Any secondary schools in Central London (UK) using iPads?

I am trying to find a school in London UK that have already or have plans to use iPads in Secondary School on a larger scale.
I am planning a field trip for educators from Denmark who would like to know more about teaching and iPads.

Hi,
From what you report I am not sure why it is not working.
With an iPhone you could get issues in Different countries depending on your roaming contract and whether you get get given temporary access to the Local network.
However with the Apple ID  you should be able to get it anywhere.
With Mac OS X10.82 and above the Mac version though uses the Serial number of the computer to "prove" it is you.
Although your IP may change if a laptop or even change because it is dynamic from the ISP the serial number will not change.
I also know that with the AIM service some people have had issues when using Apple IDs ending in @mac.com in particular when they have been used abroad.
I see two possibles.
Add an Alternative email to the iPod Touch
Or try removing the Apple ID then putting the device in Airplane Mode for a few minutes then add back the Apple ID (I.e. re-register the Apple ID from your current location)
9:33 pm      Tuesday; December 31, 2013
  iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

  • Any limited access of international sim when using ipad cellular?

    if i purchased an Ipad in Singapore, is it usual to use Vietnam nano sim without any limitation? Do i have any other actions for setting up? (as I've seen in the website ipad wifi + cellular in Sing selling with contract with Star hub, singtel..etc?

    Yes I know. I work for an Investment Bank and luckily I had my iPhone to hand. The bank is/was considering the iPAD as an option for travellers but Apple need this to be sorted first. In the meantime simply remove the batteries from the keyboard when travelling. Other than this problem it's fantastic. I got loads done on the plane and happy to report I got 9hours of typing, music and video out of it during a flight from Heathrow to Vancouver and it was still showing 20% power left !!!! Brilliant !!!! Oh ... and Airport security didn't ask me to take it out of my briefcase like they do with my laptop.

  • Best place to buy a used iPad?

    I know the discussion has included Ebay, Craigslist and an Apple refurb. But what is the previous iPad model so I know what to look for on these sites?  I don't need cell; only wifi. And do they sell refurbs on the Apple site or is there another site?

    The only place to get devices refurbished by Apple is from the online Apple Store.
    As to iPad models, see:
    http://support.apple.com/kb/HT5452
    There aren't any truly "good" places to buy a used iPad other than from someone you know. Purchasing from any other seller is taking a risk, as you'll see if you peruse these forums for the number of threads where someone purchased a used iOS device only to find that it has Activation Lock and the seller can't be contacted or won't remove the lock. If you must buy a used iPad, at least buy from a vendor that has a return or dispute policy such as eBay or Amazon. I would avoid Craigslist like the plague; you have no recourse when purchasing from one of their ads.
    Regards.

  • Wec are using Ipads in a school and we like to block the configuracion. Is thre any app? or how can we do it

    We are using Ipads in a school and we like to block the configuracion. Is thre any app? or how can we do it

    What exactly is it that you want to block? The latest version of OS X offers MDM capability.  You can check out this:
    https://www.apple.com/support/osxserver/profilemanager/

  • Any good articles or case studies on using MS technologies for BYOD in education settings ?

    Looking to see if any good articles or case studies on using MS technologies for BYOD in education settings ?  (schools, colleges etc)

    Check if this helps:
    http://www.microsoft.com/en-us/download/details.aspx?id=39681
    Yuri Diogenes [MSFT] - http://blogs.technet.com/yuridiogenes

  • Central User Administration using EP

    Hi,
    Can any body tell me how we can do central user Administration using EP. My landscape has multiple SAP systems, BW system and EP system. How should we go about it?
    Any help?
    regards,
    Sujesh

    HI Sujesh,
    EP is not able to serve as a hub for central user administration in my opinion.
    You can connect EP to several user stores like LDAP servers (including Microsoft ActiveDirectory) and SAP Systems.
    So
    a) you store all your users in an LDAP and connect all your SAP systems to that LDAP
    b) you declare one of your SAP systems as central user administration (CUA) "master", connect all other as "slaves" and connect the EP UME to the master
    But in any way - there is no GUI inside the EP where you can administer all user related things like roles from all systems, etc. This can only be done in an ABAP system.
    Hth,
    Michael

  • BT Infinitity availability in Central London

    Hi
    I live in Central London, less than 100 meters from the exchange beneath BT Tower, which I suspect is one of the more modern ones in London...yet BT Inifnity is not available!
    I'm also the chairman of the residents association in our building (244 Flats, 800 residents) and I could quite easily arrange to mass a list of other residents who would gladly sign up to BT Infinity after BE/O2 sold out and we we forced to move to the shockingly bad Sky broadband.
    Please can someone explain if there is anthing I/we can do to increase whatever threshold you have to make BT Infinity a viable option
    Thanks
    Roger
    Solved!
    Go to Solution.

