Any program to active InfoSet at BW Production - BI 7.0?

Any idea for BI 7.0 , any idea how to active InfoSet under production machine?
For examples to active DataSource for production we will used :-
RSDS_DATASOURCE_ACTIVATE_ALL
Thanks in advance.
Edited by: Edi Erwan Abu Talib on Nov 11, 2008 8:38 AM

Hi check this link ..
transformation program RSQ_TRANSFORM_CLASSIC_INFOSETS.
http://help.sap.com/saphelp_nw04/helpdata/EN/ad/2225391d4f000be10000000a114084/content.htm
hope this helps
Regards ,
shikha

Similar Messages

How to find Transactions/Programs are Active or Locked

Hello Friends,
How to find, what are all the Transactions/Programs are Active/Locked in the Production(PRD) Environment.
Is there any table or transactions available to find it out?
Please assist.
Regards,
Shrinivas

- To be confirmed : look at field CINFO in table TSTC, if it contains hexadecimal values of '80', '01', '02' or '20' it is locked (not sure, check)
- Use a call 'DY_CHECK_TRANSACTION' id 'TX' <tcode> if sy-subrc = 3 the transaction is locked.
- Use a call FM AUTHORITY_CHECK_TCODE, if NOT_OK is raised and the message i348(s#) is sent the transaction is locked
- First check via AUTHORITY-CHECK OBJECT 'S_TCODE' ID 'TCD' FIELD <tcode> and if the object is allowed but NOT_OK is raised by the FM AUTHORITY_CHECK_TCODE, the transaction is locked.
Regards,
Raymond

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?

There are many a thousands of people who are producingvideos on completed DVDs. As an amateur videographer using iMovie first nowusing Final Cut pro to produce completed ready to distribute DVDs, I find ithard to believe at the meeting you mentioned anyone with common sense wouldhave explained the scenario above. On an amateur level so many folks have beencreating videos of Weddings, Home Movies, and many different Special Events. Onin particular are sports events. I shoot a sports event like Mix Martial ArtsEvents utilizing several video cameras. Then editing with Final cut Pro andsometimes iMovie. All of my completed videos that have been edited in either ofthese two programs are shared (like hand in glove) with iDVD. Short of steppinginto the commercial world Apple has deleted many people from producing a semiprofessional looking product.
I do not know if the can be answered here in the format buthere it goes!!
Simple question. Since apple has extinguished iDVD Are thereany other Software programs that can produce the end product iDVD did? Googlesearches with years of outdated info does not give good references. Withoutlooking to go commercial, the Apple Macintosh Computers built internal Softwareprogram like iDVD is the only program I know of that can help folks on mylevel!!
It doesn't seem there are any programs that takes off fromwhere iDVD left off. My end products (complete videography from start tofinished printed and burned DVD) needs to have the mapping and control usingthe semi professional look iDVD gave!
Have any ssuggestions?

Thank you Klaus 1
I have 4 latest Macs All have iDVD. The question was not where to get iDVD.
The question for anyone who knows is: Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?
I appreciate your input but it realy does not answer the question. iDVD will soon not be able to work with newer versions of Macs as it has been left behind by Apple!
Once again:
It doesn't seem there are any programs that takes off from where iDVD left off.
My end products needs to have the mapping and control using the semi professional look iDVD gave me.
Imovie cannot do this. More importantly imovie cannot save the project to Video_TS folders like iDVD did.
Anyone have suggestions?
My full post is just below:
There are many a thousands of people who are producing videos on completed DVDs. As an amateur videographer using iMovie first now using Final Cut pro to produce completed ready to distribute DVDs,
On an amateur level so many folks have been creating videos of Weddings, Home Movies, and many different Special Events. One in particular are sports events. I shoot sports event like Mix Martial Arts Events utilizing several video cameras. Then editing with Final cut Pro and sometimes iMovie. All of my completed videos that have been edited in either of these two programs are shared (like hand in glove) with iDVD. Short of stepping into the commercial world Apple has deleted many people from producing a semi professional looking product.
I do not know if anyone can this question but here it goes!!
Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did? Google searches with years of outdated info does not give good references. Without looking to go commercial, the Apple Macintosh Computers built internal Software program like iDVD is the only program I know of that can help folks on my level!!
It doesn't seem there are any programs that takes off from where iDVD left off. My end products (complete videography from start to finished with printed and burned DVD) needs to have the mapping and the control by using the semi professional look iDVD gave!
More importantly imovie cannot save the project to Video_TS folders like iDVD did. Something for folks like myself who need this to burn to our multi burning DVD all in one printers!!
Anyone have suggestions?

