Any recommendations with respect to the best ipad 2 cover
What is the best ipad 2 cover? Looking for maximum protection front and back
I'd suggest looking for a portfolio cover. One that the iPad can slide into with a heavier front cover. I got mine from anazon, a nice pretty purple leather which I'm sure won't be to your tastes
However portfolio cases do seem to provide the most functionality and protection.
Now none of them really provide muchh protection against accidental drops. There are ones like Otterbox that do have more chunky looking cushioning, but none of them are perfect either.
Similar Messages
-
Over all my cases i have had i over all think the griffin ipad 2 surviver case is unreal
Build quality: it comes as a two piece item. An internal plastic cage with a clear screen protector holds the iPad, and a thick rubber shell fits very snuggly around this. It has been designed to fit together very well. I do take the claims on water, sand and wind with a pinch of salt, but I would say that I am a lot less worried about damaging it now.
Access to buttons: there are flaps to the various sockets and these are easy enough to open. I am not 100% sure on the one for the mic at the top, as it seems a little flimsy compared to the others. However, the buttons for volume, sleep and menu have been engineered very well indeed. In fact, altering the volume is much easier than without the case on. The front camera is permanently available, and the rear one has a flap you need to hold back if you want to take a shot (but as the weakest feature of the iPad, it's only good for videos). One big drawback for me is that although you can get the standard dock connector on fine, you cannot get the camera connector kit on without dismantling the whole thing. A right royal pain as I use this quite regularly.
Look and feel: ok, so you can get rid of the "look at my ipad2, isn't it slim and light" attitude with this. However, you can replace it with a "look this bad beast" smugness. It looks secure, it looks safe, and, in my opinion, it looks kind of cool in a rugged way. The rubber feels great and grippy, it's textured well with a soft, tactile surface.
Screen protector: I like the idea of a screen protector, but it was a bit `squeaky' when using the device, and it seemed to offer some resistance. I had read on one review that it could scratch easily. Looking at the material I could well believe that. My laughable solution? I cut down a regular screen protector and put this on top! So now I have a screen protector, the case's screen protector and another screen protector. Is my mild autism showing now?
Stand: it also comes with a clip on stand that attaches to the sides when in portrait mode (and so top/bottom) in landscape. A useful extra. It's not the most well-engineered piece of plastic I have ever seen, but it does what is needed and grips very well. It gives a good angle for typing as well as a more vertical one for resting/viewing on a desk or similar flat surface.
Price: it is in the range of what seem higher-quality cases. I treat this as part damage insurance, so don't mind the extra premium if it saves the device from destruction.
Summary: as a protective case, this does exactly what is needed. It has combined sturdiness with a terrific design. I feel that I can put this down anywhere, in any bag and even out and about in dodgy weather. I am less worried now.
For a mobile device, protection is what I wanted. 9/10 (1 off for the camera connector issue)
any questions i can answer!!!!!!!!!For my iPad 2, I bought an Adesso case/keyboard model WKB-2000CD http://www.adesso.com/en/component/content/article/49-coming-soon/455-wkb-2000cd .html Works great & looks good. The keyboard is easier to use than Apple's on-screen keyboard. Do a Google search using the model number to get the best price. About the same price as Apple's covers & it covers the whole iPad. Although the new iPad is slightly thicker, it should fit this case.
Cheers, Tom -
What is the best ipad to get? ipad 1 with 64 gb or a i pad 2 with 16 gb
What is the best ipad to get? Ipad 1 with 64gb or a ipad2 with 16gb? Does a ipad2 *** with a 64gb?
Welcome, trishkay!
King_Penguin has given you some great input, but you have not given him any feedback. Perhaps you are waiting for more suggestions from others? Here are my thoughts on your question:
trishkay wrote: What is the best ipad to get?...
Wait for iPad 3 and buy as many "gb" as you can afford.
trishkay wrote: ... Ipad 1 with 64gb or a ipad2 with 16gb? ...
What you can afford with enough room for the music, pictures, videos, and apps you must have.
trishkay wrote: Does a ipad2 *** with a 64gb?
Definitely.
