Any solution to purge command not accepted in terminal
Any solution to purge command not accepted in terminal after upgrade yo OSX mavericks?
Type 'sudo purge', then enter
It will ask for your admin password. Type and press enter again.
That's it!!
Similar Messages
-
I have 10.6.8. When I type "purge" in Terminal I get: -bash: purge: command not found Is there another built-in command to clear memory leaks? I have FreeMemory (works well) and considering FreeMemory Pro, to clear memory periodically, say every 20 minutes, or preferably when a threshold is reached, say when only 100MB is available.
To get purge to work you need to install Xcode from Optional Installs on the 10.6 install DVD. Also be sure you install CHUD Tools with it.
But running purge or anything like it is pointless if within a short period of time the VM just grows back again. Sounds like you need more RAM.
Where are the memory leaks? Just because the VM reaches a certain size doesn't necessarily mean it's from a memory leak. -
MLS QOS commands not accepted on 3800...what's the alternative?
ging from 3750 to 3800, MLS QOS commands not accepted on 3800...I'd heard that this command was deprecated, how do we translate our QoS statements onto the new platform?
To clarify, our 3750 mls qos statements are as follows:
mls qos map cos-dscp 0 8 16 26 32 46 48 56
mls qos srr-queue input bandwidth 90 10
mls qos srr-queue input threshold 1 8 16
mls qos srr-queue input threshold 2 34 66
mls qos srr-queue input buffers 67 33
mls qos srr-queue input cos-map queue 1 threshold 2 1
mls qos srr-queue input cos-map queue 1 threshold 3 0
mls qos srr-queue input cos-map queue 2 threshold 1 2
mls qos srr-queue input cos-map queue 2 threshold 2 4 6 7
mls qos srr-queue input cos-map queue 2 threshold 3 3 5
mls qos srr-queue input dscp-map queue 1 threshold 2 9 10 11 12 13 14 15
mls qos srr-queue input dscp-map queue 1 threshold 3 0 1 2 3 4 5 6 7
mls qos srr-queue input dscp-map queue 1 threshold 3 32
mls qos srr-queue input dscp-map queue 2 threshold 1 16 17 18 19 20 21 22 23
mls qos srr-queue input dscp-map queue 2 threshold 2 33 34 35 36 37 38 39 48
mls qos srr-queue input dscp-map queue 2 threshold 2 49 50 51 52 53 54 55 56
mls qos srr-queue input dscp-map queue 2 threshold 2 57 58 59 60 61 62 63
mls qos srr-queue input dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31
mls qos srr-queue input dscp-map queue 2 threshold 3 40 41 42 43 44 45 46 47
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3 2 4
mls qos srr-queue output cos-map queue 4 threshold 2 1
mls qos srr-queue output cos-map queue 4 threshold 3 0
mls qos srr-queue output dscp-map queue 1 threshold 3 40 41 42 43 44 45 46 47
mls qos srr-queue output dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31
mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 54 55
mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 62 63
mls qos srr-queue output dscp-map queue 3 threshold 3 16 17 18 19 20 21 22 23
mls qos srr-queue output dscp-map queue 3 threshold 3 32 33 34 35 36 37 38 39
mls qos srr-queue output dscp-map queue 4 threshold 1 8
mls qos srr-queue output dscp-map queue 4 threshold 2 9 10 11 12 13 14 15
mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7
mls qos queue-set output 1 threshold 1 138 138 92 138
mls qos queue-set output 1 threshold 2 138 138 92 400
mls qos queue-set output 1 threshold 3 36 77 100 318
mls qos queue-set output 1 threshold 4 20 50 67 400
mls qos queue-set output 2 threshold 1 149 149 100 149
mls qos queue-set output 2 threshold 2 118 118 100 235
mls qos queue-set output 2 threshold 3 41 68 100 272
mls qos queue-set output 2 threshold 4 42 72 100 242
mls qos queue-set output 1 buffers 10 10 26 54
mls qos queue-set output 2 buffers 16 6 17 61
mls qos
What would all this translate to on the 3800 platform? -
Sync from iPhone to iCal on MacBook has failed since the latest iPhone upgrade, yesterday. It's worked in reverse, and all other sync operations appear to have worked. Any solutions, that I may not have already tried (over and over)
(Sorry, first time user of these forums, and it's confusing in it's own right)You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
is there any solution for wifi & bluetooth (gone grey), not working in 4s post IOS 7.0.4 update?? pl require a solution badly !!!
