Any problems with RH10 demo on the same machine as RH9?

I need to install the RH10 demo with captivate on a machine with RH9. Will that create any problems?

Both will run OK but Rh10 will become the version that opens when you double click an XPJ file. If you later uninstall Rh10 it may not revert to Rh## but a quick reinstall should fix that.
If you try to open an earlier version project, you will get a warning and the option to back out without upgrading the project. There are some hacks for reverting to an earlier version but they are not recommended.
Use copies of your Rh## projects to work in 10 while you experiment.
Ideally, use another machine.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Any problems with WL 11gR1 on the same box as WL 10MP1?

I currently have WebLogic 10MP1 installed on my laptop. I'd like to install WebLogic 11gR1 (10.3.1) on the same box and do some experiments with it, without impacting in any way my 10MP1 installation. In the past, it's usually been very safe to install two versions at the same time in the same BEA distribution, and neither will conflict with each other, although there have been a couple of small exceptions to that. Before I run the 11gR1 installer, I want to be sure I know of any possible issues. Can anyone say whether they've had no issues with installing 10MP1 and 11gR1 at the same time?

I have not had that explicitly that combination yet. I have 10.3 and 10.3.1 in the same machine but in separate MIDDLEWARE_HOME directories and have had no issues.

HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

Check the Adobe website for compatibility.
Ciao.

HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words.

Problem with 2 physical standbys on same machine

Hi,
I've set up the Dataguard with one primary on machine A and 2 physical standbys on the same machine B.
Note: the Dataguard worked fine with one primary and one phy standby on the separate machines.
The problem I have is the Redo Logs can only applied to either one of the phy stdbys.
Which one started 1st, then that phy stdby can apply the Redo Log.
The redo logs have been transferred to both phy stdbys successfully but ONLY one phy stdby can apply the Redo Logs.
Anyone got this experience, pls point out. Thanks.
QN
The error in the alert file is below:
ORA-01110: data file 1: '/u01/DG/system01.dbf'
ORA-27086: unable to lock file - already in use
SVR4 Error: 11: Resource temporarily unavailable
Additional information: 8
Additional information: 3619
Wed Aug 15 14:22:13 2007
Errors in file /oracle/admin/LSSTDBY/bdump/lsstdby_dbw0_4574.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: '/u01/DG/undotbs01.dbf'
ORA-27086: unable to lock file - already in use
SVR4 Error: 11: Resource temporarily unavailable
Additional information: 8
Additional information: 3619
Wed Aug 15 14:22:13 2007
Errors in file /oracle/admin/LSSTDBY/bdump/lsstdby_dbw0_4574.trc:
ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
ORA-01110: data file 3: '/u01/DG/sysaux01.dbf'
ORA-27086: unable to lock file - already in use
SVR4 Error: 11: Resource temporarily unavailable
Additional information: 8
Additional information: 3619
MRP0: Background Media Recovery terminated with error 1110
Wed Aug 15 14:22:13 2007
Errors in file /oracle/admin/LSSTDBY/bdump/lsstdby_mrp0_4616.trc:
ORA-01110: data file 1: '/u01/DG/system01.dbf'
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '/u01/DG/system01.dbf'
Wed Aug 15 14:22:13 2007
Errors in file /oracle/admin/LSSTDBY/bdump/lsstdby_mrp0_4616.trc:
ORA-01110: data file 1: '/u01/DG/system01.dbf'
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '/u01/DG/system01.dbf'

Thanks a lot for asking me questions. Thus I understand my problem.
I checked the locations of datafiles of both phy stdbys, I saw they use the same datafiles.
Because when I created the phy standby, I shutdown the pri, copy a COLD backup of the pri to the stdby, then startup mount db. This is not right. The directories of the datafiles are not the same.
I'm not clear about how to create a phy stdby if their directories of the datafiles are different.
Thanks.

Sharing iMove Projects Libraries with different users on the same machine

I was wonder how two different users on the same machine can
share project libraries. Some Context:
My daughter has some finished projects in her project library and
I either want to import those project into my library or share them
so both user accounts can access the projects (similar to how the
event library is accessible)
Note: I've already moving the project library to a shared disk (the one
the event library is on) with no luck
Using iMove 09
tia...

You need to move each project to the external drive from within iMovie. Be sure to use command-drag so you move, not copy.

How can I share my ical with other users on the same machine?

