Any problem leaving my MacBook on all the time for the new AppleTV?
I now have two new AppleTVs, both of which Home Share with my one MacBook.
Home Sharing only works when my MacBook is powered up and iTunes is running.
Questions are...
Is there a problem with leaving my MacBook plugged in and turned on all the time? Battery health?
Is there any way to make iTunes Home Sharing work with the cover closed?
Suggestions?
I'll clarify my questions. I am using my MacBook the same way you would use a home computer, like a MacPro or a MacMini. I have it hooked to a home TV and I use a bluetooth keyboard and magic pad to operate it. It just sits next to the TV like cable box does.
Issue #1) My MacBook is plugged in and turned on all the time, 24/7. This is not a problem for a MacPro or MacMini since neither one has a battery, so my first questions are: Will this destroy the battery's ability to maintain a charge when I do occasionally use my MacBook as a portable? Also, could this be a fire hazard since laptop batteries tend to get warm?
Issue #2) With the cover closed, the MacBook continues to operate as long as it is receiving periodic input from the keyboard or trackpad. However, once the TV that it is connected to is turned off, the MacBook goes to sleep since it's no longer hooked to a display, either it's own (cover closed) or the TV monitor (turned off). Next question is: Is there any way to keep this MacBook and iTunes operating in this condition (turned on, but cover closed and TV monitor off) so that I can continue to HomeShare with the other AppleTVs in the house?
Similar Messages
-
If I purchase Iphone 4s from apple store, Can I claim the stuff at "istudio" in my country when it has any problem? Or do I have to buy for the warranty as well? I am deciding between ordering from apple store and buying from the representative.
Warranty is ONLY valid in the country where the device was originally sold by Apple.
The ONLY exception is for devices sold in the EU, as warranty and service can be obtained in any EU country.
The warranty on the iPhone is not International. -
I've been using iMovie for a while now to make movies out of mostly travel photos and video clips. I try to vary the time for the photos from 1-4 sec., although most of them are 1-2 seconds so as to keep it short. A friend of mine who saw my most recent product said that this is too short. Any ideas out there?
I apologize for my confusion on your question. I find that depending on the principal of each photo and my target audience to determine the time frame for each photo. It seems most people get impatient with viewing one photo for more than 1-2 seconds if the photo is not complex.
If there are several things that interests the viewers in any one image, they want to look at it a second or two longer. If the movie of images is a training aid, the images may need to be more than 3 seconds. For intro's, or a trailer for a training movie, no longer than 1-2 seconds.
That was a long answer to say, generally speaking, I find 3 seconds to be an average time length. -
hey, I broke my iPhone 4 screen when I change it my phone start to turn off while my battery reach the 25% when I connect it to the charger it switched on, and the battery percentage is around 25% so it's the time for a new battery, or I need to calibrate it? thank you
There are no user serviceable parts in an iPhone. Since you
made an unauthorized repair to your iPhone, you will have to
seek assistance elsewhere.
Google or ifixit.com may provide some direction, but you can
get no help here per Terms of Service. Sorry to tell you this,
but it is what it is. -
Why AME takes twice the time for the same conversion?
Hi all!
Yesterday I made a video conversion with Adobe Media Encoder CS6 and it took about half the time it is taking now...same file, same conversion, same machine, same tasks, double time...WHY???
Thank you in advance.Please, help me. I need an immediate response so I could try to fix the problem because I need to use my laptop right away. Pls help.
-
How to get rid of the "time" for the airport connection?
Hello,
When I connect to the wireless network at my house my Airport Symbol (top right of screen by date & time, speaker volume, etc) shows the amount of time spent on the wireless network. It shows it in day, hour, minute & second. When I connect to wireless networks outside of my home, the airport symbol is there, but with no "time" next to it.
How do I set this up so that no "time" is showing but the airport symbol remains?
My buddy's "time" never shows up, but when he comes to my house it does...
I cannot seem to find the setting to remove just the time...
Please advise.
Thanks in advance.Found it... It can be changed via the drop down menu from the wireless icon in the top right part of the screen. You can get an second menu from your network name and can choose to show the time or not.
-
The time for the 2.1 release...
Do they generally release it at a set time? (for instance, midnight eastern) I'd love to be among the first to download it, but I'm guessing they will release it at a random time during the day tomorrow to avoid server overloads.
Anyone know what the SOP is for Apple's update releases?eyephownman wrote:
Do they generally release it at a set time? (for instance, midnight eastern) I'd love to be among the first to download it, but I'm guessing they will release it at a random time during the day tomorrow to avoid server overloads.
Anyone know what the SOP is for Apple's update releases?
no
Message was edited by: Mac Pro 8core - x86 -
Thanks for the amazing iOS it's great and smooth running it was worth the wait because you guys did GREAT and I'm very proud to own an iPhone thanks devs and CEOs!
