Any Problem in Running 9.0.4 rdf on 10.1.2 AS?

Hi all,
Recently my company is migrating the Oracle Application Server from 9.0.4 to 10.1.2 Patchset 3. I find that the rdf created by Reports Builder 9.0.4 can be run directly on AS 10.1.2. But I am not sure if there is any potential problem about this?
Should I compile them on Reports Builder 10.1.2 into rep files before running on AS 10.1.2?
Thank you.
Regards,
Rayyen

if all you care about is your users then yes and no. I don't believe an ldif dump will include a password attribute. If you don't mind recreating the passwords, then yes.

Similar Messages

  • Any problems if run SQL Server 2005 and Essbase Server on 1 machine?

    <p>Hi, I would like to know if there's any problems in terms ofperformance when running SQL Server 2005 and Essbase Server on 1machine?</p><p> </p><p>Currently, my users are using Excel File (Lock & Send) toupload data to the Essbase Server and it took about 30 mins perexcel file upload. Application Manager is installed on client's andserver PC for adminstration.</p><p> </p><p>Now, I need to implement Datawarehouse and wish to installSQL Server 2005 on the current machine my Essbase Server isrunning. I will need to do simple SQL statements on the SQL Server2005 such as Update, Select, Insert etc.</p><p> </p><p>When comes to performance issues, will my current Essbase Serverbe affected? What if 2 users are accessing the Essbase Server andSQL Server at the same time? Will any data be lost in the midst ofextracting data?</p><p> </p><p>I hope someone can advise. Appreciate that. Thank you.</p>

    <blockquote>quote:<br><hr><i>Originally posted by: <b>roy_choy</b></i><BR><BR>Currently, my users are using Excel File (Lock & Send) to<BR>upload data to the Essbase Server and it took about 30 mins per<BR>excel file upload. <BR>I hope someone can advise. Appreciate that. Thank you.</p><hr></blockquote><BR>My test server is running both Essbase and SQLServer, but I think that you have a bigger problem.<BR><BR>If a lock and send is taking 30 minutes, you are using the wrong technology to load Essbase. You should really consider doing the load using a data load rule. If that isn't the problem, it may be that you are having a real performance problem. If you are moving enough data to require a half hour load, it should be probably be loaded from a text file, or even a spreadsheet, using a data load rule. Text file loads are a bit better than excel, especially when there are formatting issues. <BR><BR>Lock and sends are fine for changing parameters and doing adjustments, but heavy duty data loads really work a lot better with load rules.

  • Are there any problems with running PPro CS4 under WIN7...?

    I've successfully created a dual boot of WIN XP Pro 64-bit and WIN 7 Professional 64-bit on my RAID10, 2-TB drive.
    I've been running numerous basic programs successfully under WIN 7. It has been totally stable for over a month and therefore I am about to transition Production Premium CS4 over to the WIN 7 partition from WIN XP where I've been running it for the past two years.
    I'm just wondering if there are any consistent problems that have surfaced with this new OS and CS4?
    I've looked through the forums and don't see much, so I have high hopes. But in case I've missed something, what should I watch out for?
    Intel DX48BT2 mobo, 2.83GHz Q9550 Core2Quad, 8gb DDR3 @1333GHz, nVidia GTX260XXX, 2TB SATA RAID10 drives, 100GB SATA scratch drive, 2 x 1TB eSATA external RAID 10 drives (LaCie & JMicron w/controller card), LG SATA Blu-Ray Burner.
    All drivers & updates are current.
    TIA,

    Having learned that with ADOBE there is always some nightmare scenario, I am stopping in my tracks until I get more information.
    I installed (non-trial) Production Premium CS4 in the Win7 partition without problem. Opened PrPro and exported media using Encore and my preferred codec. So far, so good.
    As expected, I got the "Excuse the interruption" message telling me that there were already two copies with the same serial number running - I have one on my laptop and the other is, of course, in the Win XP partition on the same computer & hard drive as this new install.
    I chose the "30 days to fix the issue" option.
    This was so I could migrate my preferences, keyboard & other presets to the Win7 install and confirm their proper operation before activation.
    PITA #1 - In XP, presets, prefs, etc., are located in "c:\Documents and Settings\Administrator\Application Data\Adobe\Premiere Pro\4.0\."
                     In Win7, they are located in "c:\Users\username\AppData\Roaming\Adobe\Premiere Pro\4.0\. This is a hidden folder, so you must go to Folder Options\View and check "Show Hidden Folders." I think this is now in Control Panel\Settings ( I got there through a Help link so I'm not sure, but it is not in the folder headers "Tools" anymore).
    PITA #2 - After copying my PrPro presets, prefs, keyboard settings, etc., to the above location, I tried to open PrPro to confirm everything. This was about an hour after my previous session. I now no longer get the "30-day option!!!" Only "Activate" "Buy a License" or "Quit!"
    PITA #3 - Since I don't know how Deactivation and Activation work, I am not about to go any further. Since both copies are on the same physical computer and hard drive, they obviously cannot both be online at the same time. I am concerned that whatever happens at Adobe's end of this will not see the deactivation or will not properly activate the new install and then I'll be left with nothing operational. If they cannot keep track of the start date of the new install and wiped out the 30-day test period in an hour, I do not have much confidence that the activation process with go so well. I think there are a limited number of activations as well, and I don't know what that applies to or how that works. I can see a scenario where I have to re-activate the Win XP partition to try and track down something and then get stuck there because I've used up my activations and can't re-activate the Win7 partition.
    Anyone have any insights on any of this...???
    TIA,

