Any problem if we areon ABAP SP12 and JAVA SP09 for PI 7.0

Hi All,
I was wondering being on different ABAP and Java SP's could cause any problems or compatibility issues in PI 7.0.
We are on SP12 for ABAP stack, SP09 for JAVA stack.
We are getting the following error (Red LED: Test Returned an Error) in Self-Test Status for BPE (RTW --> Component Monitoring --> Display --> Business Process Engine):
Details for 'Schedule Background Job for Packaging'
Background job for packaging is not required
Details for 'Schedule Background Job for Reorganization'
Background job for packaging is not required
In details it says background is not required and it gives Red LED in test.
Please let us know if anyone has any idea about the above two issues.
Thank You,
Indrasena Janga

Hi,
>>BPE (RTW --> Component Monitoring --> Display --> Business Process Engine):
To my knowledge different patch levels on ABAP and java stack will not cause this issue.
More over there will not be much issue when we use different patch levels on ABAP and java stack
Regards
Agasthuri Doss

Similar Messages

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

HT4623 I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestion

I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestions?

I had the same problem. My phone wasn't finding it so I tried plugging it into my laptop and it said I needed the latest iTunes which I already had.... I unplugged my phone from my laptop and did a soft reset to my phone (hold down the lock button and home button at the same time until your phone turns off) once it turns back on you should find the update... Click general... Software update. Worked for me!

IPhone 5 won't connect to wi-fi, while iPhone 4 does w/o any problem; both on same network, tablet and Airbook do ?

IPhone 5 does not connect to wi-fi, while iPhone 4 does w/o any problem; both on same network, tablet and Airbook do ?

On your 5 go to settings - general - reset - reset network settings.
Try to connect again after your phone boots back up.

Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL

Hi,
We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro.
Examples of these tasks are:
TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
We have two backend systems configured
SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
In the UWL configuration the system SAP_ECC_Workflow has been registered
In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
The system SAP_ECC_Workflow has been re-registered
The UWL cache has been cleared
However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
If we try the reverse (i.e register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow) then the reverse happens. The java tasks can be launched and the ABAP tasks cannot.
Does anyone have a solution to this problem. Surely other people have implemented both ABAP and Java webdynpro workflows?
Any help much appreciated
Andrew

Thanks a lot for all your replies..
The workitem type registration has been done already, but still it doesn't work..
But here is the actual problem...
There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
Please can anybody suggest.
Best Regards,
Sushmitha

ABAP stack and Java stack

Hi,
can anybody give me a clear idea regarding ABAP stack and Java Stack.
1. What is the concept of these both with respect to BI 7.0.
and explain with an example as i dont have any idea about these.
2. When these are used?
Thanks in advance,
Vijaya.

Hi,
Pls check these threads discussing the diff:
https://www.sdn.sap.com/irj/sdn/thread?threadID=153727
https://www.sdn.sap.com/irj/sdn/thread?threadID=89916
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="https://weblogs.sdn.sap.com/pub/wlg/6555">you</a>?
Deadline: June 15th

Any Best Practices (i.e. DOs and Don'ts) for source to target MAPPINGs?

Hi Experts,
Any Best Practices (i.e. DOs and Don'ts) for source to target MAPPINGs?
I will appreciate any hints on this.
Thanks

Hi,
I am assuming that you are asking about transformation mapping between source and target..
1) One to One mapping
2)Avoid using complex calculations
3) if any calculations required use routine instead of formulas
4)if possible avoid Using field routine (you can do start or end routine )
5)Do not map unwanted fields ( unnecessary process time,database occupant, also problem while activation of DSO data )
6)Avoid using master data read mapping option instead you can use routine to fetch the master data
7) no need of using infosurce
8)Use standard time conversions for time fields
Generally these things we need to consider while mapping..
Regards,
Satya

Are there any good third party or otherwise apps and/or plugins for imovie'11?

Are there any good third party or otherwise apps and/or plugins for imovie'11?

Re: Plugins for iMovie 11
Someone just asked this question yesterday. So I am cutting and pasting the answer From Bengt Warleby
Hi
You can not.
Nor to iMovie'08 or 09 or 11 - They do not accept any Plug-ins.
How about FinalCut Pro X - I don't know but i regard to Apple way of progress - I doubt
For iMovie up to HD6 and FinalCut Express and FinalCut Pro up to 7.0 - there are plenty.
Yours Bengt W

I have downloaded a number of songs on my old iphone 4 but it died before i had a chance to sync with my comp. now i have a new iphone and cant down load any of the songs i once had and have paid for. any ideas??

I had downloaded a number of songs on my old iphone 4, but it died before i had a chance to sync with my comp. now i have a new iphone and cant down load any of the songs i once had and have paid for. any ideas??

If you live in the US launch the iTunes store, then tap Purchases, then the "not on this phone" tab. If you don't live in the US you will have to buy them again, unless the iTunes Store support staff takes pity on you when you email them with a request for help.
BTW, how many songs can you download between daily syncs?

Are there any problems with Snow Leopard Server (Xserve) and PPC Clients

Hi,
are there any problems identified yet with Snow Leopard Server, installed on a Xserve and PPC Clients running Mac OS X Tiger and Leopard?
Currently I have a Xserve Intel running Leopard Server and about 12 Mac Minis PPC running Mac OS X Tiger and Mac OS X Leopard. The Xserve serves services like DNS, OpenDirectory, Software Update Server, NetBoot, etc. All users have Home Directories stored on the Xserve.
Now I want to install Snow Leoaprd Server on the Xserve, but I wonder if there are any problems using the PPC Clients? I have read something like this on a german website.
Thanks!

