Any Problems with using GSM network in an area with dual CDMA/GSM networks.

I have a confirmed as unlocked Verizon iPhone 4S. I will be traveling to an area in China that has both CDMA and GSM networks. My Hong Kong GSM sim card has full voice and data services. I do not want to connect to the CDMA network (and thus end up with Verizon roaming). Will this be an issue? Can CDMA be disabled or can GSM be selected as the only way to connect to service?

Hi saskat,
I would like to clarify this for you once and for all. If you are using the SIM card of a carrier in Hong Kong and will be located in China, you will be billed from the carrier in Hong Kong and not Verizon Wireless. This is due to using the other carrier's SIM card, Depending on details of the SIM card from Hong Kong, you may want to consider getting a SIM card from the carrier in China. Your charges may be less, depending on the terms and conditions of the Hong Kong carrier. Please contact the carrier supplying you with the SIM card in order to obtain the details about the charges using the phone in China.
Thank you,
Christina B
VZW Support
Follow us on Twitter @VZWSupport

Similar Messages

  • I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    The warranty for the iPhone is not and has never been International.
    Warranty and support are ONLY valid in the country of origin.  The only exception is the EU where the entire EU is treated as one country.
    If the device will be used in India, buy it in India.
    An unlocked iPhone will work on any supported GSM carrier world wide.  The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

    Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

    elly903 wrote:
    Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
    Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
    It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007.  If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
    http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
    Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
                                  [click on image to enlarge]
    Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
    This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC.  Mavericks is a free download.

  • Any problem with a single MySQL database used on more than one site?

    I have a set of multiple sites hosted separately I'm working on. I'd like to set up a PHP/MySQL database on one site, and be able to pull data from it for completely separate sites. Seems like it shouldn't be a problem. Are there any problems with doing this I need to be aware of?

    I've set up databases on three different hosts, and in all cases I could access the databases from outside the domain of the site itslef.  GoDaddy is one of them, they used to restrict it, but now they give you the option when setting up a new database on your account.

  • My ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes?

    my ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes if I downloand straight from itunes.com?

    Your content is stored locally on your computer, when you update, it will not mess with your content at all.

  • Any problems with using ONLY windows?

    I have run to my end with OSX. Just want to use my iMac and all of its matched-hardware goodness with XP since it seems pretty stable. And the utilities that I work with in my line of work are windows only.
    Has anyone seen any problems with stability or anything like that with running JUST windows all the time?

    Hi Jonathan,
    What trouble shooting have you tried for your iMac?
    Have you check the hard disk for errors?
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
    If you cannot boot from your install disk, try booting in Safe Mode
    Mac OS X: How to force background maintenance tasks (logs and temporary items)
    Carolyn

  • My iphone 6's white border is cracked. Will there be any problem with it?

    WIll there be any problem with cracked white borde not the screen?

    The warranty for the iPhone is not and has never been International.
    Warranty and support are ONLY valid in the country of origin.  The only exception is the EU where the entire EU is treated as one country.
    If the device will be used in India, buy it in India.
    An unlocked iPhone will work on any supported GSM carrier world wide.  The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

  • SOLVED - Has anyone had any problems with xorg 1.11.14-1?

    Last night I had a double catastrophe. The first was nothing to do with Linux, but was the result of a rogue drive trashing my sata ports and killing both Arch and Windows. I managed to rescue Windows, but since Arch was running at the time (and updating) nothing I tried could bring it back. After restoring from a backup (10 days old) I started the updates again (a gargantuan 415Mb) which completed, though after a reboot X failed to start. Nothing in the logs, and no activity at all. My usual fix is to remove xorg.conf and reboot, which will generally get me to the desktop to troubleshooting stage using vesa drivers instead of catalyst, but even this couldn't get me to a desktop. I tried removing catalyst altogether from single user mode, but nothing would fix.
    I restored the backup again, and did all updates except kernel, catalyst, and xorg. Everything worked fine, so next I updated catalyst - still working. A fresh backup and I updated the kernel. Still working, which means the only thing not updated at this point (and in my mind the most likely culprit for the failures) is xorg.
    Now I'm not daft enough to try updating before I make a fresh backup (I've remade several tweaks to my system that got lost after the original crash), but before I go to the trouble, I wondered has anyone else had any problems with the updated xorg?
    For info, I'm running on a Phenom X4 965BE, AMD 4670HD with catalyst 12.1, kernel 3.2.2-1.
    TIA
    Last edited by Roken (2012-02-06 00:30:59)

    Any idea where the problem was?
    X also fails to start for me now, when the catalyst driver is loaded. It used to work before, but after recent upgrades and changes to the system it's somehow broken.
    (Same catalyst and xorg versions as you mentioned, but with kernel 3.2.4-1)
    Switching to the open-source radeon driver makes X start fine, switching back to catalyst breaks it again.
    Last edited by sas (2012-02-07 16:02:50)

  • If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

    If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
    Cheers.