  • Keyboard Problem while running Swing App on LINUX

    Hi All,
    We have a Swing based Application running on Windows Platform. We need to run the Application on LINUX. The Application does not have any problem and runs without problems for a few minutes but after that the keyboard stops to respond inside the application. Keyboard runs fine outside the application but no key events are recognized inside the application. Mouse is working fine even after the keyboard stops responding.
    Key Points:
    �     The keyboard is a PS/2 keyboard.
    �     Read Hat Fedora 5.0 is being used.
    �     The problems occur on both KDE and GNONE.
    �     The Java Version is jdk1.5.0_09
    The application is data entry application using EJB at server side. The client UI has lot of JTables and Desktop Panes/ Internal Frames. User use ctrl+tab, ctrl+shift+tab, tab, shift+tab, and other hot keys to navigate between Components. Listeners on keyboard Focus Owner are also used. We are unable to diagnose the problem because of the undeterminable nature of the problem. The problem occurs at anytime and does not occur on any special key/ combinations press.
    Thanks and Regards,
    Nishant Saini
    http://www.simplyjava.com

    I've just installed the JDK 1.4 on my debian box. I
    can compile and run a basic Hello World app using
    System.println, but when I try to run a simple swing
    app, I get an error like:
    Exception in thread "main"
    java.lang.NoClassDefFoundError
    at java.lang.Class.forName0(Native Method)
    at java.lang.... etc, etc.
    It goes on with about 30 different classes. It
    compiles fine, with no errors, but when it comes time
    to run, that's what I get. This is what I have in my
    .bash_profile as far as environment variables go:
    export JAVA_HOME="/usr/local/j2sdk1.4.1_01"
    export PATH="$JAVA_HOME/BIN:$PATH"
    export
    CLASSPATH="$JAVA_HOME/jre/lib/:$JAVA_HOME/lib:."The code works fine in Windows, so unless there's
    something platform-specific, I don't think there's a
    problem there. I've checked to make sure I'm not
    running kaffe by accident and I'm definitely running
    the right java and javac. I'm out of ideas. Any
    suggestions would be greatly appreciated.
    -dudley
    I may just be crazy, but your PATH looks a little screwy to me. I was under the impression that the standard java installation has its executables in the 'bin' directory, not the 'BIN' directory. Unless Debian has fallen to the evil empire, then I'm fairly sure file names are case-sensitive. I don't know if that will fix your problem though. Do you compile from the command line, or do you use an IDE???

  • GTX 970 4g OV max limit...any problem with that??

    Hi, my 970 stock voltage is 1,212v and the ASIC is 65,4% (quite low) and vbios 84.04.2f.00.f1 ...in afterburner, despite there is a slider from 0 to +87v it seems like there is only 3 steps in voltage increase...for me they are:
    +0=1,212v
    +0 to +25mv=1,237v
    +25 to +87mv=1,256v
    -Is it SAFE to run the card at 1,256v 24/7 (obviously only when gaming)???
    -Why the slider is not applying the voltage in increments as slider indicates??, I mean, +37mv should be = +37mv voltage increase right??
    -And the most important thing...ONLY when voltage reach 1,256v I see in the graphs that the OV MAX LIMIT = 1 all the time (or most part) so I wonder is its SAFE to run the card with ov max limit =1???...according with the 1,256 I think there is lots of people running the card this way but not sure if ov max limit =1...
    Finally, I can run the card at 1486Mhz core (+170) and 3507Mhz memory (+0) at +25mv (1,237v) without the ov max limit at 1 should I leave the card just there???
    Many many thanks guys!!