Having recently bought an imac I set up accounts for the family. I'd like to share a generic calendar with everyone that only the adults can read/write, but want to allow everyone to hold their personal calendars at the same time. All the accounts are on the same machine. Can this be done? If so how?

You can only do this by syncing your calendar to an external server - MobileMe is designed for this but if you don't already have a MobileMe account you can't start one now.
If you do have a MobileMe account the method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/sharedcalendar.html#publicshare
If you don't, you could sync to Google Calendar (Google accounts are free) or wait for iCloud which should be out in a couple of months and will probably provide this sort of facility.
You might like to consider BusyCal which is like iCal Pro - similar to iCal but with extra facilities. It can sync calendars on a Lan and also between accounts on the same machine (you have to have fast user switching enabled).
There is a free trial available on their website: it's slightly cheaper from the Mac App Store. (I have no connection with this company).

Problem with multiple threads accessing the same Image

I'm trying to draw into one Image from multiple threads. It works fine for a while, but then suddenly, the image stops updating. Threads are still running but the image won't update. I'm using doublebuffering and threads are simply drawing counters into Image with different speed.
It seems like the Image gets deadlocked or something. Anyone have any idea what's behind this behavior or perhaps better solution to do such thing.
Any help will be appreciated.

Sorry Kglad, I didn't mean to be rude. With "No coding
errors" I meant the animation itself runs with no errors. I'm sure
you could run the 20 instances with no freezing (that's why I put
the post :) ) But I'm affraid it is an animation for a client, so I
cannot distribute the code.
Perhaps I didnt explain the situation clearly enough (in part
because of my poor english...).-
- By 20 instances I mean 20 separated embedded objects in the
html
- The animation is relatively simple. A turned on candle, in
each cycle I calculate the next position of the flame (that
oscilates from left to right). The flame is composed by 4
concentric gradients. There is NO loops, only an 'onEnterFrame'
function refreshing the flame each time.
- It's true that I got plenty variables at the _root level.
If that could be the problem, how can I workaround it?
- It is my first time trying to embed so many objects at the
same time too. No idea if the problem could be the way I embed the
object from the html :(
- The only thing I can guess is that when a cycle of one of
the object is running, the other 19 objects must wait their turn.
That would explain why the more instances I run, the worst results
I get. In that case, I wonder if there's a way to run them in a
kind of asynchronous mode, just guessing...
Any other comment would be appreciated. Anyway, thanks a lot
everybody for your colaboration.

Problem with multiple .swf in the same page

Hi everybody,
I got a small animation written in actionscript 2.0. I need
to load it several times in a webpage (about 20 instances), but
seems to be too many work and the web browser freezes.
Anyway, it's a relatively simple script (not complex
arithmetics per cycle, although two or three color gradient
refreshing), so I think the problem could be the fact of having so
many instances running at the same time...
Is there any way to fix this problem without reducing the
quality of the animation?
Thanks a lot!

Sorry Kglad, I didn't mean to be rude. With "No coding
errors" I meant the animation itself runs with no errors. I'm sure
you could run the 20 instances with no freezing (that's why I put
the post :) ) But I'm affraid it is an animation for a client, so I
cannot distribute the code.
Perhaps I didnt explain the situation clearly enough (in part
because of my poor english...).-
- By 20 instances I mean 20 separated embedded objects in the
html
- The animation is relatively simple. A turned on candle, in
each cycle I calculate the next position of the flame (that
oscilates from left to right). The flame is composed by 4
concentric gradients. There is NO loops, only an 'onEnterFrame'
function refreshing the flame each time.
- It's true that I got plenty variables at the _root level.
If that could be the problem, how can I workaround it?
- It is my first time trying to embed so many objects at the
same time too. No idea if the problem could be the way I embed the
object from the html :(
- The only thing I can guess is that when a cycle of one of
the object is running, the other 19 objects must wait their turn.
That would explain why the more instances I run, the worst results
I get. In that case, I wonder if there's a way to run them in a
kind of asynchronous mode, just guessing...
Any other comment would be appreciated. Anyway, thanks a lot
everybody for your colaboration.

