Any problems with using ONLY windows?

I have run to my end with OSX. Just want to use my iMac and all of its matched-hardware goodness with XP since it seems pretty stable. And the utilities that I work with in my line of work are windows only.
Has anyone seen any problems with stability or anything like that with running JUST windows all the time?

Hi Jonathan,
What trouble shooting have you tried for your iMac?
Have you check the hard disk for errors?
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
If you cannot boot from your install disk, try booting in Safe Mode
Mac OS X: How to force background maintenance tasks (logs and temporary items)
Carolyn

Similar Messages

  • I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    The warranty for the iPhone is not and has never been International.
    Warranty and support are ONLY valid in the country of origin.  The only exception is the EU where the entire EU is treated as one country.
    If the device will be used in India, buy it in India.
    An unlocked iPhone will work on any supported GSM carrier world wide.  The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

  • Any Problems with using GSM network in an area with dual CDMA/GSM networks.

    I have a confirmed as unlocked Verizon iPhone 4S. I will be traveling to an area in China that has both CDMA and GSM networks. My Hong Kong GSM sim card has full voice and data services. I do not want to connect to the CDMA network (and thus end up with Verizon roaming). Will this be an issue? Can CDMA be disabled or can GSM be selected as the only way to connect to service?

    Hi saskat,
    I would like to clarify this for you once and for all. If you are using the SIM card of a carrier in Hong Kong and will be located in China, you will be billed from the carrier in Hong Kong and not Verizon Wireless. This is due to using the other carrier's SIM card, Depending on details of the SIM card from Hong Kong, you may want to consider getting a SIM card from the carrier in China. Your charges may be less, depending on the terms and conditions of the Hong Kong carrier. Please contact the carrier supplying you with the SIM card in order to obtain the details about the charges using the phone in China.
    Thank you,
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • I purchased Adobe Creative Suite C2 and have been using it for years on the same computer no problem with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software.

    I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?

    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Mylenium

  • Any problems with a 1TB  boot drive?

    My Mac Pro finally got here and I added ram & a 1 TB WD Caviar Black HD as a boot drive. The boot drive as shipped was a 640GB WD Caviar Blue but after a lot of reading, I decided to make the 1TB black the Boot 'cause it's faster & roomier. Really don't want to have to change it out in a few years due to space constraints & go through the setup process all over again.
    I also have another 1 TB WD Caviar Black coming (should be here today) that I intend to use as a capture scratch disc. I still have the 640GB blue in the machine for use probably as a boot drive for windows XP Pro & all the programs I run on it in my PC at this time.
    The question I have is this: is there any problem with using the 1TB black as a boot drive?
    I think I recall that in the past some folks advocated a smaller boot drive, but that was before the days of dual processor, 64 MB cache, and dual heads that make the 1TB quite speedy.
    I think I'll setup a PCIe external raid in the not too distant future as the archive & backup resovoir. Any difficulties with that?
    Ken

    Thanks for the replies, they are all helpful.
    @ Jim C, glad to hear confirmation on your setup success w/ WD Blacks. My thinking was exactly the same as yours, a drive with lots of room is faster.
    @David, I've always had good luck with Seagate, but only had one older WD. I'm aware WD went through some reliability problems earlier. The reviews I found on the recent WD Cav blacks all said they were better all around drives than Seagate now a days. Sorry to hear about your drive failure, time will tell for me. I'm definitely going to go with enterprise class drives on the raid and will also have an installed spare in case on goes.
    Some days it's peanuts & other days it's shells. Despite marketing claims on MTBF, there will always be "premature" failures as Jim Kells points out in his reply.
    Ultimately when manufacturers get a better handle on SSD's, they will be the longest lived if for no other reason than no moving parts. Performance droop on many of them now also colors the current scene, IMO. Until then it's somewhat of a crap shoot.
    Ken

  • Any problems with Norton on iMac?

    any problems with using Norton on iMac?

    In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
    Read Here  >  Antivirus Discussion
    To keep your Mac Happy... See Here...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    Mac OS X: About background maintenance tasks

  • I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

    Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

    elly903 wrote:
    Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
    Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
    It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007.  If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
    http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
    Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
                                  [click on image to enlarge]
    Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
    This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC.  Mavericks is a free download.

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE

    I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
    == This happened ==
    Not sure how often
    == After innstalling windows 7

    As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
    Other than that you;ll have to step through in Debug.

  • Any problem with a single MySQL database used on more than one site?

    I have a set of multiple sites hosted separately I'm working on. I'd like to set up a PHP/MySQL database on one site, and be able to pull data from it for completely separate sites. Seems like it shouldn't be a problem. Are there any problems with doing this I need to be aware of?

    I've set up databases on three different hosts, and in all cases I could access the databases from outside the domain of the site itslef.  GoDaddy is one of them, they used to restrict it, but now they give you the option when setting up a new database on your account.