If they are grey then the WIFI card has gone bad at this point, service would be needed
-
Basic commands not working in terminal?
I have been attempting to set up i2p on my computer, and noticed that terminal responded to any command, no matter how simple, with "Command not found".
After doing a bit of research across support communities, it seems that my problem lies within my PATH settings, and I need to fix them in order to be able to use commands again. I've tried multiple suggestions seen here on the suppport forums but none have worked so far. When I input /bin/echo $PATH I get the following:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/MacGPG2/bin:/usr/local/m ysql/bin
Help!Do you have a backup of this disk? If not, go get one of those now.
Do you have a pointer to whatever directions or installer tools you were following or using? (So we might see what's been suggested and the steps you've followed here.)
Do other logins work? If you log in as a different user and launch Terminal.app and try some commands, does that environment work?
Your PATH looks OK — you have the important bits /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin — and the rest of what's there shouldn't be relevent to commands such as ls, cat or mv, so the next question would involve whether the tools and files and directories themselves exist.
Do explicit paths such as /bin/ls, /bin/cat or /bin/mv work as expected? (Most of the core commands for the command line environment are located in /bin). Try the following command:
/bin/ls /bin
That command should displaty ~37 common shell commands and tools. -
Any solutions to the DNS not resolving IPv6 problem?
Hello,
Does anyone know how to fix the broken DNS behaviour that was introduced into OS X sometime since 10.4? I'd like to have my systems be able to resolve AAAA addresses, but Apple seems to have broken DNS resolution (probably in response to people complaining about problems which are a result of other IPv6 equipment which are broken!)
Note that this has nothing to do with whether IPv6 works. It does. It's just that OS X's DNS resolver does not return AAAA records at all. Take a look:
[lain:~] john% ping6 andromeda.ziaspace.com
ping6: No address associated with nodename
[lain:~] john% host -t aaaa andromeda.ziaspace.com
andromeda.ziaspace.com has AAAA address 2001:4830:1200:17::2
[lain:~] john% ping6 2001:4830:1200:17::2
PING6(56=4088 bytes) 2001:4830:1700:18::2 --> 2001:4830:1200:17::2
It'd be nice if Apple had a technote or a preference somewhere...
Mac mini Mac OS X (10.4.6)
Mac mini Mac OS X (10.4.6)If i recall the message is about DirectPlay?
When i installed and ran pse 12 on windows 8.1, windows offered to turn that on.
You might have to go to the Control Panel>Programs>Programs and Features>Turn Windows Features on or off>Legacy Componets>DirectPlay -
i am using macbook air, after upgrading to os x mavericks, i am not able to mount my seagate 1 TB go flex hard drive, also iphoto upgrades crashes mid way ... what to do ?
What exactly crashes? iPhoto upgrades to a library or the application?
What format is the external HD?
OT -
My camera is not working. any solution, My camera is not working. any solution
My Back camera stopped working sudenly. My front cam is working but gets hanged up after taking few shots. Plz advice.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Sudo command not working in terminal
When I was trying to perform a action in terminal it was saying "permission denied". When I tried it with the sudo command it was showing the following error.
Can anyone please help me out in resolving this error.
Thanks & Regards,
Teja.Hi,
Thanks for the response. I have tried the procedure suggested by you. But I was struck up with this issue. "repair disk permissions" option is disabled. So can you help me out in finding a solution.
Thanks & Regards,
Teja -
After downloading IOS 8.0.2 I can not connect to the internet, any solutions?
It is not the wording but the lack of detail.
