Any resolution to nVidia GPU overheating/stuttering issues on T410s?

I've been digging around the forums and have seen a lot of old posts with people having similar symptoms: switchable graphics (nVidia part) overheating and causing stuttering problems, crashes, freezes, etc. under heavy load. I talked to tech support a while ago and they seemed to be unaware of the issue.
Anyone know of a solution?
Solved!
Go to Solution.

@kayson,
The engineering team is still investigating this issue.
Also we are currently discussing this issue here.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410S-w-switchable-gt-lots-of-System-freeze...
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Similar Messages

  • T61 nvidia gpu

    Anyone got a more permanent fix for the t61 nvidia gpu overheating, getting really fed up of putting a blowtorch to it, done it like 10 times now. Any help would be very appreciated

    There is no really cheap way out of this problem. You'll probably find plenty of people selling boards pulled from scrap laptops or failed boards that have been reflowed or baked (like yours), but the only way to fix it properly is with a board from an august 2008 model, or one with Intel graphics. If you're interested in one you can send me the model, serial, date code and cpu model number if you know it (in a private message) and I'll see what's available. 
    In my opinion if you like the laptop, it's worth fixing and you might as well fix it right. Overheating your chip, or even infrared reflowing of the chip won't fix it, it only causes temporary contact across the fractured circuits. I'd never recommend this for anything other than diagnostic purposes.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue.

    I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue. When I go to the settlement site http://www.nvidiasettlement.com , I see that the last date of filing the claim expired which was 14th of March 2011. Is there any option remaining for the solution.
    I want to get rid of this irritating overheating problem. Is there any option for replacement of NVIDIA GPU at my own cost even in some authorised service centre?
    Regards,
    Sujeet
    [email protected]
    +919266580154

    Thank you for confirming, that this can in some cases solve the overheating.
    And i agree with you,  that it is not straight forward, and people has to be carefull

  • I am having issues with my iphone6 bluetooth connection in my car.  When going to settings under bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution yet?

    I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class.  When going to settings under Bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution from Apple yet?

    Hi susan from WSL, 
    Welcome to the Apple Support Communities!
    I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article. 
    If you can’t use a Bluetooth accessory or car kit
    Cheers, 
    Joe

  • Cloud quarantine issues....any resolution?

    Like other users n the forum, I am geting files quarantined on upload to the cloud, predominantly those related to email backups.
    How do these get unquarantined and added to the backup?  These issues have been reported for over a year now but can't see that there's been any resolution?

    Hi AlbiDan,
    Did you try the solutions mentioned in this doc?
    http://helpx.adobe.com/dreamweaver/kb/troubleshoot-crash-dreamweaver-cc.html
    Thanks,
    Preran

  • While making or disconnecting the calls, signals disappear and phone become unreachable, has anyone faced this issue or any resolution to it ?

    While making or disconnecting the calls, signals disappear and phone become unreachable, has anyone faced this issue or any resolution to it ?

    Boot on safe mode and check again 
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • [Solved] 1366x768 Resolution with nVidia drivers

    I am trying to set up my monitor at full resolution (1366x768) and I am having issues getting it to display correctly. Out of the box, I was able to get 1024x768, but when I tried to manually set the full resolution using xrandr, it will only go up to 1280x768 with a black bar on the right. Below are the relevant files;
    xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 325.15 (buildmeister@swio-display-x64-rhel04-07) Wed Jul 31 19:31:53 PDT 2013
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: builtin, VertRefresh source: builtin
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "CRT-1"
    HorizSync 28.0 - 55.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "nvidia-auto-select +0+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Xorg.log.0
    [ 10.475]
    X.Org X Server 1.14.3
    Release Date: 2013-09-12
    [ 10.475] X Protocol Version 11, Revision 0
    [ 10.475] Build Operating System: Linux 3.11.1-1-ARCH i686
    [ 10.475] Current Operating System: Linux steinbeck 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:40:32 CEST 2013 i686
    [ 10.475] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=646d074d-3ed6-4e3c-982e-43395ef95493 rw quiet
    [ 10.475] Build Date: 08 October 2013 08:51:37PM
    [ 10.475]
    [ 10.475] Current version of pixman: 0.30.2
    [ 10.475] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 10.475] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 10.475] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 9 19:41:27 2013
    [ 10.534] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 10.574] (==) No Layout section. Using the first Screen section.
    [ 10.574] (==) No screen section available. Using defaults.
    [ 10.574] (**) |-->Screen "Default Screen Section" (0)
    [ 10.574] (**) | |-->Monitor "<default monitor>"
    [ 10.594] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 10.594] (==) Automatically adding devices
    [ 10.594] (==) Automatically enabling devices
    [ 10.594] (==) Automatically adding GPU devices
    [ 10.656] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 10.656] Entry deleted from font path.
    [ 10.656] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 10.656] Entry deleted from font path.
    [ 10.672] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 10.672] Entry deleted from font path.
    [ 10.672] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 10.675] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 10.675] Entry deleted from font path.
    [ 10.675] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 10.675] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 10.675] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 10.675] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 10.676] (II) Loader magic: 0x8259620
    [ 10.676] (II) Module ABI versions:
    [ 10.676] X.Org ANSI C Emulation: 0.4
    [ 10.676] X.Org Video Driver: 14.1
    [ 10.676] X.Org XInput driver : 19.1
    [ 10.676] X.Org Server Extension : 7.0
    [ 10.676] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 10.678] (--) PCI:*(0:1:0:0) 10de:0622:3842:c866 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 10.678] Initializing built-in extension Generic Event Extension
    [ 10.678] Initializing built-in extension SHAPE
    [ 10.678] Initializing built-in extension MIT-SHM
    [ 10.678] Initializing built-in extension XInputExtension
    [ 10.678] Initializing built-in extension XTEST
    [ 10.678] Initializing built-in extension BIG-REQUESTS
    [ 10.678] Initializing built-in extension SYNC
    [ 10.678] Initializing built-in extension XKEYBOARD
    [ 10.678] Initializing built-in extension XC-MISC
    [ 10.678] Initializing built-in extension SECURITY
    [ 10.678] Initializing built-in extension XINERAMA
    [ 10.678] Initializing built-in extension XFIXES
    [ 10.678] Initializing built-in extension RENDER
    [ 10.678] Initializing built-in extension RANDR
    [ 10.678] Initializing built-in extension COMPOSITE
    [ 10.678] Initializing built-in extension DAMAGE
    [ 10.678] Initializing built-in extension MIT-SCREEN-SAVER
    [ 10.678] Initializing built-in extension DOUBLE-BUFFER
    [ 10.678] Initializing built-in extension RECORD
    [ 10.678] Initializing built-in extension DPMS
    [ 10.678] Initializing built-in extension X-Resource
    [ 10.678] Initializing built-in extension XVideo
    [ 10.678] Initializing built-in extension XVideo-MotionCompensation
    [ 10.678] Initializing built-in extension XFree86-VidModeExtension
    [ 10.678] Initializing built-in extension XFree86-DGA
    [ 10.678] Initializing built-in extension XFree86-DRI
    [ 10.678] Initializing built-in extension DRI2
    [ 10.678] (II) LoadModule: "glx"
    [ 10.722] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.897] (II) Module glx: vendor="NVIDIA Corporation"
    [ 11.897] compiled for 4.0.2, module version = 1.0.0
    [ 11.897] Module class: X.Org Server Extension
    [ 11.897] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:38:58 PDT 2013
    [ 11.897] Loading extension GLX
    [ 11.897] (==) Matched nouveau as autoconfigured driver 0
    [ 11.897] (==) Matched nvidia as autoconfigured driver 1
    [ 11.897] (==) Matched nv as autoconfigured driver 2
    [ 11.897] (==) Matched nouveau as autoconfigured driver 3
    [ 11.897] (==) Matched nvidia as autoconfigured driver 4
    [ 11.897] (==) Matched nv as autoconfigured driver 5
    [ 11.897] (==) Matched vesa as autoconfigured driver 6
    [ 11.897] (==) Matched modesetting as autoconfigured driver 7
    [ 11.897] (==) Matched fbdev as autoconfigured driver 8
    [ 11.897] (==) Assigned the driver to the xf86ConfigLayout
    [ 11.897] (II) LoadModule: "nouveau"
    [ 11.904] (WW) Warning, couldn't open module nouveau
    [ 11.904] (II) UnloadModule: "nouveau"
    [ 11.904] (II) Unloading nouveau
    [ 11.904] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 11.904] (II) LoadModule: "nvidia"
    [ 11.904] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 11.953] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 11.953] compiled for 4.0.2, module version = 1.0.0
    [ 11.953] Module class: X.Org Video Driver
    [ 11.954] (II) LoadModule: "nv"
    [ 11.954] (WW) Warning, couldn't open module nv
    [ 11.954] (II) UnloadModule: "nv"
    [ 11.954] (II) Unloading nv
    [ 11.954] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 11.954] (II) LoadModule: "vesa"
    [ 11.955] (WW) Warning, couldn't open module vesa
    [ 11.955] (II) UnloadModule: "vesa"
    [ 11.955] (II) Unloading vesa
    [ 11.955] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 11.955] (II) LoadModule: "modesetting"
    [ 11.955] (WW) Warning, couldn't open module modesetting
    [ 11.955] (II) UnloadModule: "modesetting"
    [ 11.955] (II) Unloading modesetting
    [ 11.955] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 11.955] (II) LoadModule: "fbdev"
    [ 11.955] (WW) Warning, couldn't open module fbdev
    [ 11.955] (II) UnloadModule: "fbdev"
    [ 11.955] (II) Unloading fbdev
    [ 11.955] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 11.957] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 18:17:17 PDT 2013
    [ 11.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 11.957] (++) using VT number 1
    [ 11.961] (II) Loading sub module "fb"
    [ 11.961] (II) LoadModule: "fb"
    [ 11.961] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 11.973] (II) Module fb: vendor="X.Org Foundation"
    [ 11.973] compiled for 1.14.3, module version = 1.0.0
    [ 11.973] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.973] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 11.973] (II) Loading sub module "wfb"
    [ 11.973] (II) LoadModule: "wfb"
    [ 11.973] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 11.976] (II) Module wfb: vendor="X.Org Foundation"
    [ 11.976] compiled for 1.14.3, module version = 1.0.0
    [ 11.976] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.976] (II) Loading sub module "shadow"
    [ 11.976] (II) LoadModule: "shadow"
    [ 11.976] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 11.977] (II) Module shadow: vendor="X.Org Foundation"
    [ 11.977] compiled for 1.14.3, module version = 1.1.0
    [ 11.977] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.977] (II) Loading sub module "ramdac"
    [ 11.977] (II) LoadModule: "ramdac"
    [ 11.977] (II) Module "ramdac" already built-in
    [ 11.985] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 11.985] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 11.985] (==) NVIDIA(0): RGB weight 888
    [ 11.985] (==) NVIDIA(0): Default visual is TrueColor
    [ 11.985] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 11.989] (**) NVIDIA(0): Enabling 2D acceleration
    [ 12.996] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 13.056] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 13.057] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
    [ 13.057] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 13.057] (--) NVIDIA(0): VideoBIOS: 62.94.61.00.60
    [ 13.057] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 13.059] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
    [ 13.059] (--) NVIDIA(0): CRT-0
    [ 13.059] (--) NVIDIA(0): CRT-1 (boot, connected)
    [ 13.059] (--) NVIDIA(0): TV-0
    [ 13.059] (--) NVIDIA(0): DFP-0
    [ 13.059] (--) NVIDIA(0): DFP-1
    [ 13.059] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
    [ 13.059] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
    [ 13.059] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 13.059] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 13.059] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 13.059] (**) NVIDIA(0): all display devices.)
    [ 13.062] (==) NVIDIA(0):
    [ 13.062] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 13.062] (==) NVIDIA(0): will be used as the requested mode.
    [ 13.062] (==) NVIDIA(0):
    [ 13.062] (II) NVIDIA(0): Validated MetaModes:
    [ 13.062] (II) NVIDIA(0): "CRT-1:nvidia-auto-select{}"
    [ 13.062] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 13.090] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
    [ 13.090] (WW) NVIDIA(0): from CRT-1's EDID.
    [ 13.090] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 13.090] (--) Depth 24 pixmap format is 32 bpp
    [ 13.090] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 13.093] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 13.093] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 13.093] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 13.093] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 13.093] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 13.093] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 13.093] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 13.093] (II) NVIDIA(0): Config Options in the README.
    [ 13.096] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select{}"
    [ 13.155] Loading extension NV-GLX
    [ 13.189] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 13.189] (==) NVIDIA(0): Backing store disabled
    [ 13.189] (==) NVIDIA(0): Silken mouse enabled
    [ 13.190] (==) NVIDIA(0): DPMS enabled
    [ 13.191] Loading extension NV-CONTROL
    [ 13.191] Loading extension XINERAMA
    [ 13.191] (II) Loading sub module "dri2"
    [ 13.191] (II) LoadModule: "dri2"
    [ 13.191] (II) Module "dri2" already built-in
    [ 13.191] (II) NVIDIA(0): [DRI2] Setup complete
    [ 13.191] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 13.191] (--) RandR disabled
    [ 13.209] (II) Initializing extension GLX
    [ 13.417] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 13.417] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.417] (II) LoadModule: "evdev"
    [ 13.417] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 13.433] (II) Module evdev: vendor="X.Org Foundation"
    [ 13.433] compiled for 1.14.3, module version = 2.8.2
    [ 13.433] Module class: X.Org XInput Driver
    [ 13.433] ABI class: X.Org XInput driver, version 19.1
    [ 13.433] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.433] (**) Power Button: always reports core events
    [ 13.433] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 13.433] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.433] (--) evdev: Power Button: Found keys
    [ 13.433] (II) evdev: Power Button: Configuring as keyboard
    [ 13.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
    [ 13.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 13.433] (**) Option "xkb_rules" "evdev"
    [ 13.434] (**) Option "xkb_model" "pc104"
    [ 13.434] (**) Option "xkb_layout" "us"
    [ 13.462] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 13.462] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.462] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.462] (**) Power Button: always reports core events
    [ 13.462] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 13.462] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.462] (--) evdev: Power Button: Found keys
    [ 13.462] (II) evdev: Power Button: Configuring as keyboard
    [ 13.462] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 13.462] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 13.462] (**) Option "xkb_rules" "evdev"
    [ 13.462] (**) Option "xkb_model" "pc104"
    [ 13.462] (**) Option "xkb_layout" "us"
    [ 13.462] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 13.463] (II) config/udev: Adding input device Chicony Saitek Eclipse Keyboard (/dev/input/event0)
    [ 13.463] (**) Chicony Saitek Eclipse Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.463] (II) Using input driver 'evdev' for 'Chicony Saitek Eclipse Keyboard'
    [ 13.463] (**) Chicony Saitek Eclipse Keyboard: always reports core events
    [ 13.463] (**) evdev: Chicony Saitek Eclipse Keyboard: Device: "/dev/input/event0"
    [ 13.463] (--) evdev: Chicony Saitek Eclipse Keyboard: Vendor 0x6a3 Product 0x8020
    [ 13.463] (--) evdev: Chicony Saitek Eclipse Keyboard: Found keys
    [ 13.463] (II) evdev: Chicony Saitek Eclipse Keyboard: Configuring as keyboard
    [ 13.463] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input0/event0"
    [ 13.463] (II) XINPUT: Adding extended input device "Chicony Saitek Eclipse Keyboard" (type: KEYBOARD, id 8)
    [ 13.463] (**) Option "xkb_rules" "evdev"
    [ 13.463] (**) Option "xkb_model" "pc104"
    [ 13.463] (**) Option "xkb_layout" "us"
    [ 13.464] (II) config/udev: Adding input device Chicony Saitek Eclipse Keyboard (/dev/input/event1)
    [ 13.464] (**) Chicony Saitek Eclipse Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.464] (II) Using input driver 'evdev' for 'Chicony Saitek Eclipse Keyboard'
    [ 13.464] (**) Chicony Saitek Eclipse Keyboard: always reports core events
    [ 13.464] (**) evdev: Chicony Saitek Eclipse Keyboard: Device: "/dev/input/event1"
    [ 13.464] (--) evdev: Chicony Saitek Eclipse Keyboard: Vendor 0x6a3 Product 0x8020
    [ 13.464] (--) evdev: Chicony Saitek Eclipse Keyboard: Found keys
    [ 13.464] (II) evdev: Chicony Saitek Eclipse Keyboard: Configuring as keyboard
    [ 13.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.1/input/input1/event1"
    [ 13.464] (II) XINPUT: Adding extended input device "Chicony Saitek Eclipse Keyboard" (type: KEYBOARD, id 9)
    [ 13.464] (**) Option "xkb_rules" "evdev"
    [ 13.464] (**) Option "xkb_model" "pc104"
    [ 13.464] (**) Option "xkb_layout" "us"
    [ 13.464] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 13.464] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 13.464] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 13.464] (**) Logitech USB Receiver: always reports core events
    [ 13.464] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 13.464] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 13.464] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 13.464] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 13.464] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 13.464] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 13.464] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 13.464] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 13.464] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 13.464] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2/event2"
    [ 13.465] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 13.465] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 13.465] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 13.465] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 13.465] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 13.465] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 13.465] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 13.465] (II) No input driver specified, ignoring this device.
    [ 13.465] (II) This device may have been added with another device file.
    [ 13.465] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
    [ 13.465] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 13.465] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 13.465] (**) Logitech USB Receiver: always reports core events
    [ 13.465] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
    [ 13.465] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 13.466] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 13.466] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 13.466] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 13.466] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 13.466] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 13.466] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 13.466] (--) evdev: Logitech USB Receiver: Found keys
    [ 13.466] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 13.466] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 13.466] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 13.466] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 13.466] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.466] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/input/input3/event3"
    [ 13.466] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 13.466] (**) Option "xkb_rules" "evdev"
    [ 13.466] (**) Option "xkb_model" "pc104"
    [ 13.466] (**) Option "xkb_layout" "us"
    [ 13.466] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 13.466] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 13.466] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 13.466] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 13.466] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 13.466] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 13.466] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 13.466] (II) No input driver specified, ignoring this device.
    [ 13.466] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.467] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13)
    [ 13.467] (II) No input driver specified, ignoring this device.
    [ 13.467] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14)
    [ 13.468] (II) No input driver specified, ignoring this device.
    [ 13.468] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
    [ 13.468] (II) No input driver specified, ignoring this device.
    [ 13.468] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8)
    [ 13.468] (II) No input driver specified, ignoring this device.
    [ 13.468] (II) This device may have been added with another device file.
    [ 13.468] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
    [ 13.469] (II) No input driver specified, ignoring this device.
    [ 13.469] (II) This device may have been added with another device file.
    [ 13.469] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
    [ 13.469] (II) No input driver specified, ignoring this device.
    [ 13.469] (II) This device may have been added with another device file.
    [ 18.412] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 18.412] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 18.412] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 18.412] (**) NVIDIA(0): all display devices.)
    [ 23.193] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 23.193] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 23.193] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 23.193] (**) NVIDIA(0): all display devices.)
    [ 266.255] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 266.255] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 266.255] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 266.255] (**) NVIDIA(0): all display devices.)
    [ 266.971] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 266.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 266.971] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 266.971] (**) NVIDIA(0): all display devices.)
    [ 268.486] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 268.486] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 268.487] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 268.487] (**) NVIDIA(0): all display devices.)
    [ 289.743] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 289.743] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 289.743] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 289.743] (**) NVIDIA(0): all display devices.)
    [ 879.365] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 879.365] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 879.365] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 879.365] (**) NVIDIA(0): all display devices.)
    [ 74720.901] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74720.901] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74720.901] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74720.901] (**) NVIDIA(0): all display devices.)
    [ 74734.644] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74734.644] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74734.644] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74734.644] (**) NVIDIA(0): all display devices.)
    [ 74741.124] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74741.124] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74741.124] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74741.124] (**) NVIDIA(0): all display devices.)
    [ 74741.272] (II) NVIDIA(0): Setting mode "DVI-I-1: 1368x768_60.00 @1368x768 +0+0 {ViewPortIn=1368x768, ViewPortOut=1368x768+0+0}"
    [ 74741.409] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 74741.409] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 74741.409] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
    [ 74741.409] (**) NVIDIA(0): all display devices.)
    Any suggestions?
    Last edited by fuzzyonethree (2013-10-13 23:14:48)

