Any quick documentation to setup OSB for a WIndows server running Oracle 9i

Can I use Oracle 10g OSB to take backups of Oracle 9i databases? Any one has quick documentation tosetup the OSB? Please send me the link to:
[email protected]
Thanks very much
Mahesh

All the documentation including the Installation guide that covers your question is included in the download available on OTN here
http://www.oracle.com/technology/products/secure-backup/index.html
When the download is uncompressed their is a doc directory in the path containing the Installation Guide.

Similar Messages

Windows setup could not configure Windows to run on this computer's hardware.

Just over a month ago, I purchased 6 identical Lenovo B5400 laptop computers for a small charity. Each is preconfigured with Windows 7 Professional, with a Win 7 recovery partition, and is supplied with a set of Windows 8 Pro recovery media (the charity
requires Windows 7 installed). I unpacked three laptops, configuring the first one as required by the charity, and using the second and third to experiment with the sysprep / imagex process before applying it to the configured system for migration to the other
laptops. After securing the second and third laptops by taking image backups, I applied sufficient configuration to the second to test the process, then sysprep'd it, and imagex'd it to a network drive, and to a USB stick. So far so good. After using imagex
to apply the custom .wim file to the third laptop, I found it booted up through the "updating registry settings", "starting services", and "installing devices" phases, but when it got to "applying system settings", it
displayed a messagebox titled "Install Windows", with the message "Windows Setup could not configure Windows to run on this computer's hardware". In the last few days, I have explored all the other incidences of problems with similar
symptoms found by a google search, including those on this forum, and tried numerous experiments without getting any further (in most cases not even getting as far)". The sysprep'd image on the second laptop boots ok, going through the same phases up
to "applying system settings", then reboots normally, requests username and PC name, etc, the only defect being that it loses the Realtek display driver (which only takes 2 minutes to restore). I have tried imagex /apply to put the custom .wim file
back on the same laptop it was taken off (the second laptop), and it works exactly the same as it did for the same system immediately after sysprep'ing. The only difference between laptops 2 and 3 is a serial number (QB07523967, and QB07524012). Is there any
reason that this should not work? If it will not, I'm faced with about 100 hours to configure the 6 laptops individually to the charity's requirement.

Hi,
This issue can be caused by hard disk settings in bios or DVD drive or bad SATA cable. Please try those steps below:
Upgrade the BIOS to the latest version; go into the BIOS and activate "Load Fail-Safe Defaults".
If you connect the SATA drives, please set the SATA controller to compatible mode in BIOS.
For more information about this issue, please refer to the article:
http://support.microsoft.com/kb/2466753
Andy Altmann
TechNet Community Support

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

Installation problem because errer message of "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE"

Respected Sir,
My name is Md. Naushad, contact No- 9436507010.
Sir, hamara ek shopping mall hain, jismein ek server and 5 nos. cash counter clint pc hein, server ju computer hein ismain hamne WINDOWS SMALL BUSINESS SERVER 2008 original os use kar raha ho, yein server calte hue humnein pehele bhi 3-4 bar format korke
dubara ready kiya tha, job koi problem huta tha tu, kuch din pehele se server mein firse problem ho rahi thi (server open nehi hu rahi thi, tu hamne data backup leke pehele jis tarha se server install kiya tha usi tarha se humne install karne ki kusis ki tha,
tu jab humne windows small business server 2008 software ka original disc-1 se installation start karti hu tu kuch der install huke ek error message aaa rahi hein, ju ki "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE."
yein message aa rahi hein, jiske baad server installation bech mein hi band hi jati hein, jiske karon hum server ready kar nahi pa rahi ho, so plz help me, ta ki mein server ku firse install kar sakti ho.
we wait for ur valuable response, plz help us sir.
Thank u.

Hi,
Sorry for my delay.
Based on the error message, please refer to following similar thread and KB, then check if can help you.
SBS
2008 SP2 " Windows Setup could not configure Windows on this computer’s hardware"
“Windows Setup could not configure Windows on this computer’s
hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
However,
please understand that these forums will provide support in English. Since we do not familiar with this language which you use to describe this issue, it is very difficult
for us to help you with your question. If you could ask your question in English, I will be very happy to help.
If the issue is urgent to your business, it is recommended that you contact Microsoft Product Support Services
via telephone so that a dedicated Support Professional can assist you recover the server in a more efficient manner. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/contactus/?ws=support&ln=en-us
If you are outside the US please see
http://support.microsoft.com/ for
regional support phone numbers.
Thanks for your understanding.
Hope this helps.
Best regards,
Justin Gu