We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

Are there any problems running oracle database express 10g and iis together

Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
Does oracle database express cause any conflicts with iis (because of used ports etc)
Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

I would not expect a problem under normal circumstances.
Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

Any problems if run SQL Server 2005 and Essbase Server on 1 machine?

Hi, I would like to know if there's any problems in terms ofperformance when running SQL Server 2005 and Essbase Server on 1machine? Currently, my users are using Excel File (Lock & Send) toupload data to the Essbase Server and it took about 30 mins perexcel file upload. Application Manager is installed on client's andserver PC for adminstration. Now, I need to implement Datawarehouse and wish to installSQL Server 2005 on the current machine my Essbase Server isrunning. I will need to do simple SQL statements on the SQL Server2005 such as Update, Select, Insert etc. When comes to performance issues, will my current Essbase Serverbe affected? What if 2 users are accessing the Essbase Server andSQL Server at the same time? Will any data be lost in the midst ofextracting data? I hope someone can advise. Appreciate that. Thank you.

<blockquote>quote: <hr>Originally posted by: roy_choy Currently, my users are using Excel File (Lock & Send) to upload data to the Essbase Server and it took about 30 mins per excel file upload. I hope someone can advise. Appreciate that. Thank you.<hr></blockquote> My test server is running both Essbase and SQLServer, but I think that you have a bigger problem. If a lock and send is taking 30 minutes, you are using the wrong technology to load Essbase. You should really consider doing the load using a data load rule. If that isn't the problem, it may be that you are having a real performance problem. If you are moving enough data to require a half hour load, it should be probably be loaded from a text file, or even a spreadsheet, using a data load rule. Text file loads are a bit better than excel, especially when there are formatting issues. Lock and sends are fine for changing parameters and doing adjustments, but heavy duty data loads really work a lot better with load rules.

Firefox 17.0.1 is unbelieveably slow on my 32 bit Win 7 laptop. Prior to this, have not had any problem in years. IE 9 and 10 are fast.. What have you done here

It takes longer to load. Way longer than earlier versions.
Loading web pages is unacceptably slow, even those with no video or flash. I am a loyal and happy FF user for many years on this same laptop and Win 7 Ultimate (32 bit) platform. Till now.
IE and other browsers like Chrome are literally in another ballpark from you. I am very sorry this has happened and hope you will fox it soon...or many of your most satisfied and loyal customers like me will be gone.

I have this problem, too.
FF 17.0.1 (German version) and 32-bit Vista SP2.
FireFox stalls after URL input and "is waiting for URL...", although the sites are online and respond quickly in other browsers.
(In most cases, stall ends after 30...60 seconds, displaying desired URL.)
Moreover, during the "stall" situation: When opening a new tab or switching to an existing tab AND pressing F5 (reload) or input a new URL, the session in this tab stalls also (feels as if it is queuing "behind" the original stalling tab).
Moreover, during the "stall" situation: Firefox produces high CPU workloads (up to 100%), doing nothing (from user's point-of-view) and preventing other tasks on my PC to proceed quickly.
I tried lot of things to solve:
-> deinstall, new download, install new download
-> deactivated Addons and restart Firefox
-> always clear cache and remove cookies when exiting Firefox
Result: absolutely fruitless exercises.
Now I installed FF 16.0.1 which is working perfectly fine.
Looking forward to FF 17.0.2 or FF18 - will try again.
+++ Addendum +++
I am using ZoneAlarm V10 and its firewall. Following a suspicion I again installed 17.0.1 (for testing purposes), deactivated the ZA firewall and activated the Vista firewall. Result: also fruitless. So I again performed fallback to 16.0.1.

Connectivity between ABAP and Java Stacks for BI

Dear all,
our BI developer have to use BW Analyser for showing and changing of BW reports in Java based NetWeaver Portal.
Initially just ABAP stack (SID DCE) was installed. In Februar 2014 I installed also an Java Stack (SID JCE) and got dokumentation for
connection to ABAP Stack from SAP Support, it is attached. Further help from SAP Support is not possible, they mean that this
case belong to consultion issues.
Follow activities were sucessfully done:
1. RFC connection DMSAPERP4DEV_PORTAL_JCE was created in J2EE engine
2. RFC connection DMSAPERP4DEV_PORTAL_JCE was created for Portal
3. Portal Server Settings were maintained for portal
4. Singe Sign-In in BI was maintained
5. BI Certificate was imported from BI
6. Portal Certificae was exported from Portal
7. Portal Certificate was imported into BI.
By processing of attached SAP guide it was a problem at step 7 "Create BI System in the Portal"with the
creatig of BW system name. Under "System Administration -> System Configuration -> System Landscape"
I found no systems which are maintained with the Portal Content Studio. I take a template "SAP_R3_Dedicated"
but can not change the system name to "SAP_BW", it is still "Dedicated Application Server for R/3 System". All other
properties was set fine.
At step 8 of mentioned guide I face the next problem - there is no system names under "SAP Reference System"
under "Administration -> System Configuration -> Configuration for User Management", because the system
name on the step 7 could be not set correct, so I can not choose any.
Please advice how to proceed here.
Thank you and best regards
Stan Oberberger
Technical Consultant

Hi,
It clearly says the problem is with virtual memory. SO you need to change your virtual memory settings using configtool.
See the relevant note.940893
Make changes in the VM parameters for Bootstarp, Dispatched and the server nodes. Your -Xms should be less than equal to -Xmx.
Restart the cluster then.
It should work.
Do reward good points.

Any problem if we areon ABAP SP12 and JAVA SP09 for PI 7.0

Similar Messages

Maybe you are looking for