Any report or Table to see orders with BP partner functions in SAP CRM?

Hello All,
Could anyone help me in getting the table or any report for orders with BP partner functions in SAP CRM?
Would appreciate replying at the earliest.
Cheers
Sreedhar

Hello Bruno,
Thanks very much.
It is somehow helpful for my need but not completly. This is ok when the orders are less in number.
My requirement is how to check the first name , last name and number for contact persons in a list of CRM orders(simply who is the contact person for a list of orders).Let me know for any additional info.
I would apprecaite if you could help me in getting any other way.
Cheers
Sreedhar
Edited by: sreedharhazari2 on Jun 8, 2010 9:18 AM

Similar Messages

Any report or Table to see the list of orders with errors in SAP CRM?

Hello All,
Can anyone help me in getting a table or report to find the list of orders with errors in SAP CRM?.
Let me know if you need any additional information.Thanks in advance.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 26, 2010 11:59 AM

Hello Chait,
I got the solution by this report CRM_ORDER_CHECK_STATUS.
Anyhow thanks very much for your inputs.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 30, 2010 8:48 AM

Sales Orders with diffrent partner functions

Hi,
I wanted to find all the sales orders for which sold-to-party is diffrent than ship-to party.
can you help me.
Thanks in advance
jack

select vbeln posnr parvw kunnr
      from vbpa into it_vbpa
where vbeln in so_vbeln.
loop at it_vbpa into wa_vbpa where parvw = 'AG'.
     read table it_vbpa into wa_buff with key vbeln = wa_vbpa-vbeln
                                                              posnr = wa_vbpa-posnr
                                                              parvw = 'WE'.
if sy-subrc eq 0.
if wa_vbpa-kunnr = wa_buff-kunnr.
delete it_vbpa index sy-tabix.
clear: wa_buff, wa_vbpa.
endif.
endif.
endloop.
"<<finally it_vbpa will contain all such entries which Sold to is not equal to ship to..
Edited by: Jay Sadaram on Jul 7, 2008 12:02 PM

Any Partner function in SAP CRM that determinate the Superior (chief position) of Estructure Organizative?

Hi Guru's
Any know if there any Partner Function of SPRO in CRM that simulate the standar rule 00000157 of PFAC ?
I need aplicate this Partner Function in my Policies rules, but I don't know how to do it.
Thank you very much advance,
Carlos Castillo.

Hi, use FM RH_ACT_LEADING_POSITION.
Regards

Is there any report where we can see more then one position assigned to emp

Hi
Is there any report where we can see more then one position assigned to employee.
Basically requirement is that some of employees got assigned two positions by mistake, so I want to know the standard report to find out such employees.
Thanks & Regards
Rajesh

Hi,
Use RHSTRU00 report with object type P and evaluation path P_S_S_C.
Regards,
Dilek

VL10E report should show only sales order with complete stock

Hello Friends,
I have to make-to-order scenario. While creating a sales order the system proposes a delivery date based on the inhouse production day maintained in the material master.
In VL10E the system gives list of Sales Order for which delivery is due on that particular date. It does not check whether actually the material is really available on that date for the concerned sales order.
Is there any scope ( any config change or user_exit) which will show only the sales order with complete stock confirmed through production order in the VL10E report.
Regards
Debesh

Hi,
Check userexit LV50R_VIEWG02. If CF_SUBRC = 1 you will not see it in the list. For this purpose in the interfase you have the information in IS_VBEP. Set a break-point and check the conditions.
For more info check the Note 198137 - VL10: Customer-specific enhancements / user exits
I hope this helps you
Regards
Eduardo

SD report for the open sales orders with items

Hi,
Is there any standard SAP report which display open sales order togeather with the open items. I want to have columns target quantity, delivered quantity and open quantity.
Any tip?
BR
Saso

Dear Saso,
I think, instead using Report: VA05/ VA05N; its better to use Report: VL10C
In this report, you will get all the Sales Orders along with Materials - relevant for open delivery, along with Open Qty. and various other options can be selected from "Change Layout - (Ctrlt+F8)".
Best Regards,
Amit
Note: Don't maintain any Field-Entry (while executing the Report: VL10N; in order to list all Sales Orders. But, if you want to list Sales Orders based upon some criterias, maintain the Field-entries, as reqd.

Is there any report which I can see the clearing items seperately

Dear Experts,
Is there any standard report which I can see manual clearing postings with chargoff amount.
Normally this is posting with document type-AB. There are other documents with AB as reversal documents,
settlements and other expenses. So we cannot differentiate by document type.
Is there any other way to develop this report?
Regards
Shanu

Dear Shanu,
Goto to Layout there is field called Doc Status.
In the status if it is A - Clearing Document and B means Reset Clearing Document.
Sorry i was wrong it will not give you the required format.
We have to look some other way
Edited by: lolu jo on Apr 12, 2011 11:12 PM

Table for sales order with incoterms

Hi all,
In which table can i get sales orders with incoterms details.
In VBAK and VBAP it is not available
Regards'
Mano

> In which table can i get sales orders with incoterms details.
>
> In VBAK and VBAP it is not available
Hi,
Go to SE16, and type the table name as VBKD. This is the table where all the inco term details are given.
In the new screen, against VBELN, give the sales document numbers for which you want the inco term details and then click on execute.
You will get the info you require.
Hope you find it useful.
Regards,
Swapna