The iPhone connects to both the phone network (3G, LTE, etc) and to WiFi networks. Which one (or both) are you having issues with?
If it is the phone network, go to Settings->Cellular and see if Cellular data is turned on globally AND for the apps you wish to use.
If it is a WiFi network, go to Settings->Wi-Fi and see if you are connected to a network. If so, touch the circled "i" next to the network name and see that you have a valid IP address, etc. (take a screen shot and post it if you don't know what to look for). -
Itunes producer does not accept itmsp file
Having a problem with ITPR accepting the .itmsp package. Neither dropping from Finder nor selecting choose and navigating to file will allow file to drop (greyed out via Finder attempt to open).
Not sure what the problem is…I changed “textbook” to Book on first pane in ITPR because this book is not a textbook, but a book of images. I tried to change back to textbook, but that option is no longer available?
Since all the data is entered I would really prefer not to start from scratch….if it is choosing "book" rather than “textbook” which was mistaken, how to undo?
But that is a guess - any other reason ITPR would not accept the .itmsp file but does accept .ibooks file?
any help appreciated,No red K T. To make sure we are on the same page (pane): ITPR>ASSETS with two placeholders...
The issue is that ITPR does not recognize the itmsp file - won't accept it. No error return, just nada.
FWIW, I decided to start again because I've become convinced there is a glitch in ITPR (I've written feedback)
This time I set prefs in iba to open itpr on creation of the itmsp. (That is a lot of abbreviations )
ITPR opens up WITH the itmsp file preloaded and accepts the droppped ibooks file. I am currently re entering 32 price listings - a terrible waste of time. Hope you can add the feedback I just have to the iba and itpr teams.... -
Hi, I have a problem on the ipod with this file "metadata_never_index". My PC doesn't recognise it. I need the program Apple Spotlight but I can't download it as well. Why? Any solution?
I am not doing it in ITunes, but i did down load the song from ITunes. I loaded the song on to my Nano, but in my menu selections it doesn't show the song or the artist in any search format. However, when i plug in my nano to my PC I see the Nano library on my PC drive listings and that song and artist are there. I can click on the song and it will play in Windows media on my work PC. I did notice that the format for most all the songs in my library on my Nano are MPEG - 4 audio Files.
Thanks for your help, Mel -
My Mac which is 3 years old will not accept anything in CD drive
There is nothing in there - any ideasWhen you say "Will not accept DVD", do you mean it takes them in and ejects them, or it just wont take them in?
Thanks,
Ollie. -
Computer crashes/hangs and does not accept any command?
why after opening Windows, computer crashes and does not accept any command?
only solution (compromise) which I found is to disconnect and reconnect the PC unit; Windows runs properly after the surgery to close it; next morning found the same problem...Hello Liviu,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how after your computer loads Windows, it locks up or freezes, and I would be happy to assist you in this matter!
For further assistance, I will need to know:
The Product and Model Number of your desktop computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If you have added any new software or hardware to your computer.
If the computer is plugged directly into a wall outlet.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
How to flush the loaded bytes of a Sound object
Hi all, I've now been looking for a solution to my problem for quite a while now, but so far without any success, so I thought I'll give this forum a try.. maybe someone in here can help ;-) Ok here's the deal: I'm trying to create a simple audio pla
-
Problem to display a checkbox in PDF generated by XML Publisher
Hi All, i need your help, i have create and PDF template with checkbox field. when i generate the report from Oracle Application using XML Publisher all is fine only the filed checkbox which is inactive, i can't do any check/Uncheck in the filed. Tha
-
I keep getting error code-3000 error at itunes store try again later?
I keep getting error code -3000 error at itunes store try again later what the heck?
-
BEx Query Analyzer - 64bit version of Excel
Hi there Does SAP have plans to support 64bit versions of Excel 2013? We have power users using 64bit version of Office due to the size of their datasets. They then can't use BEx tools on their PC. Thanks
-
I am running Mac OS X 10.5.8 and Firefox 10.0.1