample.
Blue colotr items are List values
Green Color items are Data Grid values... If click Blue color name then only correspond data grid items are display...
Canvass360 01
Canvass360 01
canvass360-01
HR Demo
System Wide Auth Admin UT
Canvass360 01
canvass360-01
HR Demo
System Wide DocStor Admin UT
Andrew Addison
Andrew Addison
AAddison
HR Demo
System Wide Auth Admin UT
Andrew Addison
AAddison
HR Demo
System Wide DocStor Admin UT
System Admin
System Admin
Admin
HR Demo
MyOrg Administrator UT
System Admin
Admin
HR Demo
Regional Manager UT
System Admin
Admin
HR Demo
Site Manager UT
System Admin
Admin
HR Demo
System Wide Auth Admin UT
System Admin
Admin
HR Demo
System Wide DocStor Admin UT
Ben Affleck
Ben Affleck
Ben
HR Demo
Site Manager UT
Jennifer Aniston
Jennifer Aniston
JenniferA
HR Demo
Site Manager UT
Christian Bale
Christian Bale
Christian Bale
HR Demo
Site Manager UT
Brad Burgess
Brad Burgess
BBurgess
HR Demo
System Wide DocStor Admin UT
Sean Connery
Sean Connery
SConnery
HR Demo
Site Manager UT
Harrison Ford
Harrison Ford
HFord
HR Demo
Regional Manager UT
Megan Fox
Megan Fox
MFox
HR Demo
Regional Manager UT
Chuck Gamble
Chuck Gamble
CGamble
HR Demo
MyOrg Administrator UT
Chuck Gamble
CGamble
HR Demo
Regional Manager UT
Chuck Gamble
CGamble
HR Demo
Site Manager UT
Chuck Gamble
CGamble
HR Demo
System Wide Auth Admin UT
Chuck Gamble
CGamble
HR Demo
System Wide DocStor Admin UT
Chuck Gamble
CGamble
HR Demo
OnBoarding UT
Please Any One Help to me.
Thanks,
Magesh R.
Amiee Mann
AMann
HR Demo
Regional Manager UT
Jennifer Smith
JenniferSmith
HR Demo
Site Manager UT
Reese Witherspoon
Reese
HR Demo
Site Manager UT

If you have any possible with in the itemrender have one is label control and onther one is data gri

Hi Friends,
                If you have any possible with in the itemrender have one is label control and onther one is data grid control.
In my application i was using list control.The list control have item renderer. In my case if i click list control of label name, the corresponding releated data of data grid need to display and list control label also.
<mx:List width="750" id="Lst_userlist" verticalScrollPolicy="off" horizontalScrollPolicy="off" rowCount="20"
labelField="sec_user_first_name+sec_user_last_name" labelFunction="BindUserName" buttonMode="true" itemClick="Click_UserList(event)" >
<mx:itemRenderer>
<fx:Component>
   <mx:VBox horizontalScrollPolicy="off" verticalScrollPolicy="off" >
     <s:Label id="lbl_userhead" name="{data.sec_user_first_name+data.sec_user_last_name}" buttonMode="true" color="#000000"/>
          <mx:DataGrid height="100%" id="membershipGrid" alternatingItemColors="[#DCDCDC,#F8F8FF]" paddingLeft="5" horizontalScrollPolicy="off" color="black"
      horizontalGridLines="false" verticalScrollPolicy="auto" verticalGridLines="false"   rowCount="{membershipArrColl.length}" rowHeight="25"
            borderSkin="{null}" showHeaders="true" borderVisible="false" dataProvider="{membershipArrColl}" width="750" visible="false" includeInLayout="false">
<mx:columns>
<mx:DataGridColumn width="180" headerText="Name" minWidth="150" sortable="true" wordWrap="true" >
   <mx:itemRenderer>
    <fx:Component>
     <mx:HBox horizontalScrollPolicy="off"   >
      <fx:Script>
       <![CDATA[
       override public function set data(value:Object):void{
       super.data = value;
       if(data.home_sec_organization_id==data.sec_organization_id)
        fileimg.load("/ist_shared/ist_images/ist_icons/Modern/gif/16/hot/user_favorites_16_hot.gi f");
       else
        fileimg.load("/ist_shared/ist_images/ist_icons/Modern/gif/16/dis/user_remove_16_dis.gif") ;
       lbl_Gridcloumn_name.text=data.sec_user_first_name+" "+data.sec_user_last_name;
       ]]>
      </fx:Script>
      <mx:Image id="fileimg"    buttonMode="true" toolTip="This is the User's Home Organization"/>
      <s:Label id="lbl_Gridcloumn_name" width="200" buttonMode="true" textDecoration="underline" toolTip="User Menu [{data.sec_user_name}]" click="outerDocument.Click_Name(event);"    />
     </mx:HBox>
    </fx:Component>
   </mx:itemRenderer>
</mx:DataGridColumn>
<mx:DataGridColumn width="120" minWidth="110" headerText="UserName" sortable="true" dataField="sec_user_name" />
<mx:DataGridColumn width="100" minWidth="80" headerText="OrgName" dataField="sec_org_name">
</mx:columns>
</mx:DataGrid>
   </mx:VBox>
</fx:Component>
</mx:itemRenderer>
</mx:List>
Please Any One Help to me...
Thanks,
Magesh R.

