Any problem with magnetic case?

Hi, my iPad leather case has magnet on the side, is there any possibility of damage to the screen or flash memory when it is exposed to the magnetic field? I use inky the wifi version which doesn't have compass.

There are many ipad, iphone, and itouch cases that use magnets. The only issue I've ever heard of is with the magnet possibly causing interference with the iphone (see link below).
I assume you are talking about the marware case. This is a popular case, and I strongly suspect that we would know by now if there was an issue. I have one on order.
http://support.apple.com/kb/HT2342?viewlocale=en_US

Similar Messages

Magnetic cases...any problems with iPhone 3GS

It seems that most horizontal cases that are any decent have magnetic closures. Does this damage the iPhone or weaken the signal while in the case?
I am looking at the Nite Ize Executive case and it states it uses a "High performance neodynium magnet closure."
http://www.niteize.com/productdetail.php?categoryid=27&productid=181
Any help would be great.

There have been several threads discussing cases with magnets causing problems. Additionally, neodymium is the strongest known magnet material. With those two in mind, it's possible that you'll have problems with this case.

What,s the reason to stop iphone 5?? Is there any problem with that phone?? Because still 4s is in market but iphone 5 is stopped.... What,s wrong with apple??

Why apple stoped iphone 5? What's the reason?? Is there any problem with that phone... Because iphone 4s is still in market.. But they stopped iphone 5.. What's wrong with iphone 5????

It was replaced by the iPhone 5C, which is essentially the same phone except for the case, better LTE converage and a larger battery.

Workstation specs -- Any problems with this system quote?

Here are the specs I have been quoted. I'm not terribly knowledgeable about hardware, does anyone see any problems with this system? I have recently started shooting and editing weddings, engagements and corporate videos. I think it may be bit more than I need, but I would much prefer that to less than I need. Any input from the more tech savvy users would be much appreciated.
Darren Breckles
65539
ASUS Sabertooth X79 ATX LGA2011 DDR3 3PCI-E16 2PCI-E SATA3 USB3.0 SLI CrossFireX Audio Motherboard [Sabertooth X79]
72374
Mushkin Enhanced Blackline Frostbyte 32GB 4X8GB PC3-12800 DDR3-1600 CL10 Quad Channel Memory Kit [994055]
64540
Noctua NH-D14 SE2011 LGA2011 Heatpipe Cooler w/ NF-P14 140mm & NF-P12 120mm PWM Fans [NH-D14 SE2011] [Reg. $89.99]
67678
Intel 520 Series 240GB 2.5in SSD MLC 25nm SATA3 Solid State Disk Flash Drive OEM [SSDSC2CW240A310] [Reg. $279.99]
4729477
8 port internal via 2X SFF-8087, LSI2208 1GB cache, 6Gb/s, RAID 0/1/10/5/50/6/60 [RS25DB080]
1
84358
MSI GeForce GTX 770 OC Twin Frozr IV 1098/1150MHZ 2GB 7GHZ GDDR5 2xDVI HDMI DP PCI-E 3.0 Video Card [N770 TF 2GD5/OC] [Reg. $429.99]
62678
ASUS BW-12B1ST Blu-Ray Writer 12X BD-R 16X DVD+R SATA Black Retail [BW-12B1ST/BLK/G/AS][Reg. $89.98]
Environmental Fee $0.75 Per Item
45275
Microsoft Windows 7 Professional Edition 64Bit DVD SP1 OEM [FQC-04649] [Reg. $153.98]
75044
Fractal Design Define R4 ATX Tower Case Black Pearl 2X5.25 8X3.5INT No PSU Front 2XUSB3.0 Audio [FD-CA-DEF-R4-BL] [Reg. $119.99]
77641
Corsair AX860 860W ATX 12V V2.31 80 Plus Platinum Modular Power Supply Active PFC 120mm Fa *IR-$10* [CP-9020044-NA] [Reg. $189.89]
49665
nMedia ZE-C118 3.5in Multi Function Panel Flash Card Reader W/USB2.0 eSATA SDHC2.0 Win 7 Black [ZE-C118 ] [Reg. $19.99]
58276
StarTech.com 3.5in Hard Drive to 5.25in Front Bay Bracket Adapter [BRACKETFDBK]
78186
Noctua NF-A14 FLX 140mm Ultra Quiet Cooling Fan 900-1200RPM 115.5M3/H 19.2DBA 3-PIN [NF-A14 FLX] [Reg. $22.99]
4
22823
Premium PC Assembly and Testing With 1 Year Limited NCIX Warranty (PRE-CONFIG WIN. OS If Purchased)
Environmental Fee $3.00 Per Item
Note: Includes extra attention to cabling, lighting installation and extra burn-in period. Recommended for windowed cases. Assembly requires an additional 4-5* business days to ship once all parts are in stock. *typical lead time (currently 2-5 business days)
1
$3.00
73920-1
NCIX 3 Year On-Site Care Coverage for PC $3000.00 - $3999.99 (22823)
89510
Intel Core i7 4930K 6 Core 3.4GHZ (3.9GHZ Turbo) 12MB Hyperthreading LGA2011 Processor No HSF [BX80633i74930K] [Reg. $649.99]
81958
Western Digital RE 2TB SATA3 7200RPM 64MB Cache 3.5in Internal Hard Drive [WD2000FYYZ] [Reg. $213.57]
Environmental Fee $0.75 Per Item
4

