Any problems with Waves plug ins with Logic 8?

Checking to see if anyone has used Waves plug in with Logic 8 yet and had any trouble.

Only the same as in LP7. Maxx Bass and a couple of others fail the validation but still work.
Ian

Similar Messages

Final cut pro conflicting with waves plug ins

Hi, I'm a pro tools user and I have wave plug ins. These plug ins are automatically loading up in final cut when I first enter final cut.
What is happening is I click on final cut to boot it, it starts loading my plug ins, then it says that it cant find a couple of plug ins. Then it automatically quits, giving me no access to final cut.
So basically I cant get into final cut at all. I erased my plug in preferences and my final cut preferences, that did nothing. I booted with extensions off in safe boot mode, that still did nothing.
IS THEIR ANY BUTTON I CAN HOLD DOWN TO BYPASS LOADING THOSE PLUG INS WHEN I BOOT UP FINAL CUT SO IT DOESN'T CRASH MY PROGRAM SO I CAN GET INTO FINAL CUT AND TURN OFF THOSE PLUG INS?
Thanks.

If you have more than one waveshell, which may be the reason for your problem (like one that calls for plugs you don't have), the quickest solution is to drag all of them out of the folder (applications/waves/waveshells) temporarily. Then make sure FCP launches correctly (it should). Then put only the lowest numbered waveshell back in, and try again. This way you'll find which is the culprit, and can permanently remove it. I had this problem and used this solution successfully.
If you have only one waveshell, start by removing it to see if that solves the launch issue, which it should, then look at your plugins themselves (applications/waves/plugins) to see which might be the culprit. If there are any demo versions or ones you otherwise don't own licences for, remove them first and try relaunching FCP. You should eventually find the culprits and be ok.
Also, make sure your Waves plugins/waveshell are updated to the proper versions for your OS and Pro Tools versions. See the waves site for details on that.
Ted Spencer, NYC
www.tedspencerrecording.com

WAVES plug ins not in mixdown- please, please help me!!!!

Hi. Im an experienced adobe user (been using it since it was cool edit). Im now using the latest Adobe for Mac on my MacBook. Heres the deal:
When I go to export a mixdown, any plug in that didn't come with Adobe (such as WAVES) DOES NOT SHOW UP ON THE MIXDOWN. They work just fine in the actual multitrack session, but then just disappear in the mixdown. Ive tried every way possible to mix the file down- time selection, entire selection, Export, Mix to new track- you name it- but the waves just aren't on the mixdown. This is driving me absolutely bananas- has anyone else had this issue? Can someone please help me? Im so desperate for an answer on this that Ill give you some free voice work if you can tell me how to solve this issue! Or send you flowers- something! H E L P M E!!!!!!

I'm not a WAVES user but I've noticed some Cubase users (on their forum) have experienced problems with WAVES plug-ins. It might be related. Have you contacted Waves directly? They should be aware of any problems and would be best able to help find a solution.
Good luck.

Waves Plug-Ins and Audition 3.0

Has anyone else has problems getting Waves Plug-Ins to work with Version 3 of Audition?
Admittedly, I am using the demo to make sure everything work before I upgrade to version 3 [but that has never been a problem for me in the past].
I can only get half of my Waves Plug-Ins to work, and the other half says they are incompatible.
Does anyone have any ideas, because it is next to impossible to get help from Waves.
Thanks
Stan

I think all you can do is move them out of whatever folder there are in.

Waves plug ins is compatible with logic x ?

waves plug ins are compatible with logic x?

Excuse me your name is Jan not Dan sorry ,got the 32 bit version it works perfect on logic pro 9 is there any chance to work at 32 bit in logic X ? thanks for your help rewards

UAD Powered Plug-Ins with Logic Pro?

