Any report to check vacation rule for users?

any report to check vacation rule for users?

Hello Anand,
there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
Regards, Andreas

Similar Messages

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Setup vacation rules for group in workflow.

hi,
somebody please guide me to setup vacation rules for a group.And reassign a user's role to a group when the user is on vacation in Workflow.
thanks
Jamras

Job,
Put your issue with workflow forum or Apps forum http://forums.oracle.com/forums/forum.jspa?forumID=40
--Shiv

Report on settlement profile/rule for the Process Orders ?

Is there any report which will display settlement profile for process order or settlement rule for process order.

Hi,
Did you try this one: KOSRLIST_OR - Settlement Rules?
Regards,
Eli

Report to check freight amount for a month

Dear All,
We have freight condition in the pricing procedure.
We would like to know how much we paid against freight.
Is there any standard report available to find out the same.
Regards,
Mullairaja

Dear Shiva,
This report will be used by end user. They wont be having authorization to use the T code SE16.
They want to calculate freight for a particular month. They also want to have customerwise as well as materialwise freight paid in a month.
Suggest me if any standard report available for the same.
Regards,
Mullairaja

Report to check open reservations for production orders where GI not posted

Hi experts,
Can we get reservation details from any report/ table for production order where material has not been issued, report should also display the value of the reserved material.
I could not find desired details in RESB (it has price but not value) and MB25.
Thanks in advance, useful ansers will be rewarded.
Thnx
Anand

Hello Anand,
there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
Regards, Andreas

Interactive Report actions don't work for users (i.e. for non-developers)

I've Interactive Reports that work fine in development. But when I or other users run it in non-development mode, no feature or actions (sorting, filtering, select columns, aggregate, etc.) work. At run time (going directly to the URL ...apex/f?p=APP_ID), the actions menu is enabled for users and it allows them to go through the process of filtering (select column, pick opeartor, pick value) and click-apply, but nothing happens after that! The interactive report comes back with the data as it was before the filtering was applied. Same thing happens with other action-menu features (no affect).
Please help since I've a demo tomorrow to show these features. Thanks.

Why would you post this same issue twice? Did you think it would help get an answer faster?
I see the second post here: Re: Actions Menu in Interactive Reports does not sort, filter, select cols etc

Vacation Rules for PO Approval

Hi,
We are using Position Hierarchy where an employee1 with limits over 1 million(USD) goes on vacation and he is delegating his authority to another employee2 who has limit of 50,000USD.
Now, if the PO is raised above 50,000 USD it would go to employee1 but he has Delegated his Response to employee2. Also the employee2 is not a part of that Approval Path. In this case, the PO goes to employee2 for Approval and is returned to the Buyer as No Approver Found.
This is because the employee2 is not a Part of that Hierarchy.
But even if we add him into the Hierarchy, the PO ciruclates within employee1 & employee2.
Is there anyway in Oracle where the employee Who is Delegating his response to another employee and the delegated employee should also be given the same position & Approval limits of the earlier one?
Thanks
Dinesh

You need to setup appropriate hierarchy for the employee2 and run the "Fill Employee Hiererchy" program.
There is no automated way to update the position and approval limits based on vacation rule setup.

Any report to see what are the users assigned to an org-unit ?

Hi All,
Is there any standard report available to see what are the users assigned to a particular org-unit?
I'm looking for complete list of users assigned to a particular org-unit both directly and indirectly/
Thank you so much in advance !!
Cheers,
Gyan.

Hi,
None of them actually helped.
Trx PC00 is not available in 4.0 sytem. And from the table mentioned i don't see the org-unit value. Could you please elaborate on this.
Thanks,
Gyan.

Are there any recommended group policies to consider for users consuming SharePoint?

Hi - we are close to going live with a new SharePoint 2013 farm and the question of GPOs has come up. Havn't seen any best practice or recommendations about this so was wondering if anyone in the community has any views?
Cheers
J