    Drop that xorg.conf completely, it doesn't contain any relevant settings. The problem is that the driver can't get the display's EDID:
    [ 13.090] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID
    Try a different cable. Or, if you can, use a digital connection (DVI, HDMI) instead of VGA.

  • GE620 CS:GO Unplayable at any resolution.

    I have already set the application to run with the nVidia GPU and it shows in the GPU activity status bar widget.
    The application does not run well even at half of its native resolution @(1280x720) instead of (1920x1080)
    In comparison another old acer running intel centrino with 8600M GT runs better.
    I also saw a lenovo running the same GT540M card which performed well even at 1080p
    There must certainly be a problem with either the computer or the GPU itself
    These are the specifications,
    Processor   Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 2001 Mhz, 4 Core(s), 8 Logical Processor(s)
    BIOS Version/Date   American Megatrends Inc. E16G5IMS V1.0P, 23/12/2011
    SMBIOS Version   2.7
    Installed Physical Memory (RAM)   8.00 GB
    nVIDIA System Information report created on: 09/21/2012 17:42:44
    [Display]
    Operating System:   Windows 8 Enterprise, 64-bit
    DirectX version:   11.0
    GPU processor:      GeForce GT 540M
    Driver version:      306.23
    DirectX support:   11.1
    CUDA Cores:      96
    Core clock:      672 MHz
    Shader clock:      1344 MHz
    Memory data rate:   1800 MHz
    Memory interface:   128-bit
    Total available graphics memory:   4096 MB
    Dedicated video memory:   1024 MB DDR3
    System video memory:   0 MB
    Shared system memory:   3072 MB
    Video BIOS version:   70.08.55.00.07
    IRQ:         16
    Bus:         PCI Express x16 Gen2
    [Components]
    easyDaemonAPIU64.DLL      1.10.8.0      NVIDIA Update Components
    WLMerger.exe      1.10.8.0      NVIDIA Update Components
    daemonu.exe      1.10.8.0      NVIDIA Update Components
    ComUpdatus.exe      1.10.8.0      NVIDIA Update Components
    NvUpdtr.dll      1.10.8.0      NVIDIA Update Components
    NvUpdt.dll      1.10.8.0      NVIDIA Update Components
    nvui.dll      8.17.13.0623      NVIDIA User Experience Driver Component
    nvxdsync.exe      8.17.13.0623      NVIDIA User Experience Driver Component
    nvxdplcy.dll      8.17.13.0623      NVIDIA User Experience Driver Component
    nvxdbat.dll      8.17.13.0623      NVIDIA User Experience Driver Component
    nvxdapix.dll      8.17.13.0623      NVIDIA User Experience Driver Component
    NVCPL.DLL      8.17.13.0623      NVIDIA User Experience Driver Component
    nvCplUIR.dll      4.8.720.0      NVIDIA Control Panel
    nvCplUI.exe      4.8.720.0      NVIDIA Control Panel
    nvWSSR.dll      6.14.13.0623      NVIDIA Workstation Server
    nvWSS.dll      6.14.13.0623      NVIDIA Workstation Server
    nvViTvSR.dll      6.14.13.0623      NVIDIA Video Server
    nvViTvS.dll      6.14.13.0623      NVIDIA Video Server
    nvDispSR.dll      6.14.13.0623      NVIDIA Display Server
    NVMCTRAY.DLL      8.17.13.0623      NVIDIA Media Center Library
    nvDispS.dll      6.14.13.0623      NVIDIA Display Server
    PhysX      09.12.0613      NVIDIA PhysX
    NVCUDA.DLL      8.17.13.0623      NVIDIA CUDA 5.0.1 driver
    nvGameSR.dll      6.14.13.0623      NVIDIA 3D Settings Server
    nvGameS.dll      6.14.13.0623      NVIDIA 3D Settings Server

    Quote from: jonan on 24-September-12, 23:41:31
    Yea its running with the nVidia GPU. No problems with that.
    Do you have the same problem with any other game?