"Windows Setup could not configure Windows to run on this computer's hardware" error using MDT

Good day. I am using Microsoft Deployment Toolkit to deploy images to a group of ClearCube R3080D bladed PCs. Below are the server details:
VMware virtual server with Server 2008 R2 Enterprise Service Pack 1
Microsoft Deployment Workbench Version 6.1.2373.0
Management Console 3.0 Version 6.1(Build 7601: Service Pack 1)
Windows Deployment Services Version 6.1.7600.16385
The image I am deploying to the blades is that of Windows 7 Enterprise x64 Service Pack 1 with Office 2010 and a few other third-party applications.
I have pushed this image to literally hundreds of blades successfully. I had a problem with one blade and found that the HDD was faulty. I RMA’d that HDD and installed the replacement. I pushed the same image to the blade and it works fine to the very end
then I receive the error ”Windows Setup could not configure Windows to run on this computer’s hardware.”
I have checked the BIOS configurations on this blade and they are identical to those of several known good blades. In fact, I swapped HDDs between a known good blade and the blade in question. The problem seemed to follow the HDD. Therefore, I assumed that
ClearCube sent a faulty HDD. I had the identical problems with a second HDD from ClearCube so I’m sure that the HDD is fine.
I have read through http://support.microsoft.com/kb/2466753
as well as many other questions posed by other folks and I have yet to find a good solution.
Again, this image works on all other blades that are of the same model and the HDDs are also of the same model. I'm quite confused!
Tony

Tony?
What are you doing posting the same question 5 times, within 3 hours???
http://social.technet.microsoft.com/Forums/en-US/67f72721-da1b-42bc-b373-9064fe1a8245/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/9e7ca626-5b67-4a3f-ade0-4bac767e060f/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/8c508acc-ad40-4608-911c-fbfbc5e293fe/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdthttp://social.technet.microsoft.com/Forums/en-US/a8a98fce-0ddf-4a59-ba8a-9acab7de0c5e/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
If this post is helpful please click "Mark for answer", thanks! Kind regards

Vhost configuration for Adobe Media Server running under linux.

Please help me with Vhost configuration for Adobe Media Server running under linux.
I was running a media sharing website for which I wanted to use Adobe Media Server.
To use, AMS, I disabled the already installed Apache server and installed AMS along with the built in Apache server. I could successfully install AMS and could login to AMS Admin Console through my IP number.
My existing website, www.mydomain.com is having its contents located at:
/home/mydomain/public_html
(Directory created under the old version of Apache not bundled with AMS)
Users will be uploading their videos, which will get transcoded and will be delivered to the website visitors in the existing scenario.
To use this website with AMS, this is what I did:
I created a folder for my domain, www.mydomain.com as below
/opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
Copied Application.xml and Vhost.xml from /opt/adobe/ams/conf/_defaultRoot_/ and pasted them in /opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
In the Application.xml file there are 2 entries:
<Alias name="mydomain.com"></Alias>
<AppsDir>${/home/mydomain/public_html}</AppsDir>
Please help me with further steps to be completed:
Do I need to create a separate VirtualHost entry in the Apache installed with AMS?
If yes, can I specify already existing document root for my website (/home/mydomain/public_html) or do I need to create a separate folder under webroot/Apache ?
If yes to point 2 above, then do I need to copy all the existing contents from /home/mydomain/public_html to the newly created folder ?
I hope, I can serve all my static contents like html pages and php and media like video/audio. In that case do I need create alias to my Media/Alias folder or AMS will automatically start streaming when a video/audio is requested ?
What other steps do i need to complete?
Any help in this regard would be highly appreciated.
Thanks and Regards

Dear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day!

What standards are used by Microsoft for developing Windows Server and other products

Where can I obtain or solicit information regarding Microsoft software development process compliance with national/international standards? I need to create regulatory documentation, and knowing which ISO, IEC, ANSI, etc. standards that Microsoft uses to
develop specific applications (including but not limited to Windows Server 2012 Standard) would be most useful.
My efforts to obtain this information (live chat, calls to different support numbers and tweeting) have been fruitless.
Any help would be much appreciated.