    You canot easily change your country settings.  The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store.  You are also restricted to waiting 90 days between country changes.
    E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

  • Any problem with AMD Radeon or FirePro graphic cards?

    Hi.
    I know that Adobe recommend Nvidia cards for SpeedGrade, but I ask to owners of AMD cards if they have found any problems with AMD cards: bad performance, not realtime with relatively few layers, etc, etc
    Which is your experience?
    Thanks.

    FWIW: I'm using a AMD Radeon HD 6750M (1GB RAM) on my Mac Book Pro. So far it performs fine, in some cases it even feels faster than the Quadro 4000 in my Mac Pro, but I think that has more to do with the type of projects. Mostly doing DSLR on the MBP and R3D on the Mac Pro.

  • Any problem with 6110 navigator?

    Hi,
    Does anyone has any problem with your 6110 navigator? It seems like the phone always reset on its own and hang whenever the alarm clock goes off. I have sent it back to nokia care center, they upgraded my firmware but it hang when the alarm clock goes off. The nokia care center checked it again and said that it's due to my SIM card. I am not using a 3G SIM card. Does anyone has similar problem?

    An older SIM card can cause problems in newer phones. You might want to upgrade your SIM card and see if that cures the problem.
    Experience and persistence are second to none just ask user one.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question...

  • Any problems with Norton on iMac?

    any problems with using Norton on iMac?

    In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
    Read Here  >  Antivirus Discussion
    To keep your Mac Happy... See Here...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    Mac OS X: About background maintenance tasks

  • Has anyone had any problems with their charger blowing out?

    Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
    I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
    Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
    Any advice would be much appreciated.

    Everything in the box with iPhone is covered by the iPhone warranty ,go  to Apple genius bar before warranty expires

  • Do pop phones cause any problems with the iphone?

    Hello,
    I recently started using a pop phone with my iphone. ( it looks like a telephone handset and plug into my iphone).  Shortly thereafer I noticed that I am no longer able to get my phone to charge.  Has anyone else noticed any problems after using this device?
    TX
    Ozzie

    The phone goes on the charger at night every night and is at 100% when I am up. The only thing that I use it for is calls e-mail and an occasional Text. I don't; use for music or movies or anything like that. I do play solitaire on it but that hasn't been a problem up to now. I went in and googled the iPhone 6 for power save settings and it gave me a way to look at the Activity.
    The only thing that was used that day was Solitaire. I turned off Cell access to Solitaire and it seemed to last a little longer. I just turned it back on to see what happens. 
    Ricardo

  • Has anyone have any problems with 5s "sticking"?

    Has anyone had any problems with the 5s iPhone "sticking"? It's happened to me twice where I press the home button, and nothing happens.

    Yes.  Very sticky. especially the first time you go to click it after not using it for a bit.  Mine feels similar to if there were crumbs underneath, or parts crunching together.
    I just got off phone with Apple.  I thought it was my imagination and being too sensitive until just now seeing other posts having same complaint.   Apple rep on phone said it was not normal and for me to get it swapped out.

Maybe you are looking for

  • How do i set dpi for picture printing in photoshop elements 4

    how do i set dpi for pictures to print using photoshop elements 4 . . . thank you.  i do not mean resolution but the dpi asnd if i can't then what version would be able to do it . . .

  • Issue With Apps Adapter JDev 11.1.1.3

    Hi , We are facing some issue with Oracle Apps Adapter with Jdev 11.1.1.3. The wrappers for PLSql APIs were not properly generated. If anyone having such issue/solution pls share the same. Thanks In Adv Venkata Madhu

  • Problems running  SSL connection using JRUN 4.0/JDK 1.4.2

    Hi, Our project is to run a SSL connection to FedEx. When we test the connection with WebSphere 5.0 test server, it connected and worked. But, when we tested with our environment (JRUN4), exception thrown: The following are the exceptions: ==========

  • How do you fix a power button on an ipod touch 4G

    My ipod touch 4G button isn't working. So I was wondering how do you fix that? Should I get it replaced? Also, how much does it cost to get it replaced?

  • Cannot connect to Host with user name J2EE_ADMIN !!!

    Hi all, this exception when deploy from NWDS04s: <i><b>Caught exception while checking the login credentials for SAP J2EE Engine. Cannot connect to Host with user name J2EE_ADMIN</b></i> Complete exception: <i>Result => deployment aborted : file:/D:/