  • Unable to Use Onboard Audio with Nvidia GPU since Linux 3.4

    I am currently stuck using linux 3.3.8-1 along with nvidia 295.49-1, because I don't know how to workaround the kernel disabling MSI for snd-hda-intel. This module is used by both the Nvidia HDMI audio and the ALC880 onboard audio. Previously, I have been able to disable HDMI audio to be able to use the onboard audio, but now I don't know what to do. I have attempted to use "options snd-hda-intel enable_msi=1" when modprobing on boot, which gets rid of the "hda_intel: Disabling MSI" message but it hasn't given me a working onboard audio output.
    I have also used the following command along with enable_msi=1 (found here: http://www.mjmwired.net/kernel/Document … HOWTO.txt) in my rc.local
    echo 1 > /sys/bus/pci/devices/0000\:00\:1b.0/msi_bus
    Of course, it is my assumption that the kernel disabling MSI is the cause of the problem, but it might be something else. Please let me know if any additional logs would be helpful.
    Linux 3.4.4-3, Nvidia 302.17-2  Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-3-ARCH (nobody@rampage) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Tue Jul 3 15:35:13 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb6f000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 37529000 - 377fd6a7
    [ 0.000000] Move RAMDISK from 000000003fb6f000 - 000000003fe436a6 to 37529000 - 377fd6a6
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c061ec40, node_mem_map f6d28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d07000 s31424 r0 d21824 u53248
    [ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025576k/1046864k available (3810k kernel code, 20836k reserved, 1471k data, 524k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0629000 - 0xc06ac000 ( 524 kB)
    [ 0.000000] .data : 0xc04b88f7 - 0xc0628800 (1471 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04b88f7 (3810 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2999.992 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.98 BogoMIPS (lpj=9999973)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.007027] Initializing cgroup subsys cpuacct
    [ 0.007032] Initializing cgroup subsys memory
    [ 0.007043] Initializing cgroup subsys devices
    [ 0.007046] Initializing cgroup subsys freezer
    [ 0.007049] Initializing cgroup subsys net_cls
    [ 0.007052] Initializing cgroup subsys blkio
    [ 0.007102] CPU: Physical Processor ID: 0
    [ 0.007105] CPU: Processor Core ID: 0
    [ 0.007108] mce: CPU supports 4 MCE banks
    [ 0.007122] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007127] using mwait in idle threads.
    [ 0.010796] ACPI: Core revision 20120320
    [ 0.013347] ftrace: allocating 16930 entries in 34 pages
    [ 0.023410] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058322] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.059996] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 18
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 0000007fffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000003ffff
    [ 0.076747] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.096685] CPU 1 irqstacks, hard=f64ae000 soft=f64b0000
    [ 0.096689] Booting Node 0, Processors #1 Ok.
    [ 0.009999] Initializing CPU#1
    [ 0.109847] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.109913] Brought up 2 CPUs
    [ 0.109918] Total of 2 processors activated (12004.96 BogoMIPS).
    [ 0.110087] devtmpfs: initialized
    [ 0.110253] PM: Registering ACPI NVS region [mem 0x3fe54000-0x3fee7fff] (606208 bytes)
    [ 0.111622] NET: Registered protocol family 16
    [ 0.111622] ACPI: bus type pci registered
    [ 0.111622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.111622] PCI: not using MMCONFIG
    [ 0.112603] PCI: Using configuration type 1 for base access
    [ 0.116699] bio: create slab <bio-0> at 0
    [ 0.116741] ACPI: Added _OSI(Module Device)
    [ 0.116741] ACPI: Added _OSI(Processor Device)
    [ 0.116741] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.116741] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117482] ACPI: EC: Look up EC in DSDT
    [ 0.119433] ACPI: Interpreter enabled
    [ 0.119446] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.119477] ACPI: Using IOAPIC for interrupt routing
    [ 0.119501] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.119654] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.119657] PCI: Using MMCONFIG for extended config space
    [ 0.121061] ACPI: No dock devices found.
    [ 0.121073] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.122518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.125297] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.125302] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.125306] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.125310] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.125314] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.125317] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.125321] PCI: root bus 00: using default resources
    [ 0.125377] PCI host bridge to bus 0000:00
    [ 0.125382] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.125385] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.125400] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
    [ 0.125463] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
    [ 0.125521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.125577] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.125597] pci 0000:00:1b.0: reg 10: [mem 0x53300000-0x53303fff 64bit]
    [ 0.125676] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.125704] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.125786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.125815] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
    [ 0.125898] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.125928] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.126011] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.126040] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
    [ 0.126123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.126154] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.126201] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
    [ 0.126239] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.126285] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
    [ 0.126322] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.126368] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
    [ 0.126405] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.126451] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
    [ 0.126498] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.126521] pci 0000:00:1d.7: reg 10: [mem 0x53304000-0x533043ff]
    [ 0.126613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.126638] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.126718] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
    [ 0.126810] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [ 0.126823] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
    [ 0.126850] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.126867] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
    [ 0.126878] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
    [ 0.126889] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
    [ 0.126901] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
    [ 0.126912] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
    [ 0.126954] pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
    [ 0.126971] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
    [ 0.126981] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
    [ 0.126991] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
    [ 0.127002] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
    [ 0.127012] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
    [ 0.127053] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.127072] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.127129] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
    [ 0.127217] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
    [ 0.127232] pci 0000:01:00.0: reg 10: [mem 0x52000000-0x52ffffff]
    [ 0.127247] pci 0000:01:00.0: reg 14: [mem 0x40000000-0x4fffffff 64bit pref]
    [ 0.127261] pci 0000:01:00.0: reg 1c: [mem 0x50000000-0x51ffffff 64bit pref]
    [ 0.127271] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
    [ 0.127281] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.127352] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
    [ 0.127367] pci 0000:01:00.1: reg 10: [mem 0x53000000-0x53003fff]
    [ 0.136679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.136685] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.136689] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.136695] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.136765] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
    [ 0.136788] pci 0000:02:00.0: reg 10: [io 0x2028-0x202f]
    [ 0.136804] pci 0000:02:00.0: reg 14: [io 0x2034-0x2037]
    [ 0.136819] pci 0000:02:00.0: reg 18: [io 0x2020-0x2027]
    [ 0.136836] pci 0000:02:00.0: reg 1c: [io 0x2030-0x2033]
    [ 0.136852] pci 0000:02:00.0: reg 20: [io 0x2000-0x201f]
    [ 0.136868] pci 0000:02:00.0: reg 24: [mem 0x53200000-0x532001ff]
    [ 0.136885] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.146676] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.146682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.146687] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.146740] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.146747] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.146798] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.146805] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.146858] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.146866] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.146917] pci 0000:06:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.146938] pci 0000:06:05.0: reg 10: [mem 0x53101000-0x53101fff]
    [ 0.147024] pci 0000:06:05.0: supports D1 D2
    [ 0.147027] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.147053] pci 0000:06:08.0: [8086:1064] type 00 class 0x020000
    [ 0.147074] pci 0000:06:08.0: reg 10: [mem 0x53100000-0x53100fff]
    [ 0.147086] pci 0000:06:08.0: reg 14: [io 0x1000-0x103f]
    [ 0.147161] pci 0000:06:08.0: supports D1 D2
    [ 0.147164] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.147208] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
    [ 0.147214] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.147219] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.147227] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.147231] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.147260] pci_bus 0000:00: on NUMA node 0
    [ 0.147266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.147465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    [ 0.147735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.147802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [ 0.147870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    [ 0.147936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [ 0.148039] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.148044] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.148047] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.152485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.152676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.153367] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.153374] vgaarb: loaded
    [ 0.153377] vgaarb: bridge control possible 0000:01:00.0
    [ 0.153377] PCI: Using ACPI for IRQ routing
    [ 0.160505] PCI: pci_cache_line_size set to 64 bytes
    [ 0.160612] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.160616] reserve RAM buffer: 000000003fe54000 - 000000003fffffff
    [ 0.160771] NetLabel: Initializing
    [ 0.160775] NetLabel: domain hash size = 128
    [ 0.160777] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.160799] NetLabel: unlabeled traffic allowed by default
    [ 0.160906] hpet clockevent registered
    [ 0.160911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.160917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.160924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.173350] Switching to clocksource hpet
    [ 0.182676] pnp: PnP ACPI init
    [ 0.182706] ACPI: bus type pnp registered
    [ 0.184200] pnp 00:00: [bus 00-ff]
    [ 0.184205] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.184209] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.184212] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.184216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.184219] pnp 00:00: [mem 0x000c0000-0x000fffff window]
    [ 0.184223] pnp 00:00: [mem 0xf0000000-0xfbffffff window]
    [ 0.184229] pnp 00:00: [mem 0x40000000-0xe0000000 window]
    [ 0.184297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.184317] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.184321] pnp 00:01: [mem 0xfed13000-0xfed13fff]
    [ 0.184324] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.184327] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.184330] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.184333] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.184336] pnp 00:01: [mem 0xfed20000-0xfed9ffff]
    [ 0.184412] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.184417] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.184421] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.184425] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.184429] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.184432] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.184436] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved
    [ 0.184442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.184642] pnp 00:02: [io 0x0000-0x000f]
    [ 0.184646] pnp 00:02: [io 0x0081-0x0083]
    [ 0.184649] pnp 00:02: [io 0x0087]
    [ 0.184652] pnp 00:02: [io 0x0089-0x008b]
    [ 0.184655] pnp 00:02: [io 0x008f]
    [ 0.184658] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.184661] pnp 00:02: [dma 4]
    [ 0.184706] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.184723] pnp 00:03: [io 0x0070-0x0071]
    [ 0.184726] pnp 00:03: [io 0x0074-0x0077]
    [ 0.184740] pnp 00:03: [irq 8]
    [ 0.184783] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.184802] pnp 00:04: [io 0x00f0]
    [ 0.184810] pnp 00:04: [irq 13]
    [ 0.184854] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.184871] pnp 00:05: [io 0x0061]
    [ 0.184919] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.184938] pnp 00:06: [io 0x0500-0x053f]
    [ 0.184942] pnp 00:06: [io 0x0400-0x047f]
    [ 0.184945] pnp 00:06: [io 0x0092]
    [ 0.184948] pnp 00:06: [io 0x0680-0x06ff]
    [ 0.184951] pnp 00:06: [io 0x0010-0x001f]
    [ 0.184954] pnp 00:06: [io 0x0072-0x0073]
    [ 0.184956] pnp 00:06: [io 0x0080]
    [ 0.184959] pnp 00:06: [io 0x0084-0x0086]
    [ 0.184962] pnp 00:06: [io 0x0088]
    [ 0.184965] pnp 00:06: [io 0x008c-0x008e]
    [ 0.184968] pnp 00:06: [io 0x0090-0x009f]
    [ 0.185047] system 00:06: [io 0x0500-0x053f] has been reserved
    [ 0.185051] system 00:06: [io 0x0400-0x047f] has been reserved
    [ 0.185055] system 00:06: [io 0x0680-0x06ff] has been reserved
    [ 0.185061] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.185320] pnp 00:07: [io 0x0378-0x037f]
    [ 0.185329] pnp 00:07: [irq 7]
    [ 0.185426] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.185514] pnp 00:08: [irq 12]
    [ 0.185563] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [ 0.185600] pnp 00:09: [io 0x0060]
    [ 0.185604] pnp 00:09: [io 0x0064]
    [ 0.185611] pnp 00:09: [irq 1]
    [ 0.185661] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.185822] pnp 00:0a: [io 0x03f8-0x03ff]
    [ 0.185831] pnp 00:0a: [irq 4]
    [ 0.185938] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.185964] pnp 00:0b: [mem 0xfec00000-0xfec000ff]
    [ 0.186015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.186047] pnp: PnP ACPI: found 12 devices
    [ 0.186049] ACPI: ACPI bus type pnp unregistered
    [ 0.224576] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.224583] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.224623] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-02] add_size 200000
    [ 0.224635] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
    [ 0.224640] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
    [ 0.224651] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
    [ 0.224656] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
    [ 0.224667] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
    [ 0.224672] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
    [ 0.224692] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.224696] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224701] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224705] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224709] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224713] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224717] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224726] pci 0000:00:1c.0: BAR 15: assigned [mem 0x53700000-0x539fffff pref]
    [ 0.224731] pci 0000:00:1c.1: BAR 15: assigned [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224736] pci 0000:00:1c.2: BAR 15: assigned [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224740] pci 0000:00:1c.3: BAR 15: assigned [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224745] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.224750] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.224754] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.224761] pci 0000:01:00.0: BAR 6: assigned [mem 0x53080000-0x530fffff pref]
    [ 0.224765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.224770] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.224775] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.224780] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.224788] pci 0000:02:00.0: BAR 6: assigned [mem 0x53700000-0x5370ffff pref]
    [ 0.224791] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.224796] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.224802] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.224807] pci 0000:00:1c.0: bridge window [mem 0x53700000-0x539fffff pref]
    [ 0.224815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.224819] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.224825] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.224831] pci 0000:00:1c.1: bridge window [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224838] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.224842] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.224849] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.224854] pci 0000:00:1c.2: bridge window [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224861] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.224865] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
    [ 0.224872] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.224877] pci 0000:00:1c.3: bridge window [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224885] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
    [ 0.224889] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.224895] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.224959] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.224966] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.224969] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.224974] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.224977] pci_bus 0000:01: resource 1 [mem 0x52000000-0x530fffff]
    [ 0.224980] pci_bus 0000:01: resource 2 [mem 0x40000000-0x51ffffff pref]
    [ 0.224984] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.224987] pci_bus 0000:02: resource 1 [mem 0x53200000-0x532fffff]
    [ 0.224990] pci_bus 0000:02: resource 2 [mem 0x53700000-0x539fffff pref]
    [ 0.224994] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.224997] pci_bus 0000:03: resource 1 [mem 0x53400000-0x534fffff]
    [ 0.225001] pci_bus 0000:03: resource 2 [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.225004] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    [ 0.225007] pci_bus 0000:04: resource 1 [mem 0x53500000-0x535fffff]
    [ 0.225011] pci_bus 0000:04: resource 2 [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.225014] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
    [ 0.225018] pci_bus 0000:05: resource 1 [mem 0x53600000-0x536fffff]
    [ 0.225021] pci_bus 0000:05: resource 2 [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.225025] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
    [ 0.225028] pci_bus 0000:06: resource 1 [mem 0x53100000-0x531fffff]
    [ 0.225031] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.225035] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.225091] NET: Registered protocol family 2
    [ 0.225171] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.225391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.225895] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.226187] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.226190] TCP: reno registered
    [ 0.226195] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226208] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226329] NET: Registered protocol family 1
    [ 0.226637] pci 0000:01:00.0: Boot video device
    [ 0.226698] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.226709] PCI: CLS 0 bytes, default 64
    [ 0.226780] Unpacking initramfs...
    [ 0.315303] Freeing initrd memory: 2900k freed
    [ 0.317191] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.317195] apm: disabled - APM is not SMP safe.
    [ 0.317515] audit: initializing netlink socket (disabled)
    [ 0.317533] type=2000 audit(1342552654.316:1): initialized
    [ 0.317976] highmem bounce pool size: 64 pages
    [ 0.317984] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320723] VFS: Disk quotas dquot_6.5.2
    [ 0.320797] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320931] msgmni has been set to 1740
    [ 0.321235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.321282] io scheduler noop registered
    [ 0.321287] io scheduler deadline registered
    [ 0.321299] io scheduler cfq registered (default)
    [ 0.321473] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.321588] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.321708] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.321830] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.321950] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
    [ 0.322243] GHES: HEST is not enabled!
    [ 0.322264] isapnp: Scanning for PnP cards...
    [ 0.678327] isapnp: No Plug & Play device found
    [ 0.678412] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.698985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720023] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.723503] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.723558] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.723755] mousedev: PS/2 mouse device common for all mice
    [ 0.723869] rtc_cmos 00:03: RTC can wake from S4
    [ 0.724031] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.724060] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 0.724098] cpuidle: using governor ladder
    [ 0.724101] cpuidle: using governor menu
    [ 0.724316] TCP: cubic registered
    [ 0.724489] NET: Registered protocol family 10
    [ 0.724741] NET: Registered protocol family 17
    [ 0.724748] Registering the dns_resolver key type
    [ 0.724796] Using IPI No-Shortcut mode
    [ 0.724971] PM: Hibernation image not present or could not be loaded.
    [ 0.724985] registered taskstats version 1
    [ 0.725540] rtc_cmos 00:03: setting system clock to 2012-07-17 19:17:35 UTC (1342552655)
    [ 0.725588] Initializing network drop monitor service
    [ 0.726860] Freeing unused kernel memory: 524k freed
    [ 0.727195] Write protecting the kernel text: 3812k
    [ 0.727226] Write protecting the kernel read-only data: 1120k
    [ 0.740567] systemd-udevd[41]: starting version 186
    [ 0.742721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.745749] SCSI subsystem initialized
    [ 0.749328] libata version 3.00 loaded.
    [ 0.750857] ahci 0000:02:00.0: version 3.0
    [ 0.750961] ahci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.751021] ahci: SSS flag set, parallel bus scan disabled
    [ 0.751069] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 0.751077] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
    [ 0.752850] scsi0 : ahci
    [ 0.753200] scsi1 : ahci
    [ 0.753383] ata1: SATA max UDMA/133 abar m512@0x53200000 port 0x53200100 irq 45
    [ 0.753391] ata2: SATA max UDMA/133 abar m512@0x53200000 port 0x53200180 irq 45
    [ 1.240043] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.252105] ata1.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133
    [ 1.252110] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.262069] ata1.00: configured for UDMA/133
    [ 1.262262] scsi 0:0:0:0: Direct-Access ATA OCZ-SOLID3 2.15 PQ: 0 ANSI: 5
    [ 1.264029] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.264196] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.264203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.264257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.265654] sda: sda1 sda2 sda3 sda4
    [ 1.266383] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.320034] Refined TSC clocksource calibration: 2999.980 MHz.
    [ 1.320041] Switching to clocksource tsc
    [ 1.746702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.747318] ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
    [ 1.747323] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.747889] ata2.00: configured for UDMA/133
    [ 1.748030] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
    [ 1.748540] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
    [ 1.748547] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.748667] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.748674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.748725] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.793835] sdb: sdb1
    [ 1.794347] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.892420] usbcore: registered new interface driver usbfs
    [ 1.892471] usbcore: registered new interface driver hub
    [ 1.895559] ata_piix 0000:00:1f.1: version 2.13
    [ 1.895639] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.897473] usbcore: registered new device driver usb
    [ 1.898382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.898429] scsi2 : ata_piix
    [ 1.899754] scsi3 : ata_piix
    [ 1.900600] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    [ 1.900605] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    [ 1.900676] ata4: port disabled--ignoring
    [ 1.901417] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.901473] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.904508] scsi4 : ata_piix
    [ 1.905087] scsi5 : ata_piix
    [ 1.905220] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    [ 1.905227] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    [ 1.905347] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.905355] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.905401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 1.905444] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.905558] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.909355] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.909393] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x53304000
    [ 1.916865] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.917873] hub 1-0:1.0: USB hub found
    [ 1.917883] hub 1-0:1.0: 8 ports detected
    [ 1.918079] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.918087] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.918109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.918149] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    [ 1.918445] hub 2-0:1.0: USB hub found
    [ 1.918456] hub 2-0:1.0: 2 ports detected
    [ 1.918663] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.918671] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.918692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 1.918728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    [ 1.919043] hub 3-0:1.0: USB hub found
    [ 1.919053] hub 3-0:1.0: 2 ports detected
    [ 1.919306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.919314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.919338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 1.919391] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    [ 1.919771] hub 4-0:1.0: USB hub found
    [ 1.919781] hub 4-0:1.0: 2 ports detected
    [ 1.920058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 1.920066] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 1.920085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 1.920162] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    [ 1.920720] hub 5-0:1.0: USB hub found
    [ 1.920731] hub 5-0:1.0: 2 ports detected
    [ 2.068266] ata6.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133
    [ 2.068272] ata6.00: 390721968 sectors, multi 16: LBA48
    [ 2.074099] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
    [ 2.074104] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.081454] ata6.00: configured for UDMA/133
    [ 2.100167] ata5.01: ATA-8: ST3500418AS, CC34, max UDMA/133
    [ 2.100172] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.107102] ata5.00: configured for UDMA/133
    [ 2.162850] ata5.01: configured for UDMA/133
    [ 2.173642] ata3.00: ATAPI: SONY DVD RW DRU-530A, 2.1g, max UDMA/33
    [ 2.173649] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BGS4, max UDMA/66
    [ 2.173654] ata3.01: limited to UDMA/33 due to 40-wire cable
    [ 2.186862] ata3.00: configured for UDMA/33
    [ 2.200194] ata3.01: configured for UDMA/33
    [ 2.201725] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-530A 2.1g PQ: 0 ANSI: 5
    [ 2.202839] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BGS4 PQ: 0 ANSI: 5
    [ 2.203271] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
    [ 2.203548] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.203557] sd 4:0:0:0: [sdc] 4096-byte physical blocks
    [ 2.203683] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.203690] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.203749] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.203803] scsi 4:0:1:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
    [ 2.204553] scsi 5:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5
    [ 2.204737] sd 4:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.204849] sd 5:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
    [ 2.204969] sd 5:0:0:0: [sde] Write Protect is off
    [ 2.204976] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 2.205029] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.223374] usb 1-2: new high-speed USB device number 2 using ehci_hcd
    [ 2.225847] sdc: sdc1
    [ 2.225864] sd 4:0:1:0: [sdd] Write Protect is off
    [ 2.225872] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
    [ 2.225944] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.226606] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 2.242524] sdd: sdd1
    [ 2.243011] sd 4:0:1:0: [sdd] Attached SCSI disk
    [ 2.250598] sde: sde2 sde3 < sde5 sde6 >
    [ 2.251325] sd 5:0:0:0: [sde] Attached SCSI disk
    [ 2.263852] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 2.263860] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.265692] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 2.269125] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.270115] sr 2:0:1:0: Attached scsi CD-ROM sr1
    [ 2.453377] usb 1-3: new high-speed USB device number 3 using ehci_hcd
    [ 2.630176] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input1
    [ 2.630296] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
    [ 2.630361] usbcore: registered new interface driver usbhid
    [ 2.630366] usbhid: USB HID core driver
    [ 2.720033] usb 1-5: new high-speed USB device number 4 using ehci_hcd
    [ 2.992001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.123459] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.170371] systemd[1]: systemd 186 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 3.189960] systemd[1]: Inserted module 'autofs4'
    [ 3.190421] systemd[1]: Set hostname to <bbq>.
    [ 3.347408] systemd[1]: Cannot add dependency job for unit exportfs.service, ignoring: Unit exportfs.service failed to load: No such file or directory. See system logs and 'systemctl status exportfs.service' for details.
    [ 3.347444] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory. See system logs and 'systemctl status arch-daemons.target' for details.
    [ 3.347509] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 3.600924] systemd-readahead[134]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
    [ 3.890242] systemd-udevd[139]: starting version 186
    [ 3.928976] systemd-journald[146]: Fixed max_use=50.2M max_size=6.2M min_size=64.0K keep_free=25.1M
    [ 3.929449] systemd-journald[146]: Vacuuming...
    [ 4.016020] FS-Cache: Loaded
    [ 4.026904] RPC: Registered named UNIX socket transport module.
    [ 4.026909] RPC: Registered udp transport module.
    [ 4.026912] RPC: Registered tcp transport module.
    [ 4.026914] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 4.068138] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.071885] NFS: Registering the id_resolver key type
    [ 4.071920] FS-Cache: Netfs 'nfs' registered for caching
    [ 4.090493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.103300] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 4.106821] ACPI: Sleep Button [SLPB]
    [ 4.114494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.114509] ACPI: Power Button [PWRF]
    [ 4.135074] parport_pc 00:07: reported by Plug and Play ACPI
    [ 4.135106] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 4.157067] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.178255] Linux agpgart interface v0.103
    [ 4.202375] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 4.203197] hda_intel: Disabling MSI
    [ 4.255263] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.255267] intel_rng: don't want to disable this in firmware setup, and if
    [ 4.255271] intel_rng: you are certain that your system has a functional
    [ 4.255274] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [ 4.273750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 4.273757] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.274079] iTCO_vendor_support: vendor-support=0
    [ 4.285411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 4.285661] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285769] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.380102] usbcore: registered new interface driver uas
    [ 4.415911] Initializing USB Mass Storage driver...
    [ 4.423630] scsi6 : usb-storage 1-3:1.0
    [ 4.423883] usbcore: registered new interface driver usb-storage
    [ 4.423888] USB Mass Storage support registered.
    [ 4.426642] e100 0000:06:08.0: eth0: addr 0x53100000, irq 20, MAC addr 00:11:11:9d:19:91
    [ 4.434273] scsi7 : usb-storage 1-5:1.0
    [ 4.434499] usbcore: registered new interface driver ums-cypress
    [ 4.475410] psmouse serio1: hgpk: ID: 10 00 64
    [ 4.480175] firewire_ohci 0000:06:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 4.487522] microcode: CPU0 sig=0xf41, pf=0x10, revision=0xd
    [ 4.506728] Registered IR keymap rc-ati-x10
    [ 4.507019] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0/input5
    [ 4.507357] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0
    [ 4.507587] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
    [ 4.507783] usbcore: registered new interface driver ati_remote
    [ 4.530507] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127
    [ 4.687581] ppdev: user-space parallel port driver
    [ 4.761362] Adding 1047928k swap on /dev/sda2. Priority:-1 extents:1 across:1047928k SS
    [ 4.804984] microcode: CPU1 sig=0xf41, pf=0x10, revision=0xd
    [ 4.814875] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.814882] Disabling lock debugging due to kernel taint
    [ 4.822000] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.926478] fuse init (API version 7.18)
    [ 4.970217] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 4.971016] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.971676] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.971943] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.980870] firewire_core 0000:06:05.0: created device fw0: GUID 00111100009d1991, S400
    [ 4.981627] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 4.982035] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
    [ 5.031213] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input11
    [ 5.432483] scsi 6:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
    [ 5.436924] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 5.437226] scsi 7:0:0:0: Direct-Access WDC WD25 00JB-00GVA0 PQ: 0 ANSI: 0
    [ 5.438100] sd 7:0:0:0: [sdg] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 5.439101] sd 7:0:0:0: [sdg] Write Protect is off
    [ 5.439109] sd 7:0:0:0: [sdg] Mode Sense: 33 00 00 00
    [ 5.439482] sd 6:0:0:0: [sdf] Write Protect is off
    [ 5.439489] sd 6:0:0:0: [sdf] Mode Sense: 10 00 00 00
    [ 5.440101] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.442224] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.463763] sdg: sdg1 sdg2
    [ 5.467100] sd 7:0:0:0: [sdg] Attached SCSI disk
    [ 5.469267] sdf: sdf1
    [ 5.491846] sd 6:0:0:0: [sdf] Attached SCSI disk
    [ 36.480046] usb 1-5: reset high-speed USB device number 4 using ehci_hcd
    [ 37.347138] systemd-journald[146]: Fixed max_use=1.4G max_size=128.0M min_size=64.0K keep_free=765.3M
    [ 37.347165] systemd-journald[146]: Flushing to /var...
    [ 37.837240] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
    [ 37.906826] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.068461] EXT4-fs (sde6): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.194403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.740678] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.747081] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.486016] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 39.599796] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 39.600119] NFSD: starting 90-second grace period
    [ 40.579508] Netfilter messages via NETLINK v0.30.
    [ 40.594917] nf_conntrack version 0.5.0 (16078 buckets, 64312 max)
    [ 40.746099] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 40.747318] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    [ 40.747325] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    [ 40.786415] ctnetlink v0.93: registering with nfnetlink.
    [ 40.886321] ip_set: protocol 6
    [ 40.898284] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
    [ 41.762042] xt_time: kernel timezone is -0000
    [ 42.318176] Bridge firewalling registered
    [ 42.704278] u32 classifier
    [ 42.704284] input device check on
    [ 42.704287] Actions configured
    [ 43.154527] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 43.156826] e100 0000:06:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
    [ 43.157214] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 44.557798] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 44.872612] [drm] Initialized drm 1.1.0 20060810
    [ 44.881629] wmi: Mapper loaded
    [ 51.096207] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.105163] zram: Unknown parameter `zram_num_devices'
    [ 51.148183] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.148690] zram: Creating 2 devices ...
    [ 51.398897] Adding 514496k swap on /dev/zram0. Priority:100 extents:1 across:514496k SS
    [ 51.406500] Adding 514496k swap on /dev/zram1. Priority:100 extents:1 across:514496k SS
    [ 76.005728] bootchart-collector started as pid 1586 with 2 args: '--dump' '/tmp/bootchart.94K3Fb6yom'
    [ 76.005734] Extracting profile data from pid 178
    [ 76.005736] map 0xbfe14000 -> 0xbfe35000 size: 132k from 'bfe14000' 'bfe35000'
    [ 76.005739] read 135168 bytes of 135168
    [ 76.005741] reading 101 chunks (of 101) ... wrote 12527 kb
    [ 76.005743] bootchart-collector pid: 1586 unmounted proc / clean exit
    Linux 3.3.8-1, Nvidia 295.49-1 Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 13:24:07 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb70000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 3752a000 - 377fd833
    [ 0.000000] Move RAMDISK from 000000003fb70000 - 000000003fe43832 to 3752a000 - 377fd832
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d29200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d08000 s30848 r0 d22400 u53248
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025660k/1046864k available (3774k kernel code, 20752k reserved, 1434k data, 520k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af9a9 - 0xc0616400 (1434 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af9a9 (3774 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3000.097 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.20 BogoMIPS (lpj=10000323)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.006921] Initializing cgroup subsys cpuacct
    [ 0.006925] Initializing cgroup subsys memory
    [ 0.006936] Initializing cgroup subsys devices
    [ 0.006939] Initializing cgroup subsys freezer
    [ 0.006942] Initializing cgroup subsys net_cls
    [ 0.006945] Initializing cgroup subsys blkio
    [ 0.006989] CPU: Physical Processor ID: 0
    [ 0.006992] CPU: Processor Core ID: 0
    [ 0.006995] mce: CPU supports 4 MCE banks
    [ 0.007009] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007014] using mwait in idle threads.
    [ 0.010636] ACPI: Core revision 20120111
    [ 0.013347] ftrace: allocating 16622 entries in 33 pages
    [ 0.020077] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054563] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.056663] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.056663] ... version: 0
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 18
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 0000007fffffffff
    [ 0.056663] ... fixed-purpose events: 0
    [ 0.056663] ... event mask: 000000000003ffff
    [ 0.073415] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100018] CPU 1 irqstacks, hard=f64a4000 soft=f64a6000
    [ 0.100021] Booting Node 0, Processors #1 Ok.
    [ 0.100025] smpboot cpu 1: start_ip = 9a000
    [ 0.009999] Initializing CPU#1
    [ 0.113372] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.120000] Brought up 2 CPUs
    [ 0.120006] Total of 2 processors activated (12005.40 BogoMIPS).
    [ 0.120978] devtmpfs: initialized
    [ 0.120978] PM: Registering ACPI NVS region at 3fe54000 (606208 bytes)
    [ 0.120978] NET: Registered protocol family 16
    [ 0.120978] ACPI: bus type pci registered
    [ 0.120978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.120978] PCI: not using MMCONFIG
    [ 0.123293] PCI: Using configuration type 1 for base access
    [ 0.126717] bio: create slab <bio-0> at 0
    [ 0.126739] ACPI: Added _OSI(Module Device)
    [ 0.126739] ACPI: Added _OSI(Processor Device)
    [ 0.126739] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.126739] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.127496] ACPI: EC: Look up EC in DSDT
    [ 0.127496] ACPI: Interpreter enabled
    [ 0.127496] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.127496] ACPI: Using IOAPIC for interrupt routing
    [ 0.127496] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.127496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.127496] PCI: Using MMCONFIG for extended config space
    [ 0.131872] ACPI: No dock devices found.
    [ 0.131883] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.133334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136111] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.136116] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.136120] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.136123] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.136127] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.136131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.136134] PCI: root bus 00: using default resources
    [ 0.136196] PCI host bridge to bus 0000:00
    [ 0.136201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.136206] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.136220] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600
    [ 0.136283] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604
    [ 0.136340] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.13639

