Any restriction for single SAP instance

Hello All,
One of the vendor advised  to run CI only for a VCM application of estimated size of 50000 SAPs, Is it feasible or there is restriction ? And is there any uppler limit for the instance parameters ?
Please advice if anyone have experionce in this.
Thanks & Regards,
Vinod

Hello,
50.000 SAPs for a Central Instance is possible, however this seems a very big system.
Normally you do not include the Central Instance in your logon groups, therefore instance problems should not be sized to big.
What you should have in your landscape is a lot of application servers (in logon group also) to deal with the load the end users will cause.
On your central instance I also assume that your database is running, otherwise 50.000 SAPs is not possible.
CI + DB = 50.000 is possible because you will also have a lot of shadow processes in your DB for every workprocess in the different application servers.
Wim

Similar Messages

  • If there is any restriction for procedure input parameter

    Hello expert,
    I create a oracle precedure, with a input parameter, but when I used this procedure in SAP BO, it showed following error message:
    " a database error occured. the database error text is : cannot parse the stored procedure query: unable to parse stored procedure specification . (WIS 10901)"
    I found if I input a value for this parameter including '&', above error displayed.
    so , will you please tell me if there is any restriction for procedure input parameter?
    Many Thanks,

    843178 wrote:
    I create a oracle precedure, with a input parameter, but when I used this procedure in SAP BO, it showed following error message:
    " a database error occured. the database error text is : cannot parse the stored procedure query: unable to parse stored procedure specification . (WIS 10901)" This is not an Oracle error message. Such a message will have an ORA error code (or PLS code). Neither can stored procedures be executed as queries. They need to be executed via anonymous PL/SQL code blocks.
    So from the sounds of it, the problem in your case is that the PL/SQL procedure call is incorrectly made.
    Calling a PL/SQL procedure needs 2 basic things:
    - make the call code using an anonymous PL/SQL code block
    - use bind variables for passing input and output parameters

  • Where can i find start/stop scripts for all SAP instances

    Hi,
    I installed CI, DB and Dialog instance on a standalone S10 machine and i could see start scripts under /sapmnt/RAM/profile
    START_DVEBMGS09_hostSAP
    START_D24_hostSAP
    But i cann't see stop scripts for the above and also i cann't see start and stop scripts for SAP DB instance. Could some one point me where i can find them when everything is installed on a single box.
    Thanks,
    Ram

    USAGE: STARTSAP.EXE name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
    FURTHER INFORMATION:
    - The executable sapstart.exe must be in the same directory
    when you start sap instacne, it will check db instance first, if db instance not start , it will automatic start db instance then sap instance.
    vice visa :
    stopsap is alos can be used.

  • Any restrictions on # of Workflow / Instances that ALBPM can handle?

    Is there any restrictions on No of workflow/ instances that ALBPM 5.7 can handle in production. I'm not worrying about handling number of simultaneous request but actual number of workflow / instances it can handle in due course.
    Thanks,
    Bharat

    9 pages max

  • Do the fonts in Photoshop CS4 have any restrictions for commercial use?

    I am a  designer and I wanted to know if there were any restrictions in the Photoshop CS4 Extended version concerning font usage?  I have read all the terms but I got confused after awhile.  I wanted to make sure there are no restricted usage if I use any of the fonts incorporated into my designs which are then resold?  Thank you in advance!

    Thank you for your response.  Just to be clear: essentially I can use the fonts in my designs  for say cell phone skins and music album covers but cannot not ( of course) resell the original fonts correct?  Thanks again for your help!  I have tried calling and been on hold forever, then tried emailing support and they said I had to call because it is a  technical issue.  Lawyer speak in the terms confuses me easily:)

  • Multiple SDM for single WAS instance

    Can I have 2 SDM for a single WAS instance ?

    Are you talking about SDM servers or SDM clients? There's no need to have multiple SDM servers for one WebAS server.

  • Is there any restriction for the types of components in a tool bar.

    Hi, i'm using a tool bar where i'm having different command buttons and an "<af:inputFile>" component.
    In one of the command button i'm having "<af:setPropertyListener>" component. This command button is not being used as a partial trigger by any other component. If i invoke this button i'm getting "Assertion failed:Incorrect use of AdfRichUIPeer.GetDomNodeForCommentComponent" error.
    if i remove the either the "<af:inputFile>" or the command button having "<af:setPropertyListener>" from the tool bar then there is no such error.
    is there any restriction to use different components in a tool bar. Please clarify me . Thanks.

    Thanks for your inputs. But non of the component using the attributes "rendered". And non of the components is being partial trigger for other components. Please let me know what else could be the cause. Thanks.

  • Are there any restrictions for using "ø, æ, å" letters?