How to active the transformations in production system

HI
How to active the transformations in production system when Time stamp error occured in SAP BI.
In SAP BW we use RS_TRANSTRU_ACTIVATE_ALL for tranfer rules activation.Is there any chance Activation allowes in production system witout any ABAP programme running.

Hi Gkreddy,
There is a specific program for that: RSDG_TRFN_ACTIVATE. It will also re-activate the related DTPs.
Please check the following SAP Notes:
#1408161 - Program for transformation activation.
#1471117 - SP25:RSDG_TRFN_ACTIVATE skips if M version has OBJSTAT 'INA'.
BR

Internal order - any program to reconstruct actual and commitment figures?

If internal order is activated later, is there any program that can update the IO actuals/commitments based on PR / PO / FI documents which are assigned to the respective IO?
I think for commitments, the program is RKANBU01, correct? How about actuals from goods/invoice receipts or FI docs?
Thanks

for commitment values the report is RKANBU01 (see note 152571 for reference)
For document transfer from FI to CO you can use transaction OKBA
You can also check notes 45122 and 98520 explaining how to
post FI doc.subsequently w/o acct assgnmnt to CO
hope this will help you

Need to Check whether the program is Active or not

Is there any statement where i can check whether the report program is Active or not.
Using below statement i am copying the entire Code in internal table it_source.Before copying in the source code in the internal table it_source.I need to check that program is Active or not if it is not active and i need to give a pop message and forceliy i need to Active it.
read report wa_trdir-name into it_source.

Hi Srini,
i just checked the table REPOSRC for a program which was not activated, i got two entries for the program one as active and one as inactive ,as soon as i activated the program there was a single entry.
so is it that we should check if we have any inactive entry in the table for the program?.
Regards,
gunjan

Is there any FMs to active objects programatically?

hi, dear all:
Now i am facing one tough issue:
i should develop one ABAP program to active/deactive the given objects(such as: report/module pool, DDIC objects, FMs, etc) whose name can be input in the selection-screen.
I wander: is there any FM in ECC 6.0 which can be used to meet my requirement??
Thanks very much,
Best wishes,
Edison_tc

Would you consider telling the community what you found?
You asked for help initially, now I think it would be fair to share your new knowledge.
Thomas

MacBook pro late 2011 (4G, i7) very slow to load any program after installing Mavericks

After instaling Mavericks, my Mac has slowed down so much, when I turn on my Mac it takes forever to load, and after it loaded, takes longer (then what it did before) to load any program.
Any help please?
My specs: MacBook PRO 13" late 2011, 4Gb RAM, Intel i7 2.8Ghz System most of the times shows 90-97% on idle (yet slow).

Check activity monitor, if a keener activity is taking a lot of CPU resources then Try this link http://www.rdoxenham.com/?p=259
You will have to keep an eye on your temperature, but that's it.

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Any program for mac to download videos from website like youtube, dailymotion, and any video online?

Any program for mac to download videos from website like youtube, dailymotion, and any video online?

TOAST!
http://www.roxio.com/enu/products/toast/default.html?gclid=CIDu-MaizLACFQFeTAoda nEfWA
Ciao.

I can not perform software updates or download any programs. They appear in the download box as images that are not recognized. How can I fix this?

I can not perform software updates or download any programs. They appear in the download box as images that are "not recognized". I thought maybe my antivirus software was setting up a firewall, but I have disabled it, so that's not the case. Any suggestions as to how I can fix this?