    And here is the output of alsa-info.sh which I have also added to the original post:
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.61
    !!Script ran on: Wed Jul 18 00:10:56 UTC 2012
    !!Linux Distribution
    Arch Linux \r (\l) DISTRIB_ID=archlinux DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="http://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
    !!DMI Information
    Manufacturer:
    Product Name: 507GR
    Product Version:
    Firmware Version: AG91510J.15A.0816.2005.0214.1818
    !!Kernel Information
    Kernel release: 3.4.4-3-ARCH
    Operating System: GNU/Linux
    Architecture: i686
    Processor: unknown
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: 1.0.25
    Library version: 1.0.25
    Utilities version: 1.0.25
    !!Loaded ALSA modules
    snd_hda_intel
    snd_hda_intel
    !!Sound Servers on this system
    Jack:
    Installed - Yes (/usr/bin/jackd)
    Running - No
    !!Soundcards recognised by ALSA
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0x53300000 irq 46
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0x53000000 irq 17
    !!PCI Soundcards installed in the system
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    !!Advanced information - PCI Vendor/Device/Subsystem ID's
    00:1b.0 0403: 8086:2668 (rev 03)
    Subsystem: 107b:4037
    01:00.1 0403: 10de:0be3 (rev a1)
    Subsystem: 1043:8354
    !!Loaded sound module options
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!HDA-Intel Codec information
    --startcollapse--
    Codec: Realtek ALC880
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10ec0880
    Subsystem Id: 0x08600000
    Revision Id: 0x90000
    No Modem Function Group found
    Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    Node 0x02 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x03 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x04 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x05 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Node 0x07 [Vendor Defined Widget] wcaps 0xf0051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals:
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 0
    Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 7
    0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
    Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 10
    0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
    Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
    Converter: stream=0, channel=0
    SDI-Select: 0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x1f
    Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
    Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0xa3 0xa3] [0x80 0x80] [0x80 0x80]
    Connection: 8
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
    Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x02 0x0b
    Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x03 0x0b
    Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x04 0x0b
    Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x05 0x0b
    Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0c
    Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0d
    Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0e
    Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x10
    Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x11
    Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Control: name="Line Jack", index=0, device=0
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x01810000: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x12
    Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x13
    Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1d [Pin Complex] wcaps 0x400000: Mono
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
    Pincap 0x00000010: OUT
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Connection: 1
    0x06
    Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
    Processing caps: benign=0, ncoeff=10
    Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
    Volume-Knob: delta=0, steps=64, direct=0, val=0
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 0
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=0, device=0
    Control: name="IEC958 Playback Pro Mask", index=0, device=0
    Control: name="IEC958 Playback Default", index=0, device=0
    Control: name="IEC958 Playback Switch", index=0, device=0
    Control: name="ELD", index=0, device=3
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 1
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=1, device=0
    Control: name="IEC958 Playback Pro Mask", index=1, device=0
    Control: name="IEC958 Playback Default", index=1, device=0
    Control: name="IEC958 Playback Switch", index=1, device=0
    Control: name="ELD", index=0, device=7
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=2, device=0
    Control: name="IEC958 Playback Pro Mask", index=2, device=0
    Control: name="IEC958 Playback Default", index=2, device=0
    Control: name="IEC958 Playback Switch", index=2, device=0
    Control: name="ELD", index=0, device=8
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 3
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=9 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=3, device=0
    Control: name="IEC958 Playback Pro Mask", index=3, device=0
    Control: name="IEC958 Playback Default", index=3, device=0
    Control: name="IEC958 Playback Switch", index=3, device=0
    Control: name="ELD", index=0, device=9
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 3 Jul 17 17:07 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 12 Jul 17 17:07 /dev/snd/controlC1
    crw-rw----+ 1 root audio 116, 2 Jul 17 17:07 /dev/snd/hwC0D2
    crw-rw----+ 1 root audio 116, 11 Jul 17 17:07 /dev/snd/hwC1D0
    crw-rw----+ 1 root audio 116, 10 Jul 17 17:07 /dev/snd/hwC1D1
    crw-rw----+ 1 root audio 116, 9 Jul 17 17:07 /dev/snd/hwC1D2
    crw-rw----+ 1 root audio 116, 8 Jul 17 17:07 /dev/snd/hwC1D3
    crw-rw----+ 1 root audio 116, 7 Jul 17 17:07 /dev/snd/pcmC1D3p
    crw-rw----+ 1 root audio 116, 6 Jul 17 17:07 /dev/snd/pcmC1D7p
    crw-rw----+ 1 root audio 116, 5 Jul 17 17:07 /dev/snd/pcmC1D8p
    crw-rw----+ 1 root audio 116, 4 Jul 17 17:07 /dev/snd/pcmC1D9p
    crw-rw---- 1 root audio 116, 1 Jul 17 17:07 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 33 Jul 17 17:07 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 80 Jul 17 17:07 .
    drwxr-xr-x 3 root root 320 Jul 17 17:07 ..
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:00:1b.0 -> ../controlC0
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:01:00.1 -> ../controlC1
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    !!Amixer output
    !!-------Mixer controls for card 0 [Intel]
    Card hw:0 'Intel'/'HDA Intel at 0x53300000 irq 46'
    Mixer name : 'Realtek ALC880'
    Components : 'HDA:10ec0880,08600000,00090000'
    Controls : 4
    Simple ctrls : 2
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 65
    Mono:
    Front Left: Playback 35 [54%] [0.00dB] [off]
    Front Right: Playback 35 [54%] [0.00dB] [off]
    !!-------Mixer controls for card 1 [NVidia]
    Card hw:1 'NVidia'/'HDA NVidia at 0x53000000 irq 17'
    Mixer name : 'Nvidia GPU 0b HDMI/DP'
    Components : 'HDA:10de000b,10de0101,00100200'
    Controls : 24
    Simple ctrls : 4
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',1
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',2
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',3
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    !!Alsactl output
    --startcollapse--
    state.Intel {
    control.1 {
    iface MIXER
    name 'Beep Playback Volume'
    value.0 35
    value.1 35
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 65'
    dbmin -3500
    dbmax 3000
    dbvalue.0 0
    dbvalue.1 0
    control.2 {
    iface MIXER
    name 'Beep Playback Switch'
    value.0 false
    value.1 false
    comment {
    access 'read write'
    type BOOLEAN
    count 2
    control.3 {
    iface CARD
    name 'Line Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.4 {
    iface MIXER
    name 'PCM Playback Volume'
    value.0 255
    value.1 255
    comment {
    access 'read write user'
    type INTEGER
    count 2
    range '0 - 255'
    tlv '0000000100000008ffffec1400000014'
    dbmin -5100
    dbmax 0
    dbvalue.0 0
    dbvalue.1 0
    state.NVidia {
    control.1 {
    iface CARD
    name 'HDMI/DP,pcm=3 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.2 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.3 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.4 {
    iface MIXER
    name 'IEC958 Playback Default'
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.5 {
    iface MIXER
    name 'IEC958 Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.6 {
    iface PCM
    device 3
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.7 {
    iface CARD
    name 'HDMI/DP,pcm=7 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.8 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 1
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.9 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 1
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.10 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 1
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.11 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 1
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.12 {
    iface PCM
    device 7
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.13 {
    iface CARD
    name 'HDMI/DP,pcm=8 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.14 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 2
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.15 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 2
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.16 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 2
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.17 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 2
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.18 {
    iface PCM
    device 8
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.19 {
    iface CARD
    name 'HDMI/DP,pcm=9 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.20 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 3
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.21 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 3
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.22 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 3
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.23 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 3
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.24 {
    iface PCM
    device 9
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    --endcollapse--
    !!All Loaded Modules
    Module
    zram
    lm85
    hwmon_vid
    aes_i586
    cryptd
    aes_generic
    act_police
    cls_basic
    cls_flow
    cls_fw
    cls_u32
    sch_tbf
    sch_prio
    sch_htb
    sch_hfsc
    sch_ingress
    sch_sfq
    bridge
    stp
    llc
    xt_statistic
    xt_CT
    xt_LOG
    xt_time
    xt_connlimit
    xt_realm
    xt_addrtype
    iptable_raw
    xt_comment
    xt_recent
    xt_policy
    ipt_ULOG
    ipt_REJECT
    ipt_REDIRECT
    ipt_NETMAP
    ipt_MASQUERADE
    ipt_ECN
    ipt_CLUSTERIP
    ipt_ah
    xt_set
    ip_set
    nf_nat_tftp
    nf_nat_snmp_basic
    nf_conntrack_snmp
    nf_nat_sip
    nf_nat_pptp
    nf_nat_proto_gre
    nf_nat_irc
    nf_nat_h323
    nf_nat_ftp
    nf_nat_amanda
    ts_kmp
    nf_conntrack_amanda
    nf_conntrack_sane
    nf_conntrack_tftp
    nf_conntrack_sip
    nf_conntrack_proto_udplite
    nf_conntrack_proto_sctp
    nf_conntrack_pptp
    nf_conntrack_proto_gre
    nf_conntrack_netlink
    nf_conntrack_netbios_ns
    nf_conntrack_broadcast
    nf_conntrack_irc
    nf_conntrack_h323
    nf_conntrack_ftp
    xt_TPROXY
    nf_defrag_ipv6
    nf_tproxy_core
    ip6_tables
    xt_tcpmss
    xt_pkttype
    xt_physdev
    xt_owner
    xt_NFQUEUE
    xt_NFLOG
    nfnetlink_log
    xt_multiport
    xt_mark
    xt_mac
    xt_limit
    xt_length
    xt_iprange
    xt_helper
    xt_hashlimit
    xt_DSCP
    xt_dscp
    xt_dccp
    xt_conntrack
    xt_connmark
    xt_CLASSIFY
    xt_AUDIT
    xt_state
    iptable_nat
    nf_nat
    nf_conntrack_ipv4
    nf_defrag_ipv4
    nf_conntrack
    iptable_mangle
    nfnetlink
    xt_tcpudp
    iptable_filter
    ip_tables
    x_tables
    arc4
    fuse
    nvidia
    snd_hda_codec_hdmi
    ppdev
    ath9k_htc
    ath9k_common
    microcode
    ath9k_hw
    ath
    serio_raw
    psmouse
    evdev
    mac80211
    ums_cypress
    cfg80211
    compat
    usb_storage
    rfkill
    i2c_i801
    uas
    rc_ati_x10
    iTCO_wdt
    firewire_ohci
    ati_remote
    iTCO_vendor_support
    e100
    firewire_core
    mii
    rc_core
    crc_itu_t
    snd_hda_codec_realtek
    parport_pc
    parport
    snd_hda_intel
    snd_hda_codec
    snd_pcm
    snd_page_alloc
    snd_hwdep
    snd_timer
    nfsd
    exportfs
    intel_agp
    intel_gtt
    snd
    nfs
    i2c_core
    agpgart
    nfs_acl
    lockd
    soundcore
    auth_rpcgss
    button
    processor
    sunrpc
    fscache
    autofs4
    ext4
    crc16
    jbd2
    mbcache
    usbhid
    hid
    sr_mod
    cdrom
    pata_acpi
    ata_generic
    uhci_hcd
    ata_piix
    ehci_hcd
    usbcore
    usb_common
    sd_mod
    ahci
    libahci
    libata
    scsi_mod
    !!Sysfs Files
    /sys/class/sound/hwC0D2/init_pin_configs:
    0x14 0x00000000
    0x15 0x00000000
    0x16 0x00000000
    0x17 0x00000000
    0x18 0x00000000
    0x19 0x00000000
    0x1a 0x01810000
    0x1b 0x00000000
    0x1c 0x40000000
    0x1d 0x00000000
    0x1e 0x00000000
    0x1f 0x00000000
    /sys/class/sound/hwC0D2/driver_pin_configs:
    /sys/class/sound/hwC0D2/user_pin_configs:
    /sys/class/sound/hwC0D2/init_verbs:
    /sys/class/sound/hwC1D0/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D0/driver_pin_configs:
    /sys/class/sound/hwC1D0/user_pin_configs:
    /sys/class/sound/hwC1D0/init_verbs:
    /sys/class/sound/hwC1D1/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D1/driver_pin_configs:
    /sys/class/sound/hwC1D1/user_pin_configs:
    /sys/class/sound/hwC1D1/init_verbs:
    /sys/class/sound/hwC1D2/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D2/driver_pin_configs:
    /sys/class/sound/hwC1D2/user_pin_configs:
    /sys/class/sound/hwC1D2/init_verbs:
    /sys/class/sound/hwC1D3/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D3/driver_pin_configs:
    /sys/class/sound/hwC1D3/user_pin_configs:
    /sys/class/sound/hwC1D3/init_verbs:
    !!ALSA/HDA dmesg
    [ 3.398568] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 3.431145] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 3.462799] parport_pc 00:07: reported by Plug and Play ACPI
    [ 3.462832] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 3.467010] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 3.468096] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 3.471112] hda_intel: Disabling MSI
    [ 3.522125] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.173059] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 45 credits
    [ 4.263632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.263914] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.264134] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.264423] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 4.267027] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    I'll also see what kind of help I can get from the developers upstream.

