Any program avilable to see the Unix file into PC

Hi,
Any program avilable to see the Unix file into PC ?
Best Regards,
Bansi
Moderator message: please learn about [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting further.
locked by: Thomas Zloch on Aug 6, 2010 2:10 PM

Hi,
For this you will have to get the FTP server acces...
if you have that, then follow the below steps.
run program RSFTP002 in SE38.
here in the selection screen you will have to fill the details like USER , PASSWORD , HOST , COMMAND and RFC DESTINATION as mandatory.
Command is nothin but to get the file from there... if you know the file name, then fill the field as GET filename.
once this has executed successfully, it will be placed in sap directory './' . To view this, go to AL11 and double click this directory. search for the filename that you had downloaded.
Hope this helps you.
Regards.

Similar Messages

How to chunk the XML files into smaller files using peoplecode.

We are trying to load the Invoices through our XMLDoc PeopleCode that we have written long back.
Previously the file is not that big and we are able to load them successfully. But now each file is more than 200MB and we are getting the below error when initiated the process..
Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running “.
I tried to chunk the file manually to 50MB it is able to run it properly but chuncking manually is not possible for all the files as it is time taking process..
Is there any way that we can check on Webserver/Appserver whether whats happening and how to handle this error..
Or any sample code to divide the big file into smaller files..
Please let me know your thoughts..

Good morning Ashok,
Your data is in a SQL*Loader supported datatype, so basically it should not be a problem.
Have you checked the Database Utilities guide (for Oracle9i for instance: http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96652/toc.htm) on how to handle this?
I'll also repeat my previous question, have you ever been able to load data into the database using SQL*Loader (either using ASCII values or any other datatype)?
For the OWB part, have you read "Importing Data Definitions" (typically chapter 4)? More specifically, "Specifying Field Properties" in "About Flat File Sources and Targets"?
In "SQL*Loader Properties" it says the following:
Type Describes the data type of the field for the SQL*Loader. You can use the Flat
File Sample Wizard to import the following data types: CHAR, DATE, DECIMAL
EXTERNAL, FLOAT EXTERNAL, INTEGER EXTERNAL, ZONED , AND ZONED
EXTERNAL. For complete information on SQL*Loader field and data types, refer to
Oracle9i Utilities. Currently, only portable datatypes are supported.
If you check the database utitlities guide (chapter 6 Field List Reference) and look for "SQL*Loader Datatypes", you'll find (packed) decimal under the Nonportable Datatypes. This implies that OWB does not support it.
This does not mean you can't use SQL*Loader, you'll only have to define everything separate from OWB and call it separately as well.
Good luck, Patrick

How to get the Attributes of the UNIX file Directories ?

Hi Guru,
How to find of the Attributes of the UNIX file Directories in sap TC :- u2018 *ZZWT*u2019 .
The file attribute details need to show in the report.
I try on FM : EPS_GET_FILE_ATTRIBUTES
/SDF/GET_FILE_INFO
But not getting the attributes details.
If any idea plz. Help me.
Regards,
Subash

Which basis release do you use?
From 7.0 you have [GET DATASET|http://help.sap.com/abapdocu_70/en/ABAPGET_DATASET.htm] statement
Before, you may only get what you see in AL11 : mimic what is in program RSWATCH0
Or you may register and use [UNIX commands (SM69 transaction / SXPG|http://help.sap.com/saphelp_nw70/helpdata/en/fa/0971e1543b11d1898e0000e8322d00/frameset.htm]) and get the results
Edited by: Sandra Rossi on Aug 2, 2009 12:39 AM

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

How to remove the EOF characters 0d & 0a from the unix file

Hi,
We have a requirement in which the EOF (End of file) characters 0d & 0a needs to be removed from the Unix file generated by an ABAP program. Any pointers/solutions will be highly appreciated.
Regards,
Anil

UNix files do not have a 0d and 0a end of line, they only have 0a as line terminator.
In general, unix files do not have a end of file character (^Z).
If you do not want to have several lines, dont write several lines, write all in one line using a string variable.

How can I see the stored files in cache?

How can I see the stored files in cache? I need them!
Thanks for helping me.

The History menu lets you revisit the page where you can drag any page element from it.
How would you sort through thousands (tens of thousands) of files found in a cache?

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: Sy

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!

Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Ipod as hard disk - Why am I not able to see the whole file?

I'm using my 80 gig 5th gen ipod as a hard disk for the first time. I've dragged a 32 KB text file to the ipod. When I scroll though the file all is great...but I'm not able to see the whole file? It's like I get one page and that's all. Any ideas to help me?

Do you mean the Notes function? If so, the file size per note is, I believe, 4k. Therefore, you'd need to break up a 32k file into several parts or it will be truncated.

Is there any way I can see recovery hidden files ?

Is there any way I can see recovery hidden files ?