  • My ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes?

    my ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes if I downloand straight from itunes.com?

    Your content is stored locally on your computer, when you update, it will not mess with your content at all.

  • After installing Snow Leopard problems with using any of my Helvetica fonts

    I've never really have a problem with any of apple's products until now.
    After installing Snow Leopard I've found problems with using any of my Helvetica fonts,
    which is a BIG problem if you work in DTP or print. You CAN'T remove the system version of Helvetica, and replace it with your own anymore.
    Also Flash CS4 seems to be a dead duck, as after about 5-6 seconds of loading the program it crashes with a "KERNPROTECTIONFAILURE".
    <title edited by host>

    Thanks Tom but the original post title was "Work in DTP, don't install snow leopard", but of course apple were unhappy with the title. I know the issue/problem has been discussed for months, the real problem is that it shouldn't be a problem which everyone has to find work arounds for.
    After 4 days of playing about, I've finally got flash CS4 working and Quarkxpress was also a big problem for a few months. Printer description (PPD) files which snow leopard doesn't like, but worked in tiger & leopard.....means I can't use my two A3 inkjets for proofing anymore.
    I'm just disappointed by snow leopard

  • SOLVED - Has anyone had any problems with xorg 1.11.14-1?

    Last night I had a double catastrophe. The first was nothing to do with Linux, but was the result of a rogue drive trashing my sata ports and killing both Arch and Windows. I managed to rescue Windows, but since Arch was running at the time (and updating) nothing I tried could bring it back. After restoring from a backup (10 days old) I started the updates again (a gargantuan 415Mb) which completed, though after a reboot X failed to start. Nothing in the logs, and no activity at all. My usual fix is to remove xorg.conf and reboot, which will generally get me to the desktop to troubleshooting stage using vesa drivers instead of catalyst, but even this couldn't get me to a desktop. I tried removing catalyst altogether from single user mode, but nothing would fix.
    I restored the backup again, and did all updates except kernel, catalyst, and xorg. Everything worked fine, so next I updated catalyst - still working. A fresh backup and I updated the kernel. Still working, which means the only thing not updated at this point (and in my mind the most likely culprit for the failures) is xorg.
    Now I'm not daft enough to try updating before I make a fresh backup (I've remade several tweaks to my system that got lost after the original crash), but before I go to the trouble, I wondered has anyone else had any problems with the updated xorg?
    For info, I'm running on a Phenom X4 965BE, AMD 4670HD with catalyst 12.1, kernel 3.2.2-1.
    TIA
    Last edited by Roken (2012-02-06 00:30:59)

    Any idea where the problem was?
    X also fails to start for me now, when the catalyst driver is loaded. It used to work before, but after recent upgrades and changes to the system it's somehow broken.
    (Same catalyst and xorg versions as you mentioned, but with kernel 3.2.4-1)
    Switching to the open-source radeon driver makes X start fine, switching back to catalyst breaks it again.
    Last edited by sas (2012-02-07 16:02:50)

  • Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

    I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC.  It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
    connected to the network and try again."
    I have no problem copying files from the server to the PC.
    Any ideas?

    Hi,
    How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
    To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
    Secondly, try to use Network Monitor to capture network communication package for test.
    Network Monitor:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    Roger Lu
    TechNet Community Support

  • If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

    If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
    Cheers.

    You canot easily change your country settings.  The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store.  You are also restricted to waiting 90 days between country changes.
    E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Maybe you are looking for

  • Content Engine Module is logging DHCP errors

    Content Engine Module in Cisco 3725 is logging the following eror continously: Sep 29 16:47:50 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Sep 29 16:47:54 ContentEngine dhclient: %CE-DHCP-5-19

  • Imported .swf publishes as a relative link. Can it be embedded?

    So I have created a small .swf animation in Flash CS3. I imported into my CP project. When I publish, the .swf is published as a separate .swf and linked to the CP .swf with a relative link. This will not work for me. How can I embed the animation in

  • QTVR in 64 bit Vista

    I am using the latest QT (7.6.4) and recently created a QTVR file from ArcSoft's PanoramaMaker. When I look at the file on our laptop, which is running Vista 32-bit, it works fine. When I run it on my tower which is running the 64-bit version, Quickt

  • No Banner with Standard Room Templates

    Hi all, I'm getting crazy here. I proceed as in <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/be/6ca0404dd52b54e10000000a1550b0/frameset.htm">SAP Help</a> but when I upload home_area_content_templates_fullupdate.zip I get all the Templates

  • GR using Special Movement key

    Hi All I have set up a Special Movement key that receipts in project stock in to a warehouse bin and confirms putaway that we use when processing internal stock transport purchase orders (YUB doc type). I would like to automate this process so that t