  • [Closed]Bumblebee - Failed to initialize the NVIDIA GPU

    Hi,
    I'am having trouble with bumblebee. When i ran
    optirun glxgears -info
    I get the following error,
    [ 66.574]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 66.574] X Protocol Version 11, Revision 0
    [ 66.574] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 66.574] Current Operating System: Linux archlinux 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
    [ 66.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2136b55a-3c0b-4a13-a536-86d195e15fa8 ro
    [ 66.574] Build Date: 01 July 2013 10:48:42AM
    [ 66.574]
    [ 66.574] Current version of pixman: 0.30.0
    [ 66.574] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 66.574] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 66.574] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jul 30 19:25:29 2013
    [ 66.589] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 66.589] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 66.607] (==) ServerLayout "Layout0"
    [ 66.607] (==) No screen section available. Using defaults.
    [ 66.607] (**) |-->Screen "Default Screen Section" (0)
    [ 66.607] (**) | |-->Monitor "<default monitor>"
    [ 66.607] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 66.607] (**) | |-->Device "DiscreteNvidia"
    [ 66.607] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 66.607] (**) Option "AutoAddDevices" "false"
    [ 66.607] (**) Option "AutoAddGPU" "false"
    [ 66.607] (**) Not automatically adding devices
    [ 66.607] (==) Automatically enabling devices
    [ 66.607] (**) Not automatically adding GPU devices
    [ 66.607] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 66.607] Entry deleted from font path.
    [ 66.607] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 66.607] Entry deleted from font path.
    [ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 66.607] Entry deleted from font path.
    [ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 66.607] Entry deleted from font path.
    [ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 66.607] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 66.607] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 66.607] (==) |-->Input Device "<default pointer>"
    [ 66.607] (==) |-->Input Device "<default keyboard>"
    [ 66.607] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 66.607] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 66.607] (II) Loader magic: 0x7fdc20
    [ 66.607] (II) Module ABI versions:
    [ 66.607] X.Org ANSI C Emulation: 0.4
    [ 66.607] X.Org Video Driver: 14.1
    [ 66.607] X.Org XInput driver : 19.1
    [ 66.607] X.Org Server Extension : 7.0
    [ 66.607] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 66.608] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 66.608] setversion 1.4 failed
    [ 66.609] (--) PCI:*(0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 66.609] Initializing built-in extension Generic Event Extension
    [ 66.609] Initializing built-in extension SHAPE
    [ 66.609] Initializing built-in extension MIT-SHM
    [ 66.609] Initializing built-in extension XInputExtension
    [ 66.609] Initializing built-in extension XTEST
    [ 66.609] Initializing built-in extension BIG-REQUESTS
    [ 66.609] Initializing built-in extension SYNC
    [ 66.609] Initializing built-in extension XKEYBOARD
    [ 66.609] Initializing built-in extension XC-MISC
    [ 66.609] Initializing built-in extension SECURITY
    [ 66.609] Initializing built-in extension XINERAMA
    [ 66.609] Initializing built-in extension XFIXES
    [ 66.609] Initializing built-in extension RENDER
    [ 66.609] Initializing built-in extension RANDR
    [ 66.609] Initializing built-in extension COMPOSITE
    [ 66.609] Initializing built-in extension DAMAGE
    [ 66.609] Initializing built-in extension MIT-SCREEN-SAVER
    [ 66.609] Initializing built-in extension DOUBLE-BUFFER
    [ 66.609] Initializing built-in extension RECORD
    [ 66.609] Initializing built-in extension DPMS
    [ 66.609] Initializing built-in extension X-Resource
    [ 66.609] Initializing built-in extension XVideo
    [ 66.609] Initializing built-in extension XVideo-MotionCompensation
    [ 66.609] Initializing built-in extension XFree86-VidModeExtension
    [ 66.609] Initializing built-in extension XFree86-DGA
    [ 66.609] Initializing built-in extension XFree86-DRI
    [ 66.609] Initializing built-in extension DRI2
    [ 66.609] (II) LoadModule: "glx"
    [ 66.622] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 67.248] (II) Module glx: vendor="NVIDIA Corporation"
    [ 67.248] compiled for 4.0.2, module version = 1.0.0
    [ 67.248] Module class: X.Org Server Extension
    [ 67.248] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
    [ 67.257] Loading extension GLX
    [ 67.257] (II) LoadModule: "nvidia"
    [ 67.258] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 67.346] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 67.346] compiled for 4.0.2, module version = 1.0.0
    [ 67.346] Module class: X.Org Video Driver
    [ 67.354] (II) LoadModule: "mouse"
    [ 67.354] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 67.357] (II) Module mouse: vendor="X.Org Foundation"
    [ 67.357] compiled for 1.14.0, module version = 1.9.0
    [ 67.357] Module class: X.Org XInput Driver
    [ 67.357] ABI class: X.Org XInput driver, version 19.1
    [ 67.357] (II) LoadModule: "kbd"
    [ 67.358] (WW) Warning, couldn't open module kbd
    [ 67.358] (II) UnloadModule: "kbd"
    [ 67.358] (II) Unloading kbd
    [ 67.358] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 67.358] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
    [ 67.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 67.359] (--) using VT number 7
    [ 67.367] (II) Loading sub module "fb"
    [ 67.367] (II) LoadModule: "fb"
    [ 67.367] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 67.367] (II) Module fb: vendor="X.Org Foundation"
    [ 67.368] compiled for 1.14.2, module version = 1.0.0
    [ 67.368] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.368] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 67.368] (II) Loading sub module "wfb"
    [ 67.368] (II) LoadModule: "wfb"
    [ 67.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 67.376] (II) Module wfb: vendor="X.Org Foundation"
    [ 67.376] compiled for 1.14.2, module version = 1.0.0
    [ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.377] (II) Loading sub module "shadow"
    [ 67.377] (II) LoadModule: "shadow"
    [ 67.377] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 67.377] (II) Module shadow: vendor="X.Org Foundation"
    [ 67.377] compiled for 1.14.2, module version = 1.1.0
    [ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.377] (II) Loading sub module "ramdac"
    [ 67.377] (II) LoadModule: "ramdac"
    [ 67.377] (II) Module "ramdac" already built-in
    [ 67.378] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 67.378] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 67.378] (==) NVIDIA(0): RGB weight 888
    [ 67.378] (==) NVIDIA(0): Default visual is TrueColor
    [ 67.378] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 67.378] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 67.378] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 67.379] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 67.379] (**) NVIDIA(0): Enabling 2D acceleration
    [ 67.379] (**) NVIDIA(0): Ignoring EDIDs
    [ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 67.379] (**) NVIDIA(0): mode
    [ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 72.511] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 72.511] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 72.511] (EE) NVIDIA(0): README for additional information.
    [ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 72.511] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 72.512] (II) UnloadModule: "nvidia"
    [ 72.512] (II) UnloadSubModule: "shadow"
    [ 72.512] (II) UnloadSubModule: "wfb"
    [ 72.512] (II) UnloadSubModule: "fb"
    [ 72.512] (EE) Screen(s) found, but none have a usable configuration.
    [ 72.512] (EE)
    Fatal server error:
    [ 72.512] (EE) no screens found(EE)
    [ 72.512] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 72.512] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 72.512] (EE)
    [ 72.512] (EE) Server terminated with error (1). Closing log file.
    This is /etc/bumblebee/bumblebee.conf file;
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    In addition
    dmesg | grep nvidia
    does not return anything and
    modprobe nvidia
    returns
    modprobe: ERROR: could not insert 'nvidia': No such device
    There is no /etc/X11/xorg.conf file.
    Last edited by Selo (2013-07-30 19:41:25)

    Hello, I also I have that problem.
    $primusrun glxgears
    primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
    $grep -Fn '(EE' /var/log/Xorg.8.log
    15: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    105:[ 875.659] (EE) Failed to load module "mouse" (module does not exist, 0)
    110:[ 875.659] (EE) Failed to load module "kbd" (module does not exist, 0)
    153:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    154:[ 880.312] (EE) NVIDIA(0): check your system's kernel log for additional error
    155:[ 880.312] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    156:[ 880.312] (EE) NVIDIA(0): README for additional information.
    157:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    158:[ 880.312] (EE) NVIDIA(0): Failing initialization of X screen 0
    163:[ 880.312] (EE) Screen(s) found, but none have a usable configuration.
    164:[ 880.312] (EE)
    166:[ 880.312] (EE) no screens found(EE)
    167:[ 880.312] (EE)
    171:[ 880.312] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    172:[ 880.313] (EE)
    173:[ 880.313] (EE) Server terminated with error (1). Closing log file.