Very nice build list Darren!
I would have selected the Samsung 840 Pro 256GB SSD over the Intel 520, and Areca's ARC-1882i over the Intel SAS controller you list, but those are preferences not essential changes.
Regards,
Jim

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

Any problem with AMD Radeon or FirePro graphic cards?

Hi.
I know that Adobe recommend Nvidia cards for SpeedGrade, but I ask to owners of AMD cards if they have found any problems with AMD cards: bad performance, not realtime with relatively few layers, etc, etc
Which is your experience?
Thanks.

FWIW: I'm using a AMD Radeon HD 6750M (1GB RAM) on my Mac Book Pro. So far it performs fine, in some cases it even feels faster than the Quadro 4000 in my Mac Pro, but I think that has more to do with the type of projects. Mostly doing DSLR on the MBP and R3D on the Mac Pro.

Any problem with a single MySQL database used on more than one site?

I have a set of multiple sites hosted separately I'm working on. I'd like to set up a PHP/MySQL database on one site, and be able to pull data from it for completely separate sites. Seems like it shouldn't be a problem. Are there any problems with doing this I need to be aware of?

I've set up databases on three different hosts, and in all cases I could access the databases from outside the domain of the site itslef. GoDaddy is one of them, they used to restrict it, but now they give you the option when setting up a new database on your account.

HT4623 I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

This is a concern amoung many corporate users. It's going to take somekind of policy change with apple.
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number

Cp1700 - Any problems with switching existing printer with stored printer?

I am having problems reading the LCD panel for my cp1700 (not all the text shows - common problem). I have another cp1700 that I have had stored for about 5 years (saving for parts. I think this "stored" printer squeaked when printing). I considered switching the LCD panels but it looks as if this is a complicated procedure. So I am wondering if I will encounter any problems with switching the printers? I will be putting in new ink cartridges but wondering if the printheads will cause a problem after being stored for so long?

This don't completely resolve your concerns, but I've had no trouble printing from OS X 10.7 to an Epson Artisan 810 connected to a Mac running OS X 10.6.8. I may even have been able to print to it wirelessly, but I can't remember. Apple issued an update to the Epson printer drivers fairly recently, which one would hope would have addressed any issues. In any case, I'd make a bootable clone of your Mac before you upgrade. If things aren't as you hope, then you can restore the clone to your main disk drive and be back with OS X 10.6.

Any problems with??

anyone had any problems with the following set up,
875P NEO-FIS2R, corsair xms 3700pt ram ( 2 x 256mb ) and p4c 3.2
many thanks,
babyface uk

Hi RPospisil,
I'm sorry to learn that your phone has a cracked screen. I am a consumer too and I truly understand your discontent, as I would be upset if this happened to me. While dropping a phone is the most common reason for a cracked screen, screens can also break by excessive pressure while in pants pockets and others. I would not venture to guess how your phone's screen cracked, but phones can break even with a case on it. Lamentably, manufacturers' warranty is void once physical damage exists and processing an insurance replacement is the best alternative. Please visit this link http://bit.ly/07CrqPK to process your claim.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Any proble with magnet iPad

any proble with magnet iPad

If it was thought that there might be a problem then they wouldn't be included in the iPad - is there a particular issue that you are concerned about ?

