Any solutions to error 1417-1418??

Hi,
I'im looking for a solution for the error 1417-1418.

some folks have been having some success with eboncairn's technique:
eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

Similar Messages

  • Ipodmini--error 1417/1418 and no music

    when i plug in my ipod it connects, but when i try and update it says error 1417 - if i try and restore it says 1418, SO CONFUSED! also, when i try to play music after its unhooked, it just skips thru each song per second going from one to the other. SOMEONE HELP PLZ

    The program opens but will play no music. Error message reads: Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly
    that one is usually produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    so let's try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch/play properly now?

  • Any Solutions to Error 4280?

    Has anyone found a solution to the 4280 error message when trying to burn a CD?
    Below are my CD Diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    TOSHIBA Satellite M45
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Pfc (2.5.0.204), Iviaspi (1.0.0.0), sscdbhk5 (1.0.0.1), Cdr4_xp (6.2.0.132),
    UpperFilters: Cdralw2k (6.2.0.132), GEARAspiWDM (2.0.6.1),
    Video Driver: Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family\Mobile Intel(R) 915GM/GMS,910GML Express Chipset Controller
    IDE\DiskFUJITSUMHT2080AT_______________________0022___, Bus Type ATA, Bus Address [0,0]
    {E9C3AF91-1F3B-474f-B307-1ECE7FF4AF41}\GenDisk, Bus Type USB
    IDE\CdRomMATSHITADVD-RAM_UJ-830S________________1.00___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: MATSHITA DVD-RAM UJ-830S, Rev 1.00
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive D: MATSHITA DVD-RAM UJ-830S on CDR media at speed 4X.
    Toshiba M45-S331   Windows XP  

    Create a new playlist, drag and drop the songs that you want to burn to that playlist, burn playlist

  • Any solutions for error code r6034

    anyone find a solution for fixing error code r6034?

    Hi fcianci,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • The way I deal with error message 1417, 1418 and 1428

    Firstly, sorry for my poor English, but I would like to share with you my experience, and hope that it may helps you.
    Since the release and update of iTunes 7, I have not faced any problem, but I heard a lot of articles from this forum about the errors 1417, 1418, 1428 and 50 etc. I could not make any suggestion and find a solution about it, all I could do is to copy some threads from some successful cases mentioned on this forum.
    Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
    I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
    1. A window based PC
    2. A Mac computer
    3. An USB iPod cable
    4. A Firewire iPod cable
    5. An iPod AC charger
    As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
    How to reset iPod
    http://docs.info.apple.com/article.html?artnum=61705
    The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
    I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
    I changed my mind, and put the iPod into disk mode
    Putting iPod into disk mode
    http://docs.info.apple.com/article.html?artnum=93651
    Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
    I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
    This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
    Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
    Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
    The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
    However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
    This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
    I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
    From the above experience, I would like to share it with the user the following:-
    1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
    2. Try to connect the iPod with a computer, switching between USB and Firewire
    3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
    4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
    I hope the following works in your case as I did.

    a pop up error message says itunes couldnt be configured
    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

  • Unknown error (1417) and (1428)

    Hi,
    I have updated Itunes to version 7 and I'm trying to do the same for my ipod (version 1.2) but everytime I try, it give me a error window.
    When I try to update - The unknown error is (1417) and I also tried to restore instead and still gave me an error, but (1428).
    I've tried to restart my ipod, and to reinstlled itunes but nothing makes it.
    Thanks

    Some people have had success trying the fix mentioned here.
    Error 1417/1418.
    Could you also take some time to pass some information for the Apple Engineers?  Please copy and paste these questions into an email, make the subject of the email "iPod error report", add your answers, and send the email to Roy at Apple.
    1. What error code are you seeing?
    2. When are you seeing it (restoring or updating your iPod)?
    3. Which iPod do you have?
    4. What version of Windows do you have?
    5. What Windows service pack do you have installed?

  • Unknown error 1417 and 1418?

    Help! I've installed an iPOD nano, previously used an iPod mini. It recognises the nano but can't download any msuic. Reinstal and Restore failed with unknown error 1417 and 1418. I've uninstalled old iTunes and iPod software and downloaded the latest iTunes and it still doesn't work -also noticed that the old name for the iPOD mini has been tranferred to the iPod nano but can't delete this - any ideas?

    Thanks Kyle, you solved it - the Ipod was connected to a powered 4 way USB2 adaptor - when I connected it direct to a USB2 port in my desktop it worked OK. For all other 1417 sufferers: get rid of your USB adaptors, iPods obviously can't cope with sharing a port!
    In answer to your question about the iPod mini it had one of those hard disk failures which shows a sad face - very sad when the repair bill is a standard 75GBP - over 100US$. Only 18 months old.
    benwal
    Hi Benwal, and Welcome to Discussions!
    First, as it may help troubleshoot, what happened to
    your iPod mini, or why was it replaced?
    Here is an Apple Support link that might help you
    out. Error 1415, 1417, 1418, or 1428 when restoring
    or updating an iPod in iTunes 7 or later
    Kyle-

  • I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

    I am having iPod classic 120GB Serial Number:8K913VF:2C7
    I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
    How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • I just brought a apple protection plan as my phone warranty is going to end in a day, when i am trying to enter the protection plan code and my phone serial no its showing an error message try after some time is there any solution to that?

    i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
    As i need the warranty to extend for another year please help me regarding this issue.
    When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?

    Here is some information on the applecare +:
    http://www.apple.com/support/products/iphone.html
    It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

  • Any solution for Windows 8.1 System Image Backup on DVD fails with error 0x80040154??(apart taking backup in external drive)

    Windows 8.1 is facing a problem while taking System Image Backup on DVD, it pops an error saying  0x80040154 and more it says that class is not registered , i am trying from days to find some optimum solution for it apart from taking it on external
    hard drive...any suggestion please let me know asap!
    regards!
     

    Hi,
    Check this article first:
    0x80040154 error may occur when you create a system image backup in Windows 8.1
    http://support.microsoft.com/kb/2934165/en-us
    Please capture the system event during you reproing this issue by using Process monitor:
    Process Monitor v3.05
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    If there is any Access denied error, follow this blog to solve this issue.
    Solving Access Denied Errors Using Process Monitor
    http://improve.dk/solving-access-denied-errors-using-process-monitor/
    You can also upload the saved log file here for our research. Please upload them to a file sharing service like Skydrive or "Rapidshare" and put a link to them in your reply.
    Kate Li
    TechNet Community Support

  • My iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this,  I want to restore my phone to factory settings and reinstall my data but cannot back up first.

    my iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this,  I want to restore my phone to factory settings and reinstall my data but cannot back up first. Original problem is that I cannot connect to any wifi system anymore - have tried resetting network settings but did not work.

    Try 1 step at a time and do a backup, if no joy then do the next step:
    1. Switching off your anti-virus and firewall.
    2. Computer iTunes menu > Edit > Preferences... > Devices > delete your backup

  • I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

    I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

    Download a free app and try again, you can delete the free app afterward.

  • I get error Eo6 when trying to access my portfolio. Any solution?

    Whenever I try to see my portfolio, I get the unable to load message, showing Error E06.
    Any solution?

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for