Any solutions for native soundtrack going out of sync when adding titles et

With the 6.0.4 update to iMovie06HD a problem emerged which the Apple Store Geniuses have been unable to solve, even after spending days with my computer/camera. When I add titles and transitions the native soundtrack goes out of synch. Previous versions of iMovie06 (in place this time last year) worked fine. Reloading the software didn't solve it, and the problem also exists on other computers running 6.0.4. Unfortunately going to iMovie08 is no solution as it does not allow 'export to tape', thereby offering no option for creating an HD movie. I tried in 08 making a DVD but image quality even using 'large' is not good.
Has anyone experience this? And found a solution?
ens2

If I output this sequence at 1920x 1080 no down scaling to 720 then it is in sync but the whole project is then too large to fit on a single layer Blu-ray disc this is why I have down scaled 720.
The only two factors which affect file size are bitrate and duration, specs like resolution and frame rate have no bearing.
Try using 1080 with a lower bitrate.

Similar Messages

Linked video audio clip goes out of sync when put in timeline - why?

Learning to use Final Cut Express. Clip plays in browser with audio in time with video but as soon as clip is dragged onto timeline the audio goes out of sync. Why? Please can anyone help because its driving me mad!

You don't give any details as to FCE's settings, camera format or your workflow so I can only hazard a guess.
One of the main reasons that audio goes out of sync is because the Easy Setup audio settings do not match the camera's audio settings.
The default setting is for 16bit (48KHz) but your camera may be shooting 12bit (32KHz audio).
If this is the case you need to recapture using the 32KHz Easy Setup.

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

Audio goes out of sync when i open project on diff macs

i have an iMovie project created on an iMac saved to an external.
I go to open the project up on my macbook and the audio is out of sync.
I go back to my iMac with the same project and it works just fine.
I'm a bit confused because both macs use Mac OS X 10.6.4 and iMovie 8.0.6
what other differences might there be?
any input is appreciated as I'd love to work on projects while out in the field!

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Audio goes out of sync when I export to iDvd.

Anybody have any idea what this could be, and how to fix it?
Everything's fine on iMovie, the audio syncs up fine to the video, but in iDvd, the audio seems to have randomly shifted all across the video.
It's not all the audio, some of it is still in place (but with other sound layered over it).

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Audio goes out-of-sync after adding photos to video

iMovie HD 5.0.2 here. I have one main 10-minute video clip and am trying to splice the video to include a few photos, which maintaining that video's audio track throughout.
After importing the video, I extracted the audio. But when I dropped in a photo, any video AFTER that photo is now out-of-sync with the audio track. (I'm not really fiddling with the visual timeline; I just split the video clip at playhead, insert photo, and any video after the photo winds up out of sync.)
Is this a problem with the dated software? Is there a workaround? If I should upgrade, what should I upgrade to? I really love the simple video and audio timeline of iMovie HD; it's perfect for my needs and I don't want to lose it...

OK
I'm a soft head. Now I understands what You want to do.
OK there is a smart way to exchange video for a photo but keeping the audio. BUT
I use a much more raw way of doing this.
I import my photo. Set a duration for it eg. 4 sec => 00:00:04:00 exactly
then I select the video clip
Extract sound - so that I don't affect this when doing the brain surgery
Cut in the video part away exactly 00:00:04:00
Select the photo clip - drop this before the un-needed video clip
Select the un-needed video clip and delete this.
Now I've replaced a pice of the video with a photo but the sound flows as it
was un-tuched.
I always work this way - think it has to do with super-8 film editings during
the stone-ages.
There is a function in iMovie that does this - replace action but I've never used it.
Yours Bengt W

Audio goes out of sync when Blu-ray folder is exported from Encore CS6

I compile a project in Encore using H.264 and .wav files. The audio plays fine directly from the timeline. It also plays fine when I preview it from Encore. When I finally export it as a set of Blu-ray folders, the audio exports out of sync with the video. It is approximately 6-7 seconds ahead of the video. What am I doing incorrectly? When I mux the files into an .MKV, the video is in sync with the audio so I know the files themselves do not have different start times.
I am running with an HP Z820 with Windows 7, 64-bit OS and 16GB RAM.

For anyone who's interested, I found a solution to this problem. Once imported into Encore, the leader in on the video and audio files cannot be trimmed at all. (I had been trimming the beginning of the video and matching audio file to eliminate the 8 seconds of dead space at the start of the clips.) Although the trim took effect immediately in the Encore timeline and I could also watch it in preview in sync, exporting was another story. The audio track seems to retain the trim when exporting but the video track does not, hence the 6-7 second delay between audio and video.
I reimported the files to my project and left in the 8 seconds of dead space at the start and voila! The video and audio match up when exported.
Ideally the trim tool would just work as its supposed to through export and all, but at least I found a solution I can work with.
(As a note, the trim works just fine in export on Encore CS5. I only had this problem with Encore CS6.)