    My App name is "Loekken". I have native "Løkken" name at description, but I can't find my application by using "Løkken" keyword. Search result doesn't contain my App. What is wrong?

    hi,
    My requirement is to add a tab with 8 additional fields at header & line item levels both in me21n.Since u have already implemented i wuld be very  grateful if u culd give me guidelines as how to proceed & whts steps shuld be followed.this is the first time iam implementing BAdis so your help will be highly appreciated.
    thnx & rgds.
    Ive copied the sample code for badi 'Me_gui_po_cust' in the 'Interface' of BADI.but i cant see anything on screen.
    how the badi will get called when trx ME21n is executed.
    Message was edited by:
            abapuser

  • Restrictions for Unencrypted VLANs in 1200

    Hi,
    Is it possible to set simultaneously two unencrypted (Open/No WEP)VLANs/SSIDs in an AP?
    I have an environment where VLAN 10 is "Open/No WEP" for BBSM authentication, but I also need to create a second "Open VLAN" that will have direct access to the Internet, without BBSM authentication for some specific and provisory situations (this VLAN would not be connected to BBSM).
    Are there any restrictions for that? Is it possible to set two or more unencrypted SSIDs or an "Open/No WEP" SSID and a Guest SSID?
    Rgds

    Hello KaSing,
    Are the following combination of encryption methods compatible on a single Access Point:
    1. LEAP with Broadcast Key Rotation
    2. LEAP with Cisco WPA (CKIP/CMIC)
    3. LEAP with WPA (TKIP/MIC)
    4. Static WEP using any available Key Slot
    The documentation states that you cannot use Broadcast Key Rotation concurrently with Static WEP, since WEP slots 2 and 3 are used by the rotating broadcast keys. It also states that LEAP/EAP uses slot 4.
    If Broadcast Key Rotation uses slot 1 as the transmit "seed" key, permuted in slots 2 and 3, why can't this static key still be used in slot 1 by a static WEP client?
    Does static WEP preclude the use of any other dynamic WEP encryption/cipher? What other encryption scheme can interoperate with static WEP?
    Thanks Dixon!

  • BPM API for interrupt process instance

    Hi,
    I have used the BPM API's to locate the process instance number that I need. How can I use this number to send a message interrupt to the process? (Has a boundary catch message)
    Alex
    Edited by: 931245 on May 15, 2012 10:24 AM

    Hi,
    Thanks for the reply. But my expectation is different. This is getting the component instance id without any argument, for the current instance. But I need to retrieve the Bpel instance based on some arguments, may be using the correlation id / composite sensor attributes / flex fields attributes...

  • Sharing DB server among several SAP instances

    When discussing possible server consolidation scenarios the following question arose:
    Is it possible and supported to use one database server for several SAP instances?
    E.g. One instance of SQL Server holds four databases for "dev" + "test" + "sandbox1" + "sandbox2"
    and four servers (three of them virtual servers in VMware ESX) access this shared DB server to access their databases.
    The idea is to have one heavyweight DB server accessing SAN and running the DB load of several non productive SAP instances. One would have to pay only one SQLServer license...
    Kind regards, Rudi

    Hi Dan,
    The advantages of multiple instances/one database each are:
    - Each instance can be stopped and started independently. This allows you to have downtime on one system without impacting another.
    - Each instance can be patched separately. (This can also be viewed as a disadvantage from an admin overhead point of view)
    - MS SQL memory parameters (min. server memory/max. server memory) are configued at the instance level therefore you can better configure these parameters to meet the specific requirements of the database e.g. R/3, BI, EP. The alternative is one memory setting for all DB types.
    Thanks,
    Chris

  • Service desk for non-sap (please - any inputs are welcome)

    hi all,,
    I know how to setup service desk for SAP use. Can some one provide me some tips on using solution manager - service desk for non-sap as well? eg: the company wants to use service desk for normal activities as well, as laptop not working, server down, other system issues etc.
    The questions I have are -
    1) Any specific structure to be created for the non-sap? The way we use in SAP specific environment is to use "SAP Components" while creating tickets. How can we create tickets for non-sap components? What will be the "responsibility" selection?
    2) How about the Ibase? For SAP, the ibase already have the data from SMSY. How can I get data for non-sap systems? Anything is SAP to keep the Asset management data (like entries of laptops, servers etc)
    Thanks for all the suggestions !!
    JZKALH

    Hi
    You need to go for service desk XT which is the extension of service desk to manage non sap or IT incidents
    Check below link
    https://websmp110.sap-ag.de/_solutionmanager
    Heterogeous system environments are a challenge for IT-service management in any company. The associated complex structures and varying forms of media often make it difficult to realize efficient service processes. With SAP Solution Manager Service Desk - Extended Usage (Service Desk XT), SAP offers a centralized support tool as a single point of access - for service requests and problem tickets related to SAP and non-SAP software.
    The Single Point of Access for Support
    SAP Solution Manager, which is a standard part of every SAP solution and therefore can be used by all SAP customers, supports users in SAP relevant service requests. The standard function of the service desk is restricted to service requests.
    With Service Desk XT, SAP provides an extended support tool, which can be also used for general service requests, for example regarding IT or telecommunication equipment.
    This priced add-on does not require additional interfaces to third-party products - the same service requests are used for SAP and non-SAP applications. This simplification is a benefit for your employees.
    This solution has been created with IT service providers in mind, especially those which work within a company and currently do not have an IT-service desk application in place or would like to replace an existing system.
    Also,
    check this link
    pg(46)
    https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000147532009E
    Pg 52 onwards
    https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000059742008E
    https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000548652007E
    Hope it helps
    Regards
    Prakhar