  • [Solved]xorg fails to start, integrated nvidia gpu with intel

    Arch 32 Bit system
    When i start X server it says server terminated succesfully.
    the output of "lspci | grep VGA"
    00:02:0 VGA Compatible Controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    01:00:0 VGA Compatible Controller: NVIDIA Corporation GF108M [GrForce GT 540M] (rev a1)
    I installed xf86-video-modesettings xf86-video-fbdev nvidia nvidia-libgl nvidia-utils xorg-server xorg-server-utils xorg-xinit xterm xorg-twm xorg-xclock
    I guess the problem is monitor cant be detected but i dont know how can i make nvidia to find it. Look at Monitor section at 10-nvidia.conf and also Xorg.0.log.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 337.12 (buildmeister@swio-display-x64-rhel04-18) Fri Apr 4 15:15:13 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    xorg.conf.d/10-nvidia.conf
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    EndSection
    xorg.conf.d/10-evdev.conf
    # Catch-all evdev loader for udev-based systems
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    xorg.conf.d/10-quirks.conf
    # Collection of quirks and blacklist/whitelists for specific devices.
    # Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
    # http://bugs.freedesktop.org/show_bug.cgi?id=22442
    Section "InputClass"
    Identifier "ThinkPad HDAPS accelerometer blacklist"
    MatchProduct "ThinkPad HDAPS accelerometer data"
    Option "Ignore" "on"
    EndSection
    xorg.conf.d/50-synaptics.conf
    # Example xorg.conf.d snippet that assigns the touchpad driver
    # to all touchpads. See xorg.conf.d(5) for more information on
    # InputClass.
    # DO NOT EDIT THIS FILE, your distribution will likely overwrite
    # it when updating. Copy (and rename) this file into
    # /etc/X11/xorg.conf.d first.
    # Additional options may be added in the form of
    # Option "OptionName" "value"
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    MatchIsTouchpad "on"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    # This option is recommend on all Linux systems using evdev, but cannot be
    # enabled by default. See the following link for details:
    # http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
    MatchDevicePath "/dev/input/event*"
    EndSection
    Section "InputClass"
    Identifier "touchpad ignore duplicates"
    MatchIsTouchpad "on"
    MatchOS "Linux"
    MatchDevicePath "/dev/input/mouse*"
    Option "Ignore" "on"
    EndSection
    # This option enables the bottom right corner to be a right button on
    # non-synaptics clickpads.
    # This option is only interpreted by clickpads.
    Section "InputClass"
    Identifier "Default clickpad buttons"
    MatchDriver "synaptics"
    Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    # To disable the bottom edge area so the buttons only work as buttons,
    # not for movement, set the AreaBottomEdge
    # Option "AreaBottomEdge" "82%"
    EndSection
    # This option disables software buttons on Apple touchpads.
    # This option is only interpreted by clickpads.
    Section "InputClass"
    Identifier "Disable clickpad buttons on Apple touchpads"
    MatchProduct "Apple|bcm5974"
    MatchDriver "synaptics"
    Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
    EndSection
    And finally
    /var/log/Xorg.0.log
    [ 37.622]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 37.622] X Protocol Version 11, Revision 0
    [ 37.622] Build Operating System: Linux 3.14.0-4-ARCH i686
    [ 37.622] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
    [ 37.622] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
    [ 37.623] Build Date: 14 April 2014 08:41:02AM
    [ 37.623]
    [ 37.623] Current version of pixman: 0.32.4
    [ 37.623] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 37.623] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 37.624] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 14:31:33 2014
    [ 37.644] (==) Using config file: "/etc/X11/xorg.conf"
    [ 37.644] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 37.680] (==) ServerLayout "Layout0"
    [ 37.680] (**) |-->Screen "Screen0" (0)
    [ 37.680] (**) | |-->Monitor "Monitor0"
    [ 37.680] (**) | |-->Device "Device0"
    [ 37.680] (**) |-->Input Device "Keyboard0"
    [ 37.681] (**) |-->Input Device "Mouse0"
    [ 37.681] (==) Automatically adding devices
    [ 37.681] (==) Automatically enabling devices
    [ 37.681] (==) Automatically adding GPU devices
    [ 37.725] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 37.725] Entry deleted from font path.
    [ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 37.726] Entry deleted from font path.
    [ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 37.726] Entry deleted from font path.
    [ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 37.726] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 37.726] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 37.726] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 37.726] (WW) Disabling Keyboard0
    [ 37.726] (WW) Disabling Mouse0
    [ 37.727] (II) Loader magic: 0x8264660
    [ 37.727] (II) Module ABI versions:
    [ 37.727] X.Org ANSI C Emulation: 0.4
    [ 37.727] X.Org Video Driver: 15.0
    [ 37.727] X.Org XInput driver : 20.0
    [ 37.727] X.Org Server Extension : 8.0
    [ 37.727] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 37.728] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 37.731] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
    [ 37.731] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 37.732] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 37.732] Initializing built-in extension Generic Event Extension
    [ 37.732] Initializing built-in extension SHAPE
    [ 37.732] Initializing built-in extension MIT-SHM
    [ 37.732] Initializing built-in extension XInputExtension
    [ 37.733] Initializing built-in extension XTEST
    [ 37.733] Initializing built-in extension BIG-REQUESTS
    [ 37.733] Initializing built-in extension SYNC
    [ 37.733] Initializing built-in extension XKEYBOARD
    [ 37.733] Initializing built-in extension XC-MISC
    [ 37.733] Initializing built-in extension SECURITY
    [ 37.733] Initializing built-in extension XINERAMA
    [ 37.733] Initializing built-in extension XFIXES
    [ 37.733] Initializing built-in extension RENDER
    [ 37.733] Initializing built-in extension RANDR
    [ 37.734] Initializing built-in extension COMPOSITE
    [ 37.734] Initializing built-in extension DAMAGE
    [ 37.734] Initializing built-in extension MIT-SCREEN-SAVER
    [ 37.734] Initializing built-in extension DOUBLE-BUFFER
    [ 37.734] Initializing built-in extension RECORD
    [ 37.734] Initializing built-in extension DPMS
    [ 37.734] Initializing built-in extension Present
    [ 37.736] Initializing built-in extension DRI3
    [ 37.739] Initializing built-in extension X-Resource
    [ 37.741] Initializing built-in extension XVideo
    [ 37.743] Initializing built-in extension XVideo-MotionCompensation
    [ 37.745] Initializing built-in extension XFree86-VidModeExtension
    [ 37.747] Initializing built-in extension XFree86-DGA
    [ 37.748] Initializing built-in extension XFree86-DRI
    [ 37.750] Initializing built-in extension DRI2
    [ 37.750] (II) LoadModule: "glx"
    [ 37.765] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 38.573] (II) Module glx: vendor="NVIDIA Corporation"
    [ 38.573] compiled for 4.0.2, module version = 1.0.0
    [ 38.573] Module class: X.Org Server Extension
    [ 38.573] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
    [ 38.575] Loading extension GLX
    [ 38.575] (II) LoadModule: "nvidia"
    [ 38.575] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 38.641] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 38.641] compiled for 4.0.2, module version = 1.0.0
    [ 38.641] Module class: X.Org Video Driver
    [ 38.652] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
    [ 38.653] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 38.654] (++) using VT number 2
    [ 38.655] (II) Loading sub module "fb"
    [ 38.655] (II) LoadModule: "fb"
    [ 38.656] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 38.668] (II) Module fb: vendor="X.Org Foundation"
    [ 38.668] compiled for 1.15.1, module version = 1.0.0
    [ 38.668] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 38.668] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 38.668] (II) Loading sub module "wfb"
    [ 38.668] (II) LoadModule: "wfb"
    [ 38.669] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 38.671] (II) Module wfb: vendor="X.Org Foundation"
    [ 38.671] compiled for 1.15.1, module version = 1.0.0
    [ 38.671] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 38.671] (II) Loading sub module "ramdac"
    [ 38.671] (II) LoadModule: "ramdac"
    [ 38.671] (II) Module "ramdac" already built-in
    [ 38.675] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 38.675] (==) NVIDIA(0): RGB weight 888
    [ 38.675] (==) NVIDIA(0): Default visual is TrueColor
    [ 38.675] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 38.676] (**) NVIDIA(0): Enabling 2D acceleration
    [ 45.267] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 45.268] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 45.270] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
    [ 45.270] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 45.270] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
    [ 45.270] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 45.275] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
    [ 45.275] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 45.275] (--) NVIDIA(0): DFP-0
    [ 45.275] (--) NVIDIA(0): DFP-1
    [ 45.275] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 45.275] (--) NVIDIA(0): DFP-0: Internal LVDS
    [ 45.275] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
    [ 45.275] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 45.275] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 45.275] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45.275] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 45.275] (**) NVIDIA(0): all display devices.)
    [ 45.276] (==) NVIDIA(0):
    [ 45.276] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 45.276] (==) NVIDIA(0): will be used as the requested mode.
    [ 45.276] (==) NVIDIA(0):
    [ 45.277] (II) NVIDIA(0): Validated MetaModes:
    [ 45.277] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 45.277] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 45.281] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 45.281] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 45.281] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 45.281] (--) Depth 24 pixmap format is 32 bpp
    [ 45.281] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
    [ 45.281] (II) NVIDIA: access.
    [ 45.499] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 45.544] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 45.544] Loading extension NV-GLX
    [ 45.648] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 45.649] (==) NVIDIA(0): Backing store enabled
    [ 45.649] (==) NVIDIA(0): Silken mouse enabled
    [ 45.651] (**) NVIDIA(0): DPMS enabled
    [ 45.651] Loading extension NV-CONTROL
    [ 45.651] Loading extension XINERAMA
    [ 45.651] (II) Loading sub module "dri2"
    [ 45.651] (II) LoadModule: "dri2"
    [ 45.651] (II) Module "dri2" already built-in
    [ 45.651] (II) NVIDIA(0): [DRI2] Setup complete
    [ 45.652] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 45.652] (--) RandR disabled
    [ 45.673] (II) Initializing extension GLX
    [ 45.973] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 45.973] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 45.973] (II) LoadModule: "evdev"
    [ 45.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 46.007] (II) Module evdev: vendor="X.Org Foundation"
    [ 46.007] compiled for 1.15.0, module version = 2.8.2
    [ 46.007] Module class: X.Org XInput Driver
    [ 46.007] ABI class: X.Org XInput driver, version 20.0
    [ 46.007] (II) Using input driver 'evdev' for 'Power Button'
    [ 46.007] (**) Power Button: always reports core events
    [ 46.007] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 46.007] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 46.007] (--) evdev: Power Button: Found keys
    [ 46.007] (II) evdev: Power Button: Configuring as keyboard
    [ 46.007] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
    [ 46.007] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 46.007] (**) Option "xkb_rules" "evdev"
    [ 46.007] (**) Option "xkb_model" "pc104"
    [ 46.007] (**) Option "xkb_layout" "us"
    [ 46.062] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 46.063] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 46.063] (II) Using input driver 'evdev' for 'Video Bus'
    [ 46.063] (**) Video Bus: always reports core events
    [ 46.063] (**) evdev: Video Bus: Device: "/dev/input/event13"
    [ 46.063] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 46.063] (--) evdev: Video Bus: Found keys
    [ 46.063] (II) evdev: Video Bus: Configuring as keyboard
    [ 46.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
    [ 46.063] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 46.063] (**) Option "xkb_rules" "evdev"
    [ 46.063] (**) Option "xkb_model" "pc104"
    [ 46.063] (**) Option "xkb_layout" "us"
    [ 46.064] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 46.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 46.064] (II) Using input driver 'evdev' for 'Power Button'
    [ 46.064] (**) Power Button: always reports core events
    [ 46.064] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 46.064] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 46.064] (--) evdev: Power Button: Found keys
    [ 46.064] (II) evdev: Power Button: Configuring as keyboard
    [ 46.064] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
    [ 46.064] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 46.064] (**) Option "xkb_rules" "evdev"
    [ 46.064] (**) Option "xkb_model" "pc104"
    [ 46.064] (**) Option "xkb_layout" "us"
    [ 46.066] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 46.066] (II) No input driver specified, ignoring this device.
    [ 46.066] (II) This device may have been added with another device file.
    [ 46.066] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 46.066] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 46.066] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 46.066] (**) Sleep Button: always reports core events
    [ 46.066] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 46.066] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 46.066] (--) evdev: Sleep Button: Found keys
    [ 46.066] (II) evdev: Sleep Button: Configuring as keyboard
    [ 46.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
    [ 46.067] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 46.067] (**) Option "xkb_rules" "evdev"
    [ 46.067] (**) Option "xkb_model" "pc104"
    [ 46.067] (**) Option "xkb_layout" "us"
    [ 46.068] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 46.068] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 46.068] (II) Using input driver 'evdev' for 'Video Bus'
    [ 46.068] (**) Video Bus: always reports core events
    [ 46.068] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 46.068] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 46.068] (--) evdev: Video Bus: Found keys
    [ 46.068] (II) evdev: Video Bus: Configuring as keyboard
    [ 46.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
    [ 46.068] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
    [ 46.068] (**) Option "xkb_rules" "evdev"
    [ 46.068] (**) Option "xkb_model" "pc104"
    [ 46.068] (**) Option "xkb_layout" "us"
    [ 46.069] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 46.069] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 46.070] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event6)
    [ 46.070] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
    [ 46.070] (II) Using input driver 'evdev' for '1.3M HD WebCam'
    [ 46.070] (**) 1.3M HD WebCam: always reports core events
    [ 46.070] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event6"
    [ 46.070] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
    [ 46.070] (--) evdev: 1.3M HD WebCam: Found keys
    [ 46.070] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
    [ 46.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event6"
    [ 46.070] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
    [ 46.070] (**) Option "xkb_rules" "evdev"
    [ 46.070] (**) Option "xkb_model" "pc104"
    [ 46.070] (**) Option "xkb_layout" "us"
    [ 46.071] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 46.071] (II) No input driver specified, ignoring this device.
    [ 46.071] (II) This device may have been added with another device file.
    [ 46.072] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
    [ 46.072] (II) No input driver specified, ignoring this device.
    [ 46.072] (II) This device may have been added with another device file.
    [ 46.072] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
    [ 46.072] (II) No input driver specified, ignoring this device.
    [ 46.072] (II) This device may have been added with another device file.
    [ 46.073] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
    [ 46.073] (II) No input driver specified, ignoring this device.
    [ 46.073] (II) This device may have been added with another device file.
    [ 46.073] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 46.073] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 46.073] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 46.074] (**) AT Translated Set 2 keyboard: always reports core events
    [ 46.074] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 46.074] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 46.074] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 46.074] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 46.074] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 46.074] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 46.074] (**) Option "xkb_rules" "evdev"
    [ 46.074] (**) Option "xkb_model" "pc104"
    [ 46.074] (**) Option "xkb_layout" "us"
    [ 46.075] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
    [ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 46.075] (II) LoadModule: "synaptics"
    [ 46.075] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 46.092] (II) Module synaptics: vendor="X.Org Foundation"
    [ 46.092] compiled for 1.15.0, module version = 1.7.4
    [ 46.092] Module class: X.Org XInput Driver
    [ 46.092] ABI class: X.Org XInput driver, version 20.0
    [ 46.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 46.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 46.092] (**) Option "Device" "/dev/input/event15"
    [ 46.250] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
    [ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
    [ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 46.250] (**) Option "TapButton1" "1"
    [ 46.250] (**) Option "TapButton2" "2"
    [ 46.250] (**) Option "TapButton3" "3"
    [ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 46.250] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 46.316] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
    [ 46.316] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
    [ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 46.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 46.318] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 46.318] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 46.319] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 46.319] (II) No input driver specified, ignoring this device.
    [ 46.319] (II) This device may have been added with another device file.
    [ 46.319] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8)
    [ 46.319] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 46.320] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
    [ 46.320] (**) Acer WMI hotkeys: always reports core events
    [ 46.320] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event8"
    [ 46.320] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
    [ 46.320] (--) evdev: Acer WMI hotkeys: Found keys
    [ 46.320] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
    [ 46.320] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
    [ 46.320] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
    [ 46.320] (**) Option "xkb_rules" "evdev"
    [ 46.320] (**) Option "xkb_model" "pc104"
    [ 46.320] (**) Option "xkb_layout" "us"
    [ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event9)
    [ 46.321] (II) No input driver specified, ignoring this device.
    [ 46.321] (II) This device may have been added with another device file.
    [ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
    [ 46.321] (II) No input driver specified, ignoring this device.
    [ 46.321] (II) This device may have been added with another device file.
    [ 57.547] (II) evdev: Acer WMI hotkeys: Close
    [ 57.547] (II) UnloadModule: "evdev"
    [ 57.547] (II) UnloadModule: "synaptics"
    [ 57.547] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 57.547] (II) UnloadModule: "evdev"
    [ 57.548] (II) evdev: 1.3M HD WebCam: Close
    [ 57.548] (II) UnloadModule: "evdev"
    [ 57.548] (II) evdev: Video Bus: Close
    [ 57.548] (II) UnloadModule: "evdev"
    [ 57.548] (II) evdev: Sleep Button: Close
    [ 57.548] (II) UnloadModule: "evdev"
    [ 57.548] (II) evdev: Power Button: Close
    [ 57.548] (II) UnloadModule: "evdev"
    [ 57.548] (II) evdev: Video Bus: Close
    [ 57.548] (II) UnloadModule: "evdev"
    [ 57.548] (II) evdev: Power Button: Close
    [ 57.548] (II) UnloadModule: "evdev"
    [ 57.580] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 57.589] (EE) Server terminated successfully (0). Closing log file.
    Last edited by hozturk0327 (2014-04-28 14:32:36)

