Any scenario where logical databases are not preferred?

Hi All,
Is there any scenario where logical databases are not preferred??
Thanks
Haritha

I agree with Rob. First, logical databases are viewed as obselete technology, although you will still find the use in the system, especially in HR module. But in my 6+ years of writing ABAP, I have never coded a program using a logical database, reason is simple, lack of control, and I think they are slow.
REgards,
RIch Heilman

Similar Messages

Any scenario where the Condition Contracts are used?

HI I am new to this forum. I have been through the defn of the Condition Contracts but still am not able to understand . Please throw some light on the same with some example.

The condition contract is a document with which you can record conditions that a partner e.g a vendor grants to a set of eligible partners e.g customers.
A condition contract consists of 3 components: 1. Condition contract header which contains info. regarding owner of the condition contract, a validity interval, the document status, currency information, exchange rate, terms of payment etc. 2. List of eligible partners containing the customers or vendors who are entitled to use the condition contract 3. Conditions i.e. the condition records
TYPICAL SCENARIO WHERE CONDITION CONTRACTS ARE USED:
Suppose a pharmaceutical company grants discounts and special prices to a group of hospitals for a range of medicines. A wholesaler must grant these special conditions whenever one of these hospitals places and order. Since the wholesaler has obtained the medicines from the manufacturer at the standard price, the manufacturer must refund part of the purchase price to the wholesaler if the latter has sold them at special conditions. In order to secure these special conditions, the wholesaler employs the condition contract. At header level, the pharmaceutical company is specified as the owner/vendor. Information relevant for settlement such as terms of payment, purchasing organization, settlement currency and exchange rates are also saved in the contract header. The eligible hospitals are either listed separately within the contract or are defined as an eligible partner list externally and included as a list. The special prices and/or discounts are defined in the conditions area of the condition contract. The period of time for which the agreement is valid is defined in the condition contract validity interval. If the special conditions are dependent solely on the type of medicine, you can use condition table A163. This contains, besides the condition contract number, only the material in the access. A release step can follow the document entry, since the conditions are available only after the condition contract is released. Then the special conditions are found in pricing for the sales order and the sales invoice if an eligible hospital has ordered one of the specified medicines.
Kirti hope this answers your question to some extent.
regards
PARAM

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.
Solutions?

No, I never really found an easy solution. I believe it is an issue with some corruption in the iTunes database on the specific device. In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs. A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup. It did work, so I imagine it would probably work for my current issues with the iPhone and iPad. But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost. When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might. If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it. I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

Table changes in database are not captured in ODI model level

Hi All,
Can any one help me how to fix the bug in ODI.
Table changes in database are not captured in ODI model level.
Thanks in advance

I created the interface which is running successfully.
Now i did some changes in target table(data base level).
I reversed the updated table in model section. Till here its ok
The table which is updated in the model section is not automatically updated in the interface.
I have to drop the existed datastore in the interface and and re do the entire process of bringing the updated datastore, mapping,etc..
Please tell the any alternate way.
Regards
suresh

Circular logical schemas are not supported

Hi,
I have created a repository in the OBIEE using the data model diagram supplied to me. I have dragged the entire physical layer model to form my BMM Layer Model.
I am getting the below error when I create my RPD. "Multiple paths exist to table A. Circular logical schemas are not supported."
Please note that there are no circular connections and I have double checked this.
When I try to delete the BMM Layer and keep only the physical layer,I do not get any consistency errors.
Someone please help.
Thanks,
Akshatha

Hi,
According to the docs-
Cause. The repository contains a circular logical scheme, which is not supported.
Response. Correct the repository so it does not contain multiple paths to the named table, and retry your actions.
Make in BMM star schema properly (dimensions, facts) with complex joins.
Check if you are having a star schema followed in BMM with proper fact tables and dimension tables and also 1:n joins.
Hope this helped/ answered.
Regards
MuRam

Why the BPMs are not preferred in general ?

Why the BPMs are not preferred in general is there any disadvantage ?

Yes..In general nobody is going prefer this BPM technic in terms of multimapping.Because it is bit of lenthy process and performance wise it is very poor due to some work process issue in the background.
ReddyGundala

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

Databases are not coming up after server reboot(sun solaris).

Hi
OS - Sun OS 5.10 local zone. RDBMS version - 11.2.0.3
Databases are not coming up after server reboot.
We have verified the below points.
Cat/etc/init.d/oracle
$ORACLE_HOME/bin/oradism file permissions are 4550.
lock_sga is parameter set to false.
cat /var/opt/oracle/oratab entries are set to Y
Still Databases are not coming up after server reboot.
Please advise.