    Quote from: watermanpc85 on 28-April-15, 19:22:29
    Thanks for the reply...I dont know hopw to upload the actual bios file but I recently updated the bios to the .186 version (latest)...now it says 84.04.36.00.f1.
    The vbios version is NV316MH.186 the numbers from gpu-z (84.04.36.00.f1) are irrelevant and do mean nothing.
    Quote from: watermanpc85 on 28-April-15, 19:22:29
    So I asume that there is not any problem by running the card with OV max limit=1 right???(as soon as the voltage is 1,256v)...anyway right now is a non sense for me because as soon as I increase voltage to 1,256v the card reaches max TDP limit and then it throtles...I would need to increase the TDP limit then...I have researched in the net but I cant find I CLEAR solution on how to increase the little 10% default...is there any "easy" way to do it??
    It just means that you reached the point where no more increases are possible.
    For increasing power limit further than is allowed by default a vbios mod is required that comes with a risk and voids warranty. If you are not familiar with vbios mods than there is no safe and easy way.

  • I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    montana girl wrote:
    I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5.  I read that I needed to update to Snow Leopard before I can update to Maverick, ...
    Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
    Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • Does BW unicode reports run on Portal 60 SP11, without any problem?

    Hi,
    Does BW unicode reports run on Portal 60 SP11, without any problems?
    Thanks,

    Hi,
    Does BW unicode reports run on Portal 60 SP11, without any problems?
    Thanks,

  • Java apps have started running very slowly since last update.  Anyone else experiencing any problems.

    There is an java app that I have run for years without any problem  Within the last few days it started running very slowly.  I went to the Apple store and ran the same app and experienced exactly the same problem 
    Yesterday I tried running this app on a Windows based machine and it ran perfectly. 
    I was all set to download the latest java when I saw that Apple supplied the java version on the MAC.
    I have run sotware updates and get results that all software is uptodate.
    Any suggestions?

    There are many people who have posted about persistent  export failures since the update. A search will uncover a number of threads just within the past month. There doesn't seem to be a pattern to these problems – and if there is common fix, I haven't heard about it.
    However, the update hasn't been a problem for me – nor presumably has it been for the majority of users.
    Russ 

  • Will Developer 6i run on Windows 7 without any problems?

    Will Developer 6i run on Windows 7 without any problems? and developer 6i supports on windows 7 or not.

    Hi,
    As a matter of fact the Dev 6i tools (form and report builder) is supported and will be supported as they are certified with E-business 11.5.x.x. version....product
    Take a look at :
    "Which Version Of Dev 6i Tools (Reports & Forms Builder) Is Supported With E-Business Suite 11.5" (Metalink Note:418667.1)
    Greetings,
    Sim

  • Does running multiple tasks on the multifunction DAQ card cuase any problems ?

    Dear all,
    I woul like to use the 6024E card for running atleast 3 tasks simultaneously, does it cause any problem ?
    Any software issues?
    I have a 3.0 GhHz HT processor with 256 MB Ram.
    Any issues with labview ?

    Satya,
    Increasing RAM will always help. Especially since you are running with only 256 MB RAM, for any type of work now days I would recommend 512 MB, if not 1GB. Now if you are getting LabVIEW to crash with a minimal application going this may indicate other problems. If you have a memory leak in your program, that could cause a crash and with 256 MB of RAM you will see a crash sooner, but it can still happen even with 512MB or 1GB. So double check for any memory leaks. Minimize the number of programs running in the back ground. If LabVIEW crashes with any kind of error, that would give us a good indication what is going on.
    -GDE

  • Is there any problem running again  "bdls" after being disconnected while r

    Hello
    I have an emergecy question
    Is there any problem running again  "bdls" after being disconnected while running it (my network connecton to laptop got broken)
    Thank you in advance

    Hi,
    Be sure that it does not continue to run. If it was really interrupted, yes, you must run it again. Otherwise you would have a lot of inconsistancies.
    Regards,
    Olivier

  • TS1702 was not having any problem running apps Now now none of the apps will run

    Was not having any problems running any apps on my ipad3 and now none of the apps will launch all apps were with obtained through apple app store the only thing different was on Sun I connected my pad to my pc for the first time to transfer some music to day was the first time I tried to run any apps since then.and that's whei encounter the problem

    Download another app - any free app is fine. See if that helps.

  • Are there any problems running oracle database express 10g and iis together

    Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
    Does oracle database express cause any conflicts with iis (because of used ports etc)
    Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

    I would not expect a problem under normal circumstances.
    Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
    So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
    Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

  • HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    Check the Adobe website for compatibility.
    Ciao.

Maybe you are looking for