As to the 'broken' link. The editor in the forums has a nasty habit. If one concludes a sentence with an URL and puts a period after the URL to designate the end of the sentence, the forum editor includes the period as part of the URL.
Delete the period and the link will work.
What do you mean by 'standards' for software development? If you mean something like ISO/IEC 12207, I think you are going to have to search Microsoft web sites and then see if you can strike up a conversation with authors of articles you find.
I am not aware of any specific publication of conformance to such standards within Microsoft. Even though I worked for them for 12 years in a non-engineering role, I tended to take an interest in this sort of thing based on interests developed in previous
roles.
Here is a link (http://www.microsoft.com/security/sdl/resources/publications.aspx) and here (http://www.microsoft.com/security/sdl/default.aspx) that
covers their Secure Development Lifecycle. To a great extent, Microsoft 'wrote the book' on how to do secure development (http://www.barnesandnoble.com/w/the-security-development-lifecycle-michael-howard/1110830298?ean=9780735622142).
It may appear dated, as it was published about eight years ago, but it became the textbook for some college courses on secure development.
. : | : . : | : . tim

WCF service application hosted in IIS for reading Windows server service bus topic/subscription

We have a WCF service application(not web application) which is deployed in IIS 8 pointing to the windows server service bus topic/subscription. We have configured the WCF service with applicationInitialization feature of IIS 8 to warm up.
But the WCF service is not reading any message from the topic/subscription.
configured in web.config file as below
<system.webServer>
<applicationInitialization>
<add initializationPage="/MyService.svc" />
</applicationInitialization>
</system.webServer>
When we run the same from visual studio its reading messages from topic/subscription.
any configuration/settings which we are missing?

You probably didn't initialize correctly the auto-start. Btw. I would recommend you to use AppFabric for this feature. It is more transparent in development and production.
Please take a look on following posts:
http://social.technet.microsoft.com/wiki/contents/articles/1284.host-wcf-services-with-service-bus-endpoints-in-iis-and-windows-server-appfabric.aspx
http://developers.de/blogs/damir_dobric/archive/2009/10/11/iis-7-5-and-always-running-web-applications.aspx
http://developers.de/blogs/damir_dobric/archive/2010/06/11/appfabric-issue-with-aoutostart.aspx
Damir Dobric
developers.de
daenet.de
daenet.eu
daenet.com

Disk Partition for EHP4/Windows server 2008/SQL server 2008

Hi All
What is the drive partition recommendation for EHP4 ERP6 on Windows server 2008 and SQL server 2008? I have checked the notes/ SAP Documents but have not find any information related with SAP recommendation on this. Please help.
I need the recommended partition size for SAP application , transaction log, SAP datafiles , MS SQL server installation files for DEV/QUA/Production
If you have a similar landscape for EHP4 , can you check in your DEV,QUA, Production set up and tell the allocated and used partition size for SAP application, transaction log, SAP datafiles, MS SQL server installation files.
Regards
Sahad

Hello Sahad
As described by Markus and also, i want to share my company landscape information.
We are using HP SAN Environment with using the SAP SR2 SQL 2005 and Win 2003 on HP Itanium Processor.
We had reserved and present the following vdisk from the SAN Environment to the PRD server.
F:\DATABASE                     600GB   RAID 5      ( still 200 GB free ** we lived our system on 1 Aug 2007)
L:\TRANSACTION LOG         30GB   RAID 1      ( Expanded up to the disk space ** make backup 4 times a day )
T:\TEMPDB                              1GB   RAID 1
K:\KERNEL                         100 GB   RAID 5       (30 GB Free ** updaing kernely and EW tools upon the latest availability)
Regards
Anwer Waseem

Windows setup could not configure windows to run on this computer hardware

As I was trying to reinstall win 7 on my HP Pavilion dv6-7028tx Enterta laptop, upon competition, I was given this message by win7 saying that " windows setup could not configure windows on this computer's hardwear".
I did some research on this issue, it appeared to be the lack of SATA drivers on my computer.　
Could you please advise me which intel SATA driver should I installed to fix the problem?
If this method doesn’t work, then can you please tell me how to change the BIOS hard disk drive setting to AHCI or IDE?
Many thanks
This question was solved.
View Solution.

Hi:
You can't change the drive controller setting in the BIOS on any HP consumer notebook made in the last 5 - 6 years or so.
See if this works...
Download the drivers from this link below (first file listed -- 64 bit).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...
Extract (copy) the files onto a usb flash drive without any folders.
With the flash drive and W7 installation media in the machine, boot from the W7 installation media.
After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
You should now see the storage driver files listed.
If you check the box, it will only include the compatible driver.
Follow the prompts and hopefully, W7 will install.

Which oracle software is suitable for Microsoft windows server 2003

Hi,
I'm suppose to install oracle 9i,10g on the system which i mentioned below.
Which oracle software is suitable for the system?
System:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Computer:
Intel(R) Xenon CPU
E5335 @ 2.00Ghz
2.00Ghz, 2.00Gb of RAM
Waiting for your suggestion.
Thanks, Muhammed.