  • Single Web Dispatcher for Multiple SAP Systems

    Having read a number of posts & S-Notes, I found that Web Dispatcher 7.2 is capable of routing between multiple SAP instances.
    But despite having troubleshooted, I am unable to make it work. I have two separate installations ERP & Portal on the same host, but my web dispatcher only routes to one of them at the same time. Simultaneous access to these 2 systems is not possible either with URL or Port control procedure mentioned at url http://help.sap.com/saphelp_nw72/helpdata/en/c5/ec466f5544409982c7d3ca29ce1ad3/frameset.htm
    Can anyone point an error in my below mentioned configuration of web dispatcher file.
    I want requests on port 8853 of my web-dispatcher to be routed to system DEV &
    the requests on port 8843 of my web-dispatcher to be routed to system DEP
    rdisp/mshost = sapdeverp
    ms/http_port = 8100
    icm/server_port_0 = PROT=HTTP,PORT=8853
    icm/server_port_1 = PROT=HTTP,PORT=8843
    wdisp/system_0 = SID=DEV, MSHOST=sapdeverp, MSPORT=8100, SRCSRV=*:8853
    wdisp/system_1 = SID=DEP, MSHOST=sapdeverp, MSPORT=8102, SRCSRV=*:8843
    Can we mention multiple message servers instead of single message server "rdisp/mshost = sapdeverp
    ms/http_port = 8100" ?
    Any suggestions ?

    Very right in mentioning this point coz myself have been confused over it but if I remove these lines & execute the -checkconfig:
    then it states as below:
    Checking SAP Web Dispatcher Configuration
    =========================================
    maximum number of sockets supported on this host: 8192
    Server info will be retrieved from host: : with protocol: http
    Checking connection to message server...
    ERROR: Connection to message server failed: NIESERV_UNKNOWN
    Check ended with 1 errors, 0 warnings
    More over accessing the servers give the following error:"
    500 Dispatching Error
    Error: -26
    Version: 7000
    Component: HTTP_ROUTE
    Date/Time: Mon Nov 29 17:28:11 2010 
    Module: http_route.c
    Line: 3139
    Server: solomon__03
    Error Tag:
    Detail: no valid destination server available for '!ALL' rc=13
    I have tried this actually, even tried the option ms/server_port_0 & 1 to replace ms/http_port but it didnt work either.
    Any more ideas.. ?

  • Info on Single CRM Instance vs Multi instance approach for ERP integration

    Hi All,
    I am working on a requirement where we have to propose integration approach to connect CRM with multiple ERP systems deployed across the geographical locations. We have two options, one is to have multiple CRM instances for each ERP instance or having a single CRM instance connected to all ERP instances. We foresee many issues on having a single CRM instance as there could be duplication of master data, solution cannot be Scalable or will be too complex, etc. if any of you have any docs/case study or ref link on this topic. Kindly pass on the same.
    Thanks in Advance.
    Regards,
    udaya

    Hi Udaya,
    As of SAP CRM 5.2, PI 2005.1 and higher, the standard SAP system technically supports the
    data exchange for a Multiple CRM scenario (MCRM). In this technical scenario the SAP ERP system
    is connected to more than one SAP CRM system.
    You can check SAP Note 1143540 & 842477. These 2 notes will give you an over-all idea about this scenario.
    You can also find a document under:
    service.sap.com/crm-inst --> CRM 2007 --> CRM Server Components
    Regards,
    L

  • Do we require HBA card for single instance database.

    Hi All,
    I have doubt that we are going to implement a single instance with ASM.
    Db version will 11gR2 as it is asm. My concern HBA is required for single instance oracle database.
    Please suggest.
    Thanks and Regards,

    The question is : do you want your user to be able ti use their application offline ?
    If yes, then you may provide them a local database and use a JDBC type4 driver. (The application is fetch directly from the server when first connected and then is able to lauch the applicaiton off-line) Such a network listen is allowed by the JNLP security model without any application sign !
    If no, then why not having a single database and some user debedant table that store the user specific data (as usual), and using a login dialog-bon (or an auto-logon mechanism) to restric identify and access your database thru some business logic via RMI or any ligh-webservice technology.
    Anyway you have plenty of solutions ..... it only depends of what are the exact needs.
    Regards,
    Jean-Baptiste Bugeaud
    WWW.UP2GO.NET - The JNLP Applications Repository

Maybe you are looking for