Hello, @Fhm991
If you're trying to view the files on the recovery partition, I would like you to read over this document: Recovery Partition is Accessible to Reading and Writing Files.
If you're looking at other hidden files please specify.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

Hello
i got this error in step2
Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
here is full summary
> Bootstrap-CsComputer
Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
Checking prerequisites for bootstrapper...
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Host name: lync.rcc.local
Disabling unused roles...
Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
Checking prerequisites for roles...
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Checking prerequisite PowerShell...prerequisite satisfied.
Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
Checking prerequisite SupportedServerOS...prerequisite satisfied.
Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
Checking prerequisite IIS...prerequisite satisfied.
Checking prerequisite IIS7Features...prerequisite satisfied.
Checking prerequisite ASPNet...prerequisite satisfied.
Checking prerequisite KB2646886Installed...prerequisite satisfied.
Checking prerequisite BranchCacheBlock...prerequisite satisfied.
Checking prerequisite WCF...prerequisite satisfied.
Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
Checking prerequisite VCredist...prerequisite satisfied.
Checking prerequisite SqlNativeClient...prerequisite satisfied.
Checking prerequisite SqlClrTypes...prerequisite satisfied.
Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
Checking prerequisite UcmaRedist...prerequisite satisfied.
Checking prerequisite WinFab...prerequisite satisfied.
Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
Checking prerequisite RewriteModule...prerequisite satisfied.
Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
Installing any collocated databases...
Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
what should i do?
Please help me

Hi,
The issue may be related to disk read and write cache. Here is a similar case for your reference:
http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Cannot see the output file in my first project

Hi,
I follow the instructions of Exercise in Chapter 4 of CAP-0501 to make the project. I wonder why I cannot see the output file in 'C:\CAPExercises\0501\exercises\Active_Project\Output'.
There are two things I would like you know.
1. I do not have the file 'prjFileXferInput.xml', but find and copy a xml file. Is this a problem? Does CAPS have any special requirement on schema for the input file?
2. Is '\' and '/' a problem for Java CAPS? I notice the book using 'C:/CAPExercises/0501/exercises/Active_Project/Output�, while it is 'C:\CAPExercises\0501\exercises\Active_Project\Output' on windows. I am working on a standalone Windows 2000 computer.
By the way, can anyone give me a confirmation that '/' and '\' is not a problem for Java CAPS, as the server or application take care of it? Is it true?
Thanks,

I am answering my own question. The project works.

How to see the hidden files

Hi,
anyone provide the command for seeing the hidden files (or) dot files(Ex: .example.txt) in the unix.
Thanks
chelladurai

Or if you want to list only the dot files, you can do "ls -d .*".
Personally, I like to use "ls -d .* --color" as it then makes a color distinction between files and directories.
Kurt
Edited by: user11084799 on Mar 4, 2010 9:11 AM

Any way to publish only the changed files?

I'm uploading my Iweb site to my own domain using Dreamweaver, and I'm wondering if there is a way to only publish the changed files on my Iweb site?
It takes FOREVER to publish my site, and Iweb's folder structure is a complete mess so its nearly impossible to find the changes files.
Ideas, thoughts?
thanks,
Brown.Recluse

Jeff,
You are on the right track, definitely.
What I'm confused about is I guess which files I need to republish.
Remember, you have to let iWeb rewrite the entire html each time you make changes to it. That means all files, i.e., the entire site has to be republished by the application, at the very least to a folder, in order for you to have access to any of the files--most importantly, the ones you have changed/updated.
Here's the thing to understand; a lot of times, updating a site means changing only a file or two. Most of the time, the file you made changes to, (or the Page, even) will retain the same name. Regardless of what is in the file/page, it is still called up/indexed by it's name. So if you update a file/page/etc., swapping out the updated file/page involves simply exchanging the correct file(s), one with another, identified by their names.
Now let's take the example you have posted. You have correctly identified the Sites files in a typical iWeb-created folder structure. In the Blog, (which is what this site basically is--a blog updated by yourself) you should see a folder structure like this:
Now, there's a ton of stuff in a Blog. So when you update your blog, nevermind trying to parse out the files held within it; just swap out the entire Blog folder.
So in other words, let's say you just updated your Blog, and all you want to do is just upload the Blog updates without uploading the entire site. You have made the changes in iWeb (i.e., created a new Blog entry); now you need the html for these changes. File/Publish to a Folder.... Open the Site folder you published to--you will see the same file structure pictured above. Delete the Blog folder in the local file for Dreamweaver, and then drag the newly published Blog folder into it's place. As I said in my previous post, when you open the Files window in the Dreamweaver app, click the refresh button and the new Blog folder will be in place, locally, for upload. Highlight the folder and click the blue "Put" arrow (upload) button.
Your Blog updates, and only your Blog updates, will be uploaded to your server. They will overwrite the existing Blog folder on the server, with all of it's contents, and your Site/Blog is now updated.
Same thing applies for your Home page, or any page. Whatever page you make changes to, those are the Page_files and page.html that you want to exchange on the server. (The Blog.html is within the main Blog folder).

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Any program avilable to see the Unix file into PC

Similar Messages

Maybe you are looking for