Thanks for your quick response.
As you said v11 can be installed and
Could you please say about the bit (32 or 64bit)? which oracle binaries i can download
because my system configuration is server 2003 - 64 is bit xeon process.
Many Thanks,
Muhammed

10g R2 64-bit Oracle Database for MS Windows server 2003

we are upgrading our 10.2.03 32 bit Oracle Enterprise DB on 32 bit MS windows server 2003 to 10.2.0.3 64 bit Oracle Enterprise DB 64 bit MS windows server 2003
I got this Metalink ID
Doc ID: 403522.1 How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows
I have searched for 10g R2 64 bit Oracle databases versions on MS windows server 2003 but din't gent any
I am not sure whether this database works for 64 bit MS windows server 2003
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winx64soft.html
please let me know from where I can download 64-Bit 10g R2 Oracle Enterprise DB for 64-bit MS windows server 2003
Have posted in
English » Technology Network Community » Downloads section haven't seen any replies
thought of posting here
Thanks in Advance

If you are running the x64 version of Windows 2003 and not the Itanium version, you will find 10.2.0.1 here:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winx64soft.html
You may then patch it to 10.2.0.3 by downloading the patch from Metalink.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Upgrade to Server 10.8 for Mac Mini Server running Server 10.7.5?

Hi—I am seeing references to OS X Server 10.8 yet my Mac Mini Server (mid-2011, machine identifier "Macmini5,3") is holding firm with OS X Server version 10.7.5.
There are no pending updates for this machine either through OS X (software updates) or through the App Store.
Will this machine eventually go to 10.8 through routine updates, or is this something I have to buy?
Searching the App Store for "OS X Server" returns the Server utilities. One of the main headings under it is "What's new in Version 2.2.1".
Should I sit tight, or jump into the forced upgrade fray?
Thanks for any thoughts! —michael

Thanks John.
Are you saying that to move to the next "level" (10.8.n) that indeed the "Server.app" is what I need to do?
Seems awfully dicey. Why isn't Apple pushing me something called "OS X Server 10.8 Upgrade"?
I have to first "buy and upgrade to Mountain Lion i.e. 10.8"?
"The upgrade from 10.7.5 to 10.8 is not free".
Money is not an object here. Again, the PATH TO UPGRADE isn't being provided through any internal systems (a.k.a. Finder/../Software Update).
This is a huge mis-step for Apple.
Sure "Mavericks" is soon due. And I'll bet that the path to (seamlessly) move from 10.7.5 is even more obscure.
—michael

Hardware Requirements for a Windows Server 2012 Domain Controller.

Hi,
I have a secondary office with 10 users with a domain controller that has reached its end of life. We like to upgrade the current hardware to serve as a domain controller and potentially as an onsite file server that will sync with head office during
off peak business hours.
Any recommendations for a low cost yet reliable hardware for the above solution ?

Hi,
Thanks for your post.
I think you need to meet the requirement for upgrading to windows server 2012r2.
http://technet.microsoft.com/en-us/library/hh994618.aspx#BKMK_SysReqs
And you could refer to the following article about windows server 2012r2 domain controller configuration
Building Your First Domain Controller on 2012 R2
http://social.technet.microsoft.com/wiki/contents/articles/22622.building-your-first-domain-controller-on-2012-r2.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Converter program for MS SQL Server to Oracle

My problem with converting MS SQL Server queries in a SQL Pass-thru is becoming critical at my job.
I am hoping there is an easy converter tool that will let a user take SQL Server statements and feed them into a converter that outputs Oracle SQL.
Does such a program conversion tool exist?
I bet not, right?

Your bet is right as SQL-Server's SQL implementation is not the same as Oracle's SQL implementation. There are numerous differences. Translating one to the other is not a 1:1 keyword swap.
And when these SQL statements involve locking and concurrency, there are also significant differences in core database functionality between SQL-Server and Oracle.
What exactly is the problem you are facing? SQL-Passthru is specifically designed as a SQL interface that does not touch and change (and muck up) a SQL being passed to a remote database - so the actual raw SQL text being send is what arrives at the server end. Allowing you to, for example, use Oracle's SQL dialect inside SQL-Server to talk to a remote Oracle database - without SQL-Server throwing errors about Oracle dialect being used. Oracle has a similar passthru option.
Why is this not working? Or is the issue something else?

Any quick documentation to setup OSB for a WIndows server running Oracle 9i

Similar Messages

Maybe you are looking for