Message was edited by: EZ Jim -
hi there
im looking to buy an ipad- we use SIMS at school and i need to be able to log into it. I can via a virtual desktop via the college wireless netork. I also have work on the network. What would be the best IPAD to buy?You have the choice of a full size iPad or the iPad Mini...both come as either WiFi only or WiFi+cellular data service. With the cellular data model you can see if there is a SIM available that is appropriate. Either model is capable of attaching to a wireless network to give you access. Neither is capable of a wired connection, must be wireless.
So, the question is which size is the best for your personal use, and do you want cellular data access - great thing to have. Then the decision is which storage capacity do you want...keep in mind that the iPad is not upgradable after purchase so get the storage you really want to start out. -
What is the best Case/Cover/Sleeve for the iPad 2!! or combination!!
Ok, I am literally lost with all the varaities out in the market....
Now putting the Smart Cover aside... what do you think guys is the best iPad 2 case, cover, sleeve or anything... something that is slim nothing bulgy!!
or any combination of the above even with the Smart Cover...
what do you think guys
Thank you for the advice
S.I use my iPad in some high risk situations (a classroom/my studio/field work) as well as just sitting on the couch or out on the patio. I like to "layer" so here's my arsenal.
For me the Smart Cover's a must. It makes the iPad much easier to hold, protects the screen and, being lazy, I love the instant off feature (and the blue color).
To make the iPad less slippery for classroom use I've added a Cover Buddy back in blue. It has a rubberized surface like the poly Smart Covers.
http://www.switcheasy.com/products/CoverBuddy/
I always transport my iPad in its own compartment in this small neoprene messenger bag, which also holds accessories, a book or file, and my Kindle:
http://www.builtny.com/neoprene-messenger-bag-11-13-inches-prod.html
Then, for traveling and field work, I slip the iPad with the Smart Cover and Cover Buddy still on it, into this neoprene hooded case, which has a rigid plastic lining to protect the back and sides. Then that whole thing goes into the neoprene bag again.
http://www.builtny.com/hoodie-netbook-case-7-10-inches-prod.html
Last but not least, my best case is a two year accidental damage warranty from Square Trade. A lot of piece of mind for 70 bucks. -
I was under the assumption that waveform charts in LabVIEW 6i atomaticly displayed wired data with respect to time in seconds. However, I noticed that my chart plots data with respect to the number of data points my VI has generated. Is there anyway to fix this so that the chart actually plots vs. time. I've attached VI. The CIN is to a Computerboards Inc, thermocouple. Any help would be appreciated.
Attachments:
tepTInScan.VI 73 KBIt appears that the chart is set to display relative time but since you don't have the acquisition in any kind of a loop, your relative time is pretty meaningless. You've got the dX of the chart set to be one, so yeah, at the beginning, the x scale numbers are going to be the same as the number of aquisitions until you've run it more than 60 times. At this point, you'll see the x scale show minutes and seconds. If you want absolute time for the x scale, look at the examples Real-Time Chart.vi or Variable-Time Chart XY.vi.
-
Synchronization with respect to the memory model
Hi
Can anyone give paste me a link (other than to the JLS itself) that describes the meaning of synchronization with respect to the memory model rather than simply as a means of mutual exclusion?
You read that without synchronization different threads can have inconsistent views of what should be the same data. The link below talks of this issue but says 'the causes of memory consistency errors are complex and beyond the scope of this tutorial.'
http://java.sun.com/docs/books/tutorial/essential/concurrency/memconsist.html
Many thanks
BruceThere are many articles and a few book chapters or
parts thereof that deal with the new memory model,
and of course some key websites. The primary website
is:
http://www.cs.umd.edu/~pugh/java/memoryModel/
Brian Goetz has written a number of articles on IBM's
DeveloperWorks, and of course this is covered in
great depth in "Java Concurrency in Practice" by
Goetz et al.
I also covered it in the threading chapter of "The
Java Programming Language, 4th edition". :)
A few key points:
- access to volatile long/double has always been
atomic (old JMM and Java 5 JMM), but remeber that
access means a simple read, or a simple write,
something like ++ is not atomic because it is a read
followed by a write
- don't think of this in terms of "caches" - that
will lead to the wrong reasoning. It isn't about
flushing caches or writing to main memory (that was
the old conceptual model that just gets people into
trouble because they keep trying to reconcile it with
how the hardware chaching works). The new memory
model is all about establishing happens-before
relations ships between writes and reads of a
variable, so that the value allowed to be returned
from a read is the most recent value that was
written.