    I realized that instead of this
    xrandr --setprovideroutputsource modesetting NVIDIA-0
    xrandr --auto
    i used
    xrandr --setprovideroutputsource NVIDIA-0
    xrandr --auto
    Now it is fixed.
    And sorry Kartious i thought i uploaded ~/.xinitrc.
    EDIT:
    uname -a outputs
    Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08: CEST 2014 i686 GNU/Linux
    Also this is the new Xorg.0.log
    [ 17.166]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 17.166] X Protocol Version 11, Revision 0
    [ 17.166] Build Operating System: Linux 3.14.0-4-ARCH i686
    [ 17.167] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
    [ 17.167] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
    [ 17.167] Build Date: 14 April 2014 08:41:02AM
    [ 17.167]
    [ 17.167] Current version of pixman: 0.32.4
    [ 17.167] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 17.167] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW.) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 17.168] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 16:45:17 2014
    [ 17.210] (==) Using config file: "/etc/X11/xorg.conf"
    [ 17.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 17.246] (==) ServerLayout "layout"
    [ 17.246] (**) |-->Screen "nvidia" (0)
    [ 17.246] (**) | |-->Monitor "<default monitor>"
    [ 17.247] (**) | |-->Device "nvidia"
    [ 17.247] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
    [ 17.247] (**) |-->Inactive Device "intel"
    [ 17.247] (==) Automatically adding devices
    [ 17.247] (==) Automatically enabling devices
    [ 17.247] (==) Automatically adding GPU devices
    [ 17.290] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 17.291] Entry deleted from font path.
    [ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 17.292] Entry deleted from font path.
    [ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 17.292] Entry deleted from font path.
    [ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 17.292] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 17.292] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 17.292] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 17.293] (II) Loader magic: 0x8264660
    [ 17.293] (II) Module ABI versions:
    [ 17.293] X.Org ANSI C Emulation: 0.4
    [ 17.293] X.Org Video Driver: 15.0
    [ 17.293] X.Org XInput driver : 20.0
    [ 17.293] X.Org Server Extension : 8.0
    [ 17.293] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 17.294] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 17.297] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
    [ 17.297] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 17.297] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 17.298] Initializing built-in extension Generic Event Extension
    [ 17.298] Initializing built-in extension SHAPE
    [ 17.298] Initializing built-in extension MIT-SHM
    [ 17.298] Initializing built-in extension XInputExtension
    [ 17.299] Initializing built-in extension XTEST
    [ 17.299] Initializing built-in extension BIG-REQUESTS
    [ 17.299] Initializing built-in extension SYNC
    [ 17.299] Initializing built-in extension XKEYBOARD
    [ 17.299] Initializing built-in extension XC-MISC
    [ 17.299] Initializing built-in extension SECURITY
    [ 17.299] Initializing built-in extension XINERAMA
    [ 17.299] Initializing built-in extension XFIXES
    [ 17.299] Initializing built-in extension RENDER
    [ 17.299] Initializing built-in extension RANDR
    [ 17.300] Initializing built-in extension COMPOSITE
    [ 17.300] Initializing built-in extension DAMAGE
    [ 17.300] Initializing built-in extension MIT-SCREEN-SAVER
    [ 17.300] Initializing built-in extension DOUBLE-BUFFER
    [ 17.300] Initializing built-in extension RECORD
    [ 17.300] Initializing built-in extension DPMS
    [ 17.300] Initializing built-in extension Present
    [ 17.302] Initializing built-in extension DRI3
    [ 17.305] Initializing built-in extension X-Resource
    [ 17.307] Initializing built-in extension XVideo
    [ 17.309] Initializing built-in extension XVideo-MotionCompensation
    [ 17.311] Initializing built-in extension XFree86-VidModeExtension
    [ 17.313] Initializing built-in extension XFree86-DGA
    [ 17.314] Initializing built-in extension XFree86-DRI
    [ 17.316] Initializing built-in extension DRI2
    [ 17.316] (II) LoadModule: "glx"
    [ 17.331] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 18.139] (II) Module glx: vendor="NVIDIA Corporation"
    [ 18.139] compiled for 4.0.2, module version = 1.0.0
    [ 18.139] Module class: X.Org Server Extension
    [ 18.139] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
    [ 18.141] Loading extension GLX
    [ 18.141] (II) LoadModule: "nvidia"
    [ 18.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 18.207] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 18.207] compiled for 4.0.2, module version = 1.0.0
    [ 18.207] Module class: X.Org Video Driver
    [ 18.217] (II) LoadModule: "modesetting"
    [ 18.217] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 18.223] (II) Module modesetting: vendor="X.Org Foundation"
    [ 18.223] compiled for 1.15.0, module version = 0.8.1
    [ 18.223] Module class: X.Org Video Driver
    [ 18.223] ABI class: X.Org Video Driver, version 15.0
    [ 18.224] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
    [ 18.224] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 18.225] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 18.225] (++) using VT number 1
    [ 18.227] (II) Loading sub module "fb"
    [ 18.227] (II) LoadModule: "fb"
    [ 18.227] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 18.234] (II) Module fb: vendor="X.Org Foundation"
    [ 18.234] compiled for 1.15.1, module version = 1.0.0
    [ 18.234] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 18.234] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 18.234] (II) Loading sub module "wfb"
    [ 18.234] (II) LoadModule: "wfb"
    [ 18.235] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 18.237] (II) Module wfb: vendor="X.Org Foundation"
    [ 18.237] compiled for 1.15.1, module version = 1.0.0
    [ 18.237] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 18.237] (II) Loading sub module "ramdac"
    [ 18.237] (II) LoadModule: "ramdac"
    [ 18.237] (II) Module "ramdac" already built-in
    [ 18.240] (II) modesetting(1): using drv /dev/dri/card0
    [ 18.240] (II) modesetting(G0): using drv /dev/dri/card0
    [ 18.240] (EE) Screen 1 deleted because of no matching config section.
    [ 18.240] (II) UnloadModule: "modesetting"
    [ 18.240] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "nvidia" for depth/fbbpp 24/32
    [ 18.240] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 18.240] (==) NVIDIA(0): RGB weight 888
    [ 18.240] (==) NVIDIA(0): Default visual is TrueColor
    [ 18.240] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 18.241] (**) NVIDIA(0): Enabling 2D acceleration
    [ 24.989] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 24.989] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 24.992] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
    [ 24.992] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 24.992] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
    [ 24.992] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 24.997] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
    [ 24.997] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 24.997] (--) NVIDIA(0): DFP-0
    [ 24.997] (--) NVIDIA(0): DFP-1
    [ 24.997] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 24.997] (--) NVIDIA(0): DFP-0: Internal LVDS
    [ 24.997] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
    [ 24.997] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 24.997] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 24.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 24.997] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 24.997] (**) NVIDIA(0): all display devices.)
    [ 25.000] (==) NVIDIA(0):
    [ 25.000] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 25.000] (==) NVIDIA(0): will be used as the requested mode.
    [ 25.000] (==) NVIDIA(0):
    [ 25.001] (II) NVIDIA(0): Validated MetaModes:
    [ 25.001] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 25.001] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 25.006] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 25.006] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 25.006] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 25.006] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
    [ 25.006] (==) modesetting(G0): RGB weight 888
    [ 25.006] (==) modesetting(G0): Default visual is TrueColor
    [ 25.006] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
    [ 25.006] (II) modesetting(G0): Output LVDS-1-0 has no monitor section
    [ 25.008] (II) modesetting(G0): Output VGA-1-0 has no monitor section
    [ 25.009] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 25.009] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
    [ 25.009] (II) modesetting(G0): EDID for output LVDS-1-0
    [ 25.009] (II) modesetting(G0): Manufacturer: AUO Model: 22ec Serial#: 0
    [ 25.009] (II) modesetting(G0): Year: 2009 Week: 1
    [ 25.009] (II) modesetting(G0): EDID Version: 1.3
    [ 25.009] (II) modesetting(G0): Digital Display Input
    [ 25.009] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 25.009] (II) modesetting(G0): Gamma: 2.20
    [ 25.009] (II) modesetting(G0): No DPMS capabilities specified
    [ 25.009] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 25.009] (II) modesetting(G0): First detailed timing is preferred mode
    [ 25.009] (II) modesetting(G0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
    [ 25.009] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 25.009] (II) modesetting(G0): Manufacturer's mask: 0
    [ 25.009] (II) modesetting(G0): Supported detailed timing:
    [ 25.009] (II) modesetting(G0): clock: 69.3 MHz Image Size: 344 x 193 mm
    [ 25.009] (II) modesetting(G0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
    [ 25.009] (II) modesetting(G0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
    [ 25.009] (II) modesetting(G0): Unknown vendor-specific block f
    [ 25.009] (II) modesetting(G0): AUO
    [ 25.009] (II) modesetting(G0): B156XW02 V2
    [ 25.009] (II) modesetting(G0): EDID (in hex):
    [ 25.009] (II) modesetting(G0): 00ffffffffffff0006afec2200000000
    [ 25.009] (II) modesetting(G0): 01130103802213780ac8959e57549226
    [ 25.009] (II) modesetting(G0): 0f505400000001010101010101010101
    [ 25.009] (II) modesetting(G0): 010101010101121b5642500026302018
    [ 25.009] (II) modesetting(G0): 340058c1100000180000000f00000000
    [ 25.009] (II) modesetting(G0): 00000000000000000020000000fe0041
    [ 25.009] (II) modesetting(G0): 554f0a202020202020202020000000fe
    [ 25.009] (II) modesetting(G0): 004231353658573032205632200a00c0
    [ 25.009] (II) modesetting(G0): Printing probed modes for output LVDS-1-0
    [ 25.009] (II) modesetting(G0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
    [ 25.009] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 25.009] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 25.010] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 25.010] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 25.010] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 25.010] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 25.010] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 25.010] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 25.011] (II) modesetting(G0): EDID for output VGA-1-0
    [ 25.011] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 25.011] (II) modesetting(G0): EDID for output DisplayPort-1-0
    [ 25.011] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 25.011] (==) modesetting(G0): DPI set to (96, 96)
    [ 25.011] (II) Loading sub module "fb"
    [ 25.012] (II) LoadModule: "fb"
    [ 25.012] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 25.012] (II) Module fb: vendor="X.Org Foundation"
    [ 25.012] compiled for 1.15.1, module version = 1.0.0
    [ 25.012] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 25.012] (II) Loading sub module "shadow"
    [ 25.012] (II) LoadModule: "shadow"
    [ 25.012] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 25.022] (II) Module shadow: vendor="X.Org Foundation"
    [ 25.022] compiled for 1.15.1, module version = 1.1.0
    [ 25.023] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 25.023] (--) Depth 24 pixmap format is 32 bpp
    [ 25.033] (==) modesetting(G0): Backing store enabled
    [ 25.033] (==) modesetting(G0): Silken mouse enabled
    [ 25.033] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 25.034] (==) modesetting(G0): DPMS enabled
    [ 25.334] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
    [ 25.334] (II) NVIDIA: access.
    [ 25.553] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 25.627] Loading extension NV-GLX
    [ 25.723] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 25.723] (==) NVIDIA(0): Backing store enabled
    [ 25.723] (==) NVIDIA(0): Silken mouse enabled
    [ 25.724] (==) NVIDIA(0): DPMS enabled
    [ 25.724] Loading extension NV-CONTROL
    [ 25.724] Loading extension XINERAMA
    [ 25.724] (II) Loading sub module "dri2"
    [ 25.724] (II) LoadModule: "dri2"
    [ 25.724] (II) Module "dri2" already built-in
    [ 25.724] (II) NVIDIA(0): [DRI2] Setup complete
    [ 25.724] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 25.725] (--) RandR disabled
    [ 25.756] (II) Initializing extension GLX
    [ 25.760] (II) modesetting(G0): Damage tracking initialized
    [ 26.052] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 26.052] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 26.052] (II) LoadModule: "evdev"
    [ 26.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 26.081] (II) Module evdev: vendor="X.Org Foundation"
    [ 26.081] compiled for 1.15.0, module version = 2.8.2
    [ 26.081] Module class: X.Org XInput Driver
    [ 26.081] ABI class: X.Org XInput driver, version 20.0
    [ 26.081] (II) Using input driver 'evdev' for 'Power Button'
    [ 26.081] (**) Power Button: always reports core events
    [ 26.081] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 26.081] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 26.081] (--) evdev: Power Button: Found keys
    [ 26.081] (II) evdev: Power Button: Configuring as keyboard
    [ 26.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
    [ 26.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 26.081] (**) Option "xkb_rules" "evdev"
    [ 26.081] (**) Option "xkb_model" "pc104"
    [ 26.081] (**) Option "xkb_layout" "us"
    [ 26.136] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 26.136] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 26.136] (II) Using input driver 'evdev' for 'Video Bus'
    [ 26.136] (**) Video Bus: always reports core events
    [ 26.136] (**) evdev: Video Bus: Device: "/dev/input/event13"
    [ 26.136] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 26.136] (--) evdev: Video Bus: Found keys
    [ 26.136] (II) evdev: Video Bus: Configuring as keyboard
    [ 26.136] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
    [ 26.136] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 26.136] (**) Option "xkb_rules" "evdev"
    [ 26.136] (**) Option "xkb_model" "pc104"
    [ 26.136] (**) Option "xkb_layout" "us"
    [ 26.137] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 26.137] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 26.137] (II) Using input driver 'evdev' for 'Power Button'
    [ 26.137] (**) Power Button: always reports core events
    [ 26.137] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 26.138] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 26.138] (--) evdev: Power Button: Found keys
    [ 26.138] (II) evdev: Power Button: Configuring as keyboard
    [ 26.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
    [ 26.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 26.138] (**) Option "xkb_rules" "evdev"
    [ 26.138] (**) Option "xkb_model" "pc104"
    [ 26.138] (**) Option "xkb_layout" "us"
    [ 26.139] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 26.139] (II) No input driver specified, ignoring this device.
    [ 26.139] (II) This device may have been added with another device file.
    [ 26.139] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 26.139] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 26.139] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 26.140] (**) Sleep Button: always reports core events
    [ 26.140] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 26.140] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 26.140] (--) evdev: Sleep Button: Found keys
    [ 26.140] (II) evdev: Sleep Button: Configuring as keyboard
    [ 26.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
    [ 26.140] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 26.140] (**) Option "xkb_rules" "evdev"
    [ 26.140] (**) Option "xkb_model" "pc104"
    [ 26.140] (**) Option "xkb_layout" "us"
    [ 26.141] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 26.141] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 26.141] (II) Using input driver 'evdev' for 'Video Bus'
    [ 26.141] (**) Video Bus: always reports core events
    [ 26.141] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 26.141] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 26.141] (--) evdev: Video Bus: Found keys
    [ 26.141] (II) evdev: Video Bus: Configuring as keyboard
    [ 26.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
    [ 26.141] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
    [ 26.141] (**) Option "xkb_rules" "evdev"
    [ 26.141] (**) Option "xkb_model" "pc104"
    [ 26.141] (**) Option "xkb_layout" "us"
    [ 26.142] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 26.142] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 26.143] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event8)
    [ 26.143] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
    [ 26.143] (II) Using input driver 'evdev' for '1.3M HD WebCam'
    [ 26.143] (**) 1.3M HD WebCam: always reports core events
    [ 26.143] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event8"
    [ 26.143] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
    [ 26.143] (--) evdev: 1.3M HD WebCam: Found keys
    [ 26.143] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
    [ 26.143] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event8"
    [ 26.143] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
    [ 26.143] (**) Option "xkb_rules" "evdev"
    [ 26.143] (**) Option "xkb_model" "pc104"
    [ 26.143] (**) Option "xkb_layout" "us"
    [ 26.144] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
    [ 26.144] (II) No input driver specified, ignoring this device.
    [ 26.144] (II) This device may have been added with another device file.
    [ 26.145] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
    [ 26.145] (II) No input driver specified, ignoring this device.
    [ 26.145] (II) This device may have been added with another device file.
    [ 26.145] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
    [ 26.145] (II) No input driver specified, ignoring this device.
    [ 26.146] (II) This device may have been added with another device file.
    [ 26.146] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
    [ 26.146] (II) No input driver specified, ignoring this device.
    [ 26.146] (II) This device may have been added with another device file.
    [ 26.147] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 26.147] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 26.147] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 26.147] (**) AT Translated Set 2 keyboard: always reports core events
    [ 26.147] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 26.147] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 26.147] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 26.147] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 26.147] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 26.147] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 26.147] (**) Option "xkb_rules" "evdev"
    [ 26.147] (**) Option "xkb_model" "pc104"
    [ 26.147] (**) Option "xkb_layout" "us"
    [ 26.148] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
    [ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 26.148] (II) LoadModule: "synaptics"
    [ 26.148] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 26.158] (II) Module synaptics: vendor="X.Org Foundation"
    [ 26.158] compiled for 1.15.0, module version = 1.7.4
    [ 26.158] Module class: X.Org XInput Driver
    [ 26.158] ABI class: X.Org XInput driver, version 20.0
    [ 26.158] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 26.158] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 26.158] (**) Option "Device" "/dev/input/event15"
    [ 26.316] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
    [ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
    [ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 26.317] (**) Option "TapButton1" "1"
    [ 26.317] (**) Option "TapButton2" "2"
    [ 26.317] (**) Option "TapButton3" "3"
    [ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 26.317] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 26.370] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event15"
    [ 26.370] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
    [ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 26.371] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 26.371] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 26.371] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 26.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 26.372] (II) No input driver specified, ignoring this device.
    [ 26.372] (II) This device may have been added with another device file.
    [ 26.373] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
    [ 26.373] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 26.373] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
    [ 26.373] (**) Acer WMI hotkeys: always reports core events
    [ 26.373] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
    [ 26.373] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
    [ 26.373] (--) evdev: Acer WMI hotkeys: Found keys
    [ 26.373] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
    [ 26.373] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
    [ 26.373] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
    [ 26.373] (**) Option "xkb_rules" "evdev"
    [ 26.373] (**) Option "xkb_model" "pc104"
    [ 26.373] (**) Option "xkb_layout" "us"
    [ 26.374] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
    [ 26.374] (II) No input driver specified, ignoring this device.
    [ 26.374] (II) This device may have been added with another device file.
    [ 26.375] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
    [ 26.375] (II) No input driver specified, ignoring this device.
    [ 26.375] (II) This device may have been added with another device file.
    [ 26.489] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 26.507] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 26.573] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 27.186] (II) evdev: Acer WMI hotkeys: Close
    [ 27.186] (II) UnloadModule: "evdev"
    [ 27.187] (II) UnloadModule: "synaptics"
    [ 27.187] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 27.187] (II) UnloadModule: "evdev"
    [ 27.187] (II) evdev: 1.3M HD WebCam: Close
    [ 27.187] (II) UnloadModule: "evdev"
    [ 27.187] (II) evdev: Video Bus: Close
    [ 27.187] (II) UnloadModule: "evdev"
    [ 27.187] (II) evdev: Sleep Button: Close
    [ 27.187] (II) UnloadModule: "evdev"
    [ 27.187] (II) evdev: Power Button: Close
    [ 27.187] (II) UnloadModule: "evdev"
    [ 27.187] (II) evdev: Video Bus: Close
    [ 27.187] (II) UnloadModule: "evdev"
    [ 27.187] (II) evdev: Power Button: Close
    [ 27.187] (II) UnloadModule: "evdev"
    [ 27.254] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 27.404] (EE) Server terminated successfully (0). Closing log file.
    It is still not working.
    Last edited by hozturk0327 (2014-04-28 14:08:41)

  • [Bumblebee]Failed to initialize the NVIDIA GPU at PCI:1:0:0.