Hi,
Can you post further information from alert log. Doesn't coming up, means you needs to share the information some thing about your environmente settings about kernel parameter and init$ORACLE_SID parameters details.
That would be easy for others to look into it further to analyze things.
- Pavan Kumar N

Missing emails, is any one else finding message are not showing up in email

missing emails, is any one else finding message are not showing up in email

Hi
Yes I have the same problem
Started a new hotmail account, have 5 or 6 emails in it in different folders, I could see them in the folders yesterday - today I go to the folders and they are not showing :-(
I've checked by using safari and going into the account and they're there, I've tried deleting the email account from the iPad restarting and creating again - iPad won't load them.
Has anyone got any ideas?
I've also tried changing settings but nothing.
Bob

Is there any there any scenario where we have to publish "Orchestration as WCF Service" and not "Schema as WCF service"

Hi All,
Recently in one interview a senior architect asked me this question-
Q- In which scenario we have to publish "Orchestration as WCF Service" and not "Schema as WCF service".
He also told there are some scenarios which can't be accomplished by exposing schema as WCF Service.
As per my understanding below are the benefits of exposing Orchestration as a web service, but there is no such scenario where we can't be achieved by exposing Schema as WCF Service.
Publishing orchestrations is a way to go when:
Implementing simple solutions with small number of dependencies when we have control over both consumer and service endpoints
* Rapid prototyping, proof-of-concepts, service stubs
* Developing local scoped services, when collaboration is not an issue
* Don’t care much about interoperability
* No skilled XML Schema, WSDL developers available
(http://geekswithblogs.net/paulp/archive/2006/03/21/72943.aspx)
Please share your inputs.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

First, the answer to the question as written is NO, because there really isn't a difference between the two options.
To be more specific, the only difference is in the Wizard itself in that when you publish an Orchestration, the Wizard reads the request/response schema(s) and Service & Operation name from the Orchestration Port rather than asking for them as it does
when you choose Publish schemas.
Basically, if you choose Publish schemas and enter the same values configured in the Orchestration Port, the output will be the same. So, publishing an Orchestration is merely a convenient shortcut.
Most importantly though, all of this only affects the metadata publishing. There is no difference in the Receive Location (BizTalk or IIS), if you chose to create one. The receive stack is schema agnostic, always.
In practice, the only thing the Wizard does that is difficult to do manually is organize the metadata, but I haven't had to create a metadata endpoint in years. The only reason I even run the Wizards is to create the IIS app.

Exchange Server 2010 SP3 Databases are not mounting after the recovery process

Hi,
We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
it.
I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
Please help me with your valid comments to solve and mount the database and close the issue for ever.
With Regards
Jay

Jared is correct that in essence the message is saying the DB cannot be found.
When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
When you restored into the recovery site do you have AD restored into that site as well?
For the recovery server are you using iSCSI storage for it as well? If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
and test/recovery server?
I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB. If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
http://www.lucid8.com/product/digiscope.asp using a free DEMO license. If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Logical Database QNQ not working when creating a query in SQVI

Hi All,
When i try creating a Quick Viewer Query using SQVI on Logical Database QNQ, I do not get any output.
What am i doing wrong?
Regards,
Jr.

Hi,
The blank row that you get from your second select statement would appear at the end of the report. Put that statement first and it should be at the top of the first page
Andy

The data from a table of a database are not retrieved in ADF BC Application

I have two separate ADF BC applications. Each application retrieve
the data from the same scheme of a database. Both applications work
well when I launch them under embedded OC4J. I have deployed
these applications to a standalone OC4J. When I launch one application,
the data from a database's table are retrieved. When I launch the other
application, the data from a database's table are not retrieved. Why? Please,
help me.

Any error message ?
Frank

Logical database PNP not retrieving data for custom infotypes.

Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamza

solved

Databases are not listed in the DBUA

Hi There,
The DB software upgrade completed and the DBUA popped up automatically. However, the two databases that exist are not showing up in the DBUA screen. Any suggestions, how to get the databases to show?
Thanks,
J

Thank you. However, the /etc/oratab has the following:
+ASM:/licensed/oracle/product/11.2.0/grid_11_2_0_3:N
db1:/licensed/oracle/product/11.2.0/dbhome_1:N # line added by Agent
db2:/licensed/oracle/product/11.2.0/dbhome_1:N # line added by Agent
However, the weird thing is I added another line to the oratab and it picks up the new entry:
db3:/licensed/oracle/product/11.2.0/dbhome_1:N
As well, I've changed the name of an exisiting database on line 2 and it picked that up:
+ASM:/licensed/oracle/product/11.2.0/grid_11_2_0_3:N
db1:/licensed/oracle/product/11.2.0/dbhome_1:N # line added by Agent
dbmodified:/licensed/oracle/product/11.2.0/dbhome_1:N # line added by Agent
Any ideas?
Thanks,
J

Any scenario where logical databases are not preferred?

Similar Messages

Maybe you are looking for