I am considering the Apollo Twin http://www.uaudio.com/twin audio interface and am wondering if anyone has had any luck using their UAD Powered Plug-ins in Logic Pro? Thanks.

zimon-zimon wrote:
hi there all.
last march (07), i went to an event in london called the Sounds Expo....
I was given a CD called the WAVES PLUG INS demo.
I put it in my mac and from that day on, i have been unable to use any third party plug ins such as fxpansion GURU, native instruments Absynth 4, PSP Vintage Warmer etc etc...
This is due to the PACE protection scheme that was probably updated by the Waves installer. Oops.
I have reinstalled logic several times, but nothing has changed. The usual AU plug ins in Logic work just fine. Its anything that is third party that doesnt work, like extra soft synths of effects etc...
Logic has NOTHING to do with this issue. This is a copy-protection issue. I RECOMMEND you do the following: Run Onyx, and delete ALL caches, especially the kernel caches. This will reset the PACE cache, wherefore the plug-in list for the copy protection software will be reset, so you can see your plugins again. I've been through this.
I phoned The editor of SOund on Sound magazine and he suggeste4d that I reinstall OSX itself...
No disrespect to whomever you talked to over there, but the guy does not know what he is talking about.
I'm a little worried if i do this, i will lose all my files????
Yes you will. DO NOT REINSTALL OSX.
Any advice on how to get these plugins working anyone???
See my answer above.
Many thanks for your time.
PEACE
Cheers

HT202213 Homesharing. I had my iTunes set up to play music through my receiver & speakers upstairs. I have airport with RCA plug ins to my receiver auxiliary jacks. Homesharing is on & everything checks out but it no longer works. Any suggestions?

I had my iTunes set up to play music through my receiver & speakers upstairs. I have airport with RCA plug ins to my receiver auxiliary jacks. Homesharing is on & everything checks out but it no longer works. Any suggestions? I have no firewall & I have removed Smith clean program to fix this issue. I am running OS 10.8.2

I called AppleCare this morning and Sean helped me out in a huge way. In all of my attempts, I had not done a factory-default reset on the main base station and apparently some sort of endless loop had occurred between those two stations. Sean was very helpful and patient with me, but now the system is working as promised. Moral of this story is if a factory default rest doesn't help on the "problem" base station, try resetting all of the units.

Problems with InDesign Plug-ins in CS6

Every time I launch InDesign CS6 a bunch of pop-up boxes appears. They all have to do with some plug-ins it cannot register. I think this causes the sudden shut down of the program when I want to pick a different color.?
Anybody knows how to fix this?
These are the plug-ins it concerns:
Color Picker Panel plug-in
Swatches Panel plug-in
Transparency UI plug-in
Find and Change Panel plug-in
I am certain that the plug-ins are in the right folders, however it does not work...
Thanx

See Replace Your Preferences and if that doesn't do it, see Adobe Forums: InDesign crashes at startup for a list of other things to delete from the original account.
When all else fails, rename the Adobe folders in your user library (remmber, there are TWO folders, anf they're hidden, so see Access hidden user library files | Mac OS 10.7 Lion) and copy the ones from the guest account.

Build Plug-Ins with CS4 SDK under OS X 10.5 SDK with Xcode 3.1.2?

I have existing Photoshop Universal Binary Plug-ins built under OS X 10.4 and the OS X 10.4 SDK, with Xcode 2.1.x & Photoshop CS3 SDK. They are mature and stable.
I am attempting to build these Plug-Ins with the new CS4 SDK under OS X 10.5.6 & 10.5 SDK with Xcode 3.1.2.
They do not build as there is a conflict in PITypes.h with the attempted redefinition of uint32, already defined in the Apple header cssmconfig.h, amongst other problems.
Has anyone built with a similar configuration?
Thank you!

I've had good luck with Snow Leopard 10.6.1, XCode 3.2 and the Photoshop CS4 SDK by changing the build settings like this:
1. Open the Target Info window: Project->Edit Active Target
2. Change Architectures from native to 32-bit Universal (because my native is 64 bit)
3. Make sure Base SDK is 10.4 (you must have that installed of course). If you select 10.5 for some of the Photoshop examples, you get complaints of depreciated APIs.
4. Change C/C++ compiler version to GCC 4.0
In the case of using these steps, there is no need to edit any headers, comment anything out, etc.
Hope that helps!