    If you use this checker it will tell what cabinet you are on and what services it can receive.
    http://www.dslchecker.bt.com/adsl/adslchecker.welc​ome
    If it does not show a cabinet number it will be because you are on an Exchange Only(EO) line. This means you can not get Infinity because you are not connected to a cabinet, instead you are connected directly to the exchange.
    Sometime in the future Openreach may install a cabinet out side the exchange and this will allow EO lines to connect to a cabinet. This however is not high on their priority list so may take some time.
    Use your phone number. If you don't have a BT number use the address checker. It is more accurate than the post code checker which can cover more than one cabinet.

  • FREEZE every 5min/Central London

    Hi there,
    Here is my problem,
    I just moved in a new flat clother to central London and since I am in this flat my connection is horrible.
    I did some speedtests and the connection is good 15Mbps Upload and 1.5Mpbs download.
    I check with the BT engine aswell and I got the same result.
    The problem is when I am playing or uploading big files.
    When I am playing I have freezes of 10sec every 2min.
    On all the devices connected to the box its written "CONNECTION UNSTABLE".
    I tried to disconnect every device and let only my computer plugged to the box but no changes.
    On my previous flat everything was perfect, nice connection zero disconnection, zero freeze etc...
    I tried different things that I have been reading on the forum but nothing changed.
    I have the BT hub 3.
    I would really appreciate if someone could help me as I am working from home and I have lot of files to send everyday.
    Regards
    Samy

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    are you using wireless or wired conenction?  if wireless have you tried wired to see if improves things?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

    Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

    Hi Jay,
    SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
    SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
    once on each server, and then the variable can be used by all the packages on this server.
    Regards,
    Mike Yin
    TechNet Community Support

  • I've got twin 12 year old boys and want to set I tunes accounts for them both, I need to be able to administer any purchases as they will need to use my bank account. How can I do this?

    I've got twin 12 year old boys and want to set I tunes accounts for them both, I need to be able to administer any purchases as they will need to use my bank account. How can I do this?

    What do you mean by administer?
    When you set up the account you have to enter a birthday and it has to results in being 13 years old or older.
    You can set a Restriction that hides the iTunes and App store and another one to prevent in-app purchases. See:
    iOS: Understanding Restrictions

  • Is there any way to get around having to use iDVD to burn DVD?

    Is there any way to get around having to use iDVD to export FCE to DVD?
    I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
    Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
    Chuck
    iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
    iMAC 1.25 GHz PowerPC G4   Mac OS X (10.3.1)  

    If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

  • When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

    When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

    You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

  • After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

    After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

    Turn off your firewall and antivirus software.

  • HT5429 I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

    I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

    Maps: Turn-by-Turn Navigation
    Argentina Australia Austria Belgium Brunei Bulgaria Canada Croatia Czech Republic Denmark Egypt Estonia Finland France Germany Greece Hong Kong Hungary Ireland Israel Italy Japan Latvia Liechtenstein Lithuania Luxembourg Macau Malaysia Malta Mexico Morocco Netherlands New Zealand Norway Poland Portugal Romania Russia San Marino Singapore Slovakia Slovenia South Africa South Korea Spain Sweden Switzerland Taiwan Thailand Turkey UK Ukraine USA
    Back to Top

Maybe you are looking for

  • Time Machine backup not a large as amount of space used on harddrive

    I just bought a new iMAC and Time Capsule and completed my first backup. In Disk Utility it shows that there is 151 GB of space used on the hard drive. The space used on the Time Capsule is 131 GB. I searched this topic and can't find it addressed be

  • Control 100 TFT

    Hello: I have no too much information yet but what I know now is to control about 100 tactile TFT´s. The application in Lingo show in each TFT one different picture, the user touch one of this TFT and something happens. Do you know what devices I nee

  • I could wish for a plugin to manage to open a LibreOffice calc sheet given as an URL in a HTML-page

    I have a bookmark page in HTML pointing to a series if topics in my pet-hobby. I would like to have the possibility to point to a (local) href in the list and open the subject as a calc-file in LibreOffice or OpenOffice just as easy as can be done wi

  • CRASHING: Unresolved kernel trap(cpu 0): 0x300

    Greetings everyone! HELP... My CPU is crashing! Was very stable for a over 3 months. All of a sudden it started crashing. Three times today. Never before this happened. Any idea what the report below reveals?. What to look for and where to look? Appr

  • TS4036 after 24 hours restore is still taking place, can i stop this

    I have now been restoring my phone for 24 hours having transferred all data from my old phone to new one via iCloud. Can I stop this now? It says you will not have transferred all data but it already appears to have transferred.