Any solution to a white screen with a battery icon with a lightning bolt through it on the Tour?

My daughters blackberry tour suddenly stopped taking a charge and would not power on. It just shows a white screen, with a battery shaped icon & lightning bolt through it. Went to our local cell store and they did a battery swap for us. The phone worked for about 2 hours then did the same thing. After a couple more swaps with no change, they un installed and re-installed the software. This again fixed it temporarily. When it quit again, we were sent a replacement phone. The replacement did the same thing. We were sent a 2nd replacement, but in the meantime, the first replacement started working. It worked for about a week then did the same thing. Now we have attempted to activate the 2nd replacement and it gets the same screen and will not charge enough to even activate it. I'm working with the customer support (phone is under warranty still), but so far no solution. Anyone else experience this? I find it strange that we now have a 3rd phone, doing the same thing and we have tried new batteries and an new charger.

Here are some good charging tips, please read and you'll see that many of them will apply to you.
http://www.blackberryfaq.com/index.php/Maximum_Battery_Life
And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
Read this article also: http://www.blackberry.com/btsc/dynamickc.do?externalId=KB18223&sliceID=1&command=show&forward=nonthr...
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
* http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
*http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache

HT1199 my MAC has white screen with folder and question mark anyone have the same issue?

My mac has a white screen and a file folder with a question mark...anyone else have this issue before?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(79884)

Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

Are you sure about your hard disk health, any clicking noice recently?
Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

IMac 21.5" boots to white screen with vertical blue lines/bars then locks up

iMac 21.5" (mid 2010) Intel Core i3 4GB RAM with Radeon HD 4670 boots to white screen with vertical blue lines/bars:
Then it locks up after a few minutes, at which point the screen changes to white with these blue symbol things all over the screen:
If boot to Safe Mode, it still has the white screen with blue lines/bars, but eventually loads the login screen and I can successfully login and get to the desktop, but even that has the bars/lines.
Eventually, after enough restarts or hard shutdowns it will boot normally with no video/display issues. I've run disk checks, did the SMC and PRAM resets, checked logs (that I know of), and have even taken it completely apart, cleaned it out, reseated everything, put it all back together, but no change. I've read a few other posts about similar issues (but not quite the same video issue as this) where people had the logic boars replaced or reinstalled OSX, but that didn't always fix it. Any ideas? Has anyone seen this issue before? Thank you.

crw4096 wrote:
Is this a dead disk?
Very well could be.
If you can not startup from the Hardware Test, in Safe Mode or from > OS X Recovery as discribed in the Support article's.
Dig out the original Install Disc set that came with the iMac and do one of the following.
1. Attempt to Repair the Hard Drive.
Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C key.
When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your Mac OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
2. Run the Hardware Test from the second Install Disc.
1. Insert Disc 2 and Startup holding the D key.
2. Select the Extended Hardware Test.
Then if you still can not get anything going, you need to contact your Local Apple Store or AASP and make a Service appointment.
see > Apple - Find Locations

TS1812 Hi Everyone, I have tried all the solutions mentioned by apple and still have a white screen with a blinking file folder with a question mark in the center, anyone have any ideas or experienced this?

Hi Everyone, I have tried all the solutions mentioned by apple and still have a white screen with a blinking file folder with a question mark in the center, anyone have any ideas or experienced this?

Nooo or you would use OS X Recovery Mode: Disk Utilty and then Startup Disk.
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
ExpressLane
https://expresslane.apple.com/
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725

I have a iMac (20-inch, Mid 2009). On start up It will sit at the White screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

I have a iMac (20-inch, Mid 2009). On start up It will sit at the white screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My macnotebook is showing a white screen with a file with? any idea

my macbook is showing a white screen with ? iside a blinking file . any idea ?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My Ipod is stuck on a white screen with the wrong time and a lock. computer doesn't recognized my Ipod..also gets hot when connected to charge..any ideas on how to fix this? Thank You

Hi
My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than You

If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase.

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

Read this article...
http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

Installed itunes 10.7 today but the restart is frozen at the white screen with the rotating wheel. Any help is appreciated.

I installed itunes upgrade (10.7, I think) today but the restart is frozen at the white screen with the revolving wheel. Any suggestions?

Thanks for your reply
I tried Disconnect devices and network cables nothing
I can't Perform a Safe Boot i press shift key but nothing
I tried Reset the NVRAM / PRAM nothing
Now i am downloading lion os again "god help me"
For this step Start from your Mac OS X Install disc; use Disk Utility
(why apple stop Mac OS X Install disc ??? it is not a good idea )
Check your cables and power source
It is ok
Remove third-party RAM and internal hardware
Did not upgrade
Is there another fixes in case i couldn't download Lion os

On start up my mac book pro shows a white screen with a folder with a ? in it then switches to the apple symbol with the loading bar under it but it freezes about half way any ideas

My mac book pro on start up shows a white screen with a folder with a question mark in it then switches to the apple symbol with the loading bar under it but it freezes about half way. Only started to have problems since upgrading to yosemite any ideas.

I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed: OS X: About OS X Recovery - Apple Support

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

Mac OS X: Gray screen appears during startup

My mac won't boot up, just has a white screen with a blinking ? mark, any suggestions?

my mac won't boot up, just has a white screen with a blinking ? mark, any suggestions?

this usually means the software and hardware can't find each other for whatever reason the following article addresses this issue:
http://support.apple.com/kb/TS1440
can also do apple hardware test, following article on that:
http://support.apple.com/kb/HT1509
if you can't access the apple hardware test in the above article you can also do fsck command to check the hardware as well, following article tells how to do that:
http://support.apple.com/kb/HT1782
hopefully one of these articles helps w/ resolution!!

Any solution to a white screen with a battery icon with a lightning bolt through it on the Tour?

Similar Messages

Maybe you are looking for