Problems with multiple connections in the same transaction

Hi all !
          I'm have two questions regarding the way weblogic handles multiple
          connections.
          1) first, I don't understand why weblogic always create a new Managed
          Connection when I'm asking for 2 connection handles on the same connection
          factory and with the same connectionRequestInfo. Isn't it supposed to share
          connections ?
          For instance, the following snippet of code results in the creation of 2
          managed connections:
          ConnHandle conn1 = myCF.getConnection(myRequInfo);
          ConnHandle conn2 = myCF.getConnection(myRequInfo);
          The class corresponding to myRequInfo does implement the equals and hash
          method, so that weblogic's connection manager could use them to check that
          the queried connections are the same, and thus could share a single
          ManagedConnection between multiple connection handles. Apparantly it does
          not do that...
          2) OK, I just let weblogic create the 2 managed connections, but... My use
          of the connections is as part of a transaction. Here is what happens:
          ConnHandle conn1 = myCF.getConnection(myRequInfo);
          // a new managedConn1 is instanciated. the following happens (just a
          description)
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS)
          // I use the conn1 handle
          conn1.close();
          //xar1.end(SUSPEND)
          ConnHandle conn2 = myCF.getConnection(myRequiInfo);
          // a new managed connection managedConn2 is instanciated.
          // xar2 = managedConn2.getXAResource();
          // xar2.start(RESUME)
          // I use conn2 handle
          conn2.close();
          // xar2.end(SUSPEND);
          // my bean returns from the remote invocation
          // the client of the bean asks to commit (using UerTransaction.commit on the
          client side)
          // xar2.end(SUCCESS)
          // xar2.commit(onePhase=true);
          // managedConn2.cleanup();
          And that's all. So, as one can see, managedConn1.cleanup was never called.
          When looking in the weblogic console, I can see that I have one connection
          with 0 handle and one with 1 handle, deemed as still being in a transaction.
          So, the conenction manager apparantly loses a managed connection during the
          transaction. And it's very very bad because after a couple of transactions,
          I'm running out of managed connections (I had set a limit of 10).
          Any one has seen such a weird behavior ? Is this a problem on my side, or
          weblogic's ? Thanks for your help.
          Sylvain


          I ran another test. This time I have a bean that makes use of a connector
          once per method invocation. The bean method invoked is "sayHello" and it
          gets a connection to the EIS, perform an operation on it and release it. The
          connector I developed uses XA transactions.
          My test client just calls 3 times myBean.sayHello().
          I can distinguish two cases:
          1) first, the client doesn't do transaction demarcation. In this case, since
          the sayHello method is marked as requiring transaction, the folowing happens
          in the bean:
          // **** first invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn1 is instanciated
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar1.end(SUCCESS);
          // the bean returns from its invocation
          // xar1.commit(onePhase=true)
          // managedConn1.cleanup()
          // **** second invocation of the bean
          connHandle = myCF.getConnection();
          // managedConnectionFactory.matchManagedConnection is called. It returns the
          managed connection (managedConn1) that is in the passed set
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close
          // xar1.end(SUCCESS);
          // the bean returns from its invocation
          // xar1.commit(onePhase=true)
          // managedConn1.cleanup()
          // **** third invocation of the bean
          connHandle = myCF.getConnection();
          // managedConnectionFactory.matchManagedConnection is called. It returns the
          managed connection (managedConn1) that is in the passed set
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close
          // xar1.end(SUCCESS);
          // the bean returns from its invocation
          // xar1.commit(onePhase=true)
          // managedConn1.cleanup()
          2) second case : the client performs transaction demarcation. In that case,
          the connection manager instanciates 3 managed connections, calls start/end
          on each XAResource corresponding to each managed connection, calls commit
          once, but also calls cleanup only once, leaving 2 lost managed connections
          The client looks like this:
          UserTransaction utx = context.lookup("javax/transaction/UserTransaction");
          utx.begin();
          MyBean myBean = ctx.lookup(".......");
          myBean.sayHello();
          myBean.sayHello();
          myBean.sayHello();
          utx.commit();
          on the server the following happens:
          // **** first invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn1 is instanciated
          // xar1 = managedConn1.getXAResource()
          // xar1.start(NOFLAGS);
          // managedConn1.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar1.end(SUSPEND);
          // the bean returns from its invocation
          // **** second invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn2 is instanciated
          // xar2 = managedConn2.getXAResource()
          // xar1.isSameRM(xar2) is called. returns true
          // xar2.start(RESUME);
          // managedConn2.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar2.end(SUSPEND);
          // the bean returns from its invocation
          // **** third invocation of the bean
          connHandle = myCF.getConnection();
          // managedConn3 is instanciated
          // xar3 = managedConn3.getXAResource()
          // xar2.isSameRM(xar3) is called. returns true
          // xar3.start(RESUME);
          // managedConn3.getConnection gives a connection handle
          connHandle.doSomeWork();
          connHandle.close()
          // xar3.end(SUSPEND);
          // the bean returns from its invocation
          // the client invokes commit on the UserTransaction
          // xar3.end(SUCCESS);
          // xar3.commit(onephase = true);
          // managedConn3.cleanup();
          And so, managedConn1 and managedConn2 got lost in the way...
          What's more puzzling, it's that when monitoring my connector with the
          console, I can see that there are 3 connections. 2 declared as still having
          one handle used and being in transaction, and one not in transaction and
          with 0 active handle. BUT when monitoring the JTA part of the server, I can
          see that there has been 1 transaction that committed, and no connection is
          "in flight" as the console says. So, on one side the console says 2 managed
          connections are still part of a transaction while on the other it says that
          no transactions are currently in flight.
          Thanks for any kind of help on this very bizarre behavior.
          Sylvain

