Any problems with LE8 handling LE7 projects?
Hi,
I'm still considering the upgrade. One of the things I've been hearing on the Pro 8 forums is that people have been having problems working on their L7 projects in L8. Any comments?
Thanks very much, you’ve really help. I think I will buy this camera. Just a couple of others points though.
The AG-DVX100B has three modes for shooting 16:9: conversion lens, AG-LA7200G; Letterbox, which I think is just chopping off the top and bottom of a 4:3 image; and squeeze mode, which squeezes the pixels, am I right in thinking this loses resolution? (refering to another thread). None of these are true anamorphic 16:9, of course. So which mode would you recommend? The conversion lens retails for about £700.
One other thing, the camera claims to cover a full wide angle lens range: extending to 4.5mm. I’m just quoting the manual now. Has anyone found the need to use a wide angle conversion lens, and if so what brand, century?
Thanks for all your help
1.5 Ghz PowerbookPC G4 Mac OS X (10.4.7)
Similar Messages
-
Any problem with AMD Radeon or FirePro graphic cards?
Hi.
I know that Adobe recommend Nvidia cards for SpeedGrade, but I ask to owners of AMD cards if they have found any problems with AMD cards: bad performance, not realtime with relatively few layers, etc, etc
Which is your experience?
Thanks.FWIW: I'm using a AMD Radeon HD 6750M (1GB RAM) on my Mac Book Pro. So far it performs fine, in some cases it even feels faster than the Quadro 4000 in my Mac Pro, but I think that has more to do with the type of projects. Mostly doing DSLR on the MBP and R3D on the Mac Pro.
-
Any problem with the BREAK ON COLUMN on REPORT statement
Hi All,
We are using the sql query output to print a summary report in our application.
We are taking a ref cursor variable and capturing all the data into this. There is a group by
Clause in the select statement that will populate the ref cursor variable. And there is a BREAK on one of the column.
While printing the ref cursor variable data after each group data first line there is a gap of 4 lines and then it is printing the next line.
The format is like this.
COLA COLB COLC
abc mno XYZ
kgh yop
ksjd djf
def mno XYZ
kgh yop
ksjd djf
Is there any problem with this format. Please advice.
Thanks in advance.
Regards,
GirijaThis should handle your problem if you are facing the same problem like i'm showing ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:01.58
satyaki>
satyaki>
satyaki>break on job
satyaki>
satyaki>
satyaki>select *
2 from emp
3 order by job;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7902 FORD ANALYST 7566 03-DEC-81 3000 20
7788 SCOTT 7566 19-APR-87 3000 20
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
7900 JAMES 7698 03-DEC-81 950 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7566 JONES 7839 02-APR-81 2975 20
7782 CLARK 7839 09-JUN-81 4450 10
7839 KING PRESIDENT 17-NOV-81 7000 10
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7844 TURNER 7698 08-SEP-81 1500 0 30
7654 MARTIN 7698 28-SEP-81 1250 1400 30
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7777 SOURAV SLS 14-SEP-08 45000 3400 10
9999 SATYAKI 7698 02-NOV-08 55000 3455 10
13 rows selected.
Elapsed: 00:00:00.42
satyaki>
satyaki>
satyaki>clear break
breaks cleared
satyaki>
satyaki>
satyaki>select *
2 from emp
3 order by job;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7902 FORD ANALYST 7566 03-DEC-81 3000 20
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
7900 JAMES CLERK 7698 03-DEC-81 950 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7782 CLARK MANAGER 7839 09-JUN-81 4450 10
7839 KING PRESIDENT 17-NOV-81 7000 10
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7777 SOURAV SLS 14-SEP-08 45000 3400 10
9999 SATYAKI SLS 7698 02-NOV-08 55000 3455 10
13 rows selected.
Elapsed: 00:00:00.21
satyaki>
satyaki>
satyaki>Regards.
Satyaki De. -
Any problems with a 1TB boot drive?
My Mac Pro finally got here and I added ram & a 1 TB WD Caviar Black HD as a boot drive. The boot drive as shipped was a 640GB WD Caviar Blue but after a lot of reading, I decided to make the 1TB black the Boot 'cause it's faster & roomier. Really don't want to have to change it out in a few years due to space constraints & go through the setup process all over again.