Hi Friend,
The list values are display Even if i click perticular data list value ,the corresponind data grid are display in blow line data list...
can u see below sample.
Blue colotr items are List values
Green Color items are Data Grid values... If click Blue color name then only correspond data grid items are display...
Canvass360 01
Canvass360 01
canvass360-01
HR Demo
System Wide Auth Admin UT
Canvass360 01
canvass360-01
HR Demo
System Wide DocStor Admin UT
Andrew Addison
Andrew Addison
AAddison
HR Demo
System Wide Auth Admin UT
Andrew Addison
AAddison
HR Demo
System Wide DocStor Admin UT
System Admin
System Admin
Admin
HR Demo
MyOrg Administrator UT
System Admin
Admin
HR Demo
Regional Manager UT
System Admin
Admin
HR Demo
Site Manager UT
System Admin
Admin
HR Demo
System Wide Auth Admin UT
System Admin
Admin
HR Demo
System Wide DocStor Admin UT
Ben Affleck
Ben Affleck
Ben
HR Demo
Site Manager UT
Jennifer Aniston
Jennifer Aniston
JenniferA
HR Demo
Site Manager UT
Christian Bale
Christian Bale
Christian Bale
HR Demo
Site Manager UT
Brad Burgess
Brad Burgess
BBurgess
HR Demo
System Wide DocStor Admin UT
Sean Connery
Sean Connery
SConnery
HR Demo
Site Manager UT
Harrison Ford
Harrison Ford
HFord
HR Demo
Regional Manager UT
Megan Fox
Megan Fox
MFox
HR Demo
Regional Manager UT
Chuck Gamble
Chuck Gamble
CGamble
HR Demo
MyOrg Administrator UT
Chuck Gamble
CGamble
HR Demo
Regional Manager UT
Chuck Gamble
CGamble
HR Demo
Site Manager UT
Chuck Gamble
CGamble
HR Demo
System Wide Auth Admin UT
Chuck Gamble
CGamble
HR Demo
System Wide DocStor Admin UT
Chuck Gamble
CGamble
HR Demo
OnBoarding UT
Please Any One Help to me.
Thanks,
Magesh R.
Amiee Mann
AMann
HR Demo
Regional Manager UT
Jennifer Smith
JenniferSmith
HR Demo
Site Manager UT
Reese Witherspoon
Reese
HR Demo
Site Manager UT

HT1212 How do i restore my iphone when it has been disabled and can not be restored through itunes because of the error message that says "The iphone software update server could not be contacted.

How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted

Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top?

I want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ?

i want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ? I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money? If not does anyone have another suggestion how not to pay that much money to buy a new one and/ or maybe seling my old one for some money ?
Thank you would appreciate any help !

RockayaAbdel wrote:
I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money?
No. but you can sell it privately and use the proceeds towards a newer used model.

In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost.

In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost. At the time, Apple was still offering the e-chat, so I did that and the man was very helpful and it was a quick fix, so my download button turned green again, and I was able to begin the download. BUT during the download, I was kicked offline once again, and I decided to wait until I was back in the USA. I will go in to an Apple store and ask assistance, but if there is something I am missing, I'd like to try that first. Thanks in advance for any advice.

Welcome to the support forums.
Please ask this question in the Mac App Store forum where they can better assist you.

I purchased a app in the App Store but the app was under the free column but the app said $4.99 did I pay for the app? I also had 4 cents in my account but when I went to go and check again, the 4 cents was gone. So did I purchase the app?

I seen in the App Store the app imovie for $4.99 but, it was in the free column. So I tried to see of ot would let me download it, and it did, but I also had 4 dents in my account. So did I purchase that app? When I went to go and see if the 4 cents was still there, it was gone. So I had to purchase the app. But It was in the free column of the App Store. I'm confused

I was also on my ipad 4th generation on ios 7.0.4

I was installing an update when I got the error message that the MSVCR80.dll file was missing. It wants me to reload itunes. What do I do?