    Hi!
    I've instaled Arch about a month ago and now wanted to check my nvidia card using Bumblebee, but have some errors…
    [wicu@arch:~]$ optirun -vv minecraft
    [ 4859.259278] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 4859.404191] [DEBUG]optirun version 3.0.1 starting...
    [ 4859.404220] [DEBUG]Active configuration:
    [ 4859.404226] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 4859.404242] [DEBUG] X display: :8
    [ 4859.404254] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
    [ 4859.404265] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 4859.404276] [DEBUG] VGL Compression: proxy
    [ 4859.536971] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.537027] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.537053] [DEBUG]Socket closed.
    [ 4859.537086] [ERROR]Aborting because fallback start is disabled.
    [ 4859.537094] [DEBUG]Killing all remaining processes.
    [wicu@arch:~]$ sudo journalctl // here is only part when I tried use bumblebee
    Nov 26 17:48:43 arch kernel: NVRM: failed to copy vbios to system memory.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238670] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238729] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238765] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238819] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238826] [ERROR][XORG] (EE) NVIDIA(0): check your system's kernel log for additional error
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238830] [ERROR][XORG] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238835] [ERROR][XORG] (EE) NVIDIA(0): README for additional information.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238841] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238847] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238853] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238858] [ERROR][XORG] (EE)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238863] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238868] [ERROR][XORG] (EE)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238873] [ERROR]X did not start properly
    Nov 26 17:48:43 arch kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:739)
    Nov 26 17:48:43 arch kernel: NVRM: rm_init_adapter(0) failed
    // xorg log
    [ 4859.510]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 4859.511] X Protocol Version 11, Revision 0
    [ 4859.511] Build Operating System: Linux 3.6.3-1-ARCH x86_64
    [ 4859.511] Current Operating System: Linux arch 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
    [ 4859.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70a6cff9-bcf7-42eb-9ba1-73953e023617 ro quiet
    [ 4859.511] Build Date: 08 November 2012 07:09:29PM
    [ 4859.511]
    [ 4859.511] Current version of pixman: 0.28.0
    [ 4859.511] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4859.511] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4859.511] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 26 18:00:43 2012
    [ 4859.511] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 4859.511] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4859.511] (==) ServerLayout "Layout0"
    [ 4859.512] (==) No screen section available. Using defaults.
    [ 4859.512] (**) |-->Screen "Default Screen Section" (0)
    [ 4859.512] (**) | |-->Monitor "<default monitor>"
    [ 4859.512] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 4859.512] (**) | |-->Device "Device1"
    [ 4859.512] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4859.512] (**) Option "AutoAddDevices" "false"
    [ 4859.512] (**) Not automatically adding devices
    [ 4859.512] (==) Automatically enabling devices
    [ 4859.512] (==) Automatically adding GPU devices
    [ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4859.512] Entry deleted from font path.
    [ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4859.512] Entry deleted from font path.
    [ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4859.512] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 4859.512] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
    [ 4859.512] (==) |-->Input Device "<default pointer>"
    [ 4859.512] (==) |-->Input Device "<default keyboard>"
    [ 4859.512] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 4859.512] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 4859.512] (II) Loader magic: 0x7fcc40
    [ 4859.512] (II) Module ABI versions:
    [ 4859.512] X.Org ANSI C Emulation: 0.4
    [ 4859.513] X.Org Video Driver: 13.1
    [ 4859.513] X.Org XInput driver : 18.0
    [ 4859.513] X.Org Server Extension : 7.0
    [ 4859.513] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4859.513] setversion 1.4 failed
    [ 4859.516] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
    [ 4859.516] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4859.516] Initializing built-in extension Generic Event Extension
    [ 4859.516] Initializing built-in extension SHAPE
    [ 4859.516] Initializing built-in extension MIT-SHM
    [ 4859.516] Initializing built-in extension XInputExtension
    [ 4859.516] Initializing built-in extension XTEST
    [ 4859.516] Initializing built-in extension BIG-REQUESTS
    [ 4859.516] Initializing built-in extension SYNC
    [ 4859.516] Initializing built-in extension XKEYBOARD
    [ 4859.516] Initializing built-in extension XC-MISC
    [ 4859.516] Initializing built-in extension SECURITY
    [ 4859.516] Initializing built-in extension XINERAMA
    [ 4859.516] Initializing built-in extension XFIXES
    [ 4859.516] Initializing built-in extension RENDER
    [ 4859.516] Initializing built-in extension RANDR
    [ 4859.516] Initializing built-in extension COMPOSITE
    [ 4859.516] Initializing built-in extension DAMAGE
    [ 4859.516] Initializing built-in extension MIT-SCREEN-SAVER
    [ 4859.516] Initializing built-in extension DOUBLE-BUFFER
    [ 4859.516] Initializing built-in extension RECORD
    [ 4859.516] Initializing built-in extension DPMS
    [ 4859.516] Initializing built-in extension X-Resource
    [ 4859.516] Initializing built-in extension XVideo
    [ 4859.516] Initializing built-in extension XVideo-MotionCompensation
    [ 4859.516] Initializing built-in extension XFree86-VidModeExtension
    [ 4859.516] Initializing built-in extension XFree86-DGA
    [ 4859.516] Initializing built-in extension XFree86-DRI
    [ 4859.516] Initializing built-in extension DRI2
    [ 4859.516] (II) LoadModule: "glx"
    [ 4859.516] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
    [ 4859.526] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4859.526] compiled for 4.0.2, module version = 1.0.0
    [ 4859.526] Module class: X.Org Server Extension
    [ 4859.526] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
    [ 4859.526] Loading extension GLX
    [ 4859.526] (II) LoadModule: "nvidia"
    [ 4859.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4859.526] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4859.526] compiled for 4.0.2, module version = 1.0.0
    [ 4859.526] Module class: X.Org Video Driver
    [ 4859.526] (II) LoadModule: "mouse"
    [ 4859.527] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 4859.527] (II) Module mouse: vendor="X.Org Foundation"
    [ 4859.527] compiled for 1.13.0, module version = 1.8.1
    [ 4859.527] Module class: X.Org XInput Driver
    [ 4859.527] ABI class: X.Org XInput driver, version 18.0
    [ 4859.527] (II) LoadModule: "kbd"
    [ 4859.527] (WW) Warning, couldn't open module kbd
    [ 4859.527] (II) UnloadModule: "kbd"
    [ 4859.527] (II) Unloading kbd
    [ 4859.527] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 4859.527] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
    [ 4859.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4859.527] (--) using VT number 7
    [ 4859.527] (II) Loading sub module "wfb"
    [ 4859.527] (II) LoadModule: "wfb"
    [ 4859.527] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4859.527] (II) Module wfb: vendor="X.Org Foundation"
    [ 4859.527] compiled for 1.13.0, module version = 1.0.0
    [ 4859.527] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4859.527] (II) Loading sub module "ramdac"
    [ 4859.527] (II) LoadModule: "ramdac"
    [ 4859.527] (II) Module "ramdac" already built-in
    [ 4859.527] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4859.527] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4859.527] (==) NVIDIA(0): RGB weight 888
    [ 4859.527] (==) NVIDIA(0): Default visual is TrueColor
    [ 4859.527] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4859.527] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 4859.528] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 4859.528] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
    [ 4859.528] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4859.528] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
    [ 4859.528] (**) NVIDIA(0): Ignoring EDIDs
    [ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.534] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 4859.534] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 4859.534] (EE) NVIDIA(0): README for additional information.
    [ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 4859.534] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 4859.534] (II) UnloadModule: "nvidia"
    [ 4859.534] (II) UnloadSubModule: "wfb"
    [ 4859.534] (EE) Screen(s) found, but none have a usable configuration.
    [ 4859.534]
    Fatal server error:
    [ 4859.534] no screens found
    [ 4859.534] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 4859.534] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 4859.534] (EE)
    [ 4859.534] Server terminated with error (1). Closing log file.
    [wicu@arch:~]$ lspci | grep VGA
    3:00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    14:01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
    [wicu@arch:~]$ primusrun minecraft
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    asdf
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    27 achievements
    208 recipes
    Setting user: Druedain, -4246576297828159265
    primus: fatal: failure contacting bumblebee daemon
    [18:05:39 - wicu@arch:~]$ primusrun minecraft
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    asdf
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    27 achievements
    208 recipes
    Setting user: Druedain, -7896572405277476304
    primus: fatal: failure contacting bumblebee daemon
    [wicu@arch:~]$ systemctl | grep bumblebee
    35:bumblebeed.service

    [wicu@arch:~]$ dmesg | grep nvidia
    782:[ 6.776816] nvidia: module license 'NVIDIA' taints kernel.
    784:[ 6.784411] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [wicu@arch:~]$ cat /etc/bumblebee/bumblebee.conf
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    Module=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    [wicu@arch:~]$ cat /etc/bumblebee/xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "ConnectedMonitor" "DFP"
    EndSection

  • I bought in december of 2008 a 2.4ghz macbook pro and I think the gpu is starting to fail. Can I still be covered for a change because of the faulty nvidia gpu?

    I bought in december of 2008 a 2.4ghz macbook pro and I think the gpu is starting to fail. Can I still be covered for a change because of the faulty nvidia gpu?

    If your computer qualifies - MacBook Pro: Distorted video or no video issues  
    If it does, call Apple Customer Relations or print out a copy of the article and bring it in to the repair shop. 

  • HOWTO: Can't display any resolution above 640x480, or other crappy res

    I've been working on this problem for half the day, and finally figured it out after many hours of frustration. During my search for a solution, I've seen other people who had the same problem but was never resolved on these forums. Rather than bumping an old post, I've decided to create this "howto" hoping that someone experiencing the same problem may find this post.
    The problem is that Xorg refuses to display any resolution above the minimum, which is 640x480. This was the resolution in my case, and searching around, it's the resolution many other people experienced, as well, who experienced this same problem.
    Check your Xorg log in /var/log/Xorg.0.log . Search for "No valid modes for". If you see something like this, then you are experiencing the same problem I had:
    (WW) NVIDIA(0): No valid modes for "1680x1050"; removing.
    (WW) NVIDIA(0): No valid modes for "1024x768"; removing.
    (WW) NVIDIA(0): No valid modes for "800x600"; removing.
    (WW) NVIDIA(0): No valid modes for "640x480"; removing.
    (WW) NVIDIA(0):
    (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
    (WW) NVIDIA(0): "nvidia-auto-select".
    (WW) NVIDIA(0):
    In my case, this only occurred when I was using the nvidia driver (it went away when I just used nv).
    Ok, so here's how to solve the problem...
    Has your monitor worked with your machine before?
    If your monitor, graphics card, etc. has worked with your machine and xorg file in the past, and it suddenly stopped working without anything changing, then try rebooting your monitor. (I'm serious!) Log out, turn off your monitor, and unplug it for several seconds. Plug it back in and log back in. This ended up solving my problem, after I edited my xorg file (see below)... but just editing the xorg file and rebooting X wasn't enough
    If monitor rebooting didn't help, or you've never got your monitor/graphics card/xorg.conf working together in the past
    If this is the case, your xorg.conf probably isn't configured correctly. Assuming you already have a xorg.conf file (this post is NOT meant to replace the other howto's on how to configure your xorg file), here's the basic rundown of what your xorg file should have...
    Make sure that you have the "Modes" set in your Display subsection of Screen. Here's what my Screen section looks like:
    Section "Screen"
        Identifier     "Screen0"
        Device         "Card0"
        Monitor        "Monitor0"
        DefaultDepth   24
        SubSection     "Display"
            Depth      16
            Modes      "1680x1050" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection     "Display"
            Depth      24
            Modes      "1680x1050" "1024x768" "800x600" "640x480"
        EndSubSection
    EndSection
    (the line(s) in bold are the ones you need to make sure you have)
    If this still doesn't work, make sure that you have the appropriate Modeline set. I chose to make a Modes section like this:
    Section "Modes"
        Identifier  "16:10"
        Modeline    "1680x1050 (GTF)" 154.20 1680 1712 2296 2328 1050 1071 1081 1103
    EndSection
    Your Modeline probably won't look like mine. Hopefully, you know the specs of your monitor (or can look them up). You can use this tool to generate the Modeline for you:
    http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
    Finally, make sure that the Monitor section includes your HorizSync and VertRefresh options. These are values specific to your monitor (again, you'll need to look up your monitor's specs)
    Here's my Monitor section
    Section "Monitor"
        Identifier      "Generic Monitor"
        HorizSync       30-83
        VertRefresh     60
        Option          "DPMS"
        UseModes        "16:10"
    EndSection
    Log out and log back in. If the problem persists, reboot your monitor as described above.
    I hope this post will help someone, someday!

    Hi-
    You can plug a DVI-I dual link female into the DVI-I single male on a graphics card.
    From the outside, the male has all the holes for all the pins on the DVI dual, there are just no wires attached to the center group of the DVI single male.
    The Radeon 9800 is a DVI-I single link card. There is no getting around it.
    The maximum supported digital resolution for a Radeon 9800 is 1920x1200:
    http://ati.amd.com/products/radeon9800/radeon9800prome/specs.html
    This said, the 30" Cinema Display requires a dual link DVI connection, as equipped on the graphics cards, as listed, in Malcolm's post above.
    G4 AGP(450)Sawtooth   Mac OS X (10.4.8)   2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

  • Qosmio X870-116: usage of Intel / nVidia GPU on internal / external display

    Hello,
    I have a Qosmio X870-116 which have 2 video cards, a Intel on board and a Nvidia more powerfull.
    My probleme, I don't how I switch my display on the Intel card and I see my Nvidia only for the external display.
    Some one have an idea to switch on the nvidia card to my first display?
    Thanks

    Hi
    Something like that isnt possible.
    You cannot use two graphic cards simultaneously for internal and external display.
    First of all you can switch between external and internal display using the function key Fn + F4 (or just F4)
    Secondly the nVidia Optimus technology optimize notebook performance by seamlessly switching between a nVidia GPU and Intel internal graphic card.
    The switching is automatic and does not require any notebooks reboot.

Maybe you are looking for

  • Change of count on the header on filtering the ALV

    Hi Gurus! I have this ALV report which gives the sales order report, in the output right on the top the report shows the count of all the distinct sales order displayed when the report is run based ona  selection criteria. Is it possible to show the

  • Can't open keychain after update to 10.9.5

    After i update to Mac OS 10.9.5, i find out that some of the program in Utilities; can't open it; such as Bluetooth File Exchange, Boot Camp Assistant, Console, Keychain Access, System Information and VoiceOver Utility. I don't know why this happen.

  • How can I convert my logo 300dpi (274 pixels wide) from EPS to Gif format?

    I have a logo that needs to be fixed for web purposes. It looks great in print but very poor quality on screen. I need one for my website and HTML email newsletters, along with a high quality GIF 300 DPI (274 pixels wide) for a HTML coded signature.

  • Issue related to the Credit memo and S.O.

    Hi, I have one issue related to the Credit memo and S.O. We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inve

  • SQL injection hacks

    Hi, i am a bit disappointed by the ability of cisco IPS to block sql injections, even with the new added generic sql injection signatures not long ago, still websites hosted with us are being hacked. i know its vulnerabilities in the sites, but the c