If the downloads are gone, it's possible that Windows is removing the downloads based on security policies set in IE. I realize that sounds strange, but it's related to Firefox's feature of submitting downloads to your virus scanner and marking them as having come from the internet.
To test this theory, you could try disabling the scan feature. I assume you have good "real time" antivirus protection which checks every file saved to your hard drive. (If not, you really should get that, and you can use Microsoft's free [http://windows.microsoft.com/en-US/windows/products/security-essentials Microsoft Security Essentials] for now until you have time to review all the available choices.)
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''scan''' and pause while the list is filtered
(3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value.
Firefox now should ignore Windows' download security. Does it change how Windows handles the file?

Adobe Flash Player Active X and Plugin Product Codes

Where can I find a list of all the Adobe Flash Player Active X and Plugin product codes? I am creating an uninstall script to cleanup any old versions and would like a complete up to date listing.
This thread here has up to version 11.4 - http://forums.adobe.com/message/6048135#6048135
Thanks!

Hello,
Please refer to the MSI GUIDs tech note. This tech note is updated regularly with each release.
Maria

Actual activity price calculation for production order

Hi
Can any one guide me in how many ways we can assign actual activity price calculation for production order?
I knew only one way by assigning PPP2 costing variant?
I have another doubt is: if we don't mention any material valuation indicator (moving average, standard) in valuation variant, how system will calculate material prices? is there any other way, to recognize the prices by system?
regards,
Ramesh B

Dear,
Costing variant PPP2 is linked to some valuation variant inn OPL1
System will check the valuation of material and activity according to this valuation variant
For material valuation there are many stg acceding to which system will take the price the raw material,
Valuation strategy for material component
Strategy sequence that determines the valuation of the materials used in the cost estimate.
Use
The materials are valuated using the price in the material master record or the values calculated in a material cost estimate.
Procedure
You can enter a single strategy, or you can enter multiple strategies in the form of a strategy sequence. If you enter multiple strategies, the priority of the strategy determines what price or what values are selected.
Examples
Assume that the following strategy sequence is entered for material valuation:
1. Planned price 1
2. Standard price
3. Moving average price
If the system finds a value in the Planned price 1 field (costing view), this value is taken as the value for valuating the material.
If the system does not find a value, the value in the Standard price field (accounting view) is used.
If the material does not have a standard price, the system uses the value from the Moving average price field.
if you have not mentioned, then system will give error that "valuation stg not found"
Valuation strategy for internal activities and processes-
Strategy sequence that determines how internal activities and processes are valuated in costing.
Use
The activities and business processes used are valuated with the prices from Cost Center Accounting or Activity-Based Costing to determine the production costs or process costs. The prices can either be calculated iteratively through price calculation, or entered manually by the user.
Procedure
You can enter either a single strategy or more than one strategy in the form of a strategy sequence. If you enter more than one strategy, the priority of the strategy determines which price is selected.
Examples
The following strategy sequence is entered:
1. Actual price of the previous period
2. Plan price of the previous period
3. The most current plan price
If the system finds a price for the activity type, this price is used for valuating the internal activities. If no price was calculated for the previous period, the plan price from the previous period is used to valuate the activity type.
If the system cannot find a plan price for the previous period, it looks for a future plan price, using the next price in the posting period to valuate the internal activities. For example, if plan prices have been entered for periods 2 and 3, and a plan price is calculated in period 1 for period 4, the system uses the price from period 3 in accordance with the valuation strategy Most up-to-date plan price.
Again if you have not mentioned, then system will give error that "valuation stg not found".
You can use any costing variant for actual (PPP2)and planned(PPP1) according to your requirement.. check in OPL1

How to delete the payroll result by batch? have any program to do this?

Hi，
how to delete the payroll result by batch? have any program to do this?

With standard payroll deletion (PU01), SAP will not allow payroll results to be deleted if it already reaches certain steps of payroll process (e.g. Pre-DME, DME); instead, you would have to do payroll a void or payroll reversal. This utility doens't check for that, and only delete payroll results based on the criteria given. This therefore could cause inconsistency in production if your payroll process already surpasses certain steps.
Rgds.

Any program to active InfoSet at BW Production - BI 7.0?

Similar Messages

Maybe you are looking for