I was installing an update when I ogt the error message that the MSVCR80.dll file was missing and windows error 126. What do I do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Excluding public folders when enumerating Outlook folders

I have an Outlook plugin that searches all Outlook folders for certain information.
However, some users have been complaining that the plugin searches public folders as well, which are huge in certain corporations, and that in turn makes the search very slow.
I now use the following mechanism to search Outlook folders:
NameSpace nameSpace = outlookApp.GetNamespace("MAPI");
Folders accountFolders = nameSpace.Folders;
try
if (nameSpace == null || accountFolders == null)
return null;
for (int i = 1; i <= accountFolders.Count; i++)
MAPIFolder accountFolder = accountFolders.Item(i);
MailItem res = null;
try
res = ScanFolder(accountFolder, mailId, scanUI);
finally
if (accountFolder != null) Marshal.ReleaseComObject(accountFolder);
if (res != null) return res;
return null;
finally
if (accountFolders != null) Marshal.ReleaseComObject(accountFolders);
if (nameSpace != null) Marshal.ReleaseComObject(nameSpace);
I've tried to look at the MAPIFolder object, but I didn't find any flag that could help me distinguish standard folders from public folders. Is there a way to do that?
Thanks,
Jan

Read the PR_MDB_PROVIDER property (DASL name http://schemas.microsoft.com/mapi/proptag/0x34140102) using MAPIFolder.PropertyAccessor.GetProperty, convert it to hex using MAPIFolder.PropertyAccessor.BinaryToString. For the PF store objects,
PR_MDB_PROVIDER property will be pbExchangeProviderPublicGuid (78B2FA70AFF711CD9BC800AA002FC45A) - you can see that property (and others) in
OutlookSpy: click IMAPIFolder button.
Dmitry Streblechenko (MVP)
http://www.dimastr.com/redemption
Redemption - what the Outlook
Object Model should have been
Version 5.5 is now available!

Access refused in public folders when user is in a Group

Hi,
We have a Exchange 2003 server and an Exchange 2010 server
The Public folders are on the 2003.
Since 2 or 3 days, there is a access issue in juste ONE public folder: SOME users cannot access to the folder anymore if there are in a group (it asks for a login and a password -> if the user enters them, it doesn't work)
BUT the issue is just for some users not all and there are in the SAME group.
The issue is the same with both distribution or security group (and universal).
Please Help

Hi,
From your description, I recommend you follow the steps below for troubleshooting:
1. Please run the Get-PublicFolderAdministrativePermission -Identity "xxx" -User "xxx" cmdlet to check these users' permissions for the public folder.
2. If they don't have the related permissions, please use the Add-PublicFolderClientPermission -Identity "xxx" -AccessRights xxx -User xxx cmdlet to add the permissions for them.
For more information, here are some articles for your reference.
View Public Folder Administrative Permission Settings
http://technet.microsoft.com/en-us/library/aa998587(v=exchg.141).aspx
Add Permissions for Client Users to Access Public Folder Content
http://technet.microsoft.com/en-us/library/aa998834(v=exchg.141).aspx
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

My documents on my iCloud storage got automatically deleted, is there any possible way to recover them? They're nearly 1GB and very important to me.

On January 26th, I downloaded iCloud for Windows and logged in using my account which was the same with the one on my Mac. 2 days later, at 3:27 PM January 28th, my 1 GB of documents on my iCloud storage got deleted automatically. I'm saying this because at that time I was sleeping and both my Mac and my Windows PC are turned off, and I'm home alone, besides there was no suspicious login reported to me by Apple.
So is there any possible way to recover these documents? I'm a teacher and they're very important to me. My Time Machine wasn't enabled so using it is useless.
Thank you so much for any help.

Please please help me, if you know how.

HT4759 ow do you restore the iphone when there is a passcode and you do not remember it??

how do you restore the iPhone when there is a passcode on it and u for get the passcode?? help me please

You need to follow the steps in this knowledge base article, may take more than one attempt for it to work.

HT1414 My laptop and iPad was stolen. My life history is contained in photographs and music, is it possible to restore my iTunes backup onto a new laptop and iPad?

Please can you advise whether it is possible to restore I tunes back-ups onto a new Mac laptop?

If you backed up your iTunes library somewhere befroe the laptop was stolen, then yes of course it possible.
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/ht1751
The third section there talks about how to restore it.

CS6 Photoshop reads this when attempting to "Could not initialize Photoshop because the preferences file was invalid (it has been deleted). HELP!

Finally got a call this morning from an Adobe Rep and he explained to me the issue. He explained that I needed to uninstall the adobe product, in this case Photoshop CS6 and download it again and reinstall it! So, I did that and get the same message when attempting to open the newly downloaded software: "Could not initialize Photoshop because the preferences file was invalid (it has been deleted). Please, if someone could help me as soon as possible! I am very anxious to remedy this situation. Thank you!

This seems to have cropped up a lot recently. What has seemed to work so far is intentionally resetting your preferences:
Reset Preferences
1) Close the program and press Ctrl+Alt+Shift (Win)/Cmd+Option+Shift (Mac) during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB

Any possibility to restore Public Folders when priv1.edb priv1.stm and pub1.edb pub1.stm files was moved?

Similar Messages

Maybe you are looking for