Sharing a folder with other users on the same machine (SOLVED)

Hi,
Recently, I've been sharing my computer with my dad. I don't want him to use my account, since I have a lot of secret files and bookmarks on my profile. However, I would like to share all my music with him. What I did was to set the permission of my Music directory to 777 and using root create a symbolic link from my own account to his account. But then when I log into his account, it says the folder is corrupt.
Then I created a symbolic link from my music directory to /media/ and set the permission to 777. Again I tried to see if I can access it from my dad's account and got the same error.
What's the best way of creating common folders between users in a linux machine?
Note that, since I use Amarok, I don't want to move my Music to somewhere else, because it will mess up with the database info of songs.
EDIT: I solved the problem by using mount instead of symbolic links.
You have to issue the following command:
mount --bind /home/name/music /media/music/
Of course you have to execute this command whenever you boot the computer. Just place this command in rc.local and you're good.
Thanks
Last edited by mohtasham1983 (2009-11-05 22:06:03)

grey wrote:If I wanted to share it between different users, I wouldn't put it inside one particular users home directory. Just use a reasonable place that is not used by the system, like /usr/local/data, /var/shared or so, give it the desired permissions and that's it.
you are absolutely right and i recommend this as well.
grey wrote:The link will probably not work, because in order to read /home/yourname/music, you need to be able to read /home/yourname. That is even true if root created the link.
that is true for symbolic links, not bind mounts. a bind mounted dir doesn't care about the parent directories because your not traversing to it through a link, it's just 'there'. this is how i put folders under my ~ out on my http server.

Problem with Multiple Versions of the Same Activex

Hi,
I Installed some "ABC" Activex 9.5 version and 10.1 version in the system.
I have ASP.net webpage which should use only 9.5 version of Activex. But by default 10.1 version is active and invoking by webpage.
Is there any way to enforce from webpage to use only 9.5 version of Activex?
Please let me know if you need more details.
Thanks & Regards,

Hi,
Have you tried to uninstall this Activex in Manage add-on, then install the 9.5 version? Please have a try.
Roger Lu
TechNet Community Support

I have problem with connect me to the internet

Hi, I have my apple TV and always I had problem to connect me to the internet I don't know why because I have my Mac, and Iphone that don't have any problem with internet and is the same server.

Ccan you elaborate on the issue?

Any problems with migrating In Design files from Mac to PC?

My wife is a commercial artist, and we are considering getting CS4 here at home on our PC. She has a Mac at work. Are there any problems with switching files between the Mac and the PC so she can get some work done on the same files at both the office and at home?
Thanks!

One recurring problem I have is the different types of the Symbol font. Mac InDesign insists on adding (TT) -- "Symbol (TT)" -- to 'Windows' documents, and vice versa. I think the root of the problem is Symbol on Windows is an OTF font, whereas on the Mac it's still a 'regular' TTF. My Mac compadres tell me it's not easy to transfer the Windows font to the Mac -- its own version apparently being rooted deep inside the system.
However, it's not a big issue, as we by default encapsulate Symbol with a character style. So when ID alerts us, all we have to do is redefine this style, be it on Windows or on Mac. Fortunately I've never seen text reflowing because of this (knocks on plywood desk).

I have a Mac OS X 10.6.8 and wish to upgrade to newest version...any problems with that?

i have a Mac OS X 10.6.8 and wish to upgrade to newest version (yosemite?)...any problems with that?

Read the system requirements for Yosemite.

Any problems with RH10 demo on the same machine as RH9?

Similar Messages

Maybe you are looking for