I also have another 1 TB WD Caviar Black coming (should be here today) that I intend to use as a capture scratch disc. I still have the 640GB blue in the machine for use probably as a boot drive for windows XP Pro & all the programs I run on it in my PC at this time.
The question I have is this: is there any problem with using the 1TB black as a boot drive?
I think I recall that in the past some folks advocated a smaller boot drive, but that was before the days of dual processor, 64 MB cache, and dual heads that make the 1TB quite speedy.
I think I'll setup a PCIe external raid in the not too distant future as the archive & backup resovoir. Any difficulties with that?
KenThanks for the replies, they are all helpful.
@ Jim C, glad to hear confirmation on your setup success w/ WD Blacks. My thinking was exactly the same as yours, a drive with lots of room is faster.
@David, I've always had good luck with Seagate, but only had one older WD. I'm aware WD went through some reliability problems earlier. The reviews I found on the recent WD Cav blacks all said they were better all around drives than Seagate now a days. Sorry to hear about your drive failure, time will tell for me. I'm definitely going to go with enterprise class drives on the raid and will also have an installed spare in case on goes.
Some days it's peanuts & other days it's shells. Despite marketing claims on MTBF, there will always be "premature" failures as Jim Kells points out in his reply.
Ultimately when manufacturers get a better handle on SSD's, they will be the longest lived if for no other reason than no moving parts. Performance droop on many of them now also colors the current scene, IMO. Until then it's somewhat of a crap shoot.
Ken -
Hello all,
I have a problem with event handling. I have two buttons in my GUI application with the same name.They are instance variables of two different objects of the same class and are put together in the one GUI.And their actionlisteners are registered with the same GUI. How can I differentiate between these two buttons?
To be more eloborate here is a basic definition of my classes
class SystemPanel{
SystemPanel(FTP ftp){ app = ftp};
FTP app;
private JButton b = new JButton("ChgDir");
b.addActionListener(app);
class FTP extends JFrame implements ActionListener{
SystemPanel rem = new SystemPanel(this);
SystemPanel loc = new SystemPanel(this);
FTP(){
add(rem);
add(loc);
pack();
show();
void actionPerformed(ActionEvent evt){
/*HOW WILL I BE ABLE TO KNOW WHICH BUTTON WAS PRESSED AS THEY
BOTH HAVE SAME ID AND getSouce() ?
In this case..it if was from rem or loc ?
} It would be really helpful if anyone could help me in this regard..
Thanks
Hari VigenshHi levi,
Thankx..
I solved the problem ..using same concept but in a different way..
One thing i wanted to make clear is that the two buttons are in the SAME CLASS and i am forming 2 different objects of the SAME class and then putting them in a GUI.THERE IS NO b and C. there is just two instances of b which belong to the SAME CLASS..
So the code
private JButton b = new JButton("ChgDir");
b.setActionCommand ("1");
wont work as both the instances would have the label "ChgDir" and have setActionCommand set to 1!!!!
Actually I have an array of buttons..So I solved the prob by writting a function caled setActionCmdRemote that would just set the action commands of one object of the class differently ..here is the code
public void setActionCommandsRemote()
for(int i = 0 ; i <cmdButtons.length ; i++)
cmdButtons.setActionCommand((cmdButtons[i].getText())+"Rem");
This just adds "rem" to the existing Actioncommand and i check it as folows in my actionperformed method
if(button.getActionCommand().equals("DeleteRem") )
deleteFileRemote();
else if(button.getActionCommand().equals("Delete") )
deleteFileLocal();Anyway thanx a milion for your help..this was my first posting and I was glad to get a prompt reply!!! -
i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..
The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries. -
SOLVED - Has anyone had any problems with xorg 1.11.14-1?
Last night I had a double catastrophe. The first was nothing to do with Linux, but was the result of a rogue drive trashing my sata ports and killing both Arch and Windows. I managed to rescue Windows, but since Arch was running at the time (and updating) nothing I tried could bring it back. After restoring from a backup (10 days old) I started the updates again (a gargantuan 415Mb) which completed, though after a reboot X failed to start. Nothing in the logs, and no activity at all. My usual fix is to remove xorg.conf and reboot, which will generally get me to the desktop to troubleshooting stage using vesa drivers instead of catalyst, but even this couldn't get me to a desktop. I tried removing catalyst altogether from single user mode, but nothing would fix.