The major group policy settings that you should engage with your NOS managers involve security settings: service account security settings, network storage security settings and local security settings. if you do not build your knowledge of these interactions,
you may encounter highly arcane and deeply perplexing performance issues and even failures that appear to have no immediate cause that you can quickly point to and resolve.
Service Account Security Settings
All service accounts used in your farm should be domain service accounts.
Some of these accounts must have read permission to read the properties of all other service accounts. Such accounts include: farm service account, user profile service account, SQL server agent account (the account you assign to run your SQL server),
and the workflow manager 1.0 service account.
For example, if you will be creating SQL Server backup maintenance plans, you must give the the SQL Server service account the permission to read the domain account that you logged in as to create these maintenance plans. I discuss this more
here.
Network Storage Security Settings
The search service account needs RW permission to the network folder you use to store farm backups (the backups created either through CA or via PowerShell). If it does not have this, a backup performed through CA or via PowerShell will succeed in
everything except the Search portion. This was not the case for 2010. Why the search service account now needs to touch a backup folder is completely beyond me. But there you have it. I discuss this more
here.
Local Security Policy
The Search Service accounts must have these local security policy user rights assignments or your search service performance will deteriorate markedly: Adjust memory quotas for a process, Impersonate a client after authentication and Replace a process
level token.
Likewise, be sure to assign these user rights assignments to the farm service account: Allow log on locally, Adjust memory quotas for a process, Impersonate a client after authentication, Log on as a batch job, Log on as a service and Replace a
process level token.
More of these assignments are discussed
here.
Your GPO is likely pushed out on a regular basis (eg, every half hour), so, it may overwrite any settings changes implemented by an installer or configuration wizard. Not configuring these settings correctly can lead to highly arcane and perplexing
problems, manifested in error messages that do not provide real troubleshooting assistance. The problem is that Microsoft has not documented these various security settings needed by SharePoint service accounts and processes down to the level discussed
here and as noted above. This is also one of the reasons I believe why Microsoft strongly recommends that you perform all installation and subsequent configuration using the SharePoint Setup User Administrator account (eg, spAdmin): this account
is used to configure a wide variety of registry entries and folders and is granted the permission to edit these as necessary. Your administrator account may not be.
Another area for GPO attention involves firewalls. For example, you need to make sure that the Windows Firewall on your SQL Server instance(s) has appropriate rules configured to allow inbound and outbound traffic.
References
Plan for administrative and service accounts in SharePoint 2013
Account permissions and security settings in SharePoint 2013
SharePoint 2013: Service Account Configurations and Permissions
SQL Server 2012: SQLServer Error: 15404 Could not obtain information about Windows NT group/user
SharePoint 2013: FatalError: Object Search Service failed in event OnBackup
SharePoint 2013: cannot connect to database at SQL server at... The database might not exist...

Check working day for user according to factory calander

Hi ,
i wan to check" for given user whether date entered is first working day of week for the user or not based on factory calendar of the country of the company of the user".
How can this be done if any of you have any idea?
your help will be highly appriciated.

Hi,
DATA:
   L_SCAL_WEEK LIKE SCAL-WEEK,
   L_DATE_LOW LIKE SY-DATUM,
   L_DATE_HIGH LIKE SY-DATUM.
*--- Find start date for current week
Find current week
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
    DATE         = SY-DATUM
IMPORTING
    WEEK         = L_SCAL_WEEK
EXCEPTIONS
    DATE_INVALID = 1
    OTHERS       = 2.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
Start date current week
CALL FUNCTION 'WEEK_GET_FIRST_DAY'
EXPORTING
    WEEK         = L_SCAL_WEEK
IMPORTING
    DATE         = L_DATE_LOW
EXCEPTIONS
    WEEK_INVALID = 1
    OTHERS       = 2.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
WRITE : / L_DATE_LOW. " first working day of current week

Report to Display All Authorizations for User

Dear Experts,
Is the any standard report or table from which we can get the full authorization details of a user.
EX: User Name -> Role -> T-Codes -> Authorization Objects -> Field Values.
Atleast pointing User Name -> Authorization Objects -> Field Values.
Please Help.
Thanks

Hello Simonjohn,
There is not any direct way to do that, but you can do one thing,
Through table "AGR_1251" you can fetch the authorization object and field value by mentioning the roles assigned to particular user, which you can fetch using table "AGR_USERS".
You can also create quick view by joining these two tables using t-code "SQVI", which will help you to get your result.
Here after joining tables you can also get report name which is created by SQVI automatically in "quickview"--> additional functions --> display report name
Hope it helps.
Regards,
Amit Barnawal
Edited by: Amit Barnawal on Jan 5, 2012 11:20 AM
Edited by: Amit Barnawal on Jan 5, 2012 11:22 AM
Edited by: Amit Barnawal on Jan 5, 2012 11:33 AM

Check text field for user name and password

Guys,
Please help me. I have this simple problem...
I want to check if the text field for username and password has value with no POSTBACK.
I got to check that it is null there will be a text that will appear on the page 'Null not allowed'... Can you guide me here.

Crosspost: http://forum.java.sun.com/thread.jspa?threadID=5227035&tstart=0
Please don't crosspost, your query has been replied to in the thread linked to above; continue there.

Reports successfully execute but generate a login failed for user 'sa' err

I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?

What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.

Any report to check vacation rule for users?

Similar Messages

Maybe you are looking for