Thats awesome of you to say to apple. +3 internets to you for being positive
-
Capturing the time for rendering the JSFscreen.
I have a JSF application running on WAS6.1. We have some performance issues.
The JSF rendering is taking long time to render the page. All the database operation ie querying the database and leaving the prerender method is happening so fast.
So how can we capture the time for the JSF components to render the page. Is there any way to do that?i tried to implement the phase listener.But im getting an error message in the JSP saying
JSPG0046E: Unable to locate tagfile for tag phaseListener
My action getting triggered on click of a tab. So in my JSP page I mentioned as
<ui:tab action="#{reportsView.kpiRanking_action}" binding="#{reportsView.kpiRankingStore}"
id false*/;
openPreloadWindow(); 
document.getElementById("form1:periodTypeDropDown")[2].selected = true;
savePeriodType();"
style="height: 25px; text-align: center; vertical-align: middle; width: 91px;cursor: pointer;" text="Store KPI Ranking">
<f:phaseListener binding="#{reportsView.phaseListenerImpl}" type="com.capricorn.sckpi.PhaseListenerImpl"/>
<ui:panelLayout binding="#{reportsView.layoutPanel30}" id="layoutPanel30" style="height: 335px; width: 100%; overflow-y: auto;">
<ui:table augmentTitle="false" binding="#{reportsView.storeWithinDistrictTableStore}"
id="storeWithinDistrictTableStore"
style="height: 100%; left: 0px; top: 0px; position: relative; width: 100%" title="KPI Ranking">
<ui:tableRowGroup binding="#{reportsView.storeWithinDistrictRowGroupStore}"
id="storeWithinDistrictRowGroupStore" sourceData="#{reportsView.defaultTableDataProvider}" sourceVar="currentRow"/>
</ui:table>
<ui:table augmentTitle="false" binding="#{reportsView.storeWithinDistrictTableStore1}"
id="storeWithinDistrictTableStore1"
style="height: 100%; left: 0px; top: 0px; position: relative; width: 100%" title="YTD Ranking">
<ui:tableRowGroup binding="#{reportsView.storeWithinDistrictRowGroupStore1}"
id="storeWithinDistrictRowGroupStore1" sourceData="#{reportsView.defaultTableDataProvider}" sourceVar="currentRow"/>
</ui:table>
</ui:panelLayout>
</ui:tab>
My header for JSP is
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
Please help. -
Is there a way to track the time within the clip (not sequence) that you're in?
Let me try to explain this as best I can and make sense.
I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere.
However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious.
Would like to "reset the clock" so to speak when working on individual clips within the timeline.Choose the edit points in the Source Monitor before inserting to the Sequence.
You can see the duration of the In and Outs in the Monitor . -
Can anyone communicate the time for SDK availability?
Can anyone clearly tell the time for the SDK availability? May this will help others who are waiting to download the SDK.
I came to know that, the SDK will be available from today? But still i am waiting for the link.
Thanks,
Thamizharasu SI'm waiting too..
Did you readed this blog entry? http://blogs.sun.com/mgorshenev/entry/javafx_1_0_release
Very interesting...
Bruno Grossi -
After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
Is it better to leave your macbook pro in sleep mode during the night or have it shutdown all night?
During sleep, your MacBook consumes a little part of the battery, so it won't harm leaving it in sleep mode. Also, you will be able to start using it quickly, as you don't need to wait until Mac OS X turns on.
I only recommend you to turn off the MacBook if you are not going to use it for days in order to save battery, but apart from that, you don't need to turn it off -
I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?
I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.
-
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799
Maybe you are looking for
-
Accouting FI document is not generating at sale billing (VF01)
Hi gurus, I am able to generate sales billing at sd (VF01), but Accouting document is not getting generated. Can any one help to correct this issue. Regards, RAM
-
Best way to set up Eclipse + Flex 4.5 SDK?
I have followed this tutorial to set up Eclipse with the Flex 4.5 SDK. It leaves a lot to be desired. In particular: * Setup is a pain and requires many steps * There doesn't appear to be any source code highlighting for MXML * There does not appear
-
How to download adobe flash without uninstalling
when trying to install latest adobe flash it tells to close foxfire...how do I do that?
-
Hi all , We have stock 974 Kg of X material at plant AB01 and stor.loc XY01 , 100Kg at Batch 123456 . physically the stock is not avilable. So our user wants to remove from the SAP . We want to scarp the stock for 551 mov.type . When we process th
-
Macbook hangs when unlocking only when connected to university wifi. Any suggestions?
So, when I am connected to some university's wifi, It takes longer than a minute to unlock the screen. The process goes something like this when the laptop is connected to university wifi: 1) I click to bring up the password 2) I type in the correct