I restored the backup again, and did all updates except kernel, catalyst, and xorg. Everything worked fine, so next I updated catalyst - still working. A fresh backup and I updated the kernel. Still working, which means the only thing not updated at this point (and in my mind the most likely culprit for the failures) is xorg.
Now I'm not daft enough to try updating before I make a fresh backup (I've remade several tweaks to my system that got lost after the original crash), but before I go to the trouble, I wondered has anyone else had any problems with the updated xorg?
For info, I'm running on a Phenom X4 965BE, AMD 4670HD with catalyst 12.1, kernel 3.2.2-1.
TIA
Last edited by Roken (2012-02-06 00:30:59)Any idea where the problem was?
X also fails to start for me now, when the catalyst driver is loaded. It used to work before, but after recent upgrades and changes to the system it's somehow broken.
(Same catalyst and xorg versions as you mentioned, but with kernel 3.2.4-1)
Switching to the open-source radeon driver makes X start fine, switching back to catalyst breaks it again.
Last edited by sas (2012-02-07 16:02:50) -
Problem with Intrastat handling (MEIS)
Dear SCN Members,
we have a problem with Intrastat handling:
Our company is in Great Britain (example VAT-No. GB123456789)
We have a vendor in Switzerland (no EU VAT-No.), who has a fiscal representative in Belgium (example VAT-No. BE1234567890).
Both have a separate vendor number (swiss vendor: 23176, belgian vendor: 33179).
We created a partner "WL" (Goods Supplier) in the vendor master data of the swiss vendor and assigend the belgian vendor number. The swiss vendor master data has nothing filled in the "VAT Reg. No." field (LFA1-STCEG) of the vendor master data. The belgian vendor number has the belgian VAT-No. filled in the "VAT Reg. No." field (LFA1-STCEG) of the vendor master data.
The partner "WL" is automatically taken into the purchase order header partners and is also taken into account for the goods receipt posting.
After I have posted the vendor invoice, the line is shown in transaction MEIS, but the incompletion log is always showing message no. EIP029:
The system did not find the VAT registration number of vendor 23176.
In my opinion, the VAT no. of the fiscal representative (BE1234567890) should be taken into account for the Intrastat reporting, as the swiss vendor has no VAT number. We have not yet managed to get the belgian VAT into the Intrastat report.
Could you please clarify. Thanks in advance for your help!Hi,
Please refer the KBA: 1988909 - MEIS: Error EIP 029 "The system did not find the VAT registration number of vendor The reason and the solution is well explained in the KBA. You may change the configuration as explained in the KBA and test again.
Regards,
AKPT -
Has anyone had their defective hard drive replaced?
any problems with the Apple service or restarting the machine with a new hard drive?See this FAQ: http://www.thexlab.com/faqs/freeingspace.html
-
If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE -
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol -
Why apple stoped iphone 5? What's the reason?? Is there any problem with that phone... Because iphone 4s is still in market.. But they stopped iphone 5.. What's wrong with iphone 5????
It was replaced by the iPhone 5C, which is essentially the same phone except for the case, better LTE converage and a larger battery.
-
When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm using a Mac with Mountain Lion OS. Any solutions?
Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN -
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin -
i have a Mac OS X 10.6.8 and wish to upgrade to newest version (yosemite?)...any problems with that?
Read the system requirements for Yosemite.
Maybe you are looking for
-
Recently my iphone 4 has been acting dumb
i'm not sure why it is doing all this things but here is a list of what is recently has been doing: when i charge it, the screen goes completely black and this little white loading circle is in the middle and it does that for ages and finally loads.
-
Best way to sync with this setup?
I have a shared external drive on my AEBS at home that I keep my iTunes library on, music, movies, tv shows, etc. I want all my media to be available to my Apple TV. On my MacBook Pro, I need be able to sync my iPhone calender, email, non media type
-
Hi, i'm building a webapp to simply allow the user to enter his or her details which will be submitted with all the details stored in the bean. When deciding to either make properties such as age or telephone number as string or int in a bean, i read
-
App, Could not complete purchase
Greetings, Got this message after downloading. (Purchase payment done). How to fix this and be able to download again? Thank you!
-
Have done the recovery discs but HELP!!! Windows could no start because the following file is missing or corrupt: \WINDOWS\system32\config\system No option to repair??? have done a memtest and it passed Its a tecra A2 model number: PTA20E