Sales order list by Partner Function "Customer Contact"

Hi, I can see I can get a list of sales orders out of SAP based on Customer, but I want to obtain the same list for the Partner Function "Customer Contact". Any idea how to do this?
Regards

Hi,
You can get a list of sales order by any type of partner, by making the configuration / customizing changes.
This since you can select the partner function to use in transaction VA05.
In SPRO there is a function for reports (sorry if I'm wrong on that), where you need to maintain the index per function (either inquiry, sales order, delivery or billing document) and the partner function (sold-to, ship-to, etc).
Once the customizing change has been made you might have to execute a report to update the appropriate indexes. I believe the help function in the customizing transaction tells you which report to execute (RVV50 IB or something in that nature).
Regards,
Jan Pel

Multiple Partners with Same partner Functions in LEAD

HI Experts,
we have maintained in partner determination procedure -> partner functions in procdure -Channel Partner-> Maximum as 1 . it means that system willl allow only one channel partner to be determined or only one channel partner will be allowed in a txn.
However when we create a Lead, system is allowing to add multiple channel partners under Parties involved AB with error message which is fine, but it allows the user to SAVE it which we dont wont .
any thoughts.
thanks
Smita

Dear Raju,
You may have different Bill-to-Parties and Payers, in a single Sales Order, at Item level (for different Line-Items);
BUT
You may not have multiple Bill-to-Parties and Payers, for a single line-item, for a Particular Sales Order Line-Item.
Best Regards,
Amit,
Note: Haven't experienced, but might be achieved the requirement with Customization (not sure).

Sales Order line item Partner Function issue.

Dear Guru's
I want to assign the (Employee response) partner function ER more than 5 times in Sales Order line partner function tab, but system is not accepting for that.
Please suggest me how to over come this issue with out assigning the u201CERu201D partner function more than 5 times in sales order line item Partner determination procedure.
Regards,
Hari Krishna

sent this to SD module (Sales and Distribution) Forum
this is PS module and we do not deal with this object

Any Report or Trx to see the posted documents with MR11?

I want to see all documents which were posted (compensated) by MR11.
I know there is the MR11SHOW but is not the one I want.
Suppose three months ahead I want to see which documents were done by MR11. How can i get this information?
So, I need a report or a way to see documents done by MR11 between two specific dates for example.
Regards !

There are many reports available with selection of document type as "KP"
1. You can get the report from FBL3N with dynamic selection for document type as "KP"
2. You can get the report from FAGLL03 with dynamic selection for document type as "KP"
3. You can get the report from MR51 with selection for document type as "KP"

Are there any reported conflicts of CS6 (Stand-alone) with other Non-Adobe Software Programs?

I just downloaded a trial version of CS6 (standalone) 64 bit for my Imac 27" 3.06 dual (OS 10.8.1) 4 GB Ram.
I tried it, and then closed down to compare it to anothernon-Adobe program.
As soon as I tried to open a file image in this other program, I could';t open the other program.
I kept getting that bothersome Apple notice where you write a note, send it, and reopnen the software.
This happened over and over,until I decided to uninstall CS6 and reboot my IMac.
The problem with the other Non-Adonbe software disappeared, and that program functioned as beofre.
Has anyone experienced this problem?
I prefer not to mention the other porogram, but that company has been notified as well.
Thanks.

Hi Chris & John,
Thanks for taking the time to reply.
What I'm going to try and do is upload CS6 extended (Photoshop - stand alone) if I can.
The other program is a commerical (paid with a serial number) called Fluid Mask 3.
Is there a possibility that CS6 can create a problem with OS 10.8.1, which then interferes with my other program?
If I can re-load CS6 extended, and I get the same problem, what I'll do is screencapture the "issue" that Apple OS 10.8.1 said I had,
and attach only a portion of the key parts to a reply here.
Stacey Bindman

Print smartforms for service order with printer, not a spool in CRM WebUI

Dear Experts!
We have a long list of different print forms for a service order. We would love to have a list of these forms appearing when clicking on "Print" button to choose from.
We have made appropriate settings in SPRO (CRM -> Basic Functions -> Actions -> Actions in Transaction -> Change Actions and Conditions -> Define Action Profiles and Actions & Define Conditions). Option "Print Immediately" is set, and the Output Device is set to local printer. So now we have the following results:
- When clicking "Print Preview", a window appears where one of the possible forms may be selected to be shown as PDF.
- When clicking "Print", one of the forms is being moved to spool. So, you may only enter the spool in GUI and send the document to printer.
There is only one help topic about printing, that says:
Prerequisites
Actions are displayed on the Print pushbutton if the following criteria are met:
-The print action is set as relevant for the toolbar
- A print smart form is defined as the processing type
- The action is set to Execute immediately
- The action is inactive, that is, it is set to be executed manually
Please, give us a hint on how to make customizing to send document right to the printer.

Hi Alex,
This Business Add-In (PRINTER_DETERM_PPF) is used in the Actions (CRM-BF-ACI) component. It enables you to determine a printer more flexibly than the standard Customizing activity allows you to. For example, if you want to print an e-mail confirmation from a local printer in your office, and not from the usual printer for your entire department, you can use this add-in to do so.
Get back to me for a more info.
Hope this helps.
Cheers, Satish

Any report or Table to see orders with BP partner functions in SAP CRM?

Similar Messages

Maybe you are looking for