Any problems with a 1TB boot drive?

My Mac Pro finally got here and I added ram & a 1 TB WD Caviar Black HD as a boot drive. The boot drive as shipped was a 640GB WD Caviar Blue but after a lot of reading, I decided to make the 1TB black the Boot 'cause it's faster & roomier. Really don't want to have to change it out in a few years due to space constraints & go through the setup process all over again.
I also have another 1 TB WD Caviar Black coming (should be here today) that I intend to use as a capture scratch disc. I still have the 640GB blue in the machine for use probably as a boot drive for windows XP Pro & all the programs I run on it in my PC at this time.
The question I have is this: is there any problem with using the 1TB black as a boot drive?
I think I recall that in the past some folks advocated a smaller boot drive, but that was before the days of dual processor, 64 MB cache, and dual heads that make the 1TB quite speedy.
I think I'll setup a PCIe external raid in the not too distant future as the archive & backup resovoir. Any difficulties with that?
Ken

Thanks for the replies, they are all helpful.
@ Jim C, glad to hear confirmation on your setup success w/ WD Blacks. My thinking was exactly the same as yours, a drive with lots of room is faster.
@David, I've always had good luck with Seagate, but only had one older WD. I'm aware WD went through some reliability problems earlier. The reviews I found on the recent WD Cav blacks all said they were better all around drives than Seagate now a days. Sorry to hear about your drive failure, time will tell for me. I'm definitely going to go with enterprise class drives on the raid and will also have an installed spare in case on goes.
Some days it's peanuts & other days it's shells. Despite marketing claims on MTBF, there will always be "premature" failures as Jim Kells points out in his reply.
Ultimately when manufacturers get a better handle on SSD's, they will be the longest lived if for no other reason than no moving parts. Performance droop on many of them now also colors the current scene, IMO. Until then it's somewhat of a crap shoot.
Ken

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

SOLVED - Has anyone had any problems with xorg 1.11.14-1?

Last night I had a double catastrophe. The first was nothing to do with Linux, but was the result of a rogue drive trashing my sata ports and killing both Arch and Windows. I managed to rescue Windows, but since Arch was running at the time (and updating) nothing I tried could bring it back. After restoring from a backup (10 days old) I started the updates again (a gargantuan 415Mb) which completed, though after a reboot X failed to start. Nothing in the logs, and no activity at all. My usual fix is to remove xorg.conf and reboot, which will generally get me to the desktop to troubleshooting stage using vesa drivers instead of catalyst, but even this couldn't get me to a desktop. I tried removing catalyst altogether from single user mode, but nothing would fix.
I restored the backup again, and did all updates except kernel, catalyst, and xorg. Everything worked fine, so next I updated catalyst - still working. A fresh backup and I updated the kernel. Still working, which means the only thing not updated at this point (and in my mind the most likely culprit for the failures) is xorg.
Now I'm not daft enough to try updating before I make a fresh backup (I've remade several tweaks to my system that got lost after the original crash), but before I go to the trouble, I wondered has anyone else had any problems with the updated xorg?
For info, I'm running on a Phenom X4 965BE, AMD 4670HD with catalyst 12.1, kernel 3.2.2-1.
TIA
Last edited by Roken (2012-02-06 00:30:59)

Any idea where the problem was?
X also fails to start for me now, when the catalyst driver is loaded. It used to work before, but after recent upgrades and changes to the system it's somehow broken.
(Same catalyst and xorg versions as you mentioned, but with kernel 3.2.4-1)
Switching to the open-source radeon driver makes X start fine, switching back to catalyst breaks it again.
Last edited by sas (2012-02-07 16:02:50)

Any problems with the recalled hard disk drives, any problems with the recalled hard disk drives

Has anyone had their defective hard drive replaced?
any problems with the Apple service or restarting the machine with a new hard drive?

See this FAQ: http://www.thexlab.com/faqs/freeingspace.html

Any problem with magnetic case?

Similar Messages

Maybe you are looking for