Rate Stretch audio goes out of sync when exported.

Audio, which is rate stretched using the rate stretch tool to 100.01%, plays fine in Premiere Pro CS6. However, when exported to Encore or to MPEG-2 file, the audio is no longer stretched and becomes out of sync by the end of the video. When I play the preview in Encore, the audio is out of sync. Switch back to Premiere, it is OK. Export a MPEG-2 file and author a DVD, the audio is out of sync. Go back to Premiere, it is OK. I record the audio using a TASCAM portable recorder. I have recorded and synched audio many times and this is the first time that it does not work, on two separate Premiere projects. Any ideas on how to fix this. Even better, is there a way to record audio so that it matches the video (from a Panasonic HD AVCHD camcorder) without requiring rate stretch adjustment?

Try changing the speed with right click, Speed/Duration instead of using the Rate Stretch tool.

How do I stop my video & audio going out of sync after adding a still.

Audio/Video Settings - Sequence Preset HDV - 1080i50, Capture HDV, Device preset SonyHDV 1080i50 Firewire, Vid playback Digital Cinema Desktop Preview-Main, Audio Default.
Easy Setup - Format HD, Rate 25.00fps, Use HDV.
Sequence Settings - Gen. Tab Frame Size 1440 x 1080, Aspect Ratio HD (1440x1080) (16:9), Pixel Aspect Ratio HD (1440x1080), Anamorphic unchecked, Field Dom. Upper(odd), Editing Timebase 25, Quicktime settings HDV 1080i50, Quality 100%, Audio Settings Rate 48kHz, DEpth 16 bit, Config Channel Grouped.
I have not tried reloading FCS.

Hold your horses everyone, I've done it ,Yippee!!
It's all down to Percy, that is perseverance, I do not like to give up.
Under Sequence in the Menu bar I clicked on Sequence Settings. There under Render there is a Render Control tab. I changed the codec from 'Same as Sequence Codec' to 'Apple ProRes 422 [HDV, XDCAM HD/EX/HD422 only]' and everything is back to normal, even the pixelating text (see an earlier post of mine). The rendering is quick as well. The world is my oyster.

When i tap "update" on an app, or try and download a new app i get the loading wheel for around a second then it goes back to showing "update" and does nothing. Any solutions for this?

When i tap "update" on an app, or try and download a new app i get the loading wheel for around a second then it goes back to showing "update" and does nothing. Any solutions for this? This is relevant to an iPhone 5S running iOS 8

If you're really running iOS 8, you should be posting in the Developer's Forum, as you well know since you signed an NDA when you signed up for the Developer's program.

TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

My boss is using Mac machine, whenever I send email from my windows machine he receives email as winmail.dat, is there any solutions for this ?

My boss is using Mac machine, whenever I send email from my windows machine he receives email as winmail.dat, is there any solutions for this ?
My boss is using Mac machine, whenever I send email from my windows machine he receives email as winmail.dat, is there any solutions for this ?

Upgrading my work PC is NOT an option, but I'd like my Mac to be able to recognise the attachment for what it is
Let see, you are using a proprietary file format that is only supposed to work with Outlook. It doesn't work for millions of Windows or Mac or Linux email users that depend on other email programs like Outlook Express, Thunderbird, Apple Mail, webmail, etc.
Microsoft has had to publish instructions so that their program's users can make themselves compatible with the rest of the world.
http://support.microsoft.com/kb/290809
You are causing your own problem by not making a simple change in your program's options. Changes in the Outlook preferences can be made either Globally or by the Recipient.
Follow these steps in Outlook 2007 to turn off TNEF:
1. On the Tools menu, click Options.
2. Click the Mail Format tab.
3. In the Compose in this message format box, click Plain Text or HTML, and then click OK.
Don't know of a better way to fix this problem for everyone concerned. Even if you get the fix to work with your machine, you will not enable all of the people receiving your emails to be able to work with you. That's a losing battle that's been caused by Microsoft.
Now if Microsoft created a Mail plugin for other email programs like they do for their video format's and services (flip4mac, Office Live Plugin, etc), then I would consider using their email program to deal with my clients. Until then, I need to be compatible with many different programs in other countries, on different platforms. Maybe that's going to change when they bring out the new Office 2011 with Outlook for the Mac...

I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new. If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

Guys, i am actually trying using a solution provided by the article shared by dominic23,
It says "Another option is to get an ionizer to help the atmosphere in the workplace be more conductive and pull charges away from contact surfaces, including yourself."
So in my home, we have such device that could clean the air using ion, and i am using it in my room...
Result: BANG!!! The electric shock on my macbook has gone!! I don't really care about physics but somehow it works! You guys should give it a try.
Thanks again dominic23

After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.

Any solutions for native soundtrack going out of sync when adding titles et

Similar Messages

Maybe you are looking for