I was under the belief that the previous MM was writen in the way that it was in order to allow flexibility in terms of instuction/read/write reordering, caching, synch block merging and any number of other things that may occur, such that vm's on various architectures could be written efficently.
Of course it could have been that vm writers on those various architectures took advantage of the slack nature of the spec to implement all of those non-standard interpretations of the spec :). Its definately a good thing that the spec has been redefined to make it clearer exactly what a java develper should expect.
- the definitive source for this is actuall the
JSR-133 specification. Chapter 17 of the JLS 3e is
based on that spec but doesn't contain the full
details. (But you are better off reading Ch17 than
the proper spec :) )matfud -
What is the best iPad to get for elders/old people?
Hello.
What is the best iPad model to get for old people/elders who are over 60 years old? I assume iPads' iOS can do DPI to adjust sizes for bigger
visuals. Also, it needs to work well with both English and Chinese
Thank you in advance.antdude wrote:
, it needs to work well with both English and Chinese
All iPads can read and write Chinese and can also have Chinese user interface. They can even accept Chinese handwriting input. Plus Chinese SIRI, Dictation, and Dictionaries. See
https://www.apple.com/ipad-air/specs -
Hi,
In one of my dll (VS2010), the process Skipping target "MetaGen" because all output files are up-to-date with respect to the input files.
it is at random. I have checked the time stamps of the dll and metagen.write.1.tlog both having the time stamp on the failed build. But all files in release folder did not have the same time. They are one hour earlier than the dll
and the metagen.write.1.tlog.
On the good build it said the input file is is newer than output file ".\Release\\metagen.write.1.tlog" and allfiles in the release folder have same time stamp.
Any clue to solve this ?
Regards,Hi,
Based on your post, I am not very clear about your issue. I feel your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Could you please provide us more information so that we resolve your issue better?
What type of project are you working with? C++ MFC project?
How was the
metagen.write.1.tlog file generated in your project?
What error messages did you get?
What is the 'input file'?
If possible, please provide us a sample project to reproduce your issue.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Whats the best ipad flash app?
what is the best ipad flash app for the ipad2
There's only browsers and they all have mixed reviews. I'd look through the App store and see which ones have the least issues with what you need it for.
-
I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
I need to have a relative path to my download directory with respect to the profile folder.
Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36) -
Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
raise form_trigger_failure;
else
execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi. -
Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...
elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download. -
I just downloaded a lot of PDF textbooks to my ibooks, and now it crashes within seconds of opening the app. I have tried restoring the iPad and just updated the iBooks to 3.1. Any ideas? I have the new iPad.
What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs. -
What is the best iPad app to do basic editing of movie clips?
What is the best ipad app do some basic editing (top and tailing and deleting unwanted segments) of movies loaded to iPad directly from camera.
Iam going on a cruise and will not have access to my computer.
Thanks.IMovie : Apple : is the best App for Video Editing,
After you Edit Movie it will be stored on the Ipad.
You would require 32 or 64 GB IPAD, Video does take a lot of space.
Maybe you are looking for
-
How to delete sent emails in bulk
How to delete sent emails in bulk
-
Is it possible to connect MBPR with Cinema HD Display 30" 's Firewire Port for iSight
I want to buy a external iSight for my old Cinema HD Display 30" ,as i don't have enough space to open my notebook to use the built-in iSight camera. I know they are very old item, but i think they have very beautiful design and great quality, i want
-
I have a Windows 2012 R2 server that has the WSUS, WDS and DHCP roles installed. I also have a SCVMM (Win2012R2) server on different machine and it has been connected to the WDS server Followed many different guides on the internet to configure the W
-
Deleting quotation items with BAPI_CUSTOMERQUOTATION_CHANGE
hi everybody, i try to delete single line items/positions in quotations by calling BAPI_CUSTOMERQUOTATION_CHANGE. The return table is always filled with success-messages but somehow when looking at the transaction VA23 the line items are still presen
-
CCMS for MTE Class CCMS_DB_mcmtc
Hello! I would like to set up CCMS for satellite systems with <b>SAP DB</b> (MTE class: CCMS_DB_mcmtc) The very interesting elements from this MTE are: - Used Log Space - Last successful Complete Data Backup - Last Complete Data Backup Return Code T