Nik PLug-ins with Aperture

Greetings, This is for anyone using Nik Software plug-ins with Aperture. Is there a way to back out of adjustments once you've saved your work in the Nik editor? When using with Photoshop, the Nik adjustment will create a "layer". Deselecting the layer will allow you to essentially remove the adjustment. I don't see any way of doing that in Aperture. Am I missing it, or are you basically down the road with the adjustment once you make it?
Thanks.

Once you save in NIK, the adjustments are "baked in." There's no way to go back and remove them. What NIK does is save the TIFF file that Aperture creates and hands over to it, with the NIK adjustments. This won't affect the original RAW file.
You could always go back and send that same TIFF file to NIK an indefinite number of times. It wouldn't really be "non-destructive" but you can re-do or tweak any adjustments you want to tweak.

Error Messages/Building Plug-ins with Eclipse SDK or VCExpress 2005

Hi,
I am an newbie in building InDesign-Plugins. I have installed the Adobe InDesign Plug-in Editor on my Windows XP PC (InDesign CS3 SDK, Eclipse, JRE 1.5, Visual Studio 2005 (VCExpress Edition for C++)).
I tried to build one of the example Plug-ins with Eclipse. After startting the build process of the "transparencyeffectui"-example or the "DollyXs"-example the following message appears:
Buildfile: F:\SDK\workspace\DollyTest\build.xml
win:
[echo] Now compiling FR file F:\adobe_indesign_cs3_products_sdk_503win\source\sdksamples\dollytest\Dolly.fr for win
[delete] Deleting: F:\SDK\workspace\DollyTest\ODFRC.res
[echo] FR Compilation Complete: Attempting to build C++ files...
BUILD FAILED
F:\SDK\workspace\DollyTest\build.xml:66: Execute failed: java.io.IOException: Cannot run program "D:\Programme\Microsoft Visual Studio 5\Common7\IDE\devenv.com": CreateProcess error=2, Das System kann die angegebene Datei nicht finden
Total time: 485 milliseconds
The compiler did't start because the file "devenv.com" is missing in the "Microsoft Visual Studio 2005/Common7/IDE"-directory.
The free "Visual Studio Express Edition" is delivered withot this file.
Where can i get this file? Or is it possible to change the exec line in the built-xml-file to get the Compiler started?
So I started the VCExpress-Programm an opened the transparencyeffetui-Project-File to start the build process. But again i got an error message:
1>------ Erstellen gestartet: Projekt: TransparencyEffectUI, Konfiguration: Debug Win32 ------
1>Performing Custom Build Step
1>Compiling...
1>VCPlugInHeaders.cpp
1>f:\adobe_indesign_cs3_products_sdk_503win\source\precomp\common\WShukHeaders.h(70) : fatal error C1083: Cannot open include file: 'windows.h': No such file or directory
1>Build log was saved at "file://f:\adobe_indesign_cs3_products_sdk_503win\build\win\objD\TransparencyEffectUI\Bui ldLog.htm"
1>TransparencyEffectUI - 1 error(s), 0 warning(s)
========== Erstellen: 0 erfolgreich, Fehler bei 1, 0 aktuell, 0 übersprungen ==========
There is no "windows.h"-file in the SDK directory. I tried to include all available SDK-"inculde"-directories to the VC++ directories in the option menue in VCExpress but i got the same error message.
Any ideas how to get the plug-in build with Eclipse or Visual Studio Express 2005 (C++)?
zaphodbeeblebroxxx

OK, so first some background:
1) The basic process goes like this:
a) one release doc (edited by the developer, presumably) and the
template docs are copied to the build area
b) Each doc is unzipped (ODT's are just ZIP files) into a subdir
c) The doc contents are copied around; this is to allow Ant to
replace its special @VAR@ variables in the document content
d) The docs are zipped back up into ODTs
e) The ODTs are converted into PDFs using OOo's macro functionality
Here are the troubleshooting steps I would apply:
1) Make sure the external.odt file exists - check the build area
(//content/build/<pluginname>/tmp/) and can be opened using normal
OpenOffice
2) Check that the release.odt file exists (same location) and can be
opened using normal OpenOffice
3) See if you can manually convert the external.odt file into a PDF -
the command we use is simply:
soffice -invisible
macro:///Standard.Collectors.External2PDF(${pkgdir}/tmp/external.odt)
(replace ${pkgdir} with the build directory path).
If all that works, then the Ant build process should work.
Also - what does that OpenOffice error popup say?
DCorlette
DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
View this thread: http://forums.novell.com/showthread.php?t=416875

Why won't Adobe flash load and why am I now left with blocked plug ins ?!!

Yesterday I received a demand via Safari to download latest version of Adobe flash player.
I did so and immediately found my system virtually unusable, with blocked plug ins at every turn. Neither has the flash player actually installed, despite constant attempts. I have removed previous versions, etc, restarted the Mac etc, taken every bit of advice going.
24 hours later and having wasted nearly a whole day, I am still left with a Mac with applications I cannot now access which were running to perfection before trying to download Adobe flash player. Hugely frustrating and annoying.

I had a different issue in that the install hung at 95% but I used a manual install and that fixed the problem. See if this works for you as it appears that the installer is buggy.
Use the "Manual Install" mode. Control-click on Install Adobe Flash Player.app
"In the Contents/Resources folder, you’ll find a file named Adobe Flash Player.pkg. Double click it"
That worked.
Just to mention, you do not need to restart the system after installation

Does Mountain Lion (10.8.4) come with SharePoint plug-ins, or did I just install these?

I did a custom installation of Microsoft Office 2011 for Mac on my MacBook Air running 10.8.4., but I changed my mind and decided to uninstall it.
I only installed Word, Excel, and Proofing Tools (English only).
I'm reading up on how to fully remove all the tidbits Microsoft sprinkled about, and I noticed a couple files on my system:
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
I didn't include SharePoint in the installation, so I'm not sure that's where these files came from. It's a new machine, so the only alternative is that they were included with OS X 10.8.4, in which case I'm inclined to leave them be.
Does anybody know more about these files, where they likely came from?

AFAIK OS X 10.8.4 does not come with SharePoint plug-ins. Those are from Microsoft and are most likely added by SilverLight.
I am running OS X 10.10.1 and Office 14.4.6 and I do not have SilverLight installed... I do not have those two plug-ins you mention. Thus I don't believe Office for the Mac 2011 loaded them.
Hope that helps
Kind Regards, Rich ... http://greatcirclelearning.com

Can I use Topaz plug ins with PS from the cloud?

Can I use Topaz plug ins with PS from the cloud?
Can I use Topaz plug ins with PS from the cloud?

Your Creative Cloud account allows you to install software on two computers, regardless of operating system. Just log in to Creative Cloud from your second computer and install the app. See http://www.adobe.com/products/creativecloud/faq.html.
If you opt to do so, your files will be synched between the machines and Creative Cloud itself.
--- Ben

How to "not" share FCP Plug-ins with other users

I'm Installing FCP on a new Intelmac. Several users/editors will use the computer in the editsuite.
how can you install your FCP plugins so that they only load if your loggin with your useraccount.
in other words how to NOT share your plug-ins with other useraccounts.... ?
2.5 GHz dual Quad G5 + 933 QuickSilver G4 Mac OS X (10.4.9) 2x 23" Cinadisplay, Digidesign Digi 002R

Hello
Hopefully I'm not infringing the Terms Of Use by asking you to have a look at THIS PAGE of the Apple Discussions guide.
Regards,
J

Any problems with Waves plug ins with Logic 